Effect of dewatering conditioners on phosphorus removal efficiency of sludge biochar

Based on the best dehydration effect, this study compared the adsorption phosphorus effect of sludge biochar after sludge conditioning with FeCl3, KMnO4, and cationic polyacrylamide (CPAM). This provided insights into the effects of chemical conditioning during the sludge dewatering stage on the overall phosphate adsorption of the dewatered sludge biochar. The phosphorus adsorption mechanism of the dewatering sludge biochar was analysed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier-transform infrared spectroscopy. Under the optimal pyrolysis temperature (300°C), the phosphate adsorption capacity of FeCl3-conditioned sludge biochar (SB-FeCl3) was increased 77 times of the unconditioned sludge biochar. In different solution environments (e.g. pH and coexisting anions), Phosphate adsorption of SB-FeCl3 was srtrongest when the pH of 9 and contained CO32-. Through the analysis of surface elements and functional groups, it was explained that the phosphorus removal effect of SB-FeCl3 comes from abundant active sites containing iron. Phosphorus release occurred in sludge biochar (SB) during the study. SB-FeCl3 solved SB the release of phosphorus, and improved the adsorption capacity of phosphorus.

A proof-of-concept experimental study for vacuum-driven anaerobic biosolids fermentation using the IntensiCarb technology

This study demonstrates the potential of an innovative anaerobic treatment technology for municipal biosolids (IntensiCarb), which relies on vacuum evaporation to decouple solids and hydraulic retention times (SRT and HRT). We present proof-of-concept experiments using primary sludge and thickened waste activated sludge (50-50 v/v mixture) as feed for fermentation and carbon upgrading with the IntensiCarb unit. IntensiCarb fully decoupled the HRT and SRT in continuously stirred anaerobic reactors (CSAR) to achieve two intensification factors, that is, 1.3 and 2, while keeping the SRT constant at 3 days (including in the control fermenter). The intensified CSARs were compared to a conventional control system to determine the yields of particulate hydrolysis, VFA production, and nitrogen partitioning between fermentate and condensate. The intensified CSAR operating at an intensification factor 2 achieved a 65% improvement in particulate solubilization. Almost 50% of total ammonia was extracted without pH adjustment, while carbon was retained in the fermentate. Based on these results, the IntensiCarb technology allows water resource recovery facilities to achieve a high degree of plant-wide intensification while partitioning nutrients into different streams and thickening solids. PRACTITIONER POINTS: The IntensiCarb reactor can decouple hydraulic (HRT) and solids (SRT) retention times in anaerobic systems while also increasing particulate hydrolysis and overall plant capacity. Using vacuum as driving force of the IntensiCarb technology, the system could achieve thickening, digestion, and partial dewatering in the same unit-thus eliminating the complexity of multi-stage biosolids treatment lines. The ability to partition nutrients between particulate, fermentate, and condensate assigns to the IntensiCarb unit a key role in recovery strategies for value-added products such as nitrogen, phosphorus, and carbon, which can be recovered separately and independently.

Highlights of the novel dewaterability estimation test (DET) device

Many industries, which are producing sludge in large quantities, depend on sludge dewatering technology to reduce the corresponding water content. A key design parameter for dewatering equipment is the capillary suction time (CST) test, which has, however, several scientific flaws, despite that the test is practical and easy-to-perform. The standard CST test has a few considerable drawbacks: its lack of reliability and difficulties in obtaining results for heavy sludge types. Furthermore, it is not designed for long experiments (e.g. >30 min), and has only two measurement points (its two electrodes). In comparison, the novel dewaterability estimation test (DET) test is almost as simple as the CST, but considerably more reliable, faster, flexible and informative in terms of the wealth of visual measurement data collected with modern image analysis software. The standard deviations associated with repeated measurements for the same sludge is lower for the DET than for the CST test. In contrast to the CST device, capillary suction in the DET test is linear and not radial, allowing for a straightforward interpretation of findings. The new DET device may replace the CST test in the sludge-producing industries in the future.