Investigation of the adsorption behavior and adsorption mechanism of pollutants onto electron beam-aged microplastics

Microplastics, as an emerging pollutant, are widely distributed worldwide. Extensive research has been conducted to address the issue of microplastic pollution; however, effective methods for microplastic treatment are still lacking. This study innovatively utilizes electron beam technology to age and degrade microplastics. Compared to other treatment methods, electron beam technology can effectively promote the aging and degradation of microplastics. The Oxygen - carbon ratio of aged microplastics reached 0.071, with a mass loss of 48 % and a carbonyl index value of 0.69, making it the most effective method for short-term aging treatment in current research efforts. Theoretical calculations and experimental results demonstrate that a large number of oxygen-containing functional groups are generated on the surface of microplastics after electron beam irradiation, changing their adsorption performance for pollutants. Theoretical calculations show that an increase in oxygen-containing functional groups on the surface leads to a gradual decrease in hydrophobic pollutant adsorption capacity while increasing hydrophilic pollutant adsorption capacity for aged microplastics. Experimental studies were conducted to investigate the adsorption behavior and process of typical pollutants by aged microplastics which conform to pseudo-second-order kinetics and Henry model during the adsorption process, and the adsorption results are consistent with theoretical calculations. The results show that the degradation of microplastics is mainly due to hydroxyl radicals generated by electron beam irradiation, which can break the carbon chain of microplastics and gradually degrade them into small molecular esters and alcohols. Furthermore, studies have shown that microplastics can desorb pollutants in pure water and simulated gastric fluid. Overall, electron beam irradiation is currently the most effective method for degrading microplastics. These results also clearly elucidate the characteristics and mechanisms of the interaction between aged microplastics and organic pollutants, providing further insights for assessing microplastic pollution in real-world environments.

Eco-friendly regeneration of lignin with acidic deep eutectic solvent for adsorption of pollutant dyes for water cleanup

In this study, a simple and eco-friendly method was used to treat alkaline lignin with an acidic deep eutectic solvent (DES) to obtain regenerated lignin for the efficient adsorption of pollutant dyes from aqueous environment. Based on the yield and adsorption capacity of the sorbent for these dyes, conditions such as the type and concentration of DES component, solid-to-liquid ratio, reaction time, and temperature were optimized. By characterizing and comparing alkali lignin with regenerated lignin, a series of reactions were demonstrated to occur during the DES treatment process. The performance and mechanism of methylene blue and rhodamine B adsorption on regenerated lignin were studied systematically, and the maximum adsorbed amounts were 348.29 and 551.05 mg/g at 323 K, respectively. This study provides a new strategy for the green preparation of functionalized lignin and its use in the water pollutant treatment.

Preparation of carbon-rich material from Dendrobium officinale polysaccharide in deep eutectic system

A carbon-rich material (DESysChar) was prepared from polysaccharide within a deep eutectic system (DESys) containing oxalic acid, and systematically characterized using various analytical techniques. The investigation of reaction mechanism revealed concurrent dehydration and etherification processes. This study commenced with the extraction of plant polysaccharide using the DESys-based mechanochemical extraction method from Dendrobium officinale. Subsequently, the DESys method was used to carbonize the extracted Dendrobium officinale polysaccharide and produce DESysChar. DESysChar was then used for the adsorption and determination of pollutants in water. This study represents a significant advancement in eco-friendly material synthesis, enabling the low-temperature (120 °C) carbonization of plant-derived polysaccharides, thereby reducing energy consumption and environmental impact. The effective adsorption of methylene blue by DESysChar underscores its potential in environmental remediation. This study presents a more responsible and efficient approach to polysaccharide extraction and carbonization, addressing environmental concerns. Embracing the 4S workflow (involving Sustainable raw materials converted into Sustainable degradable products, by using Sustainable technology throughout the process to create a Sustainable environment) promotes sustainability in material development, laying the foundation for future eco-friendly practices in various industries. In summary, this study propels sustainable polysaccharide development for widespread use.

Polarity and functionality tailored conjugated microporous polymer coatings on silica microspheres for enhanced pollutant adsorption

Many sources of pollution that are generated by modern society are not addressable by conventional methods. Especially organic compounds, like pharmaceutics, are particularly hard to remove from waterbodies. Herein, a new approach is presented using conjugated microporous polymers (CMPs) to coat silica microparticles yielding specifically tailored adsorbents. The CMPs are generated with three different monomers: 2,6-dibromonaphthalene (DBN), 2,5-dibromoaniline (DBA) and 2,5-dibromopyridine (DBPN) respectively coupled to 1,3,5-triethynylbenzene (TEB) via Sonogashira coupling. By optimizing the polarity of the silica surface, all three CMPs were converted into microparticle coatings. The resulting hybrid materials feature the advantages of being adjustable in polarity and functionality, as well as morphology. Sedimentation allows facile removal of the coated microparticles after the adsorption. Further, the expansion of the CMP to a thin coating increases the accessible surface area compared to the bulk material. These effects were demonstrated by the adsorption of the model drug diclofenac. Thereby, the aniline-based CMP proved to be most advantageous due to a secondary crosslinking mechanism of amino and alkyne functionalities. An outstanding adsorption capacity of 228 mg diclofenac per gram of the aniline CMP within the hybrid material was achieved. This represents a five-fold increase compared to the value obtained by the pure CMP material underlining the advantages of the hybrid material.

