Quantifying the Contribution of Hot Electrons in Photothermal Catalysis: A Case Study of Ammonia Synthesis over Carbon-supported Ru Catalyst

Photothermal catalysis is one of the most promising green catalytic technologies, while distinguishing the effects of hot electrons and local heating remains challenging. Herein, we reported that the actual reaction temperature of photothermal ammonia synthesis over carbon-supported Ru catalyst can be measured based on Le Chatelier's principle, enabling the hot-electron contribution to be quantified. By excluding local heating effects, we established that the activation energy via photothermal catalysis was much lower than that of thermocatalysis (54.9 vs. 126.0 kJ mol-1), stemming from hot-electron injection lowering the energy barriers for both N2 dissociation and intermediates hydrogenation. Furthermore, hot-electron injection acted to suppress carbon support methanation, giving the catalyst outstanding operational stability over 1000 h. This work provides new insights into the hot-electron effects in ammonia synthesis, guiding the design of high-performance photothermal catalysts.

Magnetic Heating Amorphous NiFe Hydroxide Nanosheets Encapsulated Ni Nanoparticles@Wood Carbon to Boost Oxygen Evolution Reaction Activity

The oxygen evolution reaction (OER) has significant effects on the water-splitting process and rechargeable metal-air batteries; however, the sluggish reaction kinetics caused by the four-electron transfer process for transition metal catalysts hinder large-scale commercialization in highly efficient electrochemical energy conversion devices. Herein, a magnetic heating-assisted enhancement design for low-cost carbonized wood with high OER activity is proposed, in which Ni nanoparticles are encapsulated in amorphous NiFe hydroxide nanosheets (a-NiFe@Ni-CW) via direct calcination and electroplating. The introduction of amorphous NiFe hydroxide nanosheets optimizes the electronic structure of a-NiFe@Ni-CW, accelerating electron transfer and reducing the energy barrier in the OER. More importantly, the Ni nanoparticles located on carbonized wood can function as magnetic heating centers under the effect of an alternating current (AC) magnetic field, further promoting the adsorption of reaction intermediates. Consequently, a-NiFe@Ni-CW demonstrated an overpotential of 268 mV at 100 mA cm^-2 for the OER under an AC magnetic field, which is superior to that of most reported transition metal catalysts. Starting with sustainable and abundant wood, this work provides a reference for highly effective and low-cost electrocatalyst design with the assistance of a magnetic field.

Resonances and antiresonances in heat generation by spin current in a quantum dot

We study the heat generation in a quantum dot exposed to a rotating magnetic field and coupled to a normal lead. Both electron-phonon interaction and electron-electron interaction are considered in the dot. We show the emergence of resonances and antiresonances in the heat generation, which we attribute to constructive interference and destructive interference between phonon waves emitted from opposite spin channels in the dot.

Modulation of Local Cellular Activities using a Photothermal Dye-Based Subcellular-Sized Heat Spot

Thermal engineering at the microscale, such as the regulation and precise evaluation of the temperature within cellular environments, is a major challenge for basic biological research and biomaterials development. We engineered a polymeric nanoparticle having a fluorescent temperature sensory dye and a photothermal dye embedded in the polymer matrix, named nanoheater-thermometer (nanoHT). When nanoHT is illuminated with a near-infrared laser at 808 nm, a subcellular-sized heat spot is generated in a live cell. Fluorescence thermometry allows the temperature increment to be read out concurrently at individual heat spots. Within a few seconds of an increase in temperature by approximately 11.4 °C from the base temperature (37 °C), we observed the death of HeLa cells. The cell death was observed to be triggered from the exact local heat spot at the subcellular level under the fluorescence microscope. Furthermore, we demonstrate the application of nanoHT for the induction of muscle contraction in C2C12 myotubes by heat release. We successfully showed heat-induced contraction to occur in a limited area of a single myotube based on the alteration of protein-protein interactions related to the contraction event. These results demonstrate that even a single heat spot provided by a photothermal material can be extremely effective in altering cellular functions.

Pristine carbon nanotubes are efficient absorbers at radio frequencies

Radio frequency ablation and microwave hyperthermia are powerful tools for destroying dysfunctional biological tissues. However, wireless application of these techniques is hindered by their inability to focus the electromagnetic energy to small targets. The use of locally injected radio frequency- or microwave-absorbing nanomaterials can help to overcome this challenge by confining heat production to the injected region. Previous theoretical work suggests that high-aspect-ratio conducting nanomaterials, such as carbon nanotubes, offer powerful radio frequency and microwave absorption. While carbon nanotubes have been demonstrated as radiothermal agents, common solubilization methods may reduce their absorption efficiency, yielding undesirable nonspecific heating in the biological tissue background. In this manuscript, we hypothesize that pristine carbon nanotubes can act as efficient absorbers at radio frequencies, thus providing differential heating over the tissue background. Specifically, we use a sonication-free preparation technique to preserve both the high aspect ratio and local concentration of pristine carbon nanotubes. We validate the differential heating of these samples by 4.5-fold at 2 GHz compared to the heating of saline at a physiological concentration using infrared thermography. In addition, we successfully achieved local heating of pristine carbon nanotubes within a three-dimensional biological tissue phantom. Numerical simulations further aid in producing a temperature map within the phantom and confirming localized heating. Due to their significant differential and local heating, we believe that pristine carbon nanotubes may facilitate region-specific radio frequency ablation and microwave hyperthermia while keeping nonspecific heating to a low level in the normal tissue background.

