Aquatic plant root exudates: A source of disinfection byproduct precursors in constructed wetlands

Aquatic plant-derived dissolved organic matter (DOM) in water bodies is an important source of disinfection byproduct (DBP) precursors. It is therefore very important to investigate DBP formation, and the main DBP precursors that enter drinking water during treatment processes. In this study, Lythrum salicaria root extract (LSRE) and Acorus calamus root extract (ACRE) were analyzed. The LSRE and ACRE were chlorinated and disinfected to generate trihalomethanes, haloacetic acids, haloketones, and haloacetaldehydes. The DBP formation potential of LSRE, dominated by humus, was higher than that of Suwannee River natural organic matter (SRNOM), and trichloroacetic acid was the main DBP. It was calculated that 2.09 % of the increased DOC brought by the surface flow wetland planted with emergent aquatic plants, and the contribution rates of TCMFP, DCAAFP and TCAAFP in effluent were 3.34 %, 3.23 % and 3.05 %, respectively. A total of 706 chlorinated-formula were detected by FTICR-MS, among which mono- and di-chlorinated formulae were the most abundant. Macromolecular hydrophobic organics and tannins were the main precursors for LSRE. Unlike LSRE, the DOM composition of ACRE was dominated by protein or aliphatic compounds; therefore, the risk of DBP formation was not as high as that for LSRE. This study is the first to determine the risk of DBP formation associated with aquatic plant root extracts, and confirmed that tannins in plant-derived DOM are more important DBP precursors than lignins.

Pretreatment strategies for ion exchange to control brominated disinfection byproducts in potable reuse

The application of ion exchange (IX) resins to remove disinfection byproduct (DBP) precursors in wastewater effluents is challenging due to relatively high concentrations of competing anions. This study examined various pretreatment strategies to target competing ions to improve IX removal of DBP precursors, bromide and dissolved organic matter (DOM), measured as trihalomethane and haloacetic acid formation potentials (THMFP and HAAFP). IX batch experiments were performed with four commercial anion exchange (AIX) resins selective for bromide (BrP), DOM (A860), sulfate (MTA) and PFOA/PFOS (PFA), and one cation exchange (CIX) resin selective for iodide (CT). For single AIX treatments the bromide removal ranking was the following: PFA (58%) > MTA (51%) > BrP (43%) > A860 (16%), which corresponded with decreasing brominated THMFP removals and increasing bromine incorporation factors. For dual AIX combinations (PFA and BrP, MTA and BrP), either simultaneous or sequential treatments had the highest bromide (PFA + BrP [69%], MTA + BrP [67%], (PFA→BrP [77%], MTA→BrP [74%]) and Br-THMFP (THMFP [∼80%]) and Br-HAAFP (HAAFP [∼77%]) removals, and therefore the lowest fractions of brominated DBPs (Br-DBPs). Despite ozone (O₃), biological active carbon (BAC), and granular activated carbon (GAC) pretreatments reducing the overall DOM concentration (33%), these pretreatment steps did not improve the bromide removals of the resins, although it did increase the Br-THMFP and Br-HAAFP removals by 2-38% and 13-20%, respectively. Nanofiltration (NF) pretreatment significantly removed sulfate (97%) resulting in an increased bromide removal of 19% by the AIX resins, which led to increased removal of Br-THMFP and Br-HAAFP by 93% and 96%, respectively. Among all the IX resins the CT resin had the highest bromide removal (83%) and lowest fraction of Br-DBPs. The results reveal pretreatment with existing technologies including AIX, O₃/BAC/GAC, or NF can potentially enhance the removal of brominated DBP precursors by IX resins during potable reuse applications.

