Valorisation diagnosis of waste from the decontamination of phosphogypsum leachates through a combined calcium carbonate/hydroxide process

Phosphogypsum is an industrial waste considered as naturally occurring radioactive material. Stack disposal and exposure to the environmental condition involve the production of acid leachates with high potential pollutant loads as heavy metals and radionuclides. In this study, a sequential neutralisation process was applied for cleaning the generated releases, and the two obtained residues were characterised from the physical-chemical and radiological point of view before their valorisation. The cleaning process was made up of two steps: the first one using calcium carbonate until pH = 3.5, and the second one using calcium hydroxide until pH = 12. The residue obtained in the first step was mostly calcium fluoride, while in the second step most phosphates were precipitated, mainly as hydroxyapatite. The final liquid was treated to reduce pH lower than 9, which is the limit included in the current directive for discharges of liquid effluents into coastal waters. The main conclusion was that the solids from the first step could be valorised as an additive in the manufacture of commercial Portland cements and ceramics, while the solids from the second step could be used as raw material for the phosphoric acid manufacture.

Sedimentary environmental quality of a biosphere reserve estuary in southwestern Iberian Peninsula

The Huelva estuary is formed by the common mouths of the Odiel and Tinto Rivers, and inside this ecosystem is the biosphere reserve of the Odiel saltmarshes. This ecosystem has been historically affected by acid mine drainage (AMD) and by releases of pollutants from five phosphoric acid industrial plants and phosphogypsum (PG) waste stacks located in the area. This study carried out a comprehensive assessment of the environmental impact of the biosphere reserve of the Odiel saltmarshes. To this end, it was necessary to find a suitable sedimentary background (Piedras River in our case). To quantify this impact, several pollution indexes were used. According to the values reached by the indexes, this impact was classified as "serious" pollution for most trace elements, excepting the deepest layers, and "low-moderate" pollution for the 238U-series radionuclides, while no pollution for the 232Th-series and 40K radionuclides was found as expected.

Behavior of 222Rn, 220Rn and their progenies along a daily cycle for different meteorological situations: Implications on atmospheric aerosol residence times and Rn daughters' equilibrium factors

The correct assessment of the radiological hazard from radon and daughters, external and internal doses, residence times and equilibrium factors, implies the need to properly determine 222Rn (radon), 220Rn (thoron) and their respective short-lived progenies (214Pb and 214Bi, and 212Pb and 212Bi, respectively), where the precise measurements of both progenies are quite complex due to their very short half-lives. In addition, it is important to study the temporal behavior of all these radionuclides along daily cycles. Therefore, the aim of this study was to analyze the temporal evolution of radon, thoron and their progenies, and of their activity ratios along daily cycles for two different meteorological situations (synoptic and mesoscale processes). Radon and thoron were measured using a radon monitoring system, while their respective progenies were collected onto atmospheric filters using an ASS-500 sampler, and then measured by gamma-ray spectrometry. Furthermore, the different relationships between the concentrations of radionuclides and the different meteorological variables of interest (temperature, ABL height, and speed and direction of the wind) were found. Finally, the atmospheric aerosol residence times and Rn daughters' equilibrium factors were estimated for each sampling carried out along the two daily cycles, finding results consistent with previous studies.

A new efficiency calibration methodology for different atmospheric filter geometries by using coaxial Ge detectors

The study of the different pollutants present in atmospheric aerosols such as trace elements and radionuclides is essential to assess the air quality. To analyze the particulate matter (PM), atmospheric filters with different dimensions and geometries (rectangular, circular, slotted, and square filters) are usually employed. Regarding the pollutants existing in atmospheric aerosols, radionuclides are usually analyzed due to their multiple applications such as either in the environmental radiological control or as tracers of atmospheric processes. Therefore, this study aims to develop a new and general methodology to calibrate in efficiency coaxial Ge detectors to properly determine radionuclides present in the PM by gamma-ray