Reactive hyperemia augments local heat-induced skin hyperemia

NEW FINDINGS

What is the central question of this study? It is valuable to be able to monitor disease or treatment related changes in the microcirculation. Laser doppler flowmetry with local heating allows noninvasive monitoring of the skin microcirculation and its ability to vasodilate. Does reactive hyperemia augment the increase in skin blood flow elicited by local heating? What is the main finding and its importance? The results of this study show that the addition of reactive hyperemia to local heating results in greater vasodilation than heating alone. Thus, reactive hyperemia can augment local heat-induced hyperemia in the skin.

ABSTRACT

The skin circulation has been proposed as a model of generalized microvascular function which could be monitored noninvasively using laser doppler flowmetry (LDF). The response to heat hyperemia (HH) is commonly used to monitor disease or treatment related changes in microvascular function. We hypothesized that reactive hyperemia would augment the increase in skin blood flow elicited by local heating. Fourteen healthy young adults were subjected to 3 different conditions: reactive hyperemia (RH; skin temperature controlled at 33°C), heat hyperemia (HH; 42°C held for 40 minutes), and HH+RH. Two Peltier-controlled thermomodules with laser LDF probes were placed on the right forearm to continuously monitor skin blood flow. A cuff was placed on the right upper arm to elicit RH by inflation to 220 mmHg for 5 minutes. This procedure was performed with skin temperature at 33°C and again after 40 min of local heating to 42°C. Beat-by-beat mean arterial pressure (MAP) obtained by a photoplethysmographic sensor on the middle finger of the left hand allowed calculation of cutaneous vascular conductance (CVC) as LDF / MAP. Both HH and RH increased LDF (p<0.0001 and p <0.0001, respectively) and CVC (p = 0.0001 and p<0.0001) above baseline values. LDF and CVC values were significantly higher during HH+RH when compared to RH or HH alone (p<0.0001). In summary, HH+RH resulted in greater vasodilation when compared to HH or RH alone. These results indicate that RH can augment local heat-induced hyperemia in the skin. This article is protected by copyright. All rights reserved.

Low-frequency oscillations of murine skin microcirculations and periodic changes of [Ca2+ ]i and [NO]i levels in murine endotheliocytes: An effect of provocative tests

The five frequency intervals of skin blood oscillation were described: cardiac, respiratory, myogenic, neurogenic, and endothelial. The endothelial interval is derived into NO-independent and NO-dependent. The exact molecular, cell, or systemic mechanisms of endothelial oscillations generation are unclear. We proposed that oscillations of Ca²⁺ and NO in endotheliocytes may be possible sources of skin blood perfusion (SBP) oscillations in endothelial interval. To examine our hypothesis we compared the oscillations of cytoplasmic Ca²⁺ and NO ([Ca²⁺ ]_i and [NO]_i ) concentration in cultured murine microvascular endotheliocytes and SBP oscillations in mice. Local heating test and model hypoxia were used as tools to evaluate an interconnection of studied parameters. [Ca²⁺ ]_i and [NO]_i were measured simultaneously by Fura-2 AM and DAF-FM. The SBP was measured by laser Doppler flowmetry. The [Ca²⁺ ]_i and [NO]_i oscillations at 0.005-0.01 Hz were observed in endotheliocytes, that coincides the ranges of NO-independent endothelial interval. Heating decreased amplitude of [Ca²⁺ ]_i and [NO]_i oscillations in cells in NO-independent endothelial interval, while amplitudes of SBP oscillations increased in NO-independent and NO-dependent intervals. Hypoxia reduced the [NO]_i oscillations amplitude. Heating test during hypoxia increased NO-independent endothelial SBP oscillations and decreased myogenic ones, did not effect on [NO]_i oscillations, and shifted [Ca²⁺ ]_i oscillations peak from 0.005-0.01 Hz to 0.01-0.018 Hz. We observed the [Ca²⁺ ]_i and [NO]_i oscillations synchronization within a cell and between cells for the first time. Heating abolished these synchronizations. Therefore low-frequency [Ca²⁺ ]_i and [NO]_i oscillations in endotheliocytes may be considered as modulators of low-frequency endothelial SBP oscillations.

Effect of local heat application during exercise on gene expression related to mitochondrial homeostasis

