How does the robot adoption promote carbon reduction?: spatial correlation and heterogeneity analysis

Along with the continuous improvement of industrial intelligence, robots are widely used in various aspects of production and life, playing an essential role in achieving carbon reduction targets. However, the existing research on the carbon reduction effect of robots and its mechanism is limited. Therefore, this study aims to explore the impact of robot adoption on carbon emissions and analyzes the mechanism by taking 30 provinces in China from 2006 to 2019 as research objects. It found that robot adoption can significantly reduce carbon emissions. However, the degree of marketization plays a masking effect, which limits robots' carbon reduction effect to some extent. Furthermore, the carbon reduction effect of robot adoption is stronger in provinces with lower carbon emissions. Finally, robot adoption has a significant spatial spillover effect on neighboring regions. The improvement of robot adoption will positively affect the region's and surrounding areas' carbon emission reduction. The relevant findings provide empirical support for further deepening the policy implementation of robot-assisted carbon emission reduction.

Noise-induced masking of hearing in a labyrinth fish: effects on sound detection in croaking gouramis

An increasing level of anthropogenic underwater noise (shipping, drilling, sonar use, etc.) impairs acoustic orientation and communication in fish by hindering signal transmission or detection. Different noise regimes can reduce the ability to detect sounds of conspecifics due to an upward shift of the hearing threshold, a phenomenon termed masking. We therefore investigated the masking effect of white noise on the auditory thresholds in female croaking gouramis (Trichopsis vittata, Osphronemidae). We hypothesized that noise would influence the detection of conspecific vocalizations and thus acoustic communication. The auditory evoked potentials (AEP) thresholds were measured at six different frequencies between 0.1 and 4 kHz using the AEP recording technique. Sound pressure level audiograms were determined under quiet laboratory conditions (no noise) and continuous white noise of 110 dB RMS. Thresholds increased in the presence of white noise at all tested frequencies by 12-18 dB, in particular at 1.5 kHz. Moreover, hearing curves were compared to spectra of conspecific sounds to assess sound detection in the presence of noise in various contexts. We showed that masking hinders the detection of conspecific sounds, which have main energies between 1.0 and 1.5 kHz. We predict that this will particularly affect hearing of female's low-intensity purring sounds during mating. Accordingly, noise will negatively affect acoustic communication and most likely reproductive success.

Color and masking properties of translucent monolithic zirconia before and after glazing

Purpose 1. to assess the ability of four brands of translucent monolithic zirconia with different thicknesses to mask discolored substrates; 2. to assess the influence of glazing upon their color coordinates and masking properties.Methods Sixty samples of shade A1 (0.8, 1.5, and 2.0 mm thickness) from: ZirCAD/MT, Katana/HT, Vita YZ/HT, Cercon/HT were fabricated and glazed using a standardized laboratory procedure. CIE L*a*b* parameters were recorded on composite substrates, (IPS Natural Die Material Kit) (ND1=reference; ND2, ND3, ND4, ND5=test backgrounds), before and after glazing. The color changes of zirconia samples induced by glazing were analyzed. Masking properties was calculated as the color difference between CIE L*a*b* parameters of the samples placed on reference and test substrates with CIEDE2000(1:1:1) formula. The effect of material, thickness, substrate, and glazing on the color of monolithic zirconia was analyzed with ANOVA test and the multiple comparisons were analyzed with Tukey HSD tests (α=0.05).Results After glazing, lightness L* significantly increased, while chromatic coordinates a* and b* decreased (p<0.05). Significant differences in the masking properties of the four materials (p<0.001) were found, with IPS e.max ZirCAD/MT having the lowest masking effect (p<0.001). Thickness, substrate and glazing had a significant effect on the color masking properties of monolithic zirconia (p<0.001).Conclusions Masking properties of translucent zirconia were significantly influenced by the materials, the thickness and the color of the substrate; moreover, glazing improved the masking ability for all zirconia samples.

Laboratory evaluation of the potential masking of color changes produced by silver diamine fluoride in primary molars

BACKGROUND

The importance of Silver diamine fluoride (SDF) as a minimally invasive and nonaerosolizing management during COVID-19 pandemic has highly increased. SDF is a caries-arresting agent that causes staining of tooth structure. Managing this discoloration will increase its acceptance in treating primary teeth. The main aim of this study was to quantify the color change associated with the application of SDF on extracted carious primary molars, the potential masking of this color change by potassium iodide (KI), composite (CMP) and glass ionomer cement (GI) and the effect of aging on this color masking effect.

