Comprehensive Characterization of Micronized Wholemeal Flours: Investigating Technological Properties across Various Grains

With a suitable milling system, it is achievable to produce wholegrain flours that match the granulation and technological properties of refined flours while maintaining a complete nutritional profile. This process also minimizes the generation of additional industrial waste. This study aimed to characterize wholemeal flours with a fine granulation size of less than 160 µm: wheat (MWF), rye (MRF), spelt (MSF), barley (MBF), buckwheat (MBWF), and sorghum (MSGF). For comparison, the plain wheat flour type 530 (T530) was analyzed. The flours were assessed in terms of their chemical compositions and alpha amylase activities (the Falling Number assay), pasting properties (amylograph and a Rapid Visco Analyser (RVA)), water absorption using a farinograph, and technological quality based on their water (WRC) and sodium carbonate solvent retention capacity (SRC) profiles. Among the micronized wholemeal flours, wheat flour (MWF) exhibited the highest nutritional value, greatest water absorption, and highest final gelatinization temperature, but had the lowest energy value, carbohydrate content, water SRC, and sodium carbonate SRC. Wholemeal rye flour (MRF) displayed the lowest nutrient content and the highest amylolytic activity, water absorption, and sodium carbonate SRC. The plain wheat flour type 530 (T530) had the lowest water absorption. Special buckwheat flour (MBWF) showed the highest energy value due to its elevated carbohydrate content, along with the lowest sugar and TDF contents, amylolytic activity, and pasting temperature.

New flavors from old wheats: exploring the aroma profiles and sensory attributes of local Mediterranean wheat landraces

Introduction

During the 20th century, the worldwide genetic diversity of wheat was sharply eroded by continual selection for high yields and industry demands for particular standardized qualities. A collection of Israeli and Palestinian landraces (IPLR) was established to represent genetic diversity, accumulated for ten millennia under diverse environments, which was mostly lost in this transition. As our long-term goal is to study this pre- Green Revolution genetic reservoir, herein we focus on its flour and bread quality and sensorial attributes.

Methods

Initially, a database was built for the entire IPLR collection (n=901) holding both Triticum durum (durum wheat) and T. aestivum (bread wheat) which included genetic and phenotypic characterization of agronomic traits, grain and flour quality. Then, a representative subset of the IPLR was selected and compared to modern varieties for dough quality, rheology, aroma and taste using both whole and refined flours and breads. The sensory panel used 40 subjects who evaluated common protocol or sourdough breads made by four artisan bakers.

Results

Results show modern durum cultivar C-9 had superior rheological properties (gluten index, elasticity, dough development time) as compared with landraces, while bread landrace 'Diar Alla' was markedly preferable for baking in relation to the modern cultivar Gadish. Baking tests and subsequent sensory evaluation clearly demonstrated a preference toward refined breads, apart from whole breads prepared using sourdough starters. In bread wheat, loaves baked using landrace flour were scored higher in several quality parameters, whereas in durum lines, the opposite trend was evident. Loaves baked from landraces 'Diar Alla' and to a lesser extent 'Hittia Soada' presented a markedly different aroma from the control loaves prepared from modern flours, both in terms of overall compositions and individual compounds, including classes such as pyranones, pyrazines, furans and pyrroles (maltol). Modern lines, on the other hand, were consistently richer in terpenes and phenylpropanoids. Further analysis demonstrated a significant association between specific aroma classes and sensory attributes scored by panelists.

Discussion

The findings of the study may help advance new niches in the local wheat market aimed at health and nutrition including adapting durum varieties to the bread market and developing flavor-enhanced wholemeal breads.

Panicum decompositum, an Australian Native Grass, Has Strong Potential as a Novel Grain in the Modern Food Market

Native Millet (Panicum decompositum) is a native grass species that was used as a staple food by many Australian Aboriginal communities. In this study, the potential for using Native Millet (NM) as a novel flour in the modern food market was investigated. Intact grain and white and wholemeal flours from two populations of NM were compared to bread wheat cv. Spitfire (SW) using a range of physical and chemical tests. The baking properties of NM flour were assessed using basic flatbreads made with 25:75 and 50:50 (NM:SW) mixes of wholemeal flour with 100% SW wholemeal flour used as the control. The grain size of NM was found to be smaller than SW. Milling yield, defined as the proportion of flour obtained from a whole seed, for NM was 4-10% lower than SW under the same moisture conditions used for tempering (drying) wheat. The properties of wholemeal flour indicated that NM flour has lower viscosity and low flour pasting ability compared to SW. This is likely due to the low starch content and high fibre content of NM seed. Wholemeal flour derived from NM had a protein content of 13.6% compared to 12.1% for SW. Based on a sensory analysis using an untrained panel, the distinct colour and texture may negatively affect the acceptance of NM flour by the consumer, but taste and aroma was not found to differ among samples. There were strong indications that the novelty of NM flour may help outweigh any limitations to consumer acceptance, making it a valuable product in future food markets.

