Nanoarchitectonics Solution Plasma Polymerization of Amino-Rich Carbon Nanosorbents for Use in Enhanced Fluoride Removal

Amino-functionalized carbon (NH2C) is an effective adsorbent in removing pollutants from contaminated water because of its high specific surface area and electrical charge. In the conventional preparation method, the introduction of amino groups onto the carbon surface is limited, resulting in low pollutant adsorption. Herein, we present simultaneous carbonization and amination to form NH2C via electrical discharge of nonequilibrium plasma, and the resultant material is applied as an effective adsorbent in fluoride removal. The simultaneous process introduces numerous amino groups into the carbon framework, enhancing the adsorption efficiency. The fluoride adsorption capacity is approximately 121.12 mg g-1, which is several times higher than those reported in previous studies. Furthermore, computational modeling is performed to yield deeper mechanistic insights into the molecular-level adsorption behavior. These data are useful in designing and synthesizing advanced materials for applications in water remediation.

Solution-Plasma Synthesis and Characterization of Transition Metals and N-Containing Carbon-Carbon Nanotube Composites

Lithium-air batteries (LABs) have a theoretically high energy density. However, LABs have some issues, such as low energy efficiency, short life cycle, and high overpotential in charge-discharge cycles. To solve these issues electrocatalytic materials were developed for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which significantly affect battery performance. In this study, we aimed to synthesize electrocatalytic N-doped carbon-based composite materials with solution plasma (SP) using Co or Ni as electrodes from organic solvents containing cup-stacked carbon nanotubes (CSCNTs), iron (II) phthalocyanine (FePc), and N-nethyl-2-pyrrolidinone (NMP). The synthesized N-doped carbon-based composite materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). TEM observation and XPS measurements revealed that the synthesized carbon materials contained elemental N, Fe, and electrode-derived Co or Ni, leading to the successful synthesis of N-doped carbon-based composite materials. The electrocatalytic activity for ORR of the synthesized carbon-based composite materials was also evaluated using electrochemical measurements. The electrochemical measurements demonstrated that the electrocatalytic performance for ORR of N-doped carbon-based composite material including Fe and Co showed superiority to that of N-doped carbon-based composite material including Fe and Ni. The difference in the electrocatalytic performance for ORR is discussed regarding the difference in the specific surface area and the presence ratio of chemical bonding species.

Carbon Fibers Prepared via Solution Plasma-Generated Seeds

Carbon fibers are materials with potential applications for CO₂ capture due to their porous structure and high surface areas. Nevertheless, controlling their porosity at a microscale remains challenging. The solution plasma (SP) process provides a fast synthesis route for carbon materials when organic precursors are used. During the discharge and formation of carbon materials in solution, a soot product-denominated solution plasma-generated seeds (SPGS) is simultaneously produced at room temperature and atmospheric pressure. Here, we propose a preparation method for carbon fibers with different and distinctive morphologies. The control over the morphology is also demonstrated by the use of different formulations.

A Review of Plasma Synthesis Methods for Polymer Films and Nanoparticles under Atmospheric Pressure Conditions

In this paper, we present an overview of recent approaches in the gas/aerosol-through-plasma (GATP) and liquid plasma methods for synthesizing polymer films and nanoparticles (NPs) using an atmospheric-pressure plasma (APP) technique. We hope to aid students and researchers starting out in the polymerization field by compiling the most commonly utilized simple plasma synthesis methods, so that they can readily select a method that best suits their needs. Although APP methods are widely employed for polymer synthesis, and there are many related papers for specific applications, reviews that provide comprehensive coverage of the variations of APP methods for polymer synthesis are rarely reported. We introduce and compile over 50 recent papers on various APP polymerization methods that allow us to discuss the existing challenges and future direction of GATP and solution plasma methods under ambient air conditions for large-area and mass nanoparticle production.

