Effects of storage and toothbrush simulation on Martens hardness of CAD/CAM, hand-cast, thermoforming, and 3D-printed splint materials

OBJECTIVES

To investigate Martens hardness parameters of splint materials after storage in liquids and toothbrush simulation.

MATERIALS AND METHODS

Ten specimens per material and group were fabricated (hand-cast CAST, thermoformed TF, CAD/CAM-milled CAM, 3D-printed PS, PL, PK, PV), stored in air, water, coffee, red wine, and cleaning tablets and investigated after fabrication, 24 h, 2- and 4-week storage or toothbrushing. Martens hardness (HM), indentation hardness (HIT), indentation modulus (EIT), the elastic part of indentation work (ηIT), and indentation creep (CIT) were calculated (ISO 14577-1).

STATISTICS

ANOVA, Bonferroni post hoc test, between-subjects effects, Pearson correlation (α = 0.05).

RESULTS

HM varied between 30.8 N/mm2 for PS (water 4 weeks) and 164.0 N/mm2 for CAM (toothbrush). HIT values between 34.9 N/mm2 for PS (water 4 weeks) and 238.9 N/mm2 for CAM (toothbrush) were found. EIT varied between 4.3 kN/mm2 for CAM (toothbrush) and 1.8 kN/mm2 for PK (water 2 weeks). ηIT was found to vary between 16.9% for PS (water 4 weeks) and 42.8% for PL (toothbrush). CIT varied between 2.5% for PL (toothbrush) and 11.4% for PS (water 4 weeks). The highest impact was identified for the material (p ≤ 0.001).

CONCLUSIONS

Storage and toothbrushing influenced Martens parameters. The properties of splints can be influenced by the choice of materials, based on different elastic and viscoelastic parameters. High HM and EIT and low CIT might be beneficial for splint applications.

CLINICAL RELEVANCE

Martens parameters HM, EIT, and CIT might help to evaluate clinically relevant splint properties such as hardness, elasticity, and creep.

Origin of ultralow Young׳s modulus in a metastable β-type Ti-33Nb-4Sn alloy

Although there is difficulty in growing a Ti-33Nb-4Sn single crystal due to its ultralow β-phase stability, the single-crystal elastic constants of metastable β-type Ti-33Nb-4Sn (wt%) alloy were extracted successfully from its polycrystal by in-situ synchrotron X-ray diffraction technique, to clarify the origin of the ultralow Young's modulus in its polycrystal. It is indicated that compared to binary TiCr, TiV and TiNb alloys, the Ti-33Nb-4Sn alloy possesses slightly lower β-phase stability with respect to {110}<110>(-)shear (i.e., C׳) but much lower β-phase stability regarding to {001}〈100〉 shear (i.e., C44). An analysis by the Hill approximation suggests that the ultralow isotropic polycrystalline Young׳s modulus (EH) of Ti-33Nb-4Sn alloy originates from the extremely low shear modulus C44 as well as the relatively low C׳. This indicates that in addition to C׳, C44 has a significant contribution to the Young's modulus of polycrystal, which challenges a conventional understanding that the Young's modulus of β-type Ti alloys is predominantly determined by C׳.