Halloysite nanotubes as nano-support matrix for programming the photo/H2O dual triggered reversible gel actuator

Gel actuators are a kind of soft intelligent material that can convert external stimuli into deformations to generate mechanical responses. The development of gel actuators with advanced structures to integrate multiple responsiveness, programmability, and fast deformation ability is urgently needed. Here, we explored a poly(7-(2-methacryloyloxyethoxy)-4-methylcoumarin-co-acrylic acid-co-glycol) ternary gel network as an actuator with reprogrammable photo/H2O dual responsibilities. In such a design, [2 + 2] photodimerization and photocleavage reactions of coumarin moieties can be realized under 365 and 254 nm light irradiation, respectively, affording reversible photodriven behaviour of the gels. The abundant carboxylic acid in the backbone has the capacity to form additional crosslinks to assist and accelerate the photodriven behaviour. The incorporation and orientation of halloysite nanotubes (HNTs) in gel matrices support an axial direction force and result in a more controllable and programmable actuating behaviour. The synergistic response enables fast grasping-releasing of 5-times the weight of the object in water within 10 min by fabricating HNT-incorporated gels as a four-arm gripper.

BSA-stabilized silver nanoclusters for efficient photoresponsive colorimetric detection of chromium(VI)

Hexavalent chromium is a highly toxic substance, which will pose a serious threat to human life and health and the entire ecosystem. Therefore, it is crucial to establish a simple and rapid detection method for hexavalent chromium. In this work, we fabricated bovine serum albumin-stabilized silver nanocluster (BSA-Ag₁₃ NC) which exhibited photoresponsive oxidase-like activity, catalyzing the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to the blue oxidized state TMB (oxTMB) in a short time. Interestingly, 8-hydroxyquinoline (8-HQ) can significantly inhibit the color reaction of TMB oxidation while Cr(VI) can interact specifically with 8-HQ to restore this chromogenic reaction. Based on the above facts, a colorimetric sensing system for detecting Cr(VI) was developed. The sensing system shows a wide linear range, and good selectivity, with a low detection limit of 2.32 nM. Moreover, this sensing system could be successfully applied to the detection of Cr(VI) in lake water, tap water, and sewage with satisfactory results.

Dye recovery with photoresponsive citric acid-modified BiOCOOH smart material: Simple synthesis, adsorption-desorption properties, and mechanisms

Dye recovery is of great significance for a circular economy and sustainable development. However, green recovery strategies without secondary pollution remain a significant challenge. To resolve this issue, a light-responsive smart material (citric acid-modified BiOCOOH (m-BOCH)) was synthesized and applied for dye recovery through adsorption in the dark, and desorption under visible light. With the modification of citric acid, the adsorption level of methylene blue (MB) on m-BOCH (43.4%) was more than six times that of pure BiOCOOH (7.1%). The desorption rate was ∼90% in 120 min under 420 nm light irradiation (there was no desorption for pure BOCH). Further, the adsorption rate was improved to 83.9% and the desorption rate remained stable at an optimal pH of 10.09. Characterization results indicated that carboxyl groups were modified onto the surface of BiOCOOH and served as adsorption sites for MB. Under visible light exposure, the connections between the carboxyl groups and BiOCOOH were damaged, which led to the desorption of MB from the surface of the m-BOCH. The recovered MB exhibited a good staining effect on hepatic stellate cells (HSC) as a fresh dye. The regeneration of m-BOCH was achieved through a moderate hydrothermal process, and the adsorption and desorption capacities were restored to 80.8% and 85.7%, respectively. This research provides a novel environmentally compatible strategy for dye recovery without secondary pollution. This is a very promising treatment technique for dye effluents, which highlights the application of smart materials resource recycling for environmental remediation.

ALD-induced TiO2/Ag nanofilm for rapid surface photodynamic ion sterilization

The daily life of people in the intelligent age is inseparable from electronic device, and a number of bacteria on touch screens are increasingly threatening the health of users. Herein, a photocatalytic TiO₂/Ag thin film was synthesized on a glass by atomic layer deposition and subsequent in situ reduction. Ultraviolet-visible (UV-Vis) spectra showed that this film can harvest the simulated solar light more efficiently than that of pristine TiO₂. The antibacterial tests in vitro showed that the antibacterial efficiency of the TiO₂/Ag film against S. aureus and E. coli was 98.2% and 98.6%, under visible light irradiation for 5 min. The underlying mechanism was that the in-situ reduction of Ag on the surface of TiO₂ reduced the bandgap of TiO₂ from 3.44 to 2.61 eV due to the formation of Schottky heterojunction at the interface between TiO₂ and Ag. Thus, TiO₂/Ag can generate more reactive oxygen species for bacterial inactivation on the surface of electronic screens. More importantly, the TiO₂/Ag film had great biocompatibility with/without light irradiation. The platform not only provides a more convenient choice for the traditional antibacterial mode but also has limitless possibilities for application in the field of billions of touch screens.