The aim of this study was to determine the impact of local muscle heating during endurance exercise on human skeletal muscle mitochondrial-related gene expression. Twelve subjects (25 ± 6 yr, 177 ± 8 cm, 78 ± 16 kg, and peak aerobic capacity 45 ± 8 mL·kg-1·min-1) cycled with one leg heated (HOT) and the other serving as a control (CON). Skin and intramuscular temperatures were taken before temperature intervention (Pre), after 30 minutes (Pre30), after exercise (Post) and four hours after exercise (4Post). Muscle biopsies were taken from each leg at Pre and 4Post. Intramuscular temperature increased within HOT (34.4 ± 0.7 °C to 36.1 ± 0.5 °C, p < 0.001) and was higher than CON at Pre30 (34.0 ± 0.7 °C, p < 0.001). However, temperatures at POST were similar (HOT 38.4 ± 0.7 °C, CON 38.3 ± 0.5 °C, p = 0.661). Skin temperature was higher than CON at Post30 (30.3 ± 1.0 °C, p < 0.001) and Post (HOT 34.6 ± 0.9 °C, CON 32.3 ± 1.6 °C, p < 0.001). PGC-1α, VEGF and NRF2 mRNA increased with exercise (p < 0.05) but was not altered with heating (p > 0.05). TFAM increased after exercise with heat application (HOT, p = 0.019) but not with exercise alone (CON, p = 0.422). There was no difference in NRF1, ESRRα, or any of the mitophagy related genes in response to exercise or temperature (p > 0.05). In conclusion, TFAM is enhanced by local heat application during endurance exercise, whereas other genes related to mitochondrial homeostasis are unaffected. Novelty: The main finding of this study is that localized heating increased TFAM mRNA expression. The normal exercise-induced increased PGC-1α gene expression was unaltered by local muscle heating.

Nanoparticle Delivery in Prostate Tumors Implanted in Mice Facilitated by Either Local or Whole-Body Heating

This work discusses in vivo experiments that were performed to evaluate whether local or whole-body heating to 40 °C reduced interstitial fluid pressures (IFPs) and enhanced nanoparticle delivery to subcutaneous PC3 human prostate cancer xenograft tumors in mice. After heating, 0.2 mL of a previously developed nanofluid containing gold nanoparticles (10 mg Au/mL) was injected via the tail vein. The induced whole-body hyperthermia led to increases in tumor and mouse body blood perfusion rates of more than 50% and 25%, respectively, while the increases were much smaller in the local heating group. In the whole-body hyperthermia groups, the IFP reduction from the baseline at the tumor center immediately after heating was found to be statistically significant when compared to the control group. The 1 h of local heating group showed IFP reductions at the tumor center, while the IFPs increased in the periphery of the tumor. The intratumoral gold nanoparticle accumulation was quantified using inductively coupled plasma mass spectrometry (ICP-MS). Compared to the control group, 1 h or 4 h of experiencing whole-body hyperthermia resulted in an average increase of 51% or 67% in the gold deposition in tumors, respectively. In the 1 h of local heating group, the increase in the gold deposition was 34%. Our results suggest that 1 h of mild whole-body hyperthermia may be a cost-effective and readily implementable strategy for facilitating nanoparticle delivery to PC3 tumors in mice.

221 K Local Photothermal Heating in a Si Plasmonic Waveguide Loaded with a Co Thin Film

Photothermal heaters are important devices for optical switches and memories based on the thermo-optic/magneto-optic effect and phase change materials. We demonstrated photothermal heating in Si plasmonic waveguides loaded with Co thin films by measuring the resistance change upon inputting transverse-magnetic (TM) mode light. Temperature rise is proportional to the light intensity with clear polarization dependence. The photothermal conversion efficiency was estimated at 36 K/mW and maximum temperature rise was estimated at 221 K at steady state upon the inputting 6.3 mW TM mode light for the 400 nm-wide, 8 µm-long and 189 nm-thick Co film deposited on the Si wire waveguide with 129 nm-thick SiO₂ buffer layer. The method to increase the efficiency is discussed based on the experimental and simulation results considering the thickness of the SiO₂ buffer layer, Co layer and Si core layer, waveguide width, and wavelength. Local photothermal heaters in this study can be applied to a variety of fields including optical switches/memories without electrical control signals in photonic integrated circuits, on-chip optical sensors, and a lab-on-a-chip in biology, chemistry, and medicine.

Delayed window of improvements in skin microvascular function following a single bout of remote ischaemic preconditioning

NEW FINDINGS

What is the central question of this study? Animal infarct studies indicate a delayed window of cardiac protection after remote ischaemic preconditioning (RIPC); however, the presence and duration of this delayed effect have not been examined in human microvasculature in vivo. What is the main finding and its importance? Cutaneous vasodilatation induced by local heating or ACh was increased significantly 24 and 48 h after a single bout of RIPC, respectively. Neither response persisted beyond ∼48 h. Sodium nitroprusside-induced cutaneous vasodilatation was not altered. These findings reveal a delayed increase in microvascular endothelial function after a single bout of RIPC.

ABSTRACT

Remote ischaemic preconditioning (RIPC) induces protective effects from ischaemia-reperfusion injury. In the myocardium and conduit vasculature, a single bout of RIPC confers delayed protection that begins 24 h afterwards and lasts for 2-3 days. However, the extent and the time line in which a single bout of RIPC affects the human microvasculature are unclear. We hypothesized that a single bout of RIPC results in a delayed increase in skin microvascular function. Sixteen healthy participants (age, 23 ± 4 years; seven males, nine females; MAP, 82 ± 7 mmHg) were recruited to measure cutaneous microvascular function immediately before a single bout of RIPC and 24, 48 and 72 h and 1 week after the bout. The RIPC consisted of four repetitions of 5 min of arm blood flow occlusion interspersed by 5 min reperfusion. Skin blood flow responses to local heating (local temperature of 42°C), ACh and sodium nitroprusside were measured by laser speckle contrast imaging and expressed as the cutaneous vascular conductance (CVC; in perfusion units per millimetre of mercury). Vasodilatation in response to local heating was increased 24 and 48 h after RIPC (ΔCVC, 1.05 ± 0.07 vs. 1.18 ± 0.07 and 1.24 ± 0.08 PU mmHg^-1 , pre- vs. 24 and 48 h post-RIPC; P < 0.05). Acetylcholine-induced cutaneous vasodilatation increased significantly 48 h after RIPC (ΔCVC, 0.71 ± 0.07 vs. 0.93 ± 0.12 PU mmHg^-1 , pre- vs. 48 h post-RIPC; P < 0.05) and returned to baseline thereafter. Sodium nitroprusside-mediated vasodilatation did not change. Thus, a single bout of RIPC elicited a delayed response in the microvasculature, resulting in an improvement in the endothelium-dependent cutaneous vasodilatory response that peaked ∼48 h post-RIPC.

