A practical chromogenic and fluorogenic dual-mode sensing platform for rapid quantification of sulfite in food

Sulfur dioxide (SO2) and its derivatives (HSO3- and SO32-) are widely used in food-processing. Whereas excessive consumption of sulfur dioxide and its derivatives (>0.70 mg·kg-1day-1) severely endangers human health. In this work, we rationally constructed a practical dual-mode probe (dicyanomethylene)-1-methyl-1,4-dihydroquinolin-2-yl)vinyl)-1-methylquinolinium (QMN), which underwent a specific 1, 4-Michael addition with sulfite to afford a noticeable color change from pale yellow to red along with a high-contrast fluorescence turn-on response at 598 nm. QMN has the advantages of rapid response, high signal-to-noise ratio, excellent selectivity, good water-solubility, large Stokes shift and low detection limit (LOD = 31.9 nM). QMN has been successfully used to on-site visually determine sulfite in a diversity of foods with satisfactory recoveries (91.33-111.33 %) and high accuracy (93.74-98.71 %). Furthermore, a portable smartphone-based fluorescence sensing platform was fabricated for on-site determination of sulfite in food with good performance.

Ratiometric fluorometric and colorimetric dual-signal sensing platform for rapid analyzing Cr(VI), Ag(I) and HCHO in food and environmental samples based on N-doped carbon nanodots and o-phenylenediamine

Nitrogen-doped carbon nanodots (N-CNDs) were synthesized simply and efficiently using glutathione. The fluorescence emission of N-CNDs at 430 nm was effectively quenched by the fluorophore 2,3-diaminophenazine (DAP), produced through the oxidation of o-phenylenediamine (OPD) under the catalysis of Cr(VI)/Ag(I). This quenching was attributed to the fluorescence resonance energy transfer effect, while a new fluorescence emission at 560 nm was observed. Furthermore, the redox and chromogenic reaction of Cr(VI) and OPD at pH 5.4 could be effectively inhibited by formaldehyde (HCHO), resulting in the activation of N-CNDs fluorescence and the quenching of DAP fluorescence. Consequently, dual-signal sensing platforms for the rapid analysis of Cr(VI) and Ag(I) using N-CNDs/OPD and HCHO using N-CNDs/OPD/Cr(VI) were successfully constructed. By incorporating a masking reagent such as H2O2 for Cr(VI) and Cl- for Ag(I), the established sensing platform exhibited excellent selectivity and practical applicability for detecting Cr(VI), Ag(I), and HCHO in food and environmental samples.

Novel dual-responsive hydrogel composed of polyacrylamide/Fe-MOF/zinc finger peptide for construction of electrochemical sensing platform

Responsive hydrogels have received much attention for improving the detection performance of electrochemical sensors because of their special responsiveness. However, current responsive hydrogels generally suffer from long response times, ranging from tens of minutes to several hours. This situation severely limits the detection performance and practical application of electrochemical sensors. Here, an electrochemical sensing platform was constructed by employing dual-responsive polyacrylamide/zinc finger peptide/Fe-MOF hydrogel (PZFH) as the silent layer, sodium alginate-Ni2+-graphene oxide hydrogel as the signal layer. GOx@ZIF-8, as the immunoprobe, catalyzed glucose to H2O2 and gluconic acid, resulting in the cleavage of immunoprobe as the pH decreased and subsequent release of Zn2+ ions. During the process of Fe-MOF converting from Fe3+ to Fe2+, free radicals were generated and used to destroy the structure of the PZFH. Cysteine and histidine in the zinc finger peptide can specifically bind to Zn2+ to create many pores in PZFH, exposing the signal layer. These synergistic effects rapidly decreased the impedance of PZFH and increased the electrochemical signal of Ni2+. The electrochemical sensing platform was used to detect pro-gastrin-releasing peptide with response times as short as 7 min of PZFH, a wide linear range from 100 ng mL-1 to 100 fg mL-1, and an ultra-low limit of detection of 14.24 fg mL-1 (S/N = 3). This strategy will provide a paradigm for designing electrochemical sensors.

Hollow Prussian blue with ultrafine silver nanoparticle agents (Ag-HPB) integrated sensitive and flexible biosensing platform with highly enzyme loading capability

Herein, the hollow Prussian blue with ultra-small silver nanoparticle agents (Ag-HPB) was prepared by the coating-etching method by applying Prussian blue (PB) coating on Ag nanoparticles (Ag NPs) and diffusing Ag NPs into the PB framework. The flexible biosensing platform based on Ag-HPB nanocomposites incorporated the excellent electrical conductivity of Ag NPs and the superior enzyme loading capacity of the hollow structure, which significantly enhanced its sensing performance. Subsequently, take glucose oxidase (GOx) and acetylcholinesterase (AChE) as examples. The sensing platform displayed a good sensitive response to glucose (Glu) (24.37 μA mM-1 cm-2) and a considerable limit of detection (LOD) for trichlorfon (TCF) as 2.28 pg/mL while exhibiting high stability and good reproducibility. Moreover, it can be applied to monitor trichlorfon in apple samples. Promisingly, the Ag-HPB prepared by the coating-etching strategy provides a reliable strategy for further development of sensitive and flexible biosensing platforms with excellent electrical conductivity and high enzyme loading.

