Digesters as heat storage: Effects of the digester temperature on the process stability, sludge liquor quality, and the dewaterability

Variation of the digester temperature during the year enables the operation of digesters as seasonal heat storage contributing to a holistic heat management at water resource recovery facilities. Full- and lab-scale process data were conducted to examine the effect of the digester temperature on process stability, sludge liquor quality, and dewaterability. Both full- and lab-scale digesters show a stable anaerobic degradation process with a hydraulic retention time of more than 20 days and organic load rates up to 2.2-kg COD/(m3 ·day) at temperatures between 33 and 53°C. The concentrations of soluble COD and ammonium-nitrogen in the sludge liquor digested at 53°C are 2.6 to 5.8 times and 1.3 times higher, respectively, than in the sludge liquor digested at 37°C. Dewatering tests show an enhancement of the dewaterability but a clear increase in the polymer demand at increased digester temperature. PRACTITIONER POINTS: Digesters can operate as seasonal heat storage within mesophilic and thermophilic temperatures Stable anaerobic degradation process for HRT above 20 days Maintenance of process stability as well as quantity and quality of biogas Increase of soluble COD in sludge liquor at higher temperatures Better dewaterability but higher demand for polymers with increasing temperature.

Application of Natural Clinoptilolite for Ammonium Removal from Sludge Water

Sludge water (SW) arising from the dewatering of anaerobic digested sludge causes high back loads of ammonium, leading to high stress (inhibition of the activity of microorganisms by an oversupply of nitrogen compounds (substrate inhibition)) for wastewater treatment plants (WWTP). On the other hand, ammonium is a valuable resource to substitute ammonia from the energy intensive Haber-Bosch process for fertilizer production. Within this work, it was investigated to what extent and under which conditions Carpathian clinoptilolite powder (CCP 20) can be used to remove ammonium from SW and to recover it. Two different SW, originating from municipal WWTPs were investigated (SW1: c₀ = 967 mg/L NH₄-N, municipal wastewater; SW2: c₀ = 718–927 mg/L NH₄-N, large industrial wastewater share). The highest loading was achieved at 307 K with 16.1 mg/g (SW1) and 15.3 mg/g (SW2) at 295 K. Kinetic studies with different specific dosages (0.05 g_CLI/mg_NH4-N), temperatures (283–307 K) and pre-loaded CCP 20 (0–11.4 mg/g) were conducted. At a higher temperature a higher load was achieved. Already after 30 min contact time, regardless of the sludge water, a high load up to 7.15 mg/g at 307 K was reached, achieving equilibrium after 120 min. Pre-loaded sorbent could be further loaded with ammonium when it was recontacted with the SW.