Effects of a Dielectric Barrier Discharge (DBD) on Characteristics of Polyaniline Nanoparticles Synthesized by a Solution Plasma Process with an Ar Gas Bubble Channel

The quality of polyaniline nanoparticles (PANI NPs) synthesized in plasma polymerization depends on the discharge characteristics of a solution plasma process (SPP). In this paper, the low temperature dielectric barrier discharge (DBD) is introduced to minimize the destruction of aniline molecules induced by the direct current (DC) spark discharge. By adopting the new electrode structure coupled with a gas channel, a low temperature DBD is successfully implemented in a SPP, for the first time, thus inducing an effective interaction between the Ar plasma and aniline monomer. We examine the effects of a low temperature DBD on characteristics of polyaniline nanoparticles synthesized by a SPP with an Ar gas bubble channel. As a result, both carbonization of aniline monomer and erosion of the electrode are significantly reduced, which is confirmed by analyses of the synthesized PANI NPs.

Enhanced Solar Photothermal Catalysis over Solution Plasma Activated TiO2

Colored wide-bandgap semiconductor oxides with abundant mid-gap states have long been regarded as promising visible light responsive photocatalysts. However, their catalytic activities are hampered by charge recombination at deep level defects, which constitutes the critical challenge to practical applications of these oxide photocatalysts. To address the challenge, a strategy is proposed here that includes creating shallow-level defects above the deep-level defects and thermal activating the migration of trapped electrons out of the deep-level defects via these shallow defects. A simple and scalable solution plasma processing (SPP) technique is developed to process the presynthesized yellow TiO₂ with numerous oxygen vacancies (Ov), which incorporates hydrogen dopants into the TiO₂ lattice and creates shallow-level defects above deep level of Ov, meanwhile retaining the original visible absorption of the colored TiO₂. At elevated temperature, the SPP-treated TiO₂ exhibits a 300 times higher conversion rate for CO₂ reduction under solar light irradiation and a 7.5 times higher removal rate of acetaldehyde under UV light irradiation, suggesting the effectiveness of the proposed strategy to enhance the photoactivity of colored wide-bandgap oxides for energy and environmental applications.

Enhanced Solar Photothermal Catalysis over Solution Plasma Activated TiO2

Colored wide-bandgap semiconductor oxides with abundant mid-gap states have long been regarded as promising visible light responsive photocatalysts. However, their catalytic activities are hampered by charge recombination at deep level defects, which constitutes the critical challenge to practical applications of these oxide photocatalysts. To address the challenge, a strategy is proposed here that includes creating shallow-level defects above the deep-level defects and thermal activating the migration of trapped electrons out of the deep-level defects via these shallow defects. A simple and scalable solution plasma processing (SPP) technique is developed to process the presynthesized yellow TiO2 with numerous oxygen vacancies (Ov), which incorporates hydrogen dopants into the TiO2 lattice and creates shallow-level defects above deep level of Ov, meanwhile retaining the original visible absorption of the colored TiO2. At elevated temperature, the SPP-treated TiO2 exhibits a 300 times higher conversion rate for CO2 reduction under solar light irradiation and a 7.5 times higher removal rate of acetaldehyde under UV light irradiation, suggesting the effectiveness of the proposed strategy to enhance the photoactivity of colored wide-bandgap oxides for energy and environmental applications.

Synthesis of a Polyaniline Nanoparticle Using a Solution Plasma Process with an Ar Gas Bubble Channel