Trihalomethane precursors: Land use hot spots, persistence during transport, and management options

To meet drinking water regulations, rather than investing in costly treatment plant operations, managers can look for ways to improve source water quality; this requires understanding watershed sources and fates of constituents of concern. Trihalomethanes (THMs) are one of the major classes of regulated disinfection byproducts, formed when a specific fraction of the organic carbon pool-referred to as THM precursors-reacts with chorine and/or bromine during treatment. Understanding the source, fate, timing and duration of the organic compounds that react to form THMs will allow identification of targeted and effective management actions. In this study we evaluated THM precursor contributions from multiple land use categories and hydrologic contexts, including novel data for urban land uses that demonstrate strong potential to release water with high THM formation potential (THMFP; median 618 μg L^-1): greater than storm runoff integrated across a mixed-use (1/3 natural, 2/3 agricultural) watershed (median 460 μg L^-1), irrigation runoff from agricultural systems (357 μg L^-1), or runoff from a natural forested (median 123 μg L^-1) and shrubland/grassland (median 259 μg L^-1) watersheds. While individual storm events released high THM precursor concentrations over short periods, dry season agricultural irrigation as well as urban landscapes have the potential to release water high in THM precursors for several months. Experimental bioassays and sampling along 333 miles of the California Aqueduct confirmed bioavailability and photooxidation potential of less than 10% for THM precursors, suggesting that rivers with residence times of days to weeks may act as THM precursor conduits, shuttling THM precursors from hundreds of miles away to drinking water intakes with minimal degradation. This finding has considerable implications for water managers, who may therefore consider THM precursor management strategies that target even sources located far upstream.

Wetlands receiving water treated with coagulants improve water quality by removing dissolved organic carbon and disinfection byproduct precursors

Constructed wetlands are used worldwide to improve water quality while also providing critical wetland habitat. However, wetlands have the potential to negatively impact drinking water quality by exporting dissolved organic carbon (DOC) that upon disinfection can form disinfection byproducts (DBPs) like trihalomethanes (THMs) and haloacetic acids (HAAs). We used a replicated field-scale study located on organic rich soils in California's Sacramento-San Joaquin Delta to test whether constructed flow-through wetlands which receive water high in DOC that is treated with either iron- or aluminum-based coagulants can improve water quality with respect to DBP formation. Coagulation alone removed DOC (66-77%) and THM (67-70%) precursors, and was even more effective at removing HAA precursors (77-90%). Passage of water through the wetlands increased DOC concentrations (1.5-7.5mgL^-1), particularly during the warmer summer months, thereby reversing some of the benefits from coagulant addition. Despite this addition, water exiting the wetlands treated with coagulants had lower DOC and DBP precursor concentrations relative to untreated source water. Benefits of the coagulation-wetland systems were greatest during the winter months (approx. 50-70% reduction in DOC and DBP precursor concentrations) when inflow water DOC concentrations were higher and wetland DOC production was lower. Optical properties suggest DOC in this system is predominantly comprised of high molecular weight, aromatic compounds, likely derived from degraded peat soils.

Impacts of ferrate oxidation on natural organic matter and disinfection byproduct precursors

This study investigated the effectiveness of ferrate (Fe(VI)) oxidation in combination with ferric chloride coagulation on the removal of natural organic matter (NOM) and disinfection byproduct (DBP) precursors. Twelve natural waters were collected and four treatment scenarios were tested at bench-scale. Results showed that intermediate-ferrate treatment (i.e., coagulation and particle removal followed by ferrate oxidation) was most effective followed by pre-ferrate treatment (i.e., ferrate oxidation followed by coagulation and particle removal (conventional treatment)) or conventional treatment alone (i.e., no oxidation), and the least effective was ferrate oxidation alone (i.e., no coagulation). At typical doses, direct ferrate oxidation of raw water decreased DBP formation potentials (DBPFPs) by about 30% for trihalomethanes (THMs), 40% for trihaloacetic acids (THAAs), 10% for dihaloacetic acids (DHAAs), 30% for dihaloacetonitriles (DHANs), and 5% for haloketones (HKs). The formation potential of chloropicrin (CP) consistently increased after direct ferrate oxidation. Pre-ferrate followed by conventional treatment was similar to conventional treatment alone for NOM and DBP precursor removal. Ferrate pre-oxidation had positive effects on subsequent coagulation/particle removal for THM and THAA precursor removal and may allow the use of lower coagulant doses due to the Fe(III) introduced by ferrate decomposition. On the other hand, intermediate-ferrate resulted in substantially improved removal of NOM and DBP precursors, which can be attributed to initial removal by coagulation and particle removal, leaving precursors that are particularly susceptible to oxidation by ferrate. The Fe(III) resulting from ferrate decay during intermediate-ferrate process was primarily present as particulate iron and could be effectively removed by filtration.