Utility of an alternative method (to USEPA Method 1613) for analysis of priority persistent organic pollutants in soil from mixed industrial-suburban areas of Durban, South Africa

This study evaluates the adequacy of a USEPA Method 1613 alternative analytical method for analysis of persistent organic pollutants (POPs) in soil from the immediate vicinity of industrialized areas in the eThekwini municipal area in South Africa. The objective of this study is in line with the Stockholm Convention Article 11 on research, development, and monitoring. Furthermore, it became imperative to find an alternative analytical procedure to USEPA Method 1613 that could cater to studies conducted in Africa where recent reviews have indicated that most African countries lack the technical and instrumental capacity for performing analysis of dioxin-like compounds according to USEPA Method 1613, which entails the use of high-resolution chromatography and high-resolution mass spectrometry instrumentation. The study aimed to ascertain the utility of an alternative two-dimensional gas chromatography-time of flight mass spectrometry method for analysis of trace-level priority POPs in soil, along with a fast single quadrupole gas chromatography-mass spectrometry method. The analytical methods were applied to the analysis of POPs on soil samples from industrial areas with oil refineries and a pulp and paper manufacturing company, while other samples were collected near the electricity substations and a landfill site. Analytical results showed BDE 209 as the dominant contaminating polybrominated diphenyl ether (concentration ranges from 0.006 to 5.71 ng g^-1 ). Polybrominated biphenyls (PBBs) 9, 10, and 49 were the dominant PBBs detected in 78% of the sites tested, although their concentrations were below the limit of quantification (LOQ). Polychlorinated dibenzo-p-dioxins and furans and dioxin-like polychlorinated biphenyls detected could not be quantified above their respective LOQs, indicating that the Durban area has low priority pollutant contamination levels compared to other regions around the world. The methods developed are a starting point that will inform considerations for routine evaluation and management of soil contamination, which plays a vital role in environmental management. Integr Environ Assess Manag 2023;19:749-762. © 2022 SETAC.

Assessment of PCDD/Fs formation and emission characteristics at a municipal solid waste incinerator for one year

Municipal solid waste incineration (MSWI) has become a predominant emission source of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs). Research focusing on the impact of operating conditions, environmental changes, and operating time on the generation and emissions of PCDD/Fs has not been resolved. To this end, this study tracked and investigated the PCDD/Fs and 17 congener emissions of a typical grate incinerator (800 t/d) continuously for one year. Results showed that the PCDD/Fs concentration at the boiler outlet, stack inlet, and bag filter, including normal and abnormal operation conditions, ranges from 2.11E-02-41.86 ng I-TEQ/Nm³, 7.00E-04-6.76 ng I-TEQ/Nm³, and 1.12-2.90E+03 ng I-TEQ/Nm³, respectively. The 2,3,4,7,8-P₅CDF has the highest contribution in all samples, in which a proportion of TEQ ranged from 30 % to 77.73 %. Moreover, by applying the correlation analysis between PCDD/Fs and operating parameters, the emission characteristic is mainly affected by incinerators and boilers during the normal period, and it is affected by the whole MSWI process under abnormal conditions. In addition, the PCDD/Fs emission from the MSWI plant gradually increases from spring to winter. This study is beneficial for supporting the control of PCDD/Fs emission reduction and assisting the operators to optimize the relevant operating parameters of the MSWI plant to achieve a stable and up-to-substandard emissions during the operation period.

Emissions of PAHs, PCDD/Fs, dl-PCBs, chlorophenols and chlorobenzenes from municipal waste incinerator cofiring industrial waste

Concentrations and distributions of PAHs and chlorinated aromatic compounds including PCDD/Fs, dl-PCBs, chlorophenols (CPs), and chlorobenzenes (CBz) in the municipal waste incinerator are investigated to characterize their formation and emission via intensive stack sampling. In addition, the toxicity of fly ash contribution by PCDD/Fs and dl-PCBs is evaluated in this study. The results reveal that concentrations of PCDD/Fs and dl-PCBs in flue gas are significantly lower than those of CPs, CBz, and PAHs. Additionally, the removal efficiencies of PAHs and chlorinated aromatic compounds achieved with existing air pollution control devices are evaluated, indicating that the removal efficiencies achieved with activated carbon injection + baghouse (95-99%) are higher than those with semi-dry scrubber (SDS). Besides, PCDD/Fs and PCBs TEQ concentrations in SDS and BH ashes are within 1.61-2.66 WHO-TEQ/g and 0.09-0.19 WHO-TEQ/g, respectively. Furthermore, the calculated mass flow rates suggest that the input rate of PCDD/Fs and dl-PCBs of SDS are 60.24 mg/h and 59.74 mg/h, respectively. The mass flow rates of PCDD/Fs and dl-PCBs after SDS in flue gas are 32.47 mg/h and 49.73 mg/h, respectively. However, the discharge rates of PCDD/Fs and dl-PCBs from SDS are 120.60 mg/h and 27.05 mg/h, respectively, indicating that PCDD/Fs are significantly formed within the SDS. PCDD/Fs formation is attributed to the operating temperature of SDS (240 ± 11.5 °C), which is within the temperature window for de novo synthesis. Thus, operating parameters of the APCDs should be optimized to reduce the formation of PAHs and chlorinated aromatic pollutants from MWI.