A new concept of biocatalytic synthesis of acrylic monomers for obtaining water-soluble acrylic heteropolymers

Rhodococcus strains were designed as model biocatalysts (BCs) for the production of acrylic acid and mixtures of acrylic monomers consisting of acrylamide, acrylic acid, and N-alkylacrylamide (N-isopropylacrylamide). To obtain BC strains, we used, among other approaches, adaptive laboratory evolution (ALE), based on the use of the metabolic pathway of amide utilization. Whole genome sequencing of the strains obtained after ALE, as well as subsequent targeted gene disruption, identified candidate genes for three new amidases that are promising for the development of BCs for the production of acrylic acid from acrylamide. New BCs had two types of amidase activities, acrylamide-hydrolyzing and acrylamide-transferring, and by varying the ratio of these activities in BCs, it is possible to influence the ratio of monomers in the resulting mixtures. Based on these strains, a prototype of a new technological concept for the biocatalytic synthesis of acrylic monomers was developed for the production of water-soluble acrylic heteropolymers containing valuable N-alkylacrylamide units. In addition to the possibility of obtaining mixtures of different compositions, the advantages of the concept are a single starting reagent (acrylamide), more unification of processes (all processes are based on the same type of biocatalyst), and potentially greater safety for personnel and the environment compared to existing chemical technologies.

Water-soluble polymers: Emerging contaminants detected, separated and quantified by a novel GPC/MALDI-TOF method

Water-soluble polymers (WSPs) are additives used as thickeners, stabilisers and flocculants in industry and in household products, including personal care products. Given their widespread use, it is likely WSPs enter the environment, particularly through wastewaters. This is of concern as there is little ecotoxicological research on their fate and behaviour once in the environment, which means their risk to aquatic life is not understood. The lack of suitable analytical techniques to detect, characterise and quantify WSPs hinders research on the potential impact of these polymers. A novel method has been developed that identifies polymers within a sample and separates them using gel-permeation chromatography (GPC). This is coupled with matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOF MS), to quantify the polymer fractions using molecular weight information. This process has been carried out on a range of aqueous media. Polyethylene glycol (PEG) ingredients were successfully separated from non-polymeric material in a commercial shaving gel personal care product (PCP), before being quantified at 1.62 wt%. This method was applied to a spiked wastewater influent sample to demonstrate the extraction and separation of PEG from organic constituents such as dissolved organic matter (DOM). This highlighted the additional challenges of analysing WSPs in the environment, as factors such as sorption and biodegradation affected the total recovery of PEG, with an extraction efficiency of 53%. Overall, this method was applied for the extraction of PEG from a PCP with accurate quantification, before a proof-of-concept extraction from wastewater demonstrated the difficulties associated with WSP analysis in environmental samples. This method provides opportunities to use tandem GPC/MALDI-TOF MS to quantify WSPs in a broad array of environmental samples. Additional studies could include its application to wastewater or freshwater monitoring.

Performance optimization and mechanism analysis of applied Enteromorpha-based composite dust suppressant

In order to solve the problem of environmental pollution caused by the escape of coal dust in open-pit coal mines, a composite dust suppressant was prepared from Enteromorpha, and the preparation factors (water-soluble polymer, temperature, solid content and surfactant) were optimized. The mechanism of dust suppression and the possibility of large-scale field application were discussed. The research results on the related properties of dust suppressants showed that the performance of Enteromorpha-based dust suppressants prepared by this method was excellent compared with similar studies. Among them, polyacrylamide (PAM) Enteromorpha-based dust suppressant had the best performance, with viscosity of 25.1 mPa s and surface tension of 27.05 mN/m. Moreover, PAM Enteromorpha-based dust suppressant had the best effect, with the mass loss of 2.94% under the wind speed of 10 m/s and the coal dust loss rate of 4.6% after rain erosion, and it had strong water retention performance. Through the discussion of dust suppression mechanism, it was found that the mechanical entangled network structure with hydrogen bonds as nodes was formed after the graft copolymerization of PAM and Enteromorpha. It had high permeability and good adhesion. After quickly wetting coal dust, it formed a dense package for coal dust. The field experiment also showed that the use of Enteromorpha-based dust suppressant can effectively inhibit the escape of coal dust. From the point of view of economy and efficiency, Enteromorpha can save 30% of the material cost and the dust suppression efficiency can reach 89-94%. Therefore, the Enteromorpha-based dust suppressant may stably suppress coal dust on the basis of reducing the cost.

