Abatement of chlorobenzenes in aqueous phase by persulfate activated by alkali enhanced by surfactant addition

Sites polluted by dense non-aqueous phases (DNAPLs) constitute an environmental concern. In situ chemical oxidation (ISCO) application is limited since oxidation often occurs in the aqueous phase and contaminants are usually hydrophobic. In this work, ISCO enhanced by the surfactant addition (S-ISCO) was studied for a complex liquid mixture of chlorinated organic compounds (COCs) using persulfate (PS) activated by alkali (PSA) as oxidant and Emulse-3® as a commercial non-ionic surfactant. The reaction between E3 and PSA was investigated in the absence and presence of solubilized COCs in the following concentration ranges: COCs 1.2-50 mM, PS 84-336 mM, NaOH:PS molar ratio of 2, and surfactant concentration 1-10 g·L^-1. In the experiments carried out in the absence of COCs, the unproductive consumption of PS was studied. The higher the surfactant concentration, the lower the ratio PS consumed to the initial surfactant concentration due to more complex micelle structures hindering the oxidation of surfactant molecules. This hindering effect was also noticed in the oxidation of solubilized COCs. The reduction of chlorobenzenes by PSA was negligible at surfactant concentrations above 2.5 g·L^-1, independently of the COCs concentration solubilized. Instead, a surfactant concentration of about 1 and PS concentration of 168 mM yielded a significant decrease in the time required to abate a mass of DNAPL, compared with an ISCO process, with a bearable increase in the unproductive consumption of PS.

Enhanced dechlorination of m-DCB using iron@graphite/palladium (Fe@C/Pd) nanoparticles produced by pulsed laser ablation in liquid

In this work, the zero valent Fe (ZVI) and graphite-encapsulated Fe (Fe@C) nanoparticles (NPs) were easily and selectively prepared by a pulsed laser ablation (PLA) method in an aqueous sodium borohydride solution and ascorbic acid dissolved in methanol, respectively. Here, the Fe@C NPs were uniquely synthesized by PLA in methanol, where the solvent is used as both a carbon source for the graphitic layers and solvent, which is very unique. Furthermore, Pd NPs were loaded onto the surface of the Fe@C NPs to prepare bimetallic (Fe@C/Pd) NPs for the enhancement of the degradation efficiency of m-dichlorobenzene (m-DCB). The morphology, crystallinity, and surface composition of the prepared NPs were carefully characterized by high-resolution transmission electron microscopy (HRTEM), energy dispersive x-ray spectrometer (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The degradation rate of m-DCB using single (Fe and Pd) or bimetallic (Fe/Pd and Fe@C/Pd) NPs were compared by using gas chromatography. Among these NPs produced in this work, the Fe@C/Pd NPs with 1.71 wt % of Pd showed an excellent dechlorination efficiency for m-DCB with 100% degradation within 75 min. The graphitic layer on the Fe NPs played as not only an oxidation resistant for the Fe NPs to surroundings, but also a supporter of the Pd NPs for the enhanced degradation efficiency of m-DCB.