Studies on sorption kinetics and sorption isotherm for pervaporative separation of benzene from model pyrolysis gasoline using insitu nano silver/polyvinyl alcohol membrane

Pyrolysis gasoline (Py gas) is used as an octane enhancer of gasoline as it is rich in aromatics. However, removal of carcinogenic benzene from Py gas before blending with gasoline is important to meet the fuel specifications. The main focus of this present study is to determine the sorption kinetics and sorption isotherm of a fabricated insitu nano silver/polyvinyl alcohol (insitu nano Ag/PVA) membrane for pervaporative separation of benzene from model Py gas [mixture of benzene (aromatic) and 1-octene (aliphatic)]. The thickness, surface morphological structure (Atomic Force Microscopy) and degree of swelling of the fabricated membrane were determined. The highest pervaporation separation index achieved for the selected system was 14.259 kg/m²/h at 303 K, with 30 volume% benzene in model Py gas using a downstream pressure of 1 mm of Hg. The sorption kinetics of benzene in insitu nano Ag/PVA membrane obeyed the Elovich model while the Temkin isotherm model fitted the experimental data of the chosen system most accurately.

Influence of Environmental Factors on the Swelling Capacities of Superabsorbent Polymers Used in Concrete

Superabsorbent polymers (SAP) are of major interest as materials to control the cement hydration process. The swelling behavior of the SAPs significantly influences the performance of the resulting concrete by slowly releasing polymer-bound water in order to maintain a consistent w/c value. A round-robin test conducted by the RILEM Technical Committee 260-RSC showed that the same batch of polymer can lead to large deviations in concrete performance and this was assumed to originate in different storage conditions of the SAP. In this contribution the change in the performance of two SAPs, a crosslinked poly(acrylate) and a crosslinked poly(acrylate-co-acrylamide), was assessed after ageing in standard climate, at 50 °C, and under UV irradiation. During storage in standard climate or 50 °C, ageing led to dehydration of the SAP, and this subsequently led to a higher water uptake during swelling. By contrast, UV irradiation reduced the water uptake, most likely as a result of photo-crosslinking. Dynamic water vapor sorption experiments indicated a strong dependence of the water uptake on both the ambient humidity and the temperature. As a result, cement mixtures containing SAP must be calculated on the dry mass of the SAP rather than the actual weight on site. A standard procedure of how to pack and handle SAP to be used in concrete is also provided.

Tuning the Hydrophobicity of a Hydrogel Using Self-Assembled Domains of Polymer Cross-Linkers

Hydrogels incorporated with hydrophobic motifs have received considerable attention to recapitulate the cellular microenvironments, specifically for the bio-mineralization of a 3D matrix. Introduction of hydrophobic molecules into a hydrogel often results in irregular arrangement of the motifs, and further phase separation of hydrophobic domains, but limited efforts have been made to resolve this challenge in developing the hydrophobically-modified hydrogel. Therefore, this study presents an advanced integrative strategy to incorporate hydrophobic domains regularly in a hydrogel using self-assembled domains formed with polymer cross-linkers, building blocks of a hydrogel. Self-assemblies formed by polymer cross-linkers were examined as micro-domains to incorporate hydrophobic motifs in a hydrogel. The self-assembled structures in a pre-gelled solution were confirmed with the fluorescence analysis and the hydrophobicity of a hydrogel could be tuned by incorporating the hydrophobic chains in a controlled manner. Overall, the results of this study would greatly serve to tuning performance of a wide array of hydrophobically-modified hydrogels in drug delivery, cell therapies and tissue engineering.

Transmucosal delivery of Docetaxel by mucoadhesive polymeric nanofibers

The aim of the present study is to design a mucoadhesive nano-carrier system which retains at the site of application and maximizes the therapeutic potential of anticancer drug as well as reduces their systemic side effects. In the present study PVA nanofibers of Docetaxel were prepared using electrospinning machine. The resulting nanofibers were characterized through various parameters such as surface morphology, drug loading, in-vitro drug release, tensile strength, mucoadhesiveness, drug permeability, degree of swelling and anticancer activities against selective cell lines to establish their therapeutics potential. On the basis of various evaluation results, we may conclude that the current approach comprising polymeric nanofibers can be successfully used for local delivery of anticancer drug.

Preparation and in vitro characterization of mucoadhesive hydroxypropyl guar microspheres containing amlodipine besylate for nasal administration

Amlodipine besylate microspheres for intranasal administration were prepared with an aim to avoid first-pass metabolism, to achieve controlled blood level profiles and to improve therapeutic efficacy. Hydroxypropyl Guar, a biodegradable polymer, was used in the preparation of microspheres by employing water in oil emulsification solvent evaporation technique. The formulation variables were drug concentration, emulsifier concentration, temperature, agitation speed and polymer concentration. All the formulations were evaluated for particle size, particle shape and surface morphology by scanning electron microscopy, percentage yield, drug entrapment efficiency, in vitro mucoadhesion test, degree of swelling and in vitro drug diffusion through sheep nasal mucosa. The microspheres obtained were free flowing, spherical and the particles ranged in size from 13.4±2.38 μm to 43.4±1.92 μm very much suitable for nasal delivery. Increasing polymer concentration resulted in increased drug entrapment efficiency and increased particle size. Amlodipine besylate was entrapped into the microspheres with an efficiency of 67.2±1.18 % to 81.8±0.64 %. The prepared microspheres showed good mucoadhesion properties, swellability and sustained the release of the drug over a period of 8 h. The data obtained were analysed by fitment into various kinetic models; it was observed that the drug release was matrix diffusion controlled and the release mechanism was found to be non-Fickian. Stability studies were carried out on selected formulations at 5±3°, 25±2°/60±5% RH and 40±2°/75±5% RH for 90 days. The drug content was observed to be within permissible limits and there were no significant deviations in the in vitro mucoadhesion and in vitro drug diffusion characteristics.

Influence of different organic solvents on degree of swelling of poly (dimethyl siloxane)-based sealer

The study evaluated the compatibility of chloroform, ether, and xylene with poly(dimethyl siloxane) (PDMS) based sealer. Freshly mixed sealer was placed in 90 glass molds with 5 mm diameter and 2 mm thickness. All samples were stored in 75% relative humidity at 37°C for 2 weeks. All the samples were divided into three groups: group A - chloroform; group B - ether, and group C - xylene and immersed in fresh solvent at room temperature. The specimens were weighed before and after immersion for each group at the end of 2, 5, and 10 min. The swelling ratio was calculated for all the groups. Intergroup comparison revealed no difference in the mean swelling ratio for 2, 5, and 10 min (P > 0.001; Tukey HSD Post Hoc). Intragroup comparison revealed significant difference in swelling ratio between 2 and 5 min for group B and group C (P < 0.001; Paired t test). Ether has the highest compatibility with PDMS-based sealer after 2 min followed by xylene after 5 min.