Water-Soluble Nanocomposites Containing Co3O4 Nanoparticles Incorporated in Poly-1-vinyl-1,2,4-triazole

New water-soluble nanocomposites with cobalt oxide nanoparticles (Co₃O₄NPs) in a poly(1-vinyl-1,2,4-triazole) (PVT) matrix have been synthesized. The PVT used as a stabilizing polymer matrix was obtained by radical polymerization of 1-vinyl-1,2,4-triazole (VT). The polymer nanocomposites with Co₃O₄ nanoparticles were characterized by ultraviolet-visible, Fourier-transform infrared spectroscopy, atomic absorption spectroscopy, transmission electron microscopy, dynamic light scattering, gel permeation chromatography, and simultaneous thermogravimetric analysis. The resulting polymer nanocomposites consist of spherical isolated cobalt nanoparticles with a diameter of 1 to 13 nm. The average hydrodynamic diameters of macromolecular coils are 15-112 nm. The cobalt content in nanocomposites ranges from 1.5 to 11.0 wt.%. The thermal stability of nanocomposites is up to 320 °C.

Hydrazine Hydrate-Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%-Efficient Sb2(S,Se)3 Planar Solar Cells

Antimony selenosulfide (Sb₂(S,Se)₃), a simple alloyed compound containing earth-abundant constituents, with a tunable bandgap and high absorption coefficient has attracted significant attention in high-efficiency photovoltaic applications. Optimizing interfacial defects and absorber layers to a high standard is essential in improving the efficiency of Sb₂(S,Se)₃ solar cells. In particular, the electron transport layer (ETL) greatly affects the final device performance of the superstrate structure. In this study, a simple and effective hydrazine hydrate (N₂H₄) solution post-treatment is proposed to modify CdS ETL in order to enhance Sb₂(S,Se)₃ solar cell efficiency. By this process, oxides and residual chlorides, caused by CdCl₂ treated CdS under a high temperature over 400 °C in air, are appropriately removed, rendering smoother and flatter CdS ETL as well as high-quality Sb₂(S,Se)₃ thin films. Furthermore, the interfacial energy band alignment and recombination loss are both improved, resulting in an as-fabricated FTO/CdS-N₂H₄/Sb₂(S,Se)₃/spiro-OMeTAD/Au solar cell with a high PCE of 10.30%, placing it in the top tier of Sb-based solar devices. This study provides a fresh perspective on interfacial optimization and promotes the future development of antimony chalcogenide-based planar solar cells.

Hydrazine Hydrate Induced Three-Dimensional Interconnected Porous Flower-like 3D-NiCo-SDBS-LDH Microspheres for High-Performance Supercapacitor

Porous structure and surface defects are important to improve the performance of supercapacitors. In this study, a facile pathway was developed for high-performance supercapacitors, which can produce transition metal hydroxides (LDHs) with abundant porous structure and surface defects. The NiCo-SDBS-LDH was prepared by one-step hydrothermal reaction using sodium dodecylbenzene sulfonate (SDBS) as anionic surfactant. And then, three dimensional (3D) interconnected porous flower-like 3D-NiCo-SDBS-LDH microspheres were designed and synthesized using the gas-phase hydrazine hydrate reduction method. Results showed that the hydrazine hydrate reduction not only introduces a large number of pores into 3D-NiCo-SDBS-LDH microspheres and causes the formation of oxygen vacancies, but it also roughens the surface of the microspheres. All these changes contribute to the enhancement of electrochemical activity of 3D-NiCo-SDBS-LDH; the NiCo-SDBS-LDH electrode after hydrazine hydrate treatment (3D-NiCo-SDBS-LDH) exhibits a higher specific capacitance of 1148 F·g^-1 at 1 A·g^-1 (about 1.46 times larger than that of NiCo-SDBS-LDH) and excellent long cycle life with 94% retention after 4000 cycles. Moreover, the assembled 3D-NiCo-SDBS-LDH//AC (active carbon) asymmetric supercapacitor (ASC) achieves remarkable energy density of 73.14 W h·kg^-1 at 800 W·kg^-1 and long-term cycling stability of 95.5% retention for up to 10,000 cycles. The outstanding electrochemical performance can be attributed to the synergy between the rich porous structure and the roughened surface that has been created by the hydrazine hydrate treatment.

