Micro solid phase extraction of lead and cadmium using functionalized nanodiamonds@CuAl2O4@HKUST-1 nanocomposite for FAAS analysis in food and water samples

This study focuses on the development and application of a novel nanocomposite (functionalized nanodiamonds@CuAl2O4@HKUST-1)-based µ-SPE method for the sensitive and selective extraction of Pb and Cd from food and water samples. The technique offers high sensitivity and selectivity, allowing accurate measurement of these metals at trace levels. The detection limit is 0.031 µg kg-1 for Cd and 0.052 µg kg-1 for Pb, with a relative standard deviation of 1.7 % for Cd and 4.8 % for Pb. The method was successfully applied to real samples and efficiently quantified Pb and Cd in food and natural water samples. The highest concentrations were found in red lentils (0.274 µg kg-1 Pb) and fresh mint (0.197 µg kg-1Cd), but still below recommended limits set by FAO/WHO (300 µg kg-1 for Pb and 200 µg kg-1 for Cd). It promises to ensure food safety, monitor environmental contamination, and informs regulatory decisions to protect public health.

A poly(o-phenylenediamine) coated aluminum garter spring micro-solid phase extractor for pyrethroids in chili

An aluminum garter spring coated with poly(o-phenylenediamine) (PoPD) was developed as a sorbent for the micro-solid phase extraction of seven pyrethroids, bifenthrin, fenpropathrin, lambda-cyhalothrin, cyfluthrin, permethrin, cypermethrin and deltamethrin from fresh chili, chili flakes, and curry pastes. The extraction was qualified and quantified by a gas chromatograph coupled with an electron capture detector. Under optimum conditions, the linearity was at a concentration range of 10-3000 µg kg-1. The limits of detection and limits of quantitation of 9.3 to 34.2 μg kg-1, and 11.8 to 48.6 μg kg-1, respectively, were obtained with good sorbent-to-sorbent reproducibility, and outstanding reusability. When applied to determine the seven pyrethroids in chili samples, some pyrethroids were detected up to 30.3 ± 1.2 μg kg-1. This proposed method is simple, with potential applications in the trace analysis of other compounds.

Simple, fast and eco-friendly micro-solid phase extraction based on thiol and ionic liquid bi-functional nanofibers membrane for the determination of sulfonamides in environmental water

BACKGROUND

Sulfonamides (SAs) are a class of synthetic antibacterial agents that are diffusely used in the medical industry and animal husbandry. Their prevalence in the influents and effluents of water treatment plants, as well as in rivers and groundwater, has provoked worldwide concern. Monitoring SAs in environmental water is of great significance for public health. However, most of the available detection techniques for SAs are cumbersome and time-consuming. With the increasing number of actual samples, simple, fast and environmentally friendly analytical methods are always in demand.

RESULTS

Herein, we describe a highly efficient micro-solid phase extraction (μ-SPE) sample preparation technique based on a novel thiol and ionic liquid bi-functional nanofibers membrane (IL-SH-PAN NFsM) for multi-residue detection of sulfonamides (SAs) in water samples. By the synergistic effect of -SH and -IL, the as-prepared IL-SH-PAN NFsM demonstrated high adsorption capacity and excellent selectivity for SAs. The water samples can be directly used for μ-SPE without pH and ionic strength adjustment, and the eluent can be directly collected for HPLC-MS/MS analysis. Compared with other methods reported in the literature, this method required much shorter extraction time (2 min for a batch), much less amount of adsorbent (4.0 mg) and organic solvent (0.5 mL), while providing much higher sensitivity (1.4-3.9 ng L-1), and fine recoveries (88.8%-117.7%) with relative standard deviations less than 4.26%.

SIGNIFICANCE AND NOVELTY

A bi-functional nanofibers membrane was prepared for efficient extraction of SAs. The adsorbent exhibited superior adsorption performance and excellent selectivity. The underlying interaction mechanisms derived from -SH and -IL were proposed, which provide a new idea for preparing versatile adsorbents. Rapid, efficient and sensitive detection of SAs in water was achieved. The novel sample preparation technique can be expected as an efficient method for routine trace SAs residue monitoring in various water samples.

