Engineering of oxygen vacancy defect in CeO2 through Mn doping for toluene catalytic oxidation at low temperature

Catalytic oxidation is considered a highly effective method for the elimination of volatile organic compounds. Oxygen vacancy defect engineering in a catalyst is considered an effective approach for high-performance catalysts. Herein, a series of doped Mn_xCe_1-xO₂ catalysts (x = 0.05-0.2) with oxygen vacancy defects were synthesized by doping low-valent Mn in a CeO₂ lattice. Different characterization techniques were utilized to inspect the effect of doping on oxygen vacancy defect generation. The characterization results revealed that the Mn_0.15Ce_0.85O₂ catalyst has the maximum oxygen vacancy concentration, leading to increased active oxygen species and enhanced oxygen mobility. Thus, Mn_0.15Ce_0.85O₂ catalyst showed an excellent toluene oxidation activity with 90% toluene conversion temperature (T₉₀) of 197 °C at a weight hourly space velocity of 40,000 mL g^-1 h^-1 as compared to undoped CeO₂ (T₉₀ = 225 °C) and Ce based oxides in previous reports. In addition, the Mn_0.15Ce_0.85O₂ catalyst displayed strong recyclability, water resistant ability and long-time stability. The in situ DRIFT results showed that the Mn_0.15Ce_0.85O₂ catalyst has a robust oxidation capability as toluene is quickly adsorbed and actuated as compared to CeO₂. Thus, the present work lays the foundation for designing a highly active catalyst for toluene elimination from the environment.

Engineering controllable oxygen vacancy defects in iron hydroxide oxide immobilized on reduced graphene oxide for boosting visible light-driven photo-Fenton-like oxidation

Visible light-driven photo-Fenton-like technology is a promising advanced oxidation process for water remediation, while the construction of effective synergetic system remains a great challenge. Herein, iron hydroxide oxide (α-FeOOH) with controllable oxygen vacancy defects were engineered on reduced graphene oxide (rGO) nanosheets (named as OVs-FeOOH/rGO) through an in-situ redox method for boosting visible light-driven photo-Fenton-like oxidation. By adjusting the pH environment to modulate the redox reaction kinetics between graphene oxide (GO) and ferrous salt precursors, the oxygen vacancy concentration in α-FeOOH could be precisely controlled. With optimized oxygen vacancy defects obtained at pH 5, the OVs-FeOOH/rGO displayed superior photo-Fenton-like performance for Rhodamine B degradation (99% within 40 mins, rate constant of 0.2278 mg^-1 L min^-1) with low H₂O₂ dosage (5 mM), standing out among the reported photo-Fenton-like catalysts. The catalyst also showed excellent reusability, general applicability, and tolerance ability of realistic environmental conditions, which demonstrates great potential for practical applications. The results reveal that moderate oxygen vacancy defects can not only strengthen absorption of visible light and organic pollutants, but also promote the charge transfer to simultaneously accelerate the photogenerated electron-hole separation and Fe(III)/Fe(II) Fenton cycle, leading to the remarkable photo-Fenton-like oxidation performance. This work sheds light on the controllable synthesis and mechanism of oxygen vacancy defects to develop efficient photo-Fenton-like catalysts for wastewater treatment.

Effects of oxygen vacancy defect on microwave pyrolysis of biomass to produce high-quality syngas and bio-oil: Microwave absorption and in-situ catalytic

This paper proposed to use ferric oxide (Fe₂O₃) and ferroferric oxide (Fe₃O₄) as catalysts with both microwave absorption and catalytic properties. Carbon dioxide (CO₂) was introduced as the reaction atmosphere to further improve the quality of biofuel produced by microwave pyrolysis of food waste (FW). The results showed the bio-gas yield and the syngas concentration (H₂ + CO) increased to 70.34 wt% and 61.50 mol%, respectively, using Fe₃O₄ as the catalyst. The content of aliphatic hydrocarbons in bio-oil produced with the catalyst Fe₂O₃ increased to 67.48% and the heating value reached 30.45 MJ/kg. Compared with Fe₂O₃ catalyst, Fe₃O₄ exhibited better microwave absorption properties and catalytic properties. Transmission electron microscopy (TEM) and Electron paramagnetic resonance (EPR) characterizations confirmed that the crystal surface of Fe₃O₄ formed more oxygen vacancy defects and unpaired electrons. Additionally, according to the X-ray photoelectron spectroscopy (XPS) analysis, the content of lattice oxygen in Fe₃O₄ was 14.11%, a value that was much lower than Fe₂O₃ (38.54%). The oxygen vacancy defects not only improved the efficient utilization of microwave energy but also provided the reactive sites for the reaction between the volatile organic compounds (VOCs) and CO₂ to generate CO. This paper provides a new perspective for selecting catalysts that have both microwave absorption and catalytic properties during the microwave pyrolysis of biomass.