Impact of pesticide formulation excipients and employed analytical approach on relative matrix effects of pesticide determination in strawberries

Relative matrix effects between an ambient mass spectrometric technique known as coated blade spray (CBS) and liquid chromatographic separation approach when applied to multiresidue pesticide analysis in strawberry samples are explored. Acceptable slope relative standard deviations (RSD <15 %) were observed for the 9 compounds under study for both CBS-MS/MS (2.2-12.6 %) and LC-MS/MS (2.8-12.9 %) approaches. The findings signify both the elimination of relative matrix effects with the sample preparation and matrix match calibration with internal standard correction methods employed along with no matrix effect compromise made when using the direct-to-MS approach. Similarly, slopes of pesticides spiked from commercially available formulations (containing one or two pesticides) were found to not differ significantly from slopes generated with multiresidue pesticide standards (containing 24 additional pesticides besides the target 9 analytes) with either technique, highlighting the resistance of the employed methods to the excipients present in pesticide formulations in large amounts.

Co-formulants in plant protection products: An analytical approach to their determination by gas chromatography-high resolution mass accuracy spectrometry

In the present study, 12 volatile benzene and naphthalene derived co-formulants were identified by suspect screening and unknown analysis in 14 plant protection products (PPPs) corresponding to several types of formulations, as emulsifiable concentrates (EC), suspension concentrates (SC), dispersible concentrates (DC) and ZC, which is a mixture of a capsule suspension (CS) in an SC, containing either difenoconazole or chlorantraniliprole as main active ingredients. The selected technique was gas chromatography coupled to Q-Orbitrap high resolution mass accuracy spectrometry (GC-Q-Orbitrap-MS), providing efficient separation and detection of all identified compounds. Finally, 42 compounds were tentatively identified, and 12 of them were confirmed and quantified using analytical standards. Results showed that the applied methodology was able to detect these co-formulants at concentrations as low as 0.03 g/L (tert-butylbenzene), encompassing a wide concentration range, up to 9.63 g/L (pentamethylbenzene). Pentamethylbenzene was the only compound detected in all studied samples.

Effect of insecticide formulation and adjuvant combination on agricultural spray drift

Loss of crop protection products when agricultural spray applications drift has economic and ecological consequences. Modification of the spray solution through tank additives and product formulation is an important drift reduction strategy that could mitigate these effects, but has been studied less than most other strategies. Therefore, an experimental field study was conducted to evaluate spray drift resulting from agricultural ground applications of an insecticide formulated as a suspension concentrate (SC) and as a wettable powder (WP), with and without two adjuvants. Droplet sizes were also measured in a wind tunnel to determine if indirect methods could be substituted for field experimentation to quantify spray drift from these technologies. Results suggest that spray drift was reduced by 37% when comparing the SC to the WP formulation. As much as 63% drift reduction was achieved by incorporating certain spray adjuvants, but this depended on the formulation/adjuvant combination. The wind tunnel data for droplet spectra showed strong agreement with field deposition trends, suggesting that droplet statistics could be used to estimate drift reduction of spray solutions. These findings can be used to develop a classification scheme for formulated products and tank additives based on their potential for reducing spray drift.

Reproductive and developmental toxicity of the herbicide Betanal® Expert and corresponding active ingredients to Daphnia spp

The commercial herbicide formulation Betanal® Expert and its active ingredients (a.i.s) ethofumesate, phenmedipham and desmedipham were focused in this study. Following questions yielding from a previous study, an in-depth analysis of the reproductive toxicity of the pesticide was made. Long-term exposures of Daphnia magna and Daphnia longispina to Betanal® Expert, to each a.i. and to a customised mixture matching the a.i.s ratio within the commercial formulation were carried out, and deleterious effects in the offspring were recorded. This intended to clarify whether (1) the tested compounds induce reproductive injury; (2) there is interspecific variation in daphnids tolerance to the compounds; (3) there is an interaction between chemicals in combined treatments; and (4) the so-called inert ingredients added to the commercial formulation contribute to the toxicity of the herbicide. Generally, developmental impair was observed in both species (egg abortion and release of undeveloped embryos or dead offspring) at concentrations of any of the a.i.s below 1 mg L(-1). Ethofumesate was invariably the least toxic pesticide, and D. magna tended to be of slightly higher sensitivity to the exposures compared to D. longispina. Joint exposures indicated that the a.i.s can interact, inducing more than and less than additive effects for Betanal® Expert and the customised a.i. mixture, respectively. This indicates that inert ingredients co-formulating the commercial pesticide (which are absent from the customised a.i. mixture) actually contribute to its overall toxicity. This study constitutes an add-on to the discussion on the ecotoxicological framework required for authorisation of pesticide trade and usage. The results support the need to consider test species, long-term hazardous potential and toxicity of commercial formulations rather than solely that of active ingredients, as relevant variables in pesticide regulation.

Green near-infrared determination of copper and mancozeb in pesticide formulations

A green analytical procedure has been successfully developed for the simultaneous determination of copper and mancozeb in phytosanitary products. The method is based on different direct measurements of diffuse reflectance near-infrared (DR-NIR) spectra. Accuracy of the method has been evaluated by comparison of the obtained copper and mancozeb concentrations with those provided by reference methodologies based on titrimetric procedures. The average relative prediction error was 0.7 and 1.6 % for copper and mancozeb, respectively. The evaluation of the greenness of the DR-NIR procedure provided 100 points, which is the maximum value in the Green Certificate ranking, because of the absence of consumed reagents and waste generation and energy consumption lower than 0.1 kWh.