Effect of Selected Crosslinking and Stabilization Methods on the Properties of Porous Chitosan Composites Dedicated for Medical Applications

Chitosan is one of the most commonly employed natural polymers for biomedical applications. However, in order to obtain stable chitosan biomaterials with appropriate strength properties, it is necessary to subject it to crosslinking or stabilization. Composites based on chitosan and bioglass were prepared using the lyophilization method. In the experimental design, six different methods were used to obtain stable, porous chitosan/bioglass biocomposite materials. This study compared the crosslinking/stabilization of chitosan/bioglass composites with ethanol, thermal dehydration, sodium tripolyphosphate, vanillin, genipin, and sodium β-glycerophosphate. The physicochemical, mechanical, and biological properties of the obtained materials were compared. The results showed that all the selected crosslinking methods allow the production of stable, non-cytotoxic porous composites of chitosan/bioglass. The composite with genipin stood out with the best of the compared properties, taking into account biological and mechanical characteristics. The composite stabilized with ethanol is distinct in terms of its thermal properties and swelling stability, and it also promotes cell proliferation. Regarding the specific surface area, the highest value exposes the composite stabilized by the thermal dehydration method.

Assessment of the Toxicity of Biocompatible Materials Supporting Bone Regeneration: Impact of the Type of Assay and Used Controls

Assessing the toxicity of new biomaterials dedicated to bone regeneration can be difficult. Many reports focus only on a single toxicity parameter, which may be insufficient for a detailed evaluation of the new material. Moreover, published data frequently do not include control cells exposed to the environment without composite or its extract. Here we present the results of two assays used in the toxicological assessment of materials’ extracts (the integrity of the cellular membrane and the mitochondrial activity/proliferation), and the influence of different types of controls used on the obtained results. Results obtained in the cellular membrane integrity assay showed a lack of toxic effects of all tested extracts, and no statistical differences between them were present. Control cells, cells incubated with chitosan extract or chitosan-bioglass extract were used as a reference in proliferation calculations to highlight the impact of controls used on the result of the experiment. The use of different baseline controls caused variability between obtained proliferation results, and influenced the outcome of statistical analysis. Our findings confirm the thesis that the type of control used in an experiment can change the final results, and it may affect the toxicological assessment of biomaterial.

Ceramic Biomaterial Pores Stereology Analysis by the Use of Microtomography

The main aim of this study was to analyze microtomographic data to determine the geometric dimensions of a ceramic porous material’s internal structure. Samples of a porous corundum biomaterial were the research material. The samples were prepared by chemical foaming and were measured using an X-ray scanner. In the next stage, 3D images of the samples were generated and analyzed using Thermo Scientific Avizo software. The analysis enabled the isolation of individual pores. Then, the parameters characterizing the pore geometry and the porosity of the samples were calculated. The last part of the research consisted of verifying the developed method by comparing the obtained results with the parameters obtained from the microscopic examinations of the biomaterial. The comparison of the results confirmed the correctness of the developed method. The developed methodology can be used to analyze biomaterial samples to assess the geometric dimensions of biomaterial pores.

Synthetic Calcite as a Scaffold for Osteoinductive Bone Substitutes

Although a wide variety of biomaterials have been already proposed for use in bone tissue engineering, there is still need for man-made materials, which would combine support for osteogenesis with simplicity desirable for upscaling and costs reduction. In this study we have shown that synthetic calcite may serve as a scaffold for human osteoblasts transplantation. A simple dynamic system allows uniform and effective cell distribution. Cell viability and osteogenic phenotype were confirmed by XTT assay, alkaline phosphatase activity and selected osteoblast-specific genes expression. Extracellular matrix deposited by cells improved elasticity and made the whole system similar to the flexible composite material rather than to the brittle ceramic implants. It was revealed in the compression tests and also by the improved samples handling. Subcutaneous implantation of the cell-seeded calcite scaffolds to immunodeficient mice resulted in mineralized bone formation, which was confirmed histologically and by EPR analysis. The latter we propose as a method supplementary to histological analysis, for bone regeneration investigations. It specifically confirms the presence of bone mineral with a unique sensitivity and using bulk samples, which eliminates the risk of missing the material in the preparation. Our study resulted in development of a new osteogenic tissue engineered product based on man-made calcite.

[Examination of influence of microstructure of grafts on TiO2 base on the process of bone tissue forming]

AIM OF THE STUDY

Evaluation of the influence of the introduced structure modification in porous ceramic grafts on TiO2 base on overgrowing with bone tissue, in examinations with use of scanning microscopy and X-rays was the subject of the examinations.

MATERIAL AND METHOD

New ceramic materials based on TiO2 with high values of mechanical resistance, large sintering degree and biocompatibility in in vitro conditions were prepared. Those properties cause that they are worth interest as potential osteosubstitutive materials. Two kinds of grafts were created from ceramics based on TiO2: with compact and porous structure. The introduced structure modification - macroporosity - had the purpose to give osteoconductive properties to the grafts, to evoke processes favorable for bone tissue forming. In examinations of the local reaction of bone tissue after implantation of the formed porous grafts, degree of their osteointegration, the essential issue is the evaluation of the settling of the inner spaces with supporting tissues. Samples of the tested compact and porous materials in the form of cylinders were implanted in femoral bones of rabbits for a period till 6 months. The surfaces of grafts and the degree of their settling with supporting tissues were evaluated in cross-sections of the implants with light and scanning microscopic methods and they were confirmed in X-ray tests.

RESULTS

Analysis of the obtained data showed that, the surface of solid ceramic on TiO2 base was covered mainly with increasing with a time of observation quantities of extracellular substance and lamellas of bone. The macrporous structure of porous ceramic on TiO2 base enabled settling of the inner spaces of graft with supporting tissue cells, partly in the 1st month, more intensively in the 3rd and it was not completed in the 6th month after implantation.

CONCLUSIONS

Porous grafts in the form of ceramic foam on TiO2 base showed osteoconductive properties, though process of colonization after 6th month observation was not completed and the condition of the cells inside of the implant was reduced.