Femtosecond Laser Pulse Excitation of DNA-Labeled Gold Nanoparticles: Establishing a Quantitative Local Nanothermometer for Biological Applications

Femtosecond (fs) laser pulsed excitation of plasmonic nanoparticle (NP)-biomolecule conjugates is a promising method to locally heat biological materials. Studies have demonstrated that fs pulses of light can modulate the activity of DNA or proteins when attached to plasmonic NPs; however, the precision over subsequent biological function remains largely undetermined. Specifically, the temperature the localized biomolecules "experience" remains unknown. We used 55 nm gold nanoparticles (AuNPs) displaying double-stranded (ds) DNA to examine how, for dsDNA with different melting temperatures, the laser pulse energy fluence and bulk solution temperature affect the rate of local DNA denaturation. A universal "template" single-stranded DNA was attached to the AuNP surface, and three dye-labeled probe strands, distinct in length and melting temperature, were hybridized to it creating three individual dsDNA-AuNP bioconjugates. The dye-labeled probe strands were used to quantify the rate and amount of DNA release after a given number of light pulses, which was then correlated to the dsDNA denaturation temperature, resulting in a quantitative nanothermometer. The localized DNA denaturation rate could be modulated by more than threefold over the biologically relevant range of 8-53 °C by varying pulse energy fluence, DNA melting temperature, and surrounding bath temperature. With a modified dissociation equation tailored for this system, a "sensed" temperature parameter was extracted and compared to simulated AuNP temperature profiles. Determining actual biological responses in such systems can allow researchers to design precision nanoscale photothermal heating sources.

Improved endothelial-dependent and endothelial-independent skin vasodilator responses following remote ischemic preconditioning

One week of daily remote ischemic preconditioning (RIPC) improves cutaneous vasodilatory (VD) function. However, the underlying mechanisms and the number of sessions needed to optimize this adaptive response remain unclear. We hypothesized that the responses to localized heating of the skin will be greater after 2 wk as opposed to 1 wk of RIPC. Furthermore, 2 wk of repeated RIPC will augment cutaneous VD responses to thermal and pharmacological stimuli. In methods, twenty-four participants (24 ± 2 yr; 13 men, 11 women) performed repeated RIPC (7 daily sessions over 1 wk, n = 11; 12 sessions over 2 wk, n = 13), consisting of four repetitions of 5 min of arm blood flow occlusion separated by 5 min reperfusion. Laser speckle contrast imaging was used to measure skin blood flow responses, in perfusion units (PU), to local heating (T_loc = 42°C), acetylcholine (ACh), and sodium nitroprusside (SNP) before and after repeated RIPC. Data were expressed as cutaneous vascular conductance (CVC, in PU/mmHg). In results, the VD response to local heating increased after RIPC (∆CVC from baseline; 1 wk: 0.94 ± 0.11 to 1.19 ± 0.15, 2 wk: 1.18 ± 0.07 to 1.33 ± 0.10 PU/mmHg; P < 0.05) but the ∆CVC did not differ between weeks. SNP-induced VD increased after 2 wk of RIPC (∆CVC; 0.34 ± 0.07 to 0.63 ± 0.11 PU/mmHg; P < 0.05), but ACh-induced VD did not. In conclusion, repeated RIPC improves local heating- and SNP-mediated cutaneous VD. When compared with 1 wk of RIPC, 2 wk of RIPC does not induce further improvements in cutaneous VD function.NEW & NOTEWORTHY Repeated RIPC increases the cutaneous vasodilatory response to local heating and to sodium nitroprusside but not to acetylcholine. Thus, endothelial-independent and local heating-mediated cutaneous vasodilation are improved following RIPC. However, 2 wk of RIPC sessions are not more effective than 1 wk of RIPC sessions in enhancing local heating-mediated cutaneous vasodilation.

Millimeter-Wave Heating in In Vitro Studies: Effect of Convection in Continuous and Pulse-Modulated Regimes

Shallow penetration of millimeter waves (MMW) and non-uniform illumination in in vitro experiments result in a non-uniform distribution of the specific absorption rate (SAR). These SAR gradients trigger convective currents in liquids affecting transient and steady-state temperature distributions. We analyzed the effect of convection on temperature dynamics during MMW exposure in continuous-wave (CW) and pulsed-wave (PW) amplitude-modulated regimes using micro-thermocouples. Temperature rise kinetics are characterized by the occurrence of a temperature peak that shifts to shorter times as the SAR of the MMW exposure increases and precedes initiation of convection in bulk. Furthermore, we demonstrate that the liquid volume impacts convection. Increasing the volume results in earlier triggering of convection and in a greater cooling rate after the end of the exposure. In PW regimes, convection strongly depends on the pulse duration that affects the heat pulse amplitude and cooling rate. The latter results in a change of the average temperature in PW regime. Bioelectromagnetics. 2019;40:553-568. © 2019 Bioelectromagnetics Society.