Comparative Analysis of Qualitative and Bioactive Compounds of Whole and Refined Flours in Durum Wheat Grains with Different Year of Release and Yield Potential

Durum wheat varieties are important sources of nutrients and provide remarkable amounts of phytochemicals. Especially, phenolics, which are mostly located in external layers of grains, have recently gained increased interest due to their high antioxidant power. This study aimed to evaluate the differences in the quality traits and phenolic compounds' concentration (e.g., phenolic acids) of different durum wheat genotypes, namely four Italian durum wheat cultivars and a USA elite variety, in relation to their yield potential and year of release. Phenolic acids were extracted both from wholemeal flour and semolina and analysed through HPLC-DAD analysis. Ferulic acid was the most represented phenolic acid, both in the wholemeal flour (438.3 µg g^-1 dry matter) and in semolina (57.6 µg g^-1 dry matter) across all cultivars, followed by p-coumaric acid, sinapic acid, vanillin, vanillic acid, syringic acid, and p-hydroxybenzoic acid. Among the cultivars, Cappelli showed the highest phenolic acid content, whilst Kronos had the lowest one. Negative correlations occurred between some phenolic acids and morphological and yield-related traits, especially for Nadif and Sfinge varieties. On the contrary, durum wheat genotypes with low yield potential such as Cappelli accumulated higher concentrations of phenolic acids under the same growing conditions, thereby significantly contributing to the health-promoting purposes.

Physicochemical, Nutritional, and Antioxidant Properties in Seven Sweet Potato Flours

Sweet potato flour is a key ingredient for the production of new food products worldwide, which imparts desired properties, nutritional value, antioxidants, and natural color to processed foods. However, little information regarding the functional properties of the sweet potato flour is available. In this study, the genetic diversity in the physiochemical, nutritional, and antioxidant properties of wholemeal flour from seven sweet potato varieties was investigated. The total phenolic content (TPC) of the free and bound fractions ranged from 13.85 to 90.74 mg gallic acid equivalent (GAE)/100 g and from 5.07 to 24.29 mg GAE/100 g, respectively. The average protein content of sweet potato was 5.41 g/100 g ranging from 3.40 to 8.60 g/100 g DW. The total amino acid content averaged 45.13 mg/g DW. The average contents of 12 mineral elements were in the order of K > P > Ca > Mg > Mn > Fe > Zn > Cu > Ni > Se > Cr > Cd. K and P contents were the highest among all accessions, which were positively correlated with most of the other minerals. The average starch content of sweet potato was 53.90 g/100 g DW, ranging from 31.68 to 64.90%. The peak viscosity (PV), hot paste viscosity (HPV), and cold paste viscosity (CPV) were in the range of 90.7-318.8 Rapid Visco Unit (RVU), 77.3-208.3 RVU, and 102.6-272.7 RVU, respectively. The hardness values and cohesiveness (Coh) varied among different sweet potatoes, with a range of 8.20-18.48 g and 0.22-0.68, respectively. The gelatinization onset, peak, conclusion temperatures, and enthalpy were in the ranges of 59.39-71.91°C, 70.19-88.40°C, 78.98-95.79°C, 1.85-5.65 J/g, respectively.

Physicochemical Characterization of Thirteen Quinoa (Chenopodium quinoa Willd.) Varieties Grown in North-West Europe-Part II

Quinoa cultivation has gained increasing interest in Europe but more research on the characteristics of European varieties is required to help determine their end use applications. A comparative study was performed on 13 quinoa varieties cultivated under North-West European field conditions during three consecutive growing seasons (2017-2019). The seeds were milled to wholemeal flour (WMF) to evaluate the physicochemical properties. The WMFs of 2019 were characterized by the highest water absorption capacity (1.46-2.06 g/g), while the water absorption index (WAI) between 55 °C (2.04-3.80 g/g) and 85 °C (4.04-7.82 g/g) increased over the years. The WMFs of 2018 had the highest WAI at 95 °C (6.48-9.48 g/g). The pasting profiles were characterized by a high viscosity peak (1696-2560 mPa.s) and strong breakdown (-78-643 mPa.s) in 2017. The peak viscosity decreased in 2018 and 2019 (823-2492 mPa.s), while breakdown (-364-555 mPa.s) and setback (19-1037 mPa.s) increased. Jessie, Summer Red, Rouge Marie, Vikinga, and Zwarte WMFs were characterized by low WAIs and high shear resistance. Bastille WMF developed high viscosities and, along with Faro WMF, showed a high breakdown. The wide variation in physicochemical properties suggests that the potential food applications of WMFs depend on the variety and growing conditions.