Surface imprinting by using bi-functional monomers on spherical template magnetite for selective detection of levodopa in biological fluids

The present work introduces an innovative biosensing platform for greatly sensitive determination of levodopa medicine. Initially, spherical magnetic (SM) nanoparticles were prepared by hydrothermal fabrication approach and used as a pattern to make spherical magnetic molecular imprinted polymer (SMMIP). Afterward, levodopa-molecularly imprinted layer was grown on the surface of the spherical magnetic pattern by electropolymerization with dopamine and resorcinol as bi-functional monomers and levodopa as a template molecule, which enhanced the specific recognition of the sensing platform to levodopa. The presence of SM nanoparticles could not only accelerate the mass transfer, the electron transport rate, and improve specific surface area of the electrode but also facilitate the recognition of the polymer, in this way increasing the current response and improving the performance of the biosensor. The superior sensing efficiency of the presented biosensor was confirmed based on the low limit of detection of 10 nmol L^-1 which represented two linear ranges from 0.5 to 200 μmol L^-1 and 200-1000 μmol L^-1 for levodopa. More importantly, the practicability of the biosensor was proved by detecting levodopa in tablet, blood serum and plasma, implying that the sensing platform was suitable for monitoring levodopa in actual biological fluid and medicine.

Dual-mode biosensing platform for sensitive and portable detection of hydrogen sulfide based on cuprous oxide/gold/copper metal organic framework heterojunction

Hydrogen sulfide (H2S) can not only be regarded as a critical gas signal transduction substance, but also its excess levels can lead to a range of diseases. Currently, the accurate analysis combined with electrochemical (EC) or photothermal (PT) technology for H2S in a complex biological system remains a significant challenge. Herein, an endogenous H2S-triggered heterojunction cuprous oxide/gold/copper metal organic framework (Cu2O/Au/HKUST-1) nanoprobe is designed for dual-mode EC- second near-infrared (NIR-II)/PT analysis in tumor cells with high sensitivity and simplicity. Dual-mode EC quantification - PT is achieved through "off-on" mode of EC and PT signals based on electronic transfer and biosynthesis via an in situ sulfuration reaction. Under the optimum conditions, the EC quantification mode for trace H2S exhibits a wide linear range and an excellent limit of detection of 0.1 μM. More importantly, the dual-mode can display the selective detection of trace H2S in living tumor cells because of the specific interaction between copper ion and H2S. These results provide a new EC-PT promising biosensing platform for noninvasive intelligent detection of H2S in living tumor cells.

A sensing platform based on zinc-porphyrin derinative in hexadecyl trimethyl ammonium bromide (CTAB) microemulsion for highly sensitive detection of theophylline

A new porphyrin-based sensing platform in hexadecyl trimethyl ammonium bromide (CTAB) microemulsion is developed for highly sensitive detection of theophylline. In this sensing system, the zinc-porphyrin-cinnamic acid conjugate (Zn-TPPCA) works as fluorescence probe while theophylline can decrease fluorescence intensity of the probe. Further studies indicate the linear relationship between the fluorescence quenching value and the concentration of theophylline within a given range. And the introduction of CTAB microemulsion can greatly enhance sensibility and stability of this detecting system and facilitate the detection of theophylline. On the basis above, a highly sensitive sensing platform for theophylline is created with a low limit of detection (LOD) of 0.0083 μg mL^-1 under the optimal detection conditions. And further application of this method in determination of commercially available theophylline preparation shows excellent results. Subsequent studies on quenching mechanism indicate that static quenching appears between Zn-TPPCA and theophylline. Therefore, this work provides not only a highly sensitive method for determination of theophylline but also further evidence for creation of biosensors for drugs with porphyrin derivatives.

Liquid crystal-based sensitive and selective detection of uric acid and uricase in body fluids

