Montmorillonite-based polymethacrylate composite monoliths as stationary phase materials for food and pharmaceutical analysis in capillary liquid and gas chromatography

This work relates to the preparation of novel and promising stationary phases containing inorganic-organic composites for capillary liquid and gas chromatography. A naturally occurring montmorillonite was introduced to polymethacrylate monoliths, then used under different conditions of GC and HPLC at the same time. The performance of the columns was evaluated for the separation of alkane and alkylbenzene series in GC and capillary HPLC, respectively. While the bare monoliths failed to separate the model analytes, montmorillonite-based polymethacrylate allowed a full separation of the mixtures with R_s≥1.42. The columns were applied for the determination of myrcene and limonene isomers in the peel extracts of some fruits using GC, and for the analysis of active ingredients including aspirin, vitamin-C, caffeine, and ibuprofen extracted from common drugs using capillary HPLC. In GC, fast separation was achieved in 1.0 min with R_s of 6.53. The columns exhibited the best efficiency for myrcene with 20,900 plates/m. Using the capillary HPLC columns, the active ingredients were resolved in 10 min with R_s≥5.72. The efficiency values located between 12,800-21,700 plates/m in all cases. The developed methods were found to be linear in the range of 0.10-10.0 and 0.20-180 μg/mL for GC and HPLC, respectively. In comparison with commercial columns, the results in GC methods reveal that, despite their much shorter length, the prepared columns proved a faster separation with higher efficiency and comparable detection limits and chromatographic resolution. The prepared HPLC capillaries exposed lower run times and detection limits with comparable efficiency and resolution, and consume fewer samples and mobile phase solvents. The results demonstrate that the montmorillonite-based polymethacrylate composites are applicable as stationary phases for routine analysis and quality control of important fields such as food and pharmaceutical samples.

Preparation of value-added metal-organic frameworks for high-performance liquid chromatography. Towards green chromatographic columns

This work applies the concepts of green chemistry, where polyethylene terephthalate (PET) bottles were used as the acid-dicarboxylic linker source for the synthesis of MIL-53(Al) metal organic frameworks (MOFs) and then used as a stationary phase for the separation of various solutes and compared with MIL-53(Al) synthesized from traditional terephthalic acid. Both synthesized MIL-53(Al) MOFs were characterized by scanning electron microscopy (SEM), FT-IR, X-ray diffraction (XRD), thermogravimetric analysis (TGA), and specific surface area analysis. Eight groups of standard analytes in addition to real samples were tested to evaluate the separation performance of the MIL-53(Al) packed columns in HPLC under various chromatographic conditions. Based on elution order of the studied compounds and the effects of mobile phase composition, the working mechanism was reversed phase mode in the presence of size-exclusion effects for large molecules, which exceeded the dynamic diameter of MIL-53(Al) (~7.6 Å). The effects of stationary phase sieving, mobile phase flow rate and composition, injected sample mass, and temperature were investigated relative to the chromatographic behavior of MIL-53(Al). MIL-53(Al) particle sieving before packing reduced peak broadening and significantly enhanced the chromatographic performance of the prepared columns up to 2.26 times relative to the number of theoretical plates. The MIL-53(Al) packed columns offered high-resolution separation for all studied mixtures with R_s >2 and good stability and long-term durability. At optimal conditions, the prepared columns exhibited efficiencies between 5600-63200 plates m^-1. Higher efficiencies were observed for alkylbenzenes and polyaromatic hydrocarbons as the organic linker in the MIL-53(Al) structure, which improved retention and separation of aromatics through π-π interactions. Thermodynamic parameters including ΔH, ΔS, and ΔG for the transfer of analyte from the mobile phase to the MIL-53(Al) stationary phase were studied. Compared with previously cited MOFs packed columns, the present MIL-53(Al) columns gave comparable selectivity and much better efficiency for most of the studied chemicals at optimum conditions, indicating the feasibility of MIL-53(Al) as a stationary phase for HPLC applications.