Chitosan-assisted self-assembly of flower-shaped ε-Fe2O3 nanoparticles on screen-printed carbon electrode for Impedimetric detection of Cd2+, Pb2+, and Hg2+ heavy metal ions in various water samples

This study focuses on the fabrication of a novel sensing platform on a screen-printed carbon electrode, modified by a combination of hydrothermally synthesized iron dioxide (ε-Fe2O3) nanoparticles and Chitosan (CS) biopolymer. This unique organic-inorganic hybrid material was developed for Electrochemical Impedance Spectroscopy (EIS) sensing, specifically targeting heavy metal ions that include Hg2+, Cd2+, as well as Pb2+. The investigation encompassed a comprehensive analysis of various aspects of the prepared Fe2O3 and CS/ε-Fe2O3 nanocomposites, including phase identification, determination of crystallite size, assessment of surface morphology, etc. CS/ε-Fe2O3 was drop-casted and deposited on the Screen-Printed Electrode (SPE). The resulting sensor exhibited excellent performance in the precise and selective quantification of Hg2+, Cd2+, and Pb2+ ions, with minimal interference from other substances. The fabricated sensor exhibits excellent performance as the detection range for Hg2+, Cd2+, and Pb2+ ions linearity is 2-20 μM, sensitivity, and LOD are 243 Ω/ μM cm2 and 0.191 μM, 191 Ω/μM cm2, and 0.167 μM, 879 Ω/ μM cm2, and 0.177 μM respectively. The stability of the CS/ε-Fe2O3/SPE electrode is demonstrated by checking its conductivity for up to 60 days for Hg2+, Cd2+, and Pb2+ ions. The reusability of the fabricated electrode is 14 scans, 13 scans, and 12 scans for Hg2+, Cd2+, and Pb2+ ions respectively. The findings indicate the successful development of an innovative CS/ε-Fe2O3 electrode for the EIS sensing platform. This platform demonstrates notable potential for addressing the critical need for efficient and sensitive EIS sensors capable of detecting a range of hazardous heavy metal ions, including Hg2+, Cd2+, and Pb2+.

Modified Impedance Sensing System Determination of Virulence Characteristics of Pathogenic Bacteria Klebsiella Species

An impedance sensing system is a family of biosensors that measure changes in electrical impedance to perform their functions. Physical and chemical changes in the impedance of the sensing element, such as changes in the concentration of a target analyte or changes in the physical properties of the sensing element, can result in changes in the impedance of the sensing element. Many impedance biosensors have been developed for the detection of pathogens in the past few decades. Several types of biosensors have been developed for the detection of infections, including transduction elements, biorecognition components, and electrochemical approaches. In this review, we discuss the characteristics and pathogenic factors associated with 2,3-butanediol-producing Klebsiella pneumoniae collected using impedance sensors. An impedance sensing system was introduced as a great method for monitoring the virulence factors of Klebsiella spp. in situ. Klebsiella pneumoniae produces virulence factors, including capsules, lipopolysaccharides, fimbriae, and siderophores, as part of its pathogenesis. It is possible to examine virulence factors' pathogenic characteristics in vitro and in vivo using real tissues or mouse models in order to conduct experiments. For the monitoring of virulence factors in situ, a novel alternative method has been developed to mimic the environment of real tissues. For the purpose of developing tissue-mimicking models, mucin and mannose were used to modify the surface of gold electrodes. These components are known to contribute to the adhesion of pathogens to epithelial cells in mammals.

Point-of-care human milk testing for maternal secretor status

We present an electrochemical impedimetric-based biosensor for monitoring the variation in human milk oligosaccharide (HMO) composition. 2′-Fucosyllactose (2’FL) is an HMO associated with infant growth, cognitive development, and protection from infectious diarrhea, one of the major causes of infant death worldwide. Due to genetic variation, the milk of some women (non-secretors) contains no or very little 2′FL with potential implications for infant health and development. However, there is currently no technology to analyze the presence and concentration of HMOs in human milk at the point-of-care (POC). The lack of such technology represents a major impediment to advancing human milk research and improving maternal-infant health. Towards this unmet need, we report an impedimetric assay for HMOs with an α-1,2 linkage, the most abundant of which is 2′FL. The sensor uses a lectin for affinity, specifically Ulex europaeusagglutininI (UEA), with electrochemical readout. In spiked studies, the sensor exhibited a high degree of linearity (R² = 0.991) over 0.5 to 3.0 μM with a 330-nM detection limit. The sensor performance was clinically validated using banked human milk samples and correctly identified all secretor vs. non-secretor samples. Furthermore, despite the short 35-min assay time and low sample volume (25 μL), the assay was highly correlated with HPLC measurements. This bedside human milk testing assay enables POC, “sample-to-answer” quantitative HMO measurement, and will be a valuable tool to assess milk composition.

Disposable impedance-based immunosensor array with direct-laser writing platform

Immunoassay is a powerful technique to identify and quantify biological molecules, which base on the specificity and selectivity of antigen-antibody interaction. Impedance-based immunosensor has recently shown a great potential to provide rapid and label-free detections. However, the conventional impedance-based immunosensors rely on dedicated electrochemical measurement interface which involves expensive fabrication procedures such as gold deposition and photolithography. In this work, we propose an ultra-low-cost and high processing efficiency platform for impedance-based immunosensing. With effortless operations of direct-laser-writing, an impedance-based immunoassay can be fabricated within 5 min in standard laboratories. The as-fabricated devices have shown great stability and a high device-to-device uniformity. In order to further validate impedance sensing system's performance, finite element analysis and impedance equivalent model analysis were performed. The measured data was consistent with the simulation results. With the standard gold electrodes surface bio-functionalization procedures, the disposable immunoassay can detect anti-IgG down to 10 ng/ml.

Tracing the pH dependent activation of autophagy in cancer cells by silicon nanowire-based impedance biosensor

Monitoring the pH dependent behavior of normal and cancer cells by impedimetric biosensor based on Silicon Nanowires (SiNWs) was introduced to diagnose the invasive cancer cells. Autophagy as a biologically activated process in invasive cancer cells during acidosis, protect them from apoptosis in lower pH which presented in our work. As the autophagy is the only activated pathways which can maintain cellular proliferation in acidic media, responses of SiNW-ECIS in acidified cells could be correlated to the probability of autophagy activation in normal or cancer cells. In contrast, cell survival pathway wasn't activated in low-grade cancer cells which resulted in their acidosis. The measured electrical resistance of MCF10, MCF7, and MDA-MB468 cell lines, by SiNW sensor, in normal and acidic media were matched by the biological analyses of their vital functions. Invasive cancer cells exhibited increased electrical resistance in pH 6.5 meanwhile the two other types of the breast cells exhibited sharp (MCF10) and moderate (MCF7) decrease in their resistance. This procedure would be a new trend in microenvironment based cancer investigation.