The abnormal levels of uric acid (UA) in body fluids are associated with gout, type (II) diabetes, leukemia, Lesch-Nyhan syndrome, uremia, kidney damage, and cardiovascular diseases. Also, the presence of uricase (UOx) symbolizes genetic disorders and corresponding complications. Therefore, the detection of UA and UOx in the body fluids is significant for clinical diagnosis. 4-Cyano-4'-pentylbiphenyl (5CB, a nematic liquid crystal (LC)) was doped with octadecyl trimethylammonium bromide (OTAB, a cationic surfactant), which formed a self-assembled monolayer at the aqueous/5CB interface. The UOx-catalyzed oxidation of UA yielded H₂O₂, releasing the single-strand deoxyribonucleic acid (ssDNA) from the nanoceria/ssDNA complex. The interaction of the released ssDNA with OTAB disrupted the monolayer at the aqueous/5CB interface, which resulted in a dark to bright change when observed through a polarized optical microscope. The LC-based sensor allowed the detection of UA with a linear range of 0.01-10 μM and a limit of detection (LOD) of 0.001 μM. The UA detection was also performed in human urine samples and the results were comparable to that of a standard commercial colorimetric method. Similarly, the detection of UOx was performed, with a noted linear range of 20-140 μg/mL. The LOD was as low as 0.34 μg/mL. The detection of UOx was also demonstrated in human serum samples with excellent performance. This method provides a robust sensing platform for the detection of UA and UOx and has potential for applications in clinical analysis.

Bimetallic molecularly imprinted nanozyme: Dual-mode detection platform

Molecularly imprinted polymer nanozyme (MIL-101(Co,Fe)@MIP) with bimetallic active sites and high-efficiency peroxidase-like (POD-like) activity were synthesized for the ratiometric fluorescence and colorimetric dual-mode detection of vanillin with high selectivity and sensitivity. Compared with the monometallic nanozyme, the POD-like activity of bimetallic nanozyme was greatly enhanced by changing the electronic structure and surface structure. Ratiometric fluorescence and colorimetric dual-mode detection of vanillin in aqueous solution was realized by vanillin entering specific imprinted cavities and blocking the molecular channels on the surface of MIL-101(Co,Fe)@MIP and the dual-mode visual detection was also realized. The limits of detection were as low as 104 nM and 198 nM, respectively. The method proposed in this paper was applied to the real samples of ice cream and candy. And the recoveries were between 93.3% and 105.5%, which also reached a satisfactory degree. The further detection of dexamethasone and prednisone, two drugs belonging to glucocorticoid, proved that the nanozyme analysis method based on MIL-101(Co,Fe)@MIP could be developed into a sensing platform.

Copper sulfide nanoplates as nanosensors for fast, sensitive and selective detection of DNA

The present communication reports on a novel high-sensitivity DNA sensor based on cooper sulfide nanoplates (CuS NPs). The CuS NPs are successfully synthesized through a mild one-step hydrothermal method. As an efficient nanosensor for the fluorescent detection of DNA, the CuS NPs possess high sensitivity and selectivity with a detection limit of 25pM.

Boron nitride nanosheets as a platform for fluorescence sensing

Hexagonal boron nitride nanosheets (BNNS), one kind of inorganic graphene analogue, exhibit high fluorescence quenching ability via the photo-induced electron transfer (PET) and different affinity toward single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). As a proof of concept, the BNNS was first used as a sensing platform for the rapid detection of DNA and small molecules with high sensitivity and selectivity in this study. This strategy is versatile and quick fluorescence sensing of DNA and extensive DNA related analytes such as metal cations and small molecules. Moreover, this strategy might be available for the practical application in future. This work provides an avenue for understanding the interaction between two-dimensional nanomaterials and biomolecules and designing novel sensing strategies for extending the applications of nanomaterials in bioanalysis.

Highly-sensitive electrochemical sensing platforms for food colourants based on the property-tuning of porous carbon

It is very challenging to develop highly-sensitive analytical platforms for toxic synthetic colourants that widely added in food samples. Herein, a series of porous carbon (PC) was prepared using CaCO3 nanoparticles (nano-CaCO3) as the hard template and starch as the carbon precursor. Characterizations of scanning electron microscopy and transmission electron microscopy indicated that the morphology and porous structure were controlled by the weight ratio of starch and nano-CaCO3. The electrochemical behaviours of four kinds of widely-used food colourants, Sunset yellow, Tartrazine, Ponceau 4R and Allura red, were studied. On the surface of PC samples, the oxidation signals of colourants enhanced obviously, and more importantly, the signal enhancement abilities of PC were also dependent on the starch/nano-CaCO3 weight ratio. The greatly-increased electron transfer ability and accumulation efficiency were the main reason for the enhanced signals of colourants, as confirmed by electrochemical impedance spectroscopy and chronocoulometry. The prepared PC-2 sample by 1:1 starch/nano-CaCO3 weight ratio was more active for the oxidation of food colourtants, and increased the signals by 89.4-fold, 79.3-fold, 47.3-fold and 50.7-fold for Sunset yellow, Tartrazine, Ponceau 4R and Allura red. As a result, a highly-sensitive electrochemical sensing platform was developed, and the detection limits were 1.4, 3.5, 2.1 and 1.7 μg L(-1) for Sunset yellow, Tartrazine, Ponceau 4R and Allura red. The practical application of this new sensing platform was demonstrated using drink samples, and the detected results consisted with the values that obtained by high-performance liquid chromatography.