Through-Process Finite Element Modeling for Warm Flanging Process of Large-Diameter Aluminum Alloy Shell of Gas Insulated (Metal-Enclosed) Switchgear

The large diameter metal shell component (LDMSC) is an important part of gas insulated (metal-enclosed) switchgear (GIS). The LDMSC with multi branches is filled with gas under certain pressure. The plastic forming process is an efficient approach to manufacturing the high reliability LDMSC. The warm flanging process has been widely used to form LDMSC using aluminum alloy. The forming process is characterized by local heating, and the distribution of temperature is strongly inhomogeneous. Although the wall thickness of the shell is 10 mm to 20 mm, the ratio of outer diameter to thickness is more than 40. These present some difficulties in the flanging process and result in some forming defects. Detailed forming characteristics are hard to obtain by analytical and experimental methods. Thus, the through-process finite element (FE) modeling considering heating, forming, unloading, and cooling is one of the key problems to research the manufacturing process of LDMSC. In this study, the through-process FE modeling of the warm flanging process of LDMSC using aluminum alloy was carried out based on the FORGE. The thermo-mechanical coupled finite element method was adopted in the modeling, and the deformation of the workpiece and the die stress were considered together in the modeling. A full three-dimensional (3D) geometry was modeled due to inhomogeneous distribution in all directions for the temperature field. The simulation data of local flame heating could be transferred seamlessly to the simulations of the deforming process, the unloading process, and the cooling process in the through-process FE model. The model was validated by comparison with geometric shapes and forming defects obtained from the experiment. The developed FE model could describe the inhomogeneous temperature field along circumferential, radial, and axial directions for the formed branch as well as the deformation characteristic and the unloading behavior during the warm flanging process. By using the FE model, the forming defects during the flanging process and their controlling characteristics were explored, the evolution of the temperature field through the whole process was studied, and deformation and springback characteristics were analyzed. The results of this study provide a basis for investigating deformation mechanisms, optimizing processes, and determining parameters in the warm flanging process of a large-diameter aluminum alloy shell component.

The reliability of cutaneous low-frequency oscillations in young healthy males

OBJECTIVE

Spectral analyses of laser-Doppler flowmetry measures enable a simple and non-invasive method to investigate mechanisms regulating skin blood flow. We assessed within-day and day-to-day variability of cutaneous spectral analyses.

METHODS

Eleven young, healthy males were tested twice in three identical sessions, with 19 to 24 days between visits, for a total of six tests. Wavelet data were analyzed at rest, in response to local skin heating to 42 and 44°C, and during 5-minutes PORH. We did this for six frequency bands commonly associated with physiological functions. To assess reliability, we calculated CV and ICC scores.

RESULTS

At rest, mean CV for the wavelet data ranged from 21% to 24% and ICC scores ranged from 0.67 to 0.91. During local heating, mean CV scores ranged from 17% to 22% and mean ICC scores ranged from 0.71 to 0.95. For peak PORH, CV ranged from 14% to 23% and the ICC range was 0.88 to 0.97. For the area under the curve of the PORH, CV range was 12% to 21% and ICC range was 0.81 to 0.92.

CONCLUSIONS

These analyses indicate good-to-excellent reliability of the wavelet data in healthy young males.

Seven consecutive days of remote ischaemic preconditioning improves cutaneous vasodilatory capacity in young adults

KEY POINTS

Remote ischaemic preconditioning (RIPC), induced by brief bouts of ischaemia followed by reperfusion, confers vascular adaptations that protect against subsequent bouts of ischaemia; however, the effect of RIPC repeated over several days on the human microcirculation is unknown. Using skin as a model, microvascular function was assessed at a control and a NO-inhibited area of skin before 1 day after and 1 week after administering seven consecutive days of repeated RIPC on the contralateral arm. Maximal vasodilatation was increased by ∼20-50% following 7 days of repeated RIPC, and this response remained elevated 1 week after stopping RIPC; however, NO-mediated vasodilatation was not affected by the RIPC stimulus. These data indicate that repeated RIPC augments maximal vasodilatation, but the underlying mechanism for this improvement is largely independent of NO. This finding suggests a role for other endothelium-derived mediators and/or for endothelium-independent adaptations with repeated RIPC.

