A Dual Functional Bioinspired Lubricant for Osteoarthritis Treatment and Potential Prevention

Osteoarthritis (OA), primarily characterized by the deterioration of articular cartilage, is a highly prevalent joint-disabling disease. The pathological onset and progression of OA are closely related to cartilage lubrication dysfunction and synovial inflammation. Synergistic options targeted at restorative lubrication and anti-inflammation are expected to be the most attractive candidates to treat OA and perhaps help prevent it. Herein, a bioinspired lubricant (HA/PA@Lipo) was fabricated by combining anionic hyaluronan-graft-poly(2-acrylamide-2-methylpropanesulfonic acid sodium salt) (HA/PA) with cationic liposomes (Lipo) via electrostatic interaction. HA/PA@Lipo mimicked the lubrication complex located on the outer cartilage surface and was endowed cartilage with excellent cartilage-lubricating performances. After the antioxidant gallic acid (GA) was loaded for dual functionality, HA/PA@Lipo-GA was prepared with added anti-inflammatory properties. HA/PA@Lipo-GA showed favorable biocompatibility with C28/I2 cells, inhibited the production of reactive oxygen, and regulated the expression levels of anabolic genes and proteins. The therapeutic effects of HA/PA@Lipo-GA were evaluated using a sodium iodoacetate-induced OA rat model, and the preventive effects of HA/PA@Lipo-GA were estimated in vivo. The results suggested the robust potential of HA/PA@Lipo-GA with dual functions as a candidate option for OA treatment and prevention.

Prospects and Challenges of Microwave-Combined Technology for Biodiesel and Biolubricant Production through a Transesterification: A Review

Biodiesels and biolubricants are synthetic esters produced mainly via a transesterification of other esters from bio-based resources, such as plant-based oils or animal fats. Microwave heating has been used to enhance transesterification reaction by converting an electrical energy into a radiation, becoming part of the internal energy acquired by reactant molecules. This method leads to major energy savings and reduces the reaction time by at least 60% compared to a conventional heating via conduction and convection. However, the application of microwave heating technology alone still suffers from non-homogeneous electromagnetic field distribution, thermally unstable rising temperatures, and insufficient depth of microwave penetration, which reduces the mass transfer efficiency. The strategy of integrating multiple technologies for biodiesel and biolubricant production has gained a great deal of interest in applied chemistry. This review presents an advanced transesterification process that combines microwave heating with other technologies, namely an acoustic cavitation, a vacuum, ionic solvent, and a supercritical/subcritical approach to solve the limitations of the stand-alone microwave-assisted transesterification. The combined technologies allow for the improvement in the overall product yield and energy efficiency. This review provides insights into the broader prospects of microwave heating in the production of bio-based products.

Synthesis of Branched Biolubricant Base Oil from Oleic Acid

The mature manufacturing of synthetic lubricants (poly-α-olefins, PAO) proceeds through oligomerization, polymerization, and hydrogenation reactions of petrochemical ethylene. In this work, we utilize the inexpensive bio-derived oleic acid as raw material to synthesize a crotch-type C₄₅ biolubricant base oil via a full-carbon chain synthesis without carbon loss. It contains several cascade chemical processes: oxidation of oleic acid to azelaic acid (further esterification to dimethyl azelate) and nonanoic acid (both C₉ chains). The latter is then selectively hydrogenated to nonanol and brominated to the bromo-Grignard reagent. In a next step, a C₄₅ biolubricant base oil is formed by nucleophilic addition (NPA) of excessive C₉ bromo-Grignard reagent with dimethyl azelate, followed by subsequent hydrodeoxygenation. The specific properties of the prepared biolubricant base oil are almost equivalent to those of the commercial lubricant PAO6 (ExxonMobil). This process provides a new promising route for the production of value-added biolubricant base oils.

Enzymatic Synthesis of a Polyol Ester from Levulinic Acid and Trimethylolpropane and Its Tribological Behavior as Potential Biolubricant Basestock

In this study, a polyol ester from levulinic acid (LA) and trimethylolpropane (TMP) was synthesized by enzymatic catalysis in a solvent-free system. The total conversion of TMP reached up to 84% on average after lipase recycling for five times. The produced ester showed excellent lubrication properties, such as high viscosities at 40 °C (86.53 mm²/s) and 100 °C (8.91 mm²/s), a good viscosity index (49), a low pour point (−27 °C), and a high flash point (223 °C). The frictional wear behavior was evaluated on a four-ball test machine (FTM) by adding the ester into a reference mineral oil. The blend with 10% ester showed a smaller wear scar diameter (WSD) (0.62 mm) when compared with that of pure mineral oil (0.78 mm). The results demonstrated that the obtained ester has huge potential as biolubricant basestock.