Photo-controlled degradation of PLGA/Ti3C2 hybrid coating on Mg-Sr alloy using near infrared light

A PLGA/Ti₃C₂ hybrid coating was successfully deposited on the surface of magnesium-strontium (Mg-Sr) alloys. Compared with the corrosion current density (i_corr) of the Mg-Sr alloy (7.13 × 10⁻⁵ A/cm²), the modified samples (Mg/PLGA/Ti₃C₂) was lower by approximately four orders of magnitude (7.65 × 10⁻⁹ A/cm²). After near infrared 808 nm laser irradiation, the i_corr of the modified samples increased to 3.48 × 10⁻⁷ A/cm². The mechanism is that the local hyperthermia induced the free volume expansion of PLGA, and the increase in intermolecular gap enhanced the penetration of electrolytes. Meanwhile, the cytotoxicity study showed that the hybrid coating endowed the Mg-Sr alloy with enhanced biocompatibility.

•

PLGA/Ti₃C₂ hybrid coating enhanced the corrosion resistance of the Mg-Sr alloy.

•

PLGA/Ti₃C₂ hybrid coating exhibited outstanding photothermal performance.

•

The degradation rate was adjusted by near infrared light.

•

Providing a promising strategy for remote controlling degradation of Mg-based alloy.

Targeted antimicrobial peptide delivery in vivo to tumor with near infrared photoactivated mesoporous silica nanoparticles

Antimicrobial peptide PA-C1b (chensinin-1b conjugated with palmitic acid) showed potent anticancer activity with no obvious hemolytic activity, which made it a potential agent for treating cancers. However, after in vivo administration, peptides can be degraded by proteases because there is no effective protection. In this study, a tumor-targeting photoresponsive antimicrobial peptide delivery system was developed, and the peptide PA-C1b labeled with the dye sulfo-cyanine7 (Cy7) was loaded into mesoporous silica nanoparticles (MSNs). The final MSN@Cy7-PA-C1b nanoparticles were wrapped by graphene oxide (GO), and then folic acid was conjugated to the surface of the MSNs for targeting purposes. The final MSN@Cy7-PA-C1b@FA-GO nanoparticles were constructed to allow light-mediated peptide release and folate receptor-targeted cancer therapy. The Cy7 dye serves as a real-time indicator, and GO acts as a gatekeeper to prevent leakage of the loaded peptides in the absence of near-infrared light irradiation. Upon light irradiation, the GO wrapping detaches, and the photoresponsive peptide delivery system works well both in in vitro cell experiments and during in vivo administration in mouse tumor experiments. The construction of the MSN@Cy7-PA-C1b@FA-GO platform provides a novel approach to deliver antimicrobial peptides in vivo for the treatment of infections by pathogenic microorganisms and cancers.

A triple-channel sensing array for protein discrimination based on multi-photoresponsive g-C3N4

Graphitic carbon nitride (g-C₃N₄) as an outstanding photoresponsive nanomaterial has been widely used in biosensing. Other than the conventional single channel sensing mode, a triple-channel sensing array was developed for high discrimination of proteins based on the photoresponsive g-C₃N₄. Besides the photoluminescence and Rayleigh light scattering features of g-C₃N₄, we exploit the new photosensitive colorimetry of g-C₃N₄ as the third channel optical input. The triple-channel optical behavior of g-C₃N₄ can be synchronously changed after interaction with the protein, resulting in the distinct response patterns related to each specific protein. Such a triple-channel sensing array is demonstrated for highly discriminative and precise identification of nine proteins (hemoglobin, trypsin, lysozyme, cytochrome c, horseradish peroxidase, transferrin, human serum albumin, pepsin, and myoglobin) at 1 μM concentration levels with 100% accuracy. It also can discriminate proteins being present at different concentration and protein mixtures with different content ratios. The practicability of this sensor array is validated by high accuracy identification of nine proteins in human urine samples. This indicates that the array has a great potential in terms of analyzing biological fluids. Graphic abstract .

Photoresponsive Hydrogels with Photoswitchable Stiffness: Emerging Platforms to Study Temporal Aspects of Mesenchymal Stem Cell Responses to Extracellular Stiffness Regulation

An extensive number of cell-matrix interaction studies have identified matrix stiffness as a potent regulator of cellular properties and behaviours. Perhaps most notably, matrix stiffness has been demonstrated to regulate mesenchymal stem cell (MSC) phenotype and lineage commitment. Given the therapeutic potential for MSCs in regenerative medicine, significant efforts have been made to understand the molecular mechanisms involved in stiffness regulation. These efforts have predominantly focused on using stiffness-defined polyacrylamide (PA) hydrogels to culture cells in 2D and have enabled elucidation of a number of mechano-sensitive signalling pathways. However, despite proving to be a valuable tool, these stiffness-defined hydrogels do not reflect the dynamic nature of living tissues, which are subject to continuous remodelling during processes such as development, ageing, disease and regeneration. Therefore, in order to study temporal aspects of stiffness regulation, researchers have developed and exploited novel hydrogel substrates with in situ tuneable stiffness. In particular, photoresponsive hydrogels with photoswitchable stiffness are emerging as exciting platforms to study MSC stiffness regulation. This chapter provides an introduction to the use of PA hydrogel substrates, the molecular mechanisms of mechanotransduction currently under investigation and the development of these emerging photoresponsive hydrogel platforms.