A novel fluorescent probe with aggregation induced emission (AIE) effect based on 1,4-dihydropyridine and its applications

A fluorescent hydrazine hydrate probe (DMA) based on 1,4-dihydropyridine derivatives was designed and synthesized. The fluorescence emission peak of this probe is in the near-infrared region (667 nm), which has good selectivity to hydrazine hydrate and low detection limit (11 nM). Importantly, the probe exhibits aggregation-induced emission (AIE) characteristics. In addition, the probe is prepared with a portable test paper to realize the identification of hydrazine hydrate in the solution and the quantitative detection of hydrazine hydrate gas.

CO2 Conversion into N-Doped Porous Carbon-Encapsulated NiO/Ni Composite Nanomaterials as Outstanding Anode Material of Li Battery

N-doped porous carbon encapsulated NiO/Ni composite nanomaterials (N-doped NiO/Ni@C) was successfully obtained by a one-step solution combustion method. This study demonstrates a one-step combustion method to synthesize n-doped porous carbon encapsulated NiO/Ni composite nanomaterials, using carbon dioxide as the carbon source, nickel nitrate as the nickel source, and hydrazine hydrate as the reaction solution. Spherical NiO nanoparticles with a particle size of 20 nm were uniformly distributed in the carbon matrix. The load of NiO/Ni can be controlled by the amount of nickel nitrate. The range of carbon content of recovered samples is 69-87 at%. The content of incorporated nitrogen for recovered samples is 1.94 at%. As the anode of lithium ion battery, the composite material exhibits high capacity, excellent multiplier performance and stable circulation performance. N-doped NiO/Ni@C-2 was applied to lithium ion batteries, and its reversible capacity maximum is 980 mAh g^-1 after 100 cycles at the current density of 0.1 A g^-1. Its excellent electrochemical properties imply its high potential application for high-performance lithium-ion battery anode materials.

MOFs-Derived Nano-CuO Modified Electrode as a Sensor for Determination of Hydrazine Hydrate in Aqueous Medium

It very important to be able to efficiently detect hydrazine hydrate in an aqueous medium due to its high toxicity. Here, we have proposed a new idea: to construct a sensor for the rapid determination of hydrazine hydrate based on the nano-CuO derived by controlled pyrolysis of HKUST-1 [Cu3(BTC)2(H2O)3]. The as-prepared CuO at 400 °C possesses a uniform appearance with nano-structure via SEM images, and the nano-CuO-400 has exhibited excellent electrocatalytic activity towards hydrazine oxidation. Amperometric i-t curves shows the peak current as linearly proportional to the hydrazine concentration within 1.98-169.3 μmol L-1 and 232-2096 μmol L-1 with the detection limit of 2.55 × 10-8 mol L-1 and 7.01 × 10-8 mol L-1, respectively. Moreover, the sensor constructed in the experiment shows good selectivities, and it is feasible to determining actual water samples.

Isolated Iron Single-Atomic Site-Catalyzed Chemoselective Transfer Hydrogenation of Nitroarenes to Arylamines

Selective hydrogenation of nitroarenes to arylamines is a great challenge because of the complicated mechanism and competitive hydrogenation of reducible functional groups. Isolated single-atomic site catalysts, benefitting from their uniform and well-defined catalytic sites, are promising to achieve high activity and selectivity. Herein, we prepared an isolated iron single-atomic catalyst supported on ordered mesoporous nitrogen-doped carbon (Fe₁/N-C). The as-prepared Fe₁/N-C showed excellent activity and tolerance for functional groups in the transfer hydrogenation of nitroarenes over hydrazine hydrate. Density functional theory calculations revealed that the single atomically dispersed, partially positively charged Fe atoms and the lowered energy barrier collectively contribute to the superior hydrogenation performances for nitroarenes.

Nitrogen-Doped Carbon Materials for the Metal-Free Reduction of Nitro Compounds

In this study, nitrogen-doped carbon materials (labeled as NC-T) were easily prepared by thermal treatment of the melamine-chitosan composite. NC-T catalysts demonstrated good activity toward the reduction of nitro compounds by using hydrazine hydrate (N₂H₄·H₂O) as the reductant. The activity of NC-T enhanced with the rise of the pyrolysis temperature because of the enhanced ratio of graphitic-type nitrogen, which might be the active sites for the reduction of nitro compounds. NC-950 showed high activity for the selective reduction of nitro compounds in hexane to produce amines at yields from 87.5 to 100% at 90 °C using 2 equiv of N₂H₄·H₂O. The NC-950 catalyst demonstrated comparable or even higher catalytic activity in comparison with the reported metal catalysts. The hydrogenation of nitro compounds with N₂H₄·H₂O proceeded via the direct way involving hydroxylamine as the reaction intermediate.