ABSTRACT

Remote ischaemic preconditioning (RIPC), induced by intermittent periods of ischaemia followed by reperfusion, confers cardiovascular protection from subsequent ischaemic bouts. RIPC increases conduit and resistance vessel function; however, the effect of RIPC on the microvasculature remains unclear. Using human skin as a microvascular model, we hypothesized that cutaneous vasodilatory (VD) function elicited by localized heating would be increased following repeated RIPC. Ten participants (23 ± 1 years, 6 males, 4 females) performed RIPC for seven consecutive days. Each daily RIPC session consisted of 4 repetitions of 5 min of arm blood flow occlusion interspersed by 5 min reperfusion. Before, 1 day after and 1 week after the 7 days of RIPC, two microdialysis fibres were placed in ventral forearm skin for continuous infusion of Ringer solution or 20 mM l-NAME. Red blood cell flux was measured by laser Doppler flowmetry at each fibre site during local heating (T_loc  = 39°C) and during maximal VD elicited by heating (T_loc  = 43°C) and 28 mM sodium nitroprusside infusion. Data were normalized to cutaneous vascular conductance (flux/mmHg). Seven days of RIPC did not alter the nitric oxide (NO) contribution to the VD response to local heating (P > 0.05). However, the maximal VD was augmented (Pre: 2.5 ± 0.2, Post: 3.8 ± 0.5 flux/mmHg; P < 0.05) and remained elevated 1 week post RIPC (3.3 ± 0.4 flux/mmHg; P < 0.05). Repeated RIPC improves maximal VD but does not affect NO-mediated VD in the cutaneous microvasculature. This finding suggests that other factors may explain the vasodilatory adaptations that occur following repeated RIPC.

Sex differences in the mechanisms mediating blunted cutaneous microvascular function in young black men and women

The black population exhibits attenuated vasodilatory function across their lifespan, yet little is known regarding the mechanisms of this impairment. Recent evidence suggests a potential role for oxidative stress. Therefore, we tested the hypothesis that NADPH oxidase (NOX) and/or xanthine oxidase (XO) contribute to blunted nitric oxide (NO)-mediated cutaneous microvascular function in young black adults. In 30 white and black subjects (8 men and 7 women in each group), local heating was performed while NOX and XO were inhibited by apocynin and allopurinol, respectively, via intradermal microdialysis. The plateau in cutaneous vascular conductance (red blood cell flux/mean arterial pressure) during 39°C local heating at each site was compared with a control site perfused with lactated Ringer solution. Subsequent inhibition of NO synthase via N^ω-nitro-l-arginine methyl ester allowed for quantification of the NO contribution to vasodilation during heating. Black individuals, relative to white individuals, had a blunted cutaneous vascular conductance plateau at the control site (45 ± 9 vs. 68 ± 13%max, P < 0.001) that was increased by both apocynin (61 ± 15%max, P < 0.001) and allopurinol (58 ± 17%max, P = 0.005). Black men and black women had similar responses to heating at the control site ( P = 0.99), yet apocynin and allopurinol increased this response only in black men (both P < 0.001 vs. control). The NO contribution was also increased via apocynin and allopurinol exclusively in black men. These findings suggest that cutaneous microvascular function is reduced because of NOX and XO activity in black men but not black women, identifying a novel sex difference in the mechanisms that contribute to blunted vascular responses in the black population. NEW & NOTEWORTHY We demonstrate that cutaneous microvascular responses to local heating are consistently reduced in otherwise healthy young black men and women relative to their white counterparts. Inhibition of NADPH oxidase and xanthine oxidase via apocynin and allopurinol, respectively, augments microvascular function in black men but not black women. These data reveal clear sex differences in the mechanisms underlying the racial disparity in cutaneous microvascular function.

Controlled Generation of Quantized Vortex-Antivortex Pairs in a Superconducting Condensate

Quantized vortices, as topological defects, play an important role in both physics and technological applications of superconductors. Normally, the nucleation of vortices requires the presence of a high magnetic field or current density, which allow the vortices to enter from the sample boundaries. At the same time, the controllable generation of individual vortices inside a superconductor is still challenging. Here, we report the controllable creation of single quantum vortices and antivortices at any desirable position inside a superconductor. We exploit the local heating effect of a scanning tunneling microscope (STM) tip: superconductivity is locally suppressed by the tip and vortex-antivortex pairs are generated when supercurrent flows around the hot spot. The experimental results are well-explained by theoretical simulations within the Ginzburg-Landau approach.

Microscale temperature and SAR measurements in cell monolayer models exposed to millimeter waves

Due to shallow penetration of millimeter waves (MMW) and convection in liquid medium surrounding cells, the problem of accurate assessment of local MMW heating in in vitro experiments remains unsolved. Conventional dosimetric MMW techniques, such as infrared imaging or fiber optic (FO) sensors, face several inherent limits. Here we propose a methodology for accurate local temperature measurement and subsequent specific absorption rate (SAR) retrieval using microscale thermocouples (TC). SAR was retrieved by fitting the measured initial temperature rise to the numerical solution of an equivalent thermal model. It was found that the accuracy of temperature measurement depends on thermosensor size, that is, the smaller TC, the more accurate the temperature measurement. SAR determined using TC with lead diameters of 25 and 75 μm demonstrated 98.5% and 80.4% match with computed SAR, respectively. However, both TC provided the same temperature rises in long run (> 10 min). FO probe failed to measure adequately local heating both for short and long exposures due to the relatively large size of the probe sensor (400 μm) and time constant (0.6 s). Calculated SAR in the cell monolayer was almost two times lower than that in the surrounding liquid. It was shown that the impact of the cell monolayer on heating due to its small thickness (5 to 10 μm) can be considered as negligible. Moreover, we demonstrated the possibility of accurate measurement of MMW-induced thermal pulses (up to 10 °C) using 25 μm TC. Bioelectromagnetics. 38:11-21, 2017. © 2016 Wiley Periodicals, Inc.

