Purification and characterization of two extremely thermostable enzymes, phosphate acetyltransferase and acetate kinase, from the hyperthermophilic eubacterium Thermotoga maritima

Phosphate acetyltransferase (PTA) and acetate kinase (AK) of the hyperthermophilic eubacterium Thermotoga maritima have been purified 1,500- and 250-fold, respectively, to apparent homogeneity. PTA had an apparent molecular mass of 170 kDa and was composed of one subunit with a molecular mass of 34 kDa, suggesting a homotetramer (alpha4) structure. The N-terminal amino acid sequence showed significant identity to that of phosphate butyryltransferases from Clostridium acetobutylicum rather than to those of known phosphate acetyltransferases. The kinetic constants of the reversible enzyme reaction (acetyl-CoA + Pi -->/<-- acetyl phosphate + CoA) were determined at the pH optimum of pH 6.5. The apparent Km values for acetyl-CoA, Pi, acetyl phosphate, and coenzyme A (CoA) were 23, 110, 24, and 30 microM, respectively; the apparent Vmax values (at 55 degrees C) were 260 U/mg (acetyl phosphate formation) and 570 U/mg (acetyl-CoA formation). In addition to acetyl-CoA (100%), the enzyme accepted propionyl-CoA (60%) and butyryl-CoA (30%). The enzyme had a temperature optimum at 90 degrees C and was not inactivated by heat upon incubation at 80 degrees C for more than 2 h. AK had an apparent molecular mass of 90 kDa and consisted of one 44-kDa subunit, indicating a homodimer (alpha2) structure. The N-terminal amino acid sequence showed significant similarity to those of all known acetate kinases from eubacteria as well that of the archaeon Methanosarcina thermophila. The kinetic constants of the reversible enzyme reaction (acetyl phosphate + ADP -->/<-- acetate + ATP) were determined at the pH optimum of pH 7.0. The apparent Km values for acetyl phosphate, ADP, acetate, and ATP were 0.44, 3, 40, and 0.7 mM, respectively; the apparent Vmax values (at 50 degrees C) were 2,600 U/mg (acetate formation) and 1,800 U/mg (acetyl phosphate formation). AK phosphorylated propionate (54%) in addition to acetate (100%) and used GTP (100%), ITP (163%), UTP (56%), and CTP (21%) as phosphoryl donors in addition to ATP (100%). Divalent cations were required for activity, with Mn2+ and Mg2+ being most effective. The enzyme had a temperature optimum at 90 degrees C and was stabilized against heat inactivation by salts. In the presence of (NH4)2SO4 (1 M), which was most effective, the enzyme did not lose activity upon incubation at 100 degrees C for 3 h. The temperature optimum at 90 degrees C and the high thermostability of both PTA and AK are in accordance with their physiological function under hyperthermophilic conditions.

The iron-sulfur centers of the pyruvate:ferredoxin oxidoreductase from Methanosarcina barkeri (Fusaro)

The iron-sulfur clusters of a pyruvate:ferredoxin oxidoreductase isolated from a methanogenic archaeon, Methanosarcina barkeri (Fusaro), have been unambiguously identified for the first time. In agreement with the estimated iron and sulfur contents (Bock and Schonheit, Eur. J. Biochem., 237 (1996) 35-44), the enzyme is shown to contain three [4Fe-4S](2+/1+) clusters, which in the reduced state give a complex EPR spectrum resulting from three distinct centres, magnetically interacting. The catalytic cycle of the enzyme was studied by visible and EPR spectroscopies. A thiamine diphosphate based radical is also an intermediate in the M. barkeri enzyme catalytic cycle. However, under anaerobic conditions, the enzyme or Clostridium pasteurianum ferredoxin iron-sulfur clusters are reduced only in the presence of both substrates, pyruvate and coenzyme A.

