Design of a Metal-Oxide Solid Solution for Sub-ppm H2 Detection

Hydrogen is largely adopted in industrial processes and is one of the leading options for storing renewable energy. Due to its high explosivity, detection of H₂ has become essential for safety in industries, storage, and transportation. This work aims to design a sensing film for high-sensitivity H₂ detection. Chemoresistive gas sensors have extensively been studied for H₂ monitoring due to their good sensitivity and low cost. However, further research and development are still needed for a reliable H₂ detection at sub-ppm concentrations. Metal-oxide solid solutions represent a valuable approach for tuning the sensing properties by modifying their composition, morphology, and structure. The work started from a solid solution of Sn and Ti oxides, which is known to exhibit high sensitivity toward H₂. Such a solid solution was empowered by the addition of Nb, which─according to earlier studies on titania films─was expected to inhibit grain growth at high temperatures, to reduce the film resistance and to impact the sensor selectivity and sensitivity. Powders were synthesized through the sol-gel technique by keeping the Sn-Ti ratio constant at the optimal value for H₂ detection with different Nb concentrations (1.5-5 atom %). Such solid solutions were thermally treated at 650 and 850 °C. The sensor based on the solid solution calcined at 650 °C and with the lowest content of Nb exhibited an extremely high sensitivity toward H₂, paving the way for H₂ ppb detection. For comparison, the response to 50 ppm of H₂ was increased 6 times vs SnO₂ and twice that of (Sn,Ti)_xO₂.

Triboelectric Hydrogen Gas Sensor with Pd Functionalized Surface

Palladium (Pd)-based hydrogen (H₂) gas sensors have been widely investigated thanks to its fast reaction and high sensitivity to hydrogen. Various sensing mechanisms have been adopted for H₂ gas sensors; however, all the sensors must be powered through an external battery. We report here an H₂ gas sensor that can detect H₂ by measuring the output voltages generated during contact electrification between two friction surfaces. When the H₂ sensor, composed of Pd-coated ITO (indium tin oxide) and PET (polyethylene Terephthalate) film, is exposed to H₂, its output voltage is varied in proportion to H₂ concentration because the work function (WF) of Pd-coated surface changes, altering triboelectric charging behavior. Specifically, the output voltage of the sensor is gradually increased as exposing H₂ concentration increases. Reproducible and sensitive sensor response was observed up 1% H₂ exposure. The approach introduced here can easily be adopted to development of triboelectric gas sensors detecting other gas species.