Chemical sensing platform for the Zn+2 ions based on poly(o-anisidine-co-methyl anthranilate) copolymer composites and their environmental remediation in real samples

A novel nanostructure of poly(o-anisidine-co-methyl anthranilate) (poly(Ani-Co-MA) copolymer has been synthesized by chemical oxidative in situ polymerization technique with equal molar proportion of monomers in the presence of sodium dodecylbenzene sulfonic acid (SDBS) surfactant. The synthesized copolymers were characterized by scanning electron microscope (SEM) and X-ray crystallography (XRD), Fourier transform infrared (FTIR), UV-Vis, thermo-gravimetric analysis (TGA), and simultaneous X-ray photoelectron spectroscopy (XPS) study. The ultraviolet visible spectrum shows the π to π∗ transition and n to π∗ transition. XRD diffraction pattern confirms the amorphous nature of poly(Ani-Co-MA)-SDBS composites. The scanning electron microscope image shows the morphology of the copolymer matrix. For the selective detection of Zn⁺² cation in neutral phosphate buffer, it was fabricated Zn⁺² cation sensor based on glassy carbon electrode (GCE) coated with poly(Ani-co-MA)-SDBS composites as a thin layer with conducting coating binders. The proposed cation sensor has been found to exhibit the inertness in air and chemical environment, long-term stability with good sensitivity, a broad linear dynamic range practically, a reliable reproducibility, short response time, and high electrochemical activity. The sensitivity (0.3560 μA μM^-1 cm^-2) of Zn⁺² cation sensor has been calculated from the slope of the calibration curve. The linearity of the calibration curve is found over the linear dynamic range (LDR) 0.1 nM~0.01 M, and detection limit (DL) is 27.0 ± 1.35 pM at the signal to noise ratio of 3. This novel effort may be considered quite reliable and effective to detect Zn⁺² cation in environmental and biomedical sectors on a broad scale. Simultaneously, SDBS doped poly(o-anisidine-co-methyl anthranilate) copolymer composites were measured against medically important organisms Escherichia coli. E. ludwigi, and Bacillus subtilis. Graphical abstract ᅟ.

Cd-doped Sb2O4 nanostructures modified glassy carbon electrode for efficient detection of melamine by electrochemical approach

Cadmium doped antimony oxide (Cd-doped Sb₂O₄) nanostructures (CAO-NSs) were synthesized by a facile hydrothermal method in alkaline phase at low temperature to detect the melamine from aqueous solution. The calcined CAO-NSs were characterized systematically by FE-SEM, EDS, UV/Vis., FTIR spectroscopy, powder XRD, and XPS techniques. The glassy carbon electrode (GCE) was modified with the CAO-NSs and sensing performance towards the selective melamine was explored by the electrochemical approach in phosphate buffer solution. The melamine undergoes a reduction reaction in the presence of CAO-NSs/GCE in PBS. The CAO-NSs/GCE attained the higher sensitivity (3.153μAμM^-1cm^-2) for a wide ranges of concentration (LDR: 0.05nM-0.5mM), an ultra-low limit of detection (LOD: 14.0 ± 0.05p.M.; S/N = 3), long-term stability, excellent repeatability, and reproducibility. This method might represent an efficient way of sensitive sensor development for the toxic melamine and their derivatives for the safety of biomedical and health care fields in broad scales.

Thiourea sensor development based on hydrothermally prepared CMO nanoparticles for environmental safety

Low-dimensional cobalt oxide codoped manganese oxide nanoparticles (CMO NPs; dia. ~ 25.6nm) were synthesized using the hydrothermal method in alkaline phase. The optical, morphological, and structural properties of CMO NPs were characterized in details using FT-IR, UV/vis., FESEM, XEDS, XPS, TEM, and XRD techniques. Glassy carbon electrode (GCE) was fabricated with a thin-layer of CMO NPs by conducting coating binders for the development of selective and sensitive thiourea (TU) sensors. Electrochemical responses along with higher sensitivity, large-dynamic-range, and long-term stability towards TU were performed by electrochemical I-V approach. The calibration curve was found linear over a wide linear dynamic range (LDR) of TU concentration. From the gradient of the calibration plot, limit of detection (LOD), and sensitivity were calculated as 12.0±0.05pM and 3.3772nAnM^-1cm^-2 respectively. It is an organized route for the development of chemical sensor based on very low-dimensional CMO NPs/GCE using electrochemical reduction phenomena. As far as we know, this report is the maiden publication on highly sensitive TU sensor based on the CMO NPs/GCE. This method could be a pioneer developer in TU sensitive chemical sensor development using doped NPs in the simple I-V method for the important sensor applications with useful doped materials coupled nano-technological systems for environmental safety.