Effectiveness of potassium ferrate (VI) as a green agent in the treatment and disinfection of carwash wastewater

Carwash wastewater treatment with potassium ferrate (VI) (K₂FeO₄) was optimized by response surface methodology. The optimum conditions for chemical oxygen demand removal were established a pH 3.5, 0.328 g/L dose of K₂FeO₄, and with a process duration of 48 min. At these conditions, chemical oxygen demand, total organic carbon, total nitrogen, and total phosphorus decreased by 70.3, 58.9, 73.3, 82.0%, respectively; and the putrid odor was reduced. Simultaneously, the total viable count, total coli count, most probable number of fecal enterococci, and the total proteolytic bacteria count decreased by 89.5, 93.1, 92.9, and 95.0 %, respectively. Comparatively, an application of 0.450 g/L FeCl₃·6H₂O corresponding to the iron content in 0.328 g/L of K₂FeO₄ resulted in a decrease of total viable count, total coli count, most probable number of fecal enterococci and the total proteolytic bacteria count only by 38.1, 31.2, 42.9, and 58.0%, respectively. Therefore, flocculation with polyacrylamide anionic flocculant combined with potassium ferrate (VI) oxidation is a more effective alternative to coagulation with FeCl₃ and the same flocculant. The use of potassium ferrate (VI) is a viable option for the treatment of carwash wastewater.

Degradation of chloramphenicol by potassium ferrate (VI) oxidation: kinetics and products

The oxidation of chloramphenicol (CAP) by potassium ferrate (VI) in test solution was studied in this paper. A series of jar tests were performed at bench scale with pH of 5-9 and molar ratio [VI/CAP] of 16.3:1-81.6:1. Results showed that raising VI dose could improve the treatment performance and the influence of solution pH was significant. VI is more reactive in neutral conditions, presenting the highest removal efficiency of CAP. The rate law for the oxidation of CAP by VI was first order with respect to each reactant, yielding an overall second-order reaction. Furthermore, five oxidation products were observed during CAP oxidation by VI. Results revealed that VI attacked the amide group of CAP, leading to the cleavage of the group, while benzene ring remained intact.

Reaction kinetics and oxidation product formation in the degradation of acetaminophen by ferrate (VI)

This paper investigates the degradation of acetaminophen (AAP) in aqueous solutions by ferrate (VI), aiming to propose the kinetics, pathways and the oxidation products' formation in the AAP degradation. A series of jar tests were undertaken over ferrate (VI) dosages (molar ratios of ferrate (VI):AAP, 5:1 to 25:1) and pH values (4-11). The effects of co-existing ions (0.2-5 mM) and humic acid (10-50 mg l(-1)) on the AAP removal were investigated. Ferrate (VI) can remove 99.6% AAP (from 1000 μg l(-1)) in 60 min under study conditions when majority of the AAP reduction occurred in the first 5 min. The treatment performance depended on the ferrate(VI) dosage, pH and the type and strength of co-existing ions and humic acid. Raising ferrate (VI) dosage with optimal pH 7 improved the AAP degradation. In the presence of humic acid, the AAP degradation by ferrate (VI) was promoted in a short period (<30 min) but then inhibited with increasing in humic acid contents. The presence of Al(3+), CO3(2-) and PO4(3-) ions declined but the existence of K(+), Na(+), Mg(2+) and Ca(2+) ions can improve the AAP removal. The catalytic function of Al(3+) on the decomposition of ferrate (VI) in aqueous solution was found. The kinetics of the reaction between ferrate (VI) and AAP was pseudo first-order for ferrete (VI) and pseudo second-order for AAP. The pseudo rate constant of ferrate (VI) with AAP was 1.4 × 10(-5) L(2) mg(-2) min(-1). Three oxidation products (OPs) were identified and the AAP degradation pathways were proposed.