Supramolecular Platform with Switchable Multivalent Affinity: Photo-Reversible Capture and Release of Bacteria

Surfaces having dynamic control of interactions at the biological system-material interface are of great scientific and technological interest. In this work, a supramolecular platform with switchable multivalent affinity was developed to efficiently capture bacteria and on-demand release captured bacteria in response to irradiation with light of different wavelengths. The system consists of a photoresponsive self-assembled monolayer containing azobenzene (Azo) groups as guest and β-cyclodextrin (β-CD)-mannose (CD-M) conjugates as host with each CD-M containing seven mannose units to display localized multivalent carbohydrates. Taking the advantage of multivalent effect of CD-M, this system exhibited high capacity and specificity for the capture of mannose-specific type 1-fimbriated bacteria. Moreover, ultraviolet (UV) light irradiation caused isomerization of the Azo groups from trans-form to cis-form, resulting in the dissociation of the host-guest Azo/CD-M inclusion complexes and localized release of the captured bacteria. The capture and release process could be repeated for multiple cycles, suggesting good reproducibility. This platform provides the basis for development of reusable biosensors and diagnostic devices for the detection and measurement of bacteria and exhibits great potential for use as a standard protocol for the on-demand switching of surface functionalities.

Photo- and thermo-responsive multicompartment hydrogels for synergistic delivery of gemcitabine and doxorubicin

Hydrogels have found promising applications in drug delivery due to their biocompatibility, high drug loading capability, and tunable release profiles. However, hydrogel-based carriers are primarily employed for delivering hydrophilic payloads while hydrophobic drugs cannot be efficiently delivered due to the lack of hydrophobic domains within conventional hydrogel matrices. Herein, we report that thermo- and photo-responsive hydrogels could be constructed from amphiphilic triblock copolymers, poly(N-isopropylacrylamide)-b-poly(4-acryloylmorpholine)-b-poly(2-((((2-nitrobenzyl)oxy)carbonyl) amino)ethyl methacrylate) (PNIPAM-b-PNAM-b-PNBOC), and the resulting hydrogels could be further engineered a new carrier for both hydrophilic gemcitabine (GCT) and hydrophobic doxorubicin (DOX). PNIPAM-b-PNAM-b-PNBOC triblock copolymers were first self-assembled into micelles with hydrophobic photosensitive PNBOC cores, hydrophilic PNAM inner shells, and thermoresponsive PNIPAM coronas below the lower critical solution temperature (LCST), while hydrogels of physically cross-linked micellar nanoparticles were achieved at elevated polymer concentrations and high temperatures above the critical gelation temperature (CGT). Rheological experiments revealed that the CGT was highly dependent on polymer compositions and concentrations, that is, a longer hydrophobic PNBOC block or a higher polymer concentration led to a decreased CGT. However, the CGT prior to UV irradiation (CGT₀) could be drastically elevated after UV irradiation (CGT_UV) as a result of UV irradiation-induced concurrently cross-linking and hydrophobic-to-hydrophilic transition within PNBOC cores. As such, gel-to-sol transition could be accomplished by either temperature decrease or exposure to UV irradiation at a fixed temperature lower than the CGT_UV. Note that both GCT and DOX could be simultaneously encapsulated into the hydrogels due to the coexistence of extramicellar aqueous phase and hydrophobic micellar cores. Intriguingly, the subsequent co-release of GCT and DOX could be regulated by taking advantage of either temperature or UV irradiation-mediated gel-to-sol transitions.

Reversible regulation of thrombin adsorption and desorption based on photoresponsive-aptamer modified gold nanoparticles

In the protein separation, adsorption and desorption of target protein have been using different buffer condition. Different buffer will change the structure and activity of target protein in some cases. This work describes the use of different wavelength light for remote regulation of adsorption and desorption of target protein in the same buffer solutions. A dynamic system that captured and released protein in response to light is reported. Matrix gold nanoparticles and light-responsive affinity ligand comprising thrombin aptamer (APT15), polyethylene glycol linker, and azobenzene-modified complementary sequence were used. UV light induced a trans-cis isomerization of the azobenzene that destabilized the duplex of aptamer and azobenzene-modified complementary sequence, resulting in thrombin binding to aptamer sequence. Visible light irradiation resulted in DNA duplex rehybridization and thrombin released. Our work demonstrates that different light wavelengths effectively regulated the adsorption and desorption of thrombin in the same buffer, and this system also can capture and release prothrombin from plasma with different wavelength light. Furthermore, this method can be widely applied to a variety of different protein separation process.