Automated and semi-automated packed sorbent solid phase (micro) extraction methods for extraction of organic and inorganic pollutants

In this study, the packed sorbent solid phase (micro) extraction methods from manual to automated modes are reviewed. The automatic methods have several remarkable advantages such as high sample throughput, reproducibility, sensitivity, and extraction efficiency. These methods include solid-phase extraction, pipette tip micro-solid phase extraction, microextraction by packed sorbent, in-tip solid phase microextraction, in-tube solid phase microextraction, lab-on-a-chip, and lab-on-a-valve. The recent application of these methods for the extraction of organic and inorganic compounds are discussed. Also, the combination of novel technologies (3D printing and robotic platforms) with the (semi)automated methods are investigated as the future trend.

Nanoparticle-based polyacrylonitrile monolithic column for highly efficient micro solid-phase extraction of carotenoids and vitamins in human serum

In this work, a biocompatible monolithic column based micro-solid-phase extraction (µ-SPE) method was developed for biological fluid analysis. A novel nanoparticle-based polyacrylonitrile monolithic column (C30 NP-PMC) was fabricated by incorporating triacontyl (C30) modified silica nanoparticles (NPs) into the polyacrylonitrile monolithic matrix through thermally induced phase separation. With efficient mass transfer and sorption capacity, C30 NP-PMC exhibited outstanding performance for the extraction of carotenoids and fat-soluble vitamins (FSVs) from human serum samples, superior to commercial C18 cartridges as well as liquid-liquid extraction (LLE) method. Under optimal conditions, the proposed µ-SPE method coupled with high-performance liquid chromatography-diode array detection (HPLC-DAD) achieved satisfactory limits of detection (LODs) (1.5-75.0 ng/mL) and good recoveries (85.0-106.5 %) with relative standard deviations (RSDs) of less than 12.1% by consuming lower sorbent (35.0 mg) and organic solvent (0.8 mL). Successful application of the developed method demonstrated the great potential of such monolithic sorbents for efficient isolation and preconcentration of trace analytes from blood samples.

Determination of amphetamine in human urine samples by liquid chromatography-tandem mass spectrometry

Amphetamine selective molecularly imprinted sol-gel polymer tablets, MIP-tablets, for solid-phase microextraction of biofluid samples were prepared. An acetonitrile solution of deuterated amphetamine template and silane precursor, 3-(propylmethacrylate) trimethoxysilane, was soaked into the pores of polyethylene tablet substrates and polymerized by an acid-catalysed sol-gel process. Application of the resultant MIP-tablets to extract amphetamine from human urine samples followed by LC-MS/MS analysis was investigated. The extraction protocol was optimised with respect to pH of sample, addition of sodium chloride, extraction time, desorption solvent and desorption time. The final analysis method determined amphetamine in human urine with a limit of detection (LOD) of 1.0ng/mL and a lower limit of quantification (LLOQ) of 5ng/mL. Validation demonstrated accuracy of the method was 91.0-104.0% and inter-assay precision was 4.8-8.5% (RSD). Extraction recovery was 80%. The MIP-tablets could be re-used and the same tablet could be employed for more than twenty extractions.

Micro-solid phase extraction of perfluorinated carboxylic acids from human plasma

Micro-solid phase extraction (μ-SPE), with liquid chromatography-tandem mass spectrometry has been developed for the determination of trace levels of perfluorinated carboxylic acids (PFCAs) in human plasma. The μ-SPE sorbent was surfactant-templated mesoporous silica. Extraction time, desorption time and salt concentration were chosen as the most effective parameters and were optimized simultaneously by use of central composite design. Under the optimized extraction conditions, good linearity in the range of 100 and 5000ngL(-1) was obtained with coefficients of determination of between 0.986 and 0.995. The limits of detection (at a signal to noise ratio of 3) were measured to be in the range of between 21.23 and 65.07ngL(-1), and limits of quantification (at a signal to noise ratio of 10) were in the range of between 70.77 and 216.92ngL(-1). The relative recoveries of spiked PFCAs in different samples were in the range of between 87.58 and 102.45%. As expected from the global distribution of PFCs, contaminations at low levels (less than 200ngL(-1)) were detected (with the highest concentration recorded for perfluorooctanoic acid (PFOA)). Considering the complex nature of biological samples and the issue of matrix effects in the analysis of PFCAs, μ-SPE as an extraction method was shown to be advantageous; it combined extraction and concentration in one single step with no additional sample clean-up, and was able to remove significant matrix interferences.