METHODS

An in-vitro study in which 52 carious primary molars were collected, prepared, and distributed randomly into four groups equally as follows: Group A: SDF 38%; Group B: SDF 38% + KI; Group C: SDF 38% + CMP; Group D: SDF 38% + GI. Color changes were recorded for each sample at baseline, and after application of the tested materials. Moreover, all samples had undergone Suntest aging followed by a third color reading. CIELAB values L*, a*, b*, ΔL, Δa, and Δb were measured, ΔE was calculated, and data were analyzed using multivariate analysis of variance (MANOVA) and post-Hoc Scheffé test (p < 0.05).

RESULTS

MANOVA revealed the significant influence of the factor 'material'. SDF caused an obvious color change compared to the color of carious dentin. Regarding ΔL, the color change of groups C and D was not significant directly after application of the tested materials. After aging, it was significant among all groups, including groups C and D. In Δa there was a difference between SDF and groups B and C after application of the tested materials, and aging produced the same results. The color shifts of Δb of all tested groups varied significantly from one another. After aging, there was no difference between group D and either group A or B.

CONCLUSIONS

Treatment with SDF caused obvious discoloration of carious dentin. Directly after SDF application, all tested materials could effectively mask the color change associated with the application of SDF. CMP was the only material whose color masking effect was not completely reversed by aging.

"Are changes in breast density during the menstrual cycle relevant? To what?"

PURPOSE

Cancers can be hidden by high breast density (BDen)- the masking effect (ME). BDen is also a modifiable and highly prevalent breast cancer risk (BCR) factor. The purposes of this study were to determine how much glandular volume (GVol), breast volume (BVol) and their ratio: BDen change during the menstrual cycle, and if these changes could affect ME or be relevant to results of interventional studies aiming to diminish BCR using these parameters as surrogates.

METHODS

We retrieved GVol, BVol and BDen data values obtained from 39,997 right mammograms performed with photon counting technique of 19,904 premenopausal women who reported their first day of last menses (FDLM). Many women had more than one study included over the years (with a different FDLM) but were not studied longitudinally. We segregated women by age (yearly), divided the menstrual cycle in 4 weeks, and assigned results with respect to the FDLM.

RESULTS

All parameters vary cyclically, with higher values in week 4 (GVol and BDen) or week 1 (BVol). Mean inter-week differences were very small for the three parameters, and diminished with age. However, especially in the youngest women, inter-week differences could be more than 10% for BDen, 15% for GVol, and 50% for BVol.

CONCLUSION

Small inter-week mean differences almost certainly rule out relevant changes to ME directly attributable to BDen. However, the possibility of large differences during the menstrual cycle in younger women, who are the ideal targets of interventional studies to diminish BCR, might distort results and should be accounted for.

Impact of atrazine concentration on bioavailability and apparent isotope fractionation in Gram-negative Rhizobium sp. CX-Z

Compound-specific stable isotope analysis of micropollutants has become an established method for the qualitative and quantitative assessment of biodegradation in the field. However, many of environmental factors may have an influence on the observed isotope fractionation. Herein, we investigate the impact of substrate concentration on the observed enrichment factor derived from Rayleigh plot of batch laboratory experiments conducted to measure the atrazine carbon isotope fractionation of Rhizobium sp. CX-Z subjected to the different initial concentration level of atrazine. The Rayleigh plot (changes in bulk concentration vs. isotopic composition) derived from batch experiments shown divergence from the linear relation towards the end of degradation, confirming bioavailability of atrazine changed along with the decay of substrate concentration, consequently, influenced the isotope fractionation and lowered the observed enrichment factor. When microbial degradation is coupled to a mass transfer step limiting the bioavailability of substrate, the observed enrichment factor displays a dependence on initial atrazine concentration. Observed enrichment factors (ε) (absolute value) derived from the low concentration (i.e. 9.5 μM) are below 3.5‰ to the value of -5.4‰ determined at high bioavailability (membrane-free cells). The observed enrichment factor depended significantly on the atrazine concentration, indicating the concentration level and the bioavailability of a substrate in realistic environments should be considered during the assessment of microbial degradation or in situ bioremediation based on compound-specific stable isotope analysis (CSIA) method.