Purification and properties of acetyl-CoA synthetase (ADP-forming), an archaeal enzyme of acetate formation and ATP synthesis, from the hyperthermophile Pyrococcus furiosus

Acetyl-CoA synthetase (ADP-forming) is an enzyme in Archaea that catalyzes the formation of acetate from acetyl-CoA and couples this reaction with the synthesis of ATP from ADP and Pi (acetyl-CoA + ADP + Pi --> acetate + ATP + CoA) [Schifer, T., Selig, M. & Schonheit, P. (1993) Arch. Microbiol. 159, 72-83]. The enzyme from the anaerobic hyperthermophile Pyrococcus furiosus was purified 96-fold with a yield of 20% to apparent electrophoretic homogeneity. The oxygen-stable enzyme had an apparent molecular mass of 145 kDa and was composed of two subunits with apparent molecular masses of 47 kDa and 25 kDa, indicating an alpha2beta2 structure. The N-terminal amino acid sequences of both subunits were determined; they do not show significant identity to other proteins in databases. The purified enzyme catalyzed the reversible conversion of acetyl-CoA, ADP and Pi to acetate, ATP and CoA. The apparent Vmax value in the direction of acetate formation was 18 U/mg (55 degrees C), the apparent Km values for acetyl-CoA, ADP and Pi were 17 microM, 60 microM and 200 microM, respectively. ADP and Pi could not be replaced by AMP and PPi, defining the enzyme as an ADP-forming rather than an AMP-forming acetyl-CoA synthetase. The apparent Vmax value in the direction of acetyl-CoA formation was about 40 U/mg (55 degrees C), and the apparent Km values for acetate, ATP and CoA were 660 microM, 80 microM and 30 microM, respectively. The purified enzyme was not specific for acetyl-CoA or acetate, in addition to acetyl-CoA (100%), the enzyme accepts propionyl-CoA (110%) and butyryl-CoA (92%), and in addition to acetate (100%), the enzyme accepts propionate (100%), butyrate (92%), isobutyrate (79%), valerate (36%) and isovalerate (34%), indicating that the enzyme functions as an acyl-CoA synthetase (ADP-forming) with a broad substrate spectrum. Succinate, phenylacetate and indoleacetate did not serve as substrates for the enzyme (<3%). In addition to ADP (100%), GDP (220%) and IDP (250%) were used, and in addition to ATP (100%), GTP (210%) and ITP (320%) were used. Pyrimidine nucleotides were not accepted. The enzyme was dependent on Mg2+, which could be partly substituted by Mn2+ and Co2+. The pH optimum was pH 7. The enzyme has a temperature optimum at 90 degrees C, which is in accordance with its physiological function under hyperthermophilic conditions. The enzyme was stabilized against heat inactivation by salts. In the presence of KCI (1 M), which was most effective, the enzyme did not loose activity after 2 h incubation at 100 degrees C.

Catalytic properties, molecular composition and sequence alignments of pyruvate: ferredoxin oxidoreductase from the methanogenic archaeon Methanosarcina barkeri (strain Fusaro)