A Synthetic Bottle-brush Polyelectrolyte Reduces Friction and Wear of Intact and Previously Worn Cartilage

A poly(7-oxanorbornene-2-carboxylate) polymer containing pendent triethyleneglycol (TEG) chains of 2.8 MDa ("2.8M TEG") was synthesized and evaluated for long-term lubrication and wear reduction of ex vivo bovine cartilage as well as for synovitis in rats and dogs after intra-articular administration. Bovine cartilage surfaces were tested under torsional friction for 10,080 rotations while immersed in either saline, bovine synovial fluid (BSF), or 2.8M TEG. For each solution, coefficient of friction (μ), changes in surface roughness, and lost cartilage glycosaminoglycan were compared. To directly compare 2.8M TEG and BSF, additional samples were tested sequentially in BSF, BSF, 2.8M TEG, and then BSF. Finally, another set of samples were tested twice in saline to induce surface roughness and then tested in BSF, Synvisc, or 2.8M TEG to determine each treatment's effect on worn cartilage. Next, male Lewis rats were injected in one knee with 2.8M TEG or saline and evaluated for effects on gait, and female beagles were injected with either 2.8M TEG or saline in one knee, and their synovial tissues analyzed for inflammation by H&E staining. Treatment with 2.8M TEG lowers μ, lessens surface roughness, and minimizes glycosaminoglycan loss compared to saline. The 2.8M TEG also reduces μ compared to BSF in pairwise testing and on worn cartilage surfaces. Injection of 2.8M TEG in rat or beagle knees gives comparable effects to treatment with saline, and does not cause significant synovitis.

Emulsion Microgel Particles as High-Performance Bio-Lubricants

Starch-based emulsion microgel particles with different starch (15 and 20 wt %) and oil contents (0-15 wt %) were synthesized, and their lubrication performance under physiological conditions was investigated. Emulsion microgels were subjected to skin mimicking or oral cavity mimicking conditions, i.e., smooth hydrophobic polydimethylsiloxane ball-on-disc tribological tests, in the absence or presence of salivary enzyme (α-amylase). In the absence of enzyme, emulsion microgel particles (30-60 vol % particle content) conserved the lubricating properties of emulsion droplets, providing considerably lower friction coefficients (μ ≤ 0.1) in the mixed lubrication regime compared to plain microgel particles (0 wt % oil). Upon addition of enzyme, the lubrication performance of emulsion microgel particles became strongly dependent on the particles' oil content. Microgel particles encapsulating 5-10 wt % oil showed a double plateau mixed lubrication regime having a lowest friction coefficient μ ∼ 0.03 and highest μ ∼ 0.1, the latter higher than with plain microgel particles. An oil content of 15 wt % was necessary for the microgel particles to lubricate similarly to the emulsion droplets, where both systems showed a normal mixed lubrication regime with μ ≤ 0.03. The observed trends in tribology, theoretical considerations, and the combined results of rheology, light scattering, and confocal fluorescence microscopy suggested that the mechanism behind the low friction coefficients was a synergistic enzyme- and shear-triggered release of the emulsion droplets, improving lubrication. The present work thus demonstrates experimentally and theoretically a novel biolubricant additive with stimuli-responsive properties capable of providing efficient boundary lubrication between soft polymeric surfaces. At the same time, the additive should provide an effective delivery vehicle for oil soluble ingredients in aqueous media. These findings demonstrate that emulsion microgel particles can be developed into multifunctional biolubricant additives for future use in numerous soft matter applications where both lubrication and controlled release of bioactives are essential.

Preparation and properties evaluation of biolubricants derived from canola oil and canola biodiesel

This study demonstrates the evaluation and comparison of the lubricity properties of the biolubricants prepared from the feed stocks such as canola oil and canola biodiesel. Biolubricant from canola biodiesel has a low cloud and pour point properties, better friction and antiwear properties, low phase transition temperature, is less viscous, and has the potential to substitute petroleum-based automotive lubricants. Biolubricant from canola oil has high thermal stability and is more viscous and more effective at higher temperature conditions. This study elucidates that both the biolubricants are attractive, renewable, and ecofriendly substitutes for the petroleum-based lubricants.

Synthesis, characterization, and evaluation of 10-undecenoic acid-based epithio derivatives as multifunctional additives

Novel epithio compounds from alkyl epoxy undecanoates (n-alkyl, C1, C4, and C6; isoalkyl, C3, C4, and C8) were synthesized using an ammonium thiocyanate in ionic liquid 1-methylimidazolium tetrafluoroborate/H2O (2:1) solvent system in 85-90% yields by gas chromatographic (GC) analysis. The synthesized products were characterized by (1)H and (13)C nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy (FTIR), gas chromatography, and GC mass spectral (GC-MS) analyses and evaluated for their antioxidant, extreme pressure (EP), and antiwear (AW) properties in three different base oils, namely, epoxy jatropha fatty acid n-butyl esters (EJB), di-2-ethylhexyl sebacate (DOS), and mineral oil (S-105). Among the synthesized products, n-butyl epithio undecanoate exhibited superior antioxidant property (229.2 °C) compared to butylated hydroxytoluene (BHT, 193.8 °C) in base oil DOS and comparable performance in EJB and S-105 base oils. All of the epithio derivatives exhibited significantly enhanced weld point for the base oils EJB and DOS at 2 wt % level and displayed moderate enhancement in S-105 base oil. Methyl epithio undecanoate at 0.6% concentration exhibited considerable improvement in the wear scar of DOS base oil. The synthesized epithio derivatives have potential as multifunctional additives in lubricant formulations.