NEXAFS study of electronic and atomic structure of active layer in Al/indium tin oxide/TiO2 stack during resistive switching

We have studied the stability of the resistive switching process in the Al/(In2O3)0.9(SnO2)0.1/TiO2 assembly grown by atomic layer deposition. Besides electrical characterization the effect of electric field on the atomic electronic structure of the TiO2 layer was studied using near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The region of the current instability in the I-V characteristics was revealed. Presumably this current instability is supported by the amorphous structure of the TiO2 film but is initiated by the surface morphology of the Al substrate. A formation of the O2 molecules was established which occurs specifically in the region of the current instability that is a result of electrical Joule heating manifestation.

Nanoscale thermal phenomena in the vicinity of magnetic nanoparticles in alternating magnetic fields

Magnetic nanoparticles can be made to dissipate heat to their immediate surroundings in response to an applied alternating magnetic field. This property, combined with the biocompatibility of iron oxide nanoparticles and the ability of magnetic fields to penetrate deep in the body, makes magnetic nanoparticles attractive in a range of biomedical applications where thermal energy is used either directly to achieve a therapeutic effect or indirectly to actuate the release of a therapeutic agent. Although the concept of bulk heating of fluids and tissues using energy dissipated by magnetic nanoparticles has been well accepted and applied for several decades, many new and exciting biomedical applications of magnetic nanoparticles take advantage of heat effects that are confined to the immediate nanoscale vicinity of the nanoparticles. Until recently the existence of these nanoscale thermal phenomena had remained controversial. In this short review we summarize some of the recent developments in this field and emerging applications for nanoscale thermal phenomena in the vicinity of magnetic nanoparticles in alternating magnetic fields.

Regional differences of vasodilatation and vasomotion response to local heating in human cutaneous microcirculation

BACKGROUND

The aim of this study was to evaluate the vasodilatation and vasomotion response to local heating in the cutaneous microcirculation of the ankle, dorsum of foot and forearm. Recently, it has been suggested that this response differs between the forearm and the leg.

PROBANDS AND METHODS

Twenty-nine young healthy adults were recruited. They underwent measurement by laser Doppler flowmetry (LDF) in three sites of the body (ankle, dorsum of foot, forearm). Percentage change of the median flow of the skin before and after provocation and normalised perfusion flow to maximal dilation (cutaneous vascular conductance--CVC % Max) during short provocation test were monitored. Spectral analysis of laser Doppler flowmetry signals was performed using the fast Fourier transform algorithm.

RESULTS

Significant differences were found in CVC % Max between ankle/dorsum (45.18±6.38% Max vs. 51.24±6.87% Max, respectively; p<0.05) and between ankle/forearm (45.18±6.38% Max vs. 54.49±5.37% Max, respectively; p<0.05). Percentage change of flux after provocation has revealed significant differences between ankle/dorsum (394.1±204.5% vs. 577.4±273.5%, respectively; p<0.05) and ankle/forearm (394.1±204.5% vs. 637.1±324.7%, respectively; p<0.05). Total spectral activity of vasomotion has differed between ankle/dorsum and ankle/forearm: 69.59 [49.58-96.04] vs. 93.01 [73.15-121.8] (p<0.05) and 69.59 [49.58-96.04] vs. 107.5 [80.55-155.8] (p<0.05), respectively.

CONCLUSIONS

Cutaneous microcirculation exhibits regional differences. Significant variability of function between ankle and dorsum of foot suggests that leg microcirculation is not uniform.

Local heat activation of single myosins based on optical trapping of gold nanoparticles

Myosin is a mechano-enzyme that hydrolyzes ATP in order to move unidirectionally along actin filaments. Here we show by single molecule imaging that myosin V motion can be activated by local heat. We constructed a dark-field microscopy that included optical tweezers to monitor 80 nm gold nanoparticles (GNP) bound to single myosin V molecules with nanometer and submillisecond accuracy. We observed 34 nm processive steps along actin filaments like those seen when using 200 nm polystyrene beads (PB) but dwell times (ATPase activity) that were 4.5 times faster. Further, by using DNA nanotechnology (DNA origami) and myosin V as a nanometric thermometer, the temperature gradient surrounding optically trapped GNP could be estimated with nanometer accuracy. We propose our single molecule measurement system should advance quantitative analysis of the thermal control of biological and artificial systems like nanoscale thermal ratchet motors.