Modeling, optimization and understanding of adsorption process for pollutant removal via machine learning: Recent progress and future perspectives

It is crucial to reduce the concentration of pollutants in water environment to below safe levels. Some cost-effective pollutant removal technologies have been developed, among which adsorption technology is considered as a promising solution. However, the batch experiments and adsorption isotherms widely employed at present are inefficient and time-consuming to some extent, which limits the development of adsorption technology. As a new research paradigm, machine learning (ML) is expected to innovate traditional adsorption models. This reviews summarized the general workflow of ML and commonly employed ML algorithms for pollutant adsorption. Then, the latest progress of ML for pollutant adsorption was reviewed from the perspective of all-round regulation of adsorption process, including adsorption efficiency, operating conditions and adsorption mechanism. General guidelines of ML for pollutant adsorption were presented. Finally, the existing problems and future perspectives of ML for pollutant adsorption were put forward. We highly expect that this review will promote the application of ML in pollutant adsorption and improve the interpretability of ML.

Microgels based on 0D-3D carbon materials: Synthetic techniques, properties, applications, and challenges

Microgels are three-dimensional (3D) colloidal hydrogel particles with outstanding features such as biocompatibility, good mechanical properties, tunable sizes from submicrometer to tens of nanometers, and large surface areas. Because of these unique qualities, microgels have been widely used in various applications. Carbon-based materials (CMs) with various dimensions (0-3D) have recently been investigated as promising candidates for the design and fabrication of microgels because of their large surface area, excellent conductivity, unique chemical stability, and low cost. Here, we provide a critical review of the specific characteristics of CMs that are being incorporated into microgels, as well as the state-of-the art applications of CM-microgels in pollutant adsorption and photodegradation, H₂ evoluation, CO₂ capture, soil conditioners, water retention, drug delivery, cell encapsulation, and tissue engineering. Advanced preparation techniques for CM-microgel systems are also summarized and discussed. Finally, challenges related to the low colloidal stability of CM-microgels and development strategies are examined. This review shows that CM-microgels have the potential to be widely used in various practical applications.

Enhanced photocatalytic efficiency by direct photoexcited electron transfer from pollutants adsorbed on the surface valence band of BiOBr modified with graphitized C

Herein, a novel BiOBr photocatalyst with partial surface modification by graphitized C (BiOBr-C_g) was synthesized through a hydrothermal method with hydrothermal carbonation carbon (HTCC) as a slow-releasing carbon source and characterized by experimental and theoretical methods. BiOBr-C_g exhibited excellent visible-light photocatalytic performance toward various refractory pollutants, such as bisphenol A, ibuprofen, ciprofloxacin, 2,4-dichlorophenoxyacetic acid, and diphenhydramine. The characterization results demonstrate that a strong molecular orbital interaction occurs between graphitized C and BiOBr, resulting in the formation of a new surface valence band on graphitized C. This not only promotes the oxidation of pollutants by surface holes but also reduces the recombination of carriers during the bulk phase transfer process, thereby increasing the number of photogenerated carriers. Intriguingly, the analytical results for degradation intermediates and other characterization techniques demonstrate that the pollutants adsorbed on the graphitized C of BiOBr-C_g can be directly excited through light irradiation and react along the organic radical degradation pathway in addition to pollutant degradation by holes and HO₂^•/O₂^•-.

Effectively removing indole-3-butyric acid from aqueous solution with magnetic layered double hydroxide-based adsorbents

The magnetic layered double hydroxide-based materials (MLDHs) with the metal composition of Mg(II)Al(III) were synthesized by different conditions as the adsorbent for removal of a phytohormone, indole-3-butyric acid (IBA). The morphological characteristics of MLDHs were studied through various characterization methods such as XRD, SEM, TEM, FTIR, BET, Zeta-potential and VSM. The adsorption results showed that the adsorption capacity of MLDH-1 synthesized by co-precipitation method with ammonia as the base source was the best (maximum 522.6 mg/g). The extent of adsorption in the pH range of 3.0-9.0 was observed to be no noticeable change. From the economical point of view, 1.0 g/L MLDH-1 composites were selected as optimum parameter. For a given adsorbent concentration (C_s), its kinetics and adsorption isotherm followed the pseudo-second-order and Liu isotherm model, respectively. The adsorbed sample can be easily magnetically separated and regenerated with NaNO₃. The adsorption process was spontaneous and exothermic, including two path stages: surface adsorption of lamellar and interlayer anion exchange. The research makes a contribution to evaluating the ability of MLDHs in IBA removal and helping the public to understand the mechanism of adsorption process.

Influence of physicochemical properties of road dust on the build-up of hydrocarbons

Understanding the factors influencing the build-up behaviour of different pollutants accumulated on urban roads is essential for the implementation of effective stormwater pollution mitigation strategies. Even though a significant knowledge base exists on different factors influencing hydrocarbon build-up, there is a dearth of evidence on how physicochemical properties of road dust influence hydrocarbon build-up. Accordingly, this study investigated the relationships between physicochemical properties of road dust and hydrocarbons associated with different particle size fractions of road dust. Hydrocarbons with different sources of origin in all size fractions showed a significant correlation with different soil constituents of road dust, predominantly with organic matter, amorphous matter, clay minerals and clay forming minerals of feldspars. However, the physicochemical properties influencing the hydrocarbon build-up is different among different particle size fractions. The interactions identified between hydrocarbon compounds and different minerals associated with road dust will contribute to the development of effective stormwater pollution mitigation strategies.