Preconcentration of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II) with ethylenediamine-modified graphene oxide

We describe a novel solid phase sorbent that was synthesized by coupling graphene oxide (GO) to ethylenediamine (EDA). This nanomaterial (referred to as GO-EDA) is capable of adsorbing the ions of iron, cobalt, nickel, copper, zinc and lead. The ethylenediamine-modified graphene oxide was characterized by X-ray photoelectron spectroscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. The analytical procedure relies on (a) sorption of metal ions on GO-EDA dispersed in aqueous samples; (b) filtering, and (c) direct submission of the filter paper to energy-dispersive X-ray fluorescence spectrometry. This kind of dispersive micro-solid phase extraction was optimized with respect to pH values, concentration of GO-EDA, contact time, and the effects of interfering ions and humic acid on recovery of determined elements. Under optimized conditions, the recoveries of spiked samples range from 90 to 98 %. The detection limits are 0.07, 0.10, 0.07, 0.08, 0.06 and 0.10 ng mL-1 for Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II), respectively. The method has a relative standard deviation of <6 %, and its accuracy was verified by analysis of two standard reference materials [LGC6016 (estuarine water) and BCR-610 (groundwater)]. It was successfully applied to the determination of trace amounts of these metal ions in water samples. Graphical AbstractGraphene oxide was coupled to ethylenediamine in order to obtain an effective sorbent (GO-EDA) for preconcentration of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II) from environmental water samples.

Application of surfactant-templated ordered mesoporous material as sorbent in micro-solid phase extraction followed by liquid chromatography-triple quadrupole mass spectrometry for determination of perfluorinated carboxylic acids in aqueous media

In the present study, micro-solid phase extraction (µ-SPE) followed by liquid chromatography-triple tandem mass spectrometery (LC-MS/MS) was developed for the determination of perfluorocarboxylic acids (PFCAs) at trace levels in water samples. The µ-SPE device comprised of a porous polypropylene membrane bag containing 5mg sorbent. The membrane bag acted as a clean-up filter and prevented matrix compounds from interfering with the extraction process. Analysis was carried out by LC-MS/MS in negative electrospray ionization mode. MS/MS parameters were optimized for multiple reaction monitoring. Calcined and non-calcined MCM-41, as silica-ordered mesoporous materials, were used as sorbents in µ-SPE for the extraction of five PFCAs-perfluoropentanoic acid (PFPA), perfluoroheptanoic acid (PFHpA), perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), and perfluorodecanoic acid (PFDA)-from aqueous media. The performances of these two sorbents were compared with other sorbents such as octadecylsilane (C18) modified silica, HayeSep-A, HayeSep-B, and Porapak-R. It was found that non-calcined MCM-41 showed better extraction performance for the analytes considered. Parameters influencing extraction efficiency, such as desorption time, extraction time, desorption solvent, and salt concentration, were investigated. The effect of the matrix on MS signals (suppression or enhancement) was also evaluated. Only minor effects on ionization efficiencies were observed. The developed method proved to be convenient and offered good sensitivity and reproducibility. The limits of detection ranged from 0.02 to 0.08ng L(-1), with a relative standard deviations between 1.9 and 10.5. It was successfully applied to the extraction of PFCAs in river and rain water samples. As expected from the ubiquitous nature of PFCAs, contamination at low levels was detected for some analytes in the samples (with the highest concentration recorded for PFOA). Satisfactory relative recoveries ranging between 64% and 127% at spiking levels of 10ng L(-1) of each analyte were obtained.