Methanosarcina barkeri (strain Fusaro) was grown on pyruvate as methanogenic substrate [Bock, A. K., Prieger-Kraft, A. & Schönheit, P. (1994) Arch. Microbiol. 161, 33-46]. The first enzyme of pyruvate catabolism, pyruvate oxidoreductase, which catalyzes oxidation of pyruvate to acetyl-CoA was purified about 90-fold to apparent electrophoretic homogeneity. The purified enzyme catalyzed the CoA-dependent oxidation of pyruvate with ferredoxin as an electron acceptor which defines the enzyme as a pyruvate: ferredoxin oxidoreductase. The deazaflavin, coenzyme F420, which has been proposed to be the physiological electron acceptor of pyruvate oxidoreductase in methanogens, was not reduced by the purified enzyme. In addition to ferredoxin and viologen dyes, flavin nucleotides served as electron acceptors. Pyruvate: ferredoxin oxidoreductase also catalyzed the oxidation of 2-oxobutyrate but not the oxidation of 2-oxoglutarate, indolepyruvate, phenylpyruvate, glyoxylate, 3-hydroxypyruvate and oxaloacetate. The apparent Km values of pyruvate:ferredoxin oxidoreductase were 70 microM for pyruvate, 6 microM for CoA and 30 microM for clostridial ferredoxin. The apparent Vmax with ferredoxin was about 30 U/mg (at 37 degrees C) with a pH optimum of approximately 7. The temperature optimum was approximately 60 degrees C and the Arrhenius activation energy was 40 kJ/mol (between 30 degrees C and 60 degrees C). The enzyme was extremely oxygen sensitive, losing 90% of its activity upon exposure to air for 1 h at 0 degrees C. Sodium nitrite inhibited the enzyme with a Ki of about 10 mM. The native enzyme had an apparent molecular mass of approximately 130 kDa and was composed of four different subunits with apparent molecular masses of 48, 30, 25, and 15 kDa which indicates that the enzyme has an alpha beta gamma delta structure. The enzyme contained 1 mol/mol thiamine diphosphate, and about 12 mol/mol each of non-heme iron and acid-labile sulfur. FAD, FMN and lipoic acid were not found. The N-terminal amino acid sequences of the four subunits were determined. The sequence of the alpha-subunit was similar to the N-terminal amino acid sequence of the alpha-subunit of the heterotetrameric pyruvate:ferredoxin oxidoreductases of the hyperthermophiles Archaeoglobus fulgidus, Pyrococcus furiosus and Thermotoga maritima and of the mesophile Helicobacter pylori, and to the N-terminal amino acid sequence of the homodimeric pyruvate:ferredoxin oxidoreductase from proteobacteria and from cyanobacteria. No sequence similarities were found, however, between the alpha-subunit of the M. barkeri enzyme and the heterodimeric pyruvate:ferredoxin oxidoreductase of the archaeon Halobacterium halobium.

Growth of Methanosarcina barkeri (Fusaro) under nonmethanogenic conditions by the fermentation of pyruvate to acetate: ATP synthesis via the mechanism of substrate level phosphorylation

A mutant of Methanosarcina barkeri (Fusaro) is able to grow on pyruvate as the sole carbon and energy source. During growth, pyruvate is converted to CH4 and CO2, and about 1.5 mol of ATP per mol of CH4 is formed (A.-K. Bock, A. Prieger-Kraft, and P. Schönheit, Arch. Microbiol. 161:33-46, 1994). The pyruvate-utilizing mutant of M. barkeri could also grow on pyruvate when methanogenesis was completely inhibited by bromoethanesulfonate (BES). The mutant grew on pyruvate (80 mM) in the presence of 2 mM BES with a doubling time of about 30 h up to cell densities of about 400 mg (dry weight) of cells per liter. During growth on pyruvate, the major fermentation products were acetate and CO2 (about 0.9 mol each per mol of pyruvate). Small amounts of acetoin, acetolactate, alanine, leucine, isoleucine, and valine were also detected. CH4 was not formed. The molar growth yield (Yacetate) was about 9 g of cells (dry weight) per mol of acetate, indicating an ATP yield of about 1 mol/mol of acetate formed. Growth on pyruvate in the presence of BES was limited; after six to eight generations, the doubling times increased and the final cell densities decreased. After 9 to 11 generations, growth stopped completely. In the presence of BES, suspensions of pyruvate-grown cells fermented pyruvate to acetate, CO2, and H2. CH4 was not formed. Conversion of pyruvate to acetate, in the complete absence of methanogenesis, was coupled to ATP synthesis. Dicyclohexylcarbodiimide, an inhibitor of H(+)-translocating ATP synthase, did not inhibit ATP formation. In the presence of dicyclohexylcarbodiimide, stoichiometries of up to 0.9 mol of ATP per mol of acetate were observed. The uncoupler arsenate completely inhibited ATP synthesis, while the rates of acetate, CO2, and H2 formation were stimulated up to fourfold. Cell extracts of M. barkeri grown on pyruvate under nonmethenogenic conditions contained pyruvate: ferredoxin oxidoreductase (0.5 U/mg), phosphate acetyltransferase (12 U/mg), and acetate kinase (12 U/mg). From these data it is concluded that ATP was synthesized by substrate level phosphorylation during growth of the M. barkeri mutant on pyruvate in the absence of methanogenesis. This is the first report of growth of a methanogen under nonmethanogenic conditions at the expense of a fermentative energy metabolism.