Bacterial community dynamics in spontaneous sourdoughs made from wheat, spelt, and rye wholemeal flour

Sourdough fermentation is a traditional process that is used to improve bread quality. A spontaneous sourdough ecosystem consists of a mixture of flour and water that is fermented by endogenous lactic acid bacteria (LAB) and yeasts. The aim of this study was to identify bacterial diversity during backslopping of spontaneous sourdoughs prepared from wheat, spelt, or rye wholemeal flour. Culture-dependent analyses showed that the number of LAB (10⁹  CFU/ml) was higher by three orders of magnitude than the number of yeasts (10⁶  CFU/ml), irrespective of the flour type. These results were complemented by next-generation sequencing of the 16S rDNA V3 and V4 variable regions. The dominant phylum in all sourdough samples was Firmicutes, which was represented exclusively by the Lactobacillales order. The two remaining and less abundant phyla were Proteobacteria and Bacteroidetes. The culture-independent approach allowed us to detect changes in microbial ecology during the 72-hr fermentation period. Weissella sp. was the most abundant genus after 24 hr of fermentation of the rye sourdough, but as the process progressed, its abundance decreased in favor of the Lactobacillus genus similarly as in wheat and spelt sourdoughs. The Lactobacillus genus was dominant in all sourdoughs after 72 hr, which was consistent with our results obtained using culture-dependent analyses. This work was carried out to determine the microbial biodiversity of sourdoughs that are made from wheat, spelt, and rye wholemeal flour and can be used as a source of strains for specific starter cultures to produce functional bread.

Procedures for Breadmaking Quality Assessment of Rye Wholemeal Flour

The aim of this study was to evaluate the baking value of rye flours from industrial mills and to indicate which rye flour quality parameters are the most important predictors of wholemeal rye bread quality for commercially milled rye grains. Ten wholemeal rye flours, which were characterized by ash content ranging from 1.43% to 2.42% d.m. (dry mass), were used for the study. The parameters that characterize the flour properties and the baking test were assessed. The study revealed that for the analyzed commercial rye flours, the falling number test and the amylograph properties are insufficient parameters for predicting the quality of wholemeal rye bread. The manufacture of good quality wholemeal bread requires the use of rye flour with superior quality, such as fine granulation, low protein content, low total and insoluble pentosans content, and, in particular, a high percentage of water-soluble pentosans content. Breads with a higher volume were obtained from rye flours that were generally characterized by lower protein content, lower total and insoluble pentosans content, and higher water-soluble pentosans content. Flour granulation and the percentage of water-soluble pentosans content especially, had a significant impact on bread’s hardness of crumb and the hardness of crumb’s increase during bread storage.

durum Desf.) after Field Treatment with Plant Water Extracts

The use of selected plant water extracts to control pests and weeds is gaining growing attention in organic and sustainable agriculture, but the effects that such extracts may exert on the quality aspects of durum wheat are still unexplored. In 2014, 5 plant water extracts (Artemisia arborescens, Euphorbia characias, Rhus coriaria, Thymus vulgaris, Lantana camara) were prepared and distributed on durum wheat cv Valbelice to evaluate their potential herbicidal effects. After crop harvesting, the major physicochemical and technological parameters of wholemeal flours obtained from each treatment were measured and compared with those from chemical weeding and untreated controls. A baking test was also performed to evaluate the breadmaking quality. In wholemeal flours obtained after the treatment with plant extracts protein and dry gluten content were higher than in control and chemical weeding. Wholemeal flours obtained after chemical weeding reached the highest Mixograph parameters, and that from durum wheat treated with R. coriaria extract demonstrated a very high α-amylase activity. We concluded that the treatments with plant water extracts may influence many quality traits of durum wheat. This occurrence must be taken into account in overall decisions concerning the use of plant extracts in pest and weed management practice.

durum Desf.) after Field Treatment with Plant Water Extracts

The use of selected plant water extracts to control pests and weeds is gaining growing attention in organic and sustainable agriculture, but the effects that such extracts may exert on the quality aspects of durum wheat are still unexplored. In 2014, 5 plant water extracts (Artemisia arborescens, Euphorbia characias, Rhus coriaria, Thymus vulgaris, Lantana camara) were prepared and distributed on durum wheat cv Valbelice to evaluate their potential herbicidal effects. After crop harvesting, the major physicochemical and technological parameters of wholemeal flours obtained from each treatment were measured and compared with those from chemical weeding and untreated controls. A baking test was also performed to evaluate the breadmaking quality. In wholemeal flours obtained after the treatment with plant extracts protein and dry gluten content were higher than in control and chemical weeding. Wholemeal flours obtained after chemical weeding reached the highest Mixograph parameters, and that from durum wheat treated with R. coriaria extract demonstrated a very high α-amylase activity. We concluded that the treatments with plant water extracts may influence many quality traits of durum wheat. This occurrence must be taken into account in overall decisions concerning the use of plant extracts in pest and weed management practice.