Effect of skin temperature on cutaneous vasodilator response to the β-adrenergic agonist isoproterenol

The vascular response to local skin cooling is dependent in part on a cold-induced translocation of α2C-receptors and an increased α-adrenoreceptor function. To discover whether β-adrenergic function might contribute, we examined whether β-receptor sensitivity to the β-agonist isoproterenol was affected by local skin temperature. In seven healthy volunteers, skin blood flow was measured from the forearm by laser-Doppler flowmetry and blood pressure was measured by finger photoplethysmography. Data were expressed as cutaneous vascular conductance (CVC; laser-Doppler flux/mean arterial blood pressure). Pharmacological agents were administered via intradermal microdialysis. We prepared four skin sites: one site was maintained at a thermoneutral temperature of 34°C (32 ± 10%CVCmax) one site was heated to 39°C (38 ± 11%CVCmax); and two sites were cooled, one to 29°C (22 ± 7%CVCmax) and the other 24°C (16 ± 4%CVCmax). After 20 min at these temperatures to allow stabilization of skin blood flow, isoproterenol was perfused in concentrations of 10, 30, 100, and 300 μM. Each concentration was perfused for 15 min. Relative to the CVC responses to isoproterenol at the thermoneutral skin temperature (34°C) (+21 ± 10%max), low skin temperatures reduced (at 29°C) (+17 ± 6%max) or abolished (at 24°C) (+1 ± 5%max) the vasodilator response, and warm (39°C) skin temperatures enhanced the vasodilator response (+40 ± 9%max) to isoproterenol. These data indicate that β-adrenergic function was influenced by local skin temperature. This finding raises the possibility that a part of the vasoconstrictor response to direct skin cooling could include reduced background β-receptor mediated vasodilation.

Assessing complexity of skin blood flow oscillations in response to locally applied heating and pressure in rats: implications for pressure ulcer risk

The objective of this study was to investigate the effects of local heating on complexity of skin blood flow oscillations (BFO) under prolonged surface pressure in rats. Eleven Sprague-Dawley rats were studied: 7 rats underwent surface pressure with local heating (Δt = 10 °C) and 4 rats underwent pressure without heating. A pressure of 700 mmHg was applied to the right trochanter area of rats for 3 h. Skin blood flow was measured using laser Doppler flowmetry. The loading period was divided into nonoverlapping 30 min epochs. For each epoch, multifractal detrended fluctuation analysis (MDFA) was utilized to compute DFA coefficients and complexity of endothelia related metabolic, neurogenic, and myogenic frequencies of BFO. The results showed that under surface pressure, local heating led to a significant decrease in DFA coefficients of myogenic frequency during the initial epoch of loading period, a sustained decrease in complexity of myogenic frequency, and a significantly higher degree of complexity of metabolic frequency during the later phase of loading period. Surrogate tests showed that the reduction in complexity of myogenic frequency was associated with a loss of nonlinearity whereas increased complexity of metabolic frequency was associated with enhanced nonlinearity. Our results indicate that increased metabolic activity and decreased myogenic response due to local heating manifest themselves not only in magnitudes of metabolic and myogenic frequencies but also in their structural complexity. This study demonstrates the feasibility of using complexity analysis of BFO to monitor the ischemic status of weight-bearing skin and risk of pressure ulcers.

Altered thermal hyperaemia in human skin by prior desensitization of neurokinin-1 receptors

The neuropeptides substance P (SP) and calcitonin gene-related peptide are believed to be involved in the axon reflex-mediated component of cutaneous thermal hyperaemia, but no studies have specifically addressed this issue. The purpose of this study was to determine whether neurokinin-1 receptors, which preferentially bind SP, contribute to the axon reflex component of cutaneous thermal hyperaemia. Nine subjects were equipped with four microdialysis fibres, and each fibre received one of the following four treatments: (1) lactated Ringer's solution (control); (2) 10 mml-NAME to inhibit nitric oxide synthase; (3) 10 μm SP; or (4) 10 μm SP + 10 mml-NAME. Skin blood flow was monitored via laser-Doppler flowmetry, and local skin temperature was controlled using local heating devices. Sites 3 and 4 were perfused with 10 μm SP for 15 min at a rate of 4 μl min(-1), and the ensuing vasodilatation was allowed to return to baseline. Following SP-induced vasodilatation, all skin sites were locally heated from a baseline temperature of 33°C to 42°C at a rate of 0.5°C every 5 s. Cutaneous vascular conductance (CVC) was calculated as skin blood flow/mean arterial pressure and normalized to the maximal value (%CVC(max)) via 28 mm nitroprusside and local heating to 43°C. The initial peak did not differ between control (79 ± 3%CVC(max)) and SP-only sites (79 ± 2%CVC(max)). The initial peaks at the l-NAME (43 ± 3%CVC(max)) and SP + l-NAME sites (53 ± 3%CVC(max)) were significantly reduced compared with both the control and the SP-only sites (P < 0.001 for both), and l-NAME sites were attenuated compared with SP + l-NAME sites (P < 0.01). There was no observable nadir response at sites pretreated with SP. Compared with control sites (57 ± 4%CVC(max)), the nadirs at the l-NAME (14 ± 2%CVC(max)) and the SP + l-NAME sites (31 ± 5%CVC(max)) were significantly reduced (P < 0.01 for all conditions). l-NAME significantly reduced the nadir compared with SP + l-NAME (P < 0.01). Plateau CVC values did not differ between control (86 ± 3%CVC(max)) and SP sites (91 ± 1%CVC(max)). At l-NAME (36 ± 4%CVC(max)) and SP +l-NAME sites (56 ± 6%CVC(max)), plateau CVC was significantly reduced compared with control and SP-only sites (P < 0.01 for all conditions). The plateau at l-NAME sites was significantly reduced compared with SP + l-NAME sites (P < 0.01). These data suggest that neurokinin-1 receptors contribute to both the axon reflex component and the secondary plateau phase of cutaneous thermal hyperaemia.