Predicting interval and screen-detected breast cancers from mammographic density defined by different brightness thresholds

BACKGROUND

Case-control studies show that mammographic density is a better risk factor when defined at higher than conventional pixel-brightness thresholds. We asked if this applied to interval and/or screen-detected cancers.

METHOD

We conducted a nested case-control study within the prospective Melbourne Collaborative Cohort Study including 168 women with interval and 422 with screen-detected breast cancers, and 498 and 1197 matched controls, respectively. We measured absolute and percent mammographic density using the Cumulus software at the conventional threshold (Cumulus) and two increasingly higher thresholds (Altocumulus and Cirrocumulus, respectively). Measures were transformed and adjusted for age and body mass index (BMI). Using conditional logistic regression and adjusting for BMI by age at mammogram, we estimated risk discrimination by the odds ratio per adjusted standard deviation (OPERA), calculated the area under the receiver operating characteristic curve (AUC) and compared nested models using the likelihood ratio criterion and models with the same number of parameters using the difference in Bayesian information criterion (ΔBIC).

RESULTS

For interval cancer, there was very strong evidence that the association was best predicted by Cumulus as a percentage (OPERA = 2.33 (95% confidence interval (CI) 1.85-2.92); all ΔBIC > 14), and the association with BMI was independent of age at mammogram. After adjusting for percent Cumulus, no other measure was associated with risk (all P > 0.1). For screen-detected cancer, however, the associations were strongest for the absolute and percent Cirrocumulus measures (all ΔBIC > 6), and after adjusting for Cirrocumulus, no other measure was associated with risk (all P > 0.07).

CONCLUSION

The amount of brighter areas is the best mammogram-based measure of screen-detected breast cancer risk, while the percentage of the breast covered by white or bright areas is the best mammogram-based measure of interval breast cancer risk, irrespective of BMI. Therefore, there are different features of mammographic images that give clinically important information about different outcomes.

Masking Effect of Radiopharmaceutical Dose Extravasation During Injection on Myocardial Perfusion Defects During SPECT Myocardial Perfusion Imaging: A Potential Source of False Negative Result

Proper interpretation of SPECT myocardial perfusion imaging (MPI) is primarily based on strict adherence to standard procedural protocols from patient preparation to image processing and display. Inadvertent faulty injection of the radiopharmaceutical and, consequently, dose extravasation during SPECT MPI is a more important issue than that in any other diagnostic scintigraphic procedure. As it can be considered as a major source of false negative result, clinician’s awareness of this problem during interpretation is of great importance. In some occasions, no local clinical signs or image findings may be available to the interpreter to be aware of dose extravasation to adopt a suitable approach. Herein, we present a case with dose extravasation during stress phase, which is repeated another day with the same protocol, and the potential effects of dose extravasation on SPECT myocardial perfusion images from different aspects and useful image findings as hints are provided.

Delta-9-tetrahydrocannabinol (THC) history fails to affect THC's ability to induce place preferences in rats

RATIONALE

In pre-clinical models of marijuana abuse, there is relatively limited evidence of delta-9-tetrahydrocannabinol's (THC) rewarding effects, as indexed by its general inability to induce a place preference. One explanation for this failure is that its rewarding effects are masked by its concurrently occurring aversive properties. Consistent with this explanation, THC pre-exposure, which presumably weakens its aversive effects, induces place preferences. Such demonstrations are limited to mice and given reported species differences in THC reactivity, it is unknown to what extent the same shift in affective properties would be evident in rats.

METHODS

The present experiment examined the effect of THC history (3.2mg/kg) on THC (1 or 3.2mg/kg) induced place preference conditioning in rats. An assessment of taste avoidance was also run to independently characterize THC's aversive effects and any changes that occurred with drug pre-exposure. These assessments were made in a combined taste avoidance/place preference procedure in which a novel saccharin solution and environment were paired with THC (0, 1 or 3.2mg/kg).

RESULTS

THC did not induce place conditioning, and a history of THC was ineffective in increasing THC's ability to do so, despite the fact that this same history significantly attenuated the aversive effects of THC.

CONCLUSIONS

The failure of THC to consistently induce place preferences has been argued to be a function of its concurrently occurring aversive effects masking its rewarding properties. The fact that pre-exposure to THC significantly reduced its aversive effects without impacting THC's ability to induce place preferences suggests that THC has weak rewarding effects and/or its residual aversive affects may have still masked its rewarding properties. An important area for future work will be characterizing under what conditions THC is rewarding and whether its overall reinforcing effects are impacted by the relationship between its affective properties.