Synthesis, Cytotoxicity, Antimicrobial and Docking Simulation of Novel Pyrazolo[3,4-d]pyrimidine and pyrazolo[4,3-e][1,2,4]triazolo[3,4-c] pyrimidine Derivatives

BACKGROUND

Isobutyrohydrazonoyl bromide 1 was used as a precursor for the synthesis of 4-imino-3-isopropyl-1-(4-nitrophenyl)-1,4-dihydro-5H-pyrazolo[3,4-d]pyrimidin-5-amine 4, which was converted into hydrazino derivative 5 by heating with hydrazine hydrate at reflux. Hydrazino, as well as imino-amino derivatives, underwent condensation and cyclization reactions to give pyrazolo[ 3,4-d]pyrimidine and pyrazolo[4,3-e][1,2,4]triazolo[3,4-c]pyrimidine derivatives, respectively.

METHOD

Antimicrobial studies are performed using two-gram positive bacteria and two-gram negative bacteria.

RESULTS

Data revealed that compound 9a is the most promising antibacterial agent with high efficiency (low MIC value (48 μg/ml)). The cytotoxic assay was investigated for in vitro antitumor screening against Caucasian breast adenocarcinoma MCF7, hepatocellular carcinoma HepG2 and colon carcinoma HCT-116 cell lines.

CONCLUSION

The results are compared with doxorubicin standard anticancer drugs as well as normal cell lines like MCF10 and MCF12. Molecular docking was carried out for the highest potent compound 8c with the binding site of dihydrofolate reductase enzyme DHFR PDB:ID (1DLS).

Synthesis and Nanostructures of Metal Selenide Precursors for Cu(In,Ga)Se2 Thin-Film Solar Cells

A nanoink solution-based process was developed as a low-costing method for the fabrication of Cu(In,Ga)Se2 (CIGSe) thin-film photovoltaic cells. The sonochemical synthesis of CIGSe nanocrystals of the nanoink through step-by-step mixing of the reactants was investigated. To achieve the ideal stoichiometry of Cu(In0.7 Ga0.3 )Se2 to tune the bandgap and to fabricate high-efficiency photovoltaic cells, the synthetic parameters, the concentration of hydrazine, and the amount used of the gallium precursor were investigated. As the hydrazine concentration increased, gallium loss was observed in the CIGSe product. The gallium content in the reactant mixture strongly affected the metal stoichiometry of the prepared CIGSe nanocrystals. The nanoink solution based fabrication of thin-film photovoltaic cells was also explored, and the resulting device showed a conversion efficiency of 5.17 %.

Selective Reduction of Halogenated Nitroarenes with Hydrazine Hydrate in the Presence of Pd/C

A large variety of halogenated nitroarenes have been selectively reduced with hydrazine hydrate in the presence of Pd/C to give the corresponding (halogenated) anilines in good yield.

Facile Synthesis of ZnO Nanorods by Microwave Irradiation of Zinc–Hydrazine Hydrate Complex

ZnO nanorods have been successfully synthesized by a simple microwave-assisted solution phase approach. Hydrazine hydrate has been used as a mineralizer instead of sodium hydroxide. XRD and FESEM have been used to characterize the product. The FESEM images show that the diameter of the nanorods fall in the range of about 25–75 nm and length in the range of 500–1,500 nm with an aspect ratio of about 20–50. UV–VIS and photoluminescence spectra of the nanorods in solution have been taken to study their optical properties. A mechanism for microwave synthesis of the ZnO nanorods using hydrazine hydrate precursor has also been proposed.

An efficient synthesis of pyrazolo[3,4-b]quinolin-3-amine and benzo[b][1,8]naphthyridine derivatives

2-Oxo-4-phenyl-1,2,5,6,7,8-hexahydroquinoline-3-carbonitrile (10) reacted with hydrazine hydrate, phenylisothiocyanate or benzoyl chloride to give derivatives 12, 13 and 15, respectively. The latter two products were treated with hydrazine hydrate to afford pyrozole[3,4-b]quinolines derivatives 14 and 16, respectively. Compound 10 also reacted with acetonitrile dimer or malononitrile dimer to yield benzo[b][1,8]-naphthyridine derivatives. A single crystal X-ray crystallographic analysis was performed on compound 10, confirming its structure.