Regiospecific vs. non regiospecific click azide-alkyne polymerization: In vitro study of water-soluble antibacterial poly(amide aminotriazole)s

Novel linear cationic poly(amide aminotriazole)s (PATnD) with secondary amine groups in the backbone were obtained by using azide-alkyne 1,3-dipolar cycloaddition reactions: metal- and solvent-free (thermal conditions, PATTnD) or copper(I)-catalyzed (Sharpless conditions, PATCnD). PATnD were investigated in vitro against strains of E. coli, P. aeruginosa, S. aureus, and S. epidermidis. Hemolytic activity was tested using human red blood cells (hRBC), and very low or no hemolytic activity was observed. The cytotoxicity of PATnD polymers against Human Gingival Fibroblasts (HGnF) cells was concentration-dependent, and significant differences between PATT1D and PATC1D were observed. The ability of these polymers to induce resistance against both Gram-positive and Gram-negative bacteria was also assessed. Studied bacterial strains acquired resistance to catalytic polymers (PATCnD) in initial passages meanwhile resistance to thermal polymers (PATTnD) appears in later passages, being the increase of the minimum inhibitory concentration lower than in catalytic polymers. This result, together with the higher biocidal capacity of thermal polymers compared to catalytic ones, seems to suggest an influence of the regiospecificity of the polymers on their antibacterial characteristics. This study also demonstrates that PAT1D polymers, which do not appear to have strong hydrophobic residues, can exert significant antimicrobial activity against Gram-positive bacteria such as S. epidermidis. This pair of polymers, PATC1D and PATT1D, displays the greatest antimicrobial activity while not causing significant hemolysis along with the lowest susceptibility for resistance development of the polymers evaluated.

Direct photoreactive immobilization of water-soluble phospholipid polymers on substrates in an aqueous environment

The purpose of this study is to achieve a simpler and safer surface modification of substrates using a photoreactive polymer in an aqueous environment. We synthesized water-soluble photoreactive polymers with both phenylazide groups and phosphorylcholine groups, poly(2-methacryloyloxyethyl phosphorylcholine-co-4-methacryl tetra(ethylene glycol)oxycarbonyl-4-phenylazide) (PMEPAz), via reversible addition fragmentation chain transfer polymerization. PMEPAz with different polymerization degrees were synthesized with a well-defined structure. To immobilize PMEPAz on the substrate surface by photoreaction, it is necessary to adsorb the polymer on the substrate surface in an aqueous solution because the phenylazide groups chemically bind to the substrate via a hydrogen abstract reaction. The relationship between the polymer solubilization state in the aqueous solution and the adsorption behavior at the surface was investigated. PMEPAz began to form unstable molecular aggregates at a concentration of 10^-2 mg/mL and formed stable aggregates at 10⁰ mg/mL. At a concentration of 10^-1 mg/mL, unstable molecular aggregates of PMEPAz were formed in the aqueous solution, resulting in the maximization of the amount of adsorbed polymer and effective photoreaction with the substrate. The thickness of the reacted polymer layer on the substrate increased with an increase in the polymerization degree, a uniform polymer layer with a thickness of 3.4 nm was formed when the polymerization degree was 400. After surface modification, the hydrophobic surfaces of the original substrates became hydrophilic. Additionally, fibrinogen adsorption and platelet adhesion were effectively suppressed based on the characteristics of the phosphorylcholine unit.

A simple turn-on fluorescent chemosensor based on Schiff base-terminated water-soluble polymer for selective detection of Al3+ in 100% aqueous solution

A simple water-soluble polymer PEGBHB based on polyethylene glycol bearing a Schiff base derivative moiety was successfully designed and synthesized. PEGBHB showed high selectivity and sensitivity towards Al³⁺ as a turn-on fluorescent chemosensor without influence by other competitive metal ions in 100% aqueous solution. The detection limit of PEGBHB for Al³⁺ was found to be 9.67 × 10^-9 M. A 1:1 stoichiometry between PEGBHB and Al³⁺ has been confirmed by Job plot analysis. PEGBHB could detect Al³⁺ over a wide pH range from 4 to 10. The chemosensor was reversible by adding EDTA to the solution of PEGBHB-Al³⁺ complex. An INHIBIT molecular logic gate was constructed with the help of OFF-ON-OFF signal on alternate addition of Al³⁺ and EDTA to the chemosensor. Furthermore, test papers were fabricated facilely using PEGBHB for convenient and visual detection of practical Al³⁺.

Effect of surfactants or a water soluble polymer on the crystal transition of clarithromycin during a wet granulation process

To generate products containing a stable form of clarithromycin (CAM) (form II) regardless of the initial crystal form of CAM or type of granulation solvent, the effects of five surfactants, or a water-soluble polymer (macrogol 400) were determined on the crystal transition of CAM. The metastable form (form I) was kneaded with water, after adding surfactants, or a water-soluble polymer. Form II was also kneaded with ethanol, after adding the same additives. The resulting samples were analyzed by powder X-ray diffraction. Form I was completely converted to form II by a wet granulation using water with additives bearing polyoxyethylene chains such as polysorbate 80 (PS80), polyoxyl 40 stearate or macrogol 400. The granulation of the form II using ethanol with these additives did not result in a crystal transition to form I. Furthermore, CAM tablets were manufactured using granules with PS80, and these crystal forms and dissolution behaviors were investigated. As a result, the wet granulation of CAM with PS80 gave CAM tablets containing only form II and PS80 did not have any adverse effects on tablet characteristics. Therefore, these data suggests that the crystal form of CAM can be controlled to be form II using a wet granulation process with additives bearing polyoxyethylene chains regardless of the initial crystal form of CAM or type of granulation solvent.