This work researched polymerization of liquid aniline monomer by solution plasma with a gas bubble channel and investigated characteristics of solution plasma and polyaniline (PANI). The injected gas bubble channel in the proposed solution plasma process (SPP) played a significant role in producing a stable discharge in liquid aniline monomer at a low voltage and furthermore enhancing the contact surface area between liquid aniline monomer and plasma, thereby achieving polymerization on the boundary of the liquid aniline monomer and plasma. Solution plasma properties were analyzed with voltage⁻current, optical emission spectroscopy, and high-speed camera. Conductivity, percentage yield, and firing voltage of PANI nanoparticle dispersed solution were measured. To investigate the characteristics of synthesized PANI nanoparticles, field emission scanning electron microscopy, dynamic light scattering, transmission electron microscopy, selective area electron diffraction (SAED) pattern, Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography, ¹H-nuclear magnetic resonance (¹H-NMR), and X-ray photo spectroscopy (XPS) were examined. The FTIR, ¹H-NMR, and XPS analysis showed the PANI characteristic peaks with evidence that some quinoid and benzene rings were broken by the solution plasma process with a gas bubble channel. The results indicate that PANI nanoparticles have a spherical shape with a size between 25 and 35 nm. The SAED pattern shows the amorphous pattern.

Solution-Plasma-Assisted Bimetallic Oxide Alloy Nanoparticles of Pt and Pd Embedded within Two-Dimensional Ti3C2T x Nanosheets as Highly Active Electrocatalysts for Overall Water Splitting

Exploiting high-efficiency and low-cost bifunctional electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has been actively encouraged because of their potential applications in the field of clean energy. In this paper, we reported a novel electrocatalyst based on an exfoliated two-dimensional (2D) MXene (Ti₃C₂T _x) loaded with bimetallic oxide alloy nanoparticles (NPs) of Pt and Pd (represented by PtO _aPdO _bNPs@Ti₃C₂T _x), which was synthesized via solution plasma (SP) modification. The prepared materials were then utilized as highly efficient bifunctional electrocatalysts toward the HER and OER in alkaline solution. At a high plasma input power (200 W), bimetallic oxide alloy nanoparticles of Pt and Pd or nanoclusters with different metallic valence states were deposited onto the Ti₃C₂T _x nanosheets. Because of the synergism of the noble-metal NPs and the Ti₃C₂T _x nanosheets, the electrocatalytic results revealed that the as-prepared PtO _aPdO _bNPs@Ti₃C₂T _x nanosheets under the plasma input power of 200 W for 3 min only required a low overpotential to attain 10 mA cm^-2 for the HER (-26.5 mV) in 0.5 M H₂SO₄ solution and OER (1.54 V) in 0.1 M KOH solution. Moreover, water electrolysis using this catalyst achieved a water splitting current density of 10 mA cm^-2 at a low cell voltage of 1.53 V in 1.0 M KOH solution. These results suggested that the hybridization of the extremely low usage of PtO _a/PdO _b NPs (1.07 μg cm^-2) and Ti₃C₂T _x nanosheets by SP will expand the applications of other clean energy reactions to achieve sustainable energy.

Solution-Plasma-Mediated Synthesis of Si Nanoparticles for Anode Material of Lithium-Ion Batteries

Silicon anodes have attracted considerable attention for their use in lithium-ion batteries because of their extremely high theoretical capacity; however, they are prone to extensive volume expansion during lithiation, which causes disintegration and poor cycling stability. In this article, we use two approaches to address this issue, by reducing the size of the Si particles to nanoscale and incorporating them into a carbon composite to help modulate the volume expansion problems. We improve our previous work on the solution-plasma-mediated synthesis of Si nanoparticles (NPs) by adjusting the electrolyte medium to mild buffer solutions rather than strong acids, successfully generating Si-NPs with <10 nm diameters. We then combined these Si-NPs with carbon using MgO-template-assisted sol-gel combustion synthesis, which afforded porous carbon composite materials. Among the preparations, the composite material obtained from the LiCl 0.2 M + H₃BO₃ 0.15 M solution-based Si-NPs exhibited a high reversible capacity of 537 mAh/g after 30 discharge/charge cycles at a current rate of 0.5 A/g. We attribute this increased reversible capacity to the decreased particle size of the Si-NPs. These results clearly show the applicability of this facile and environmentally friendly solution-plasma technique for producing Si-NPs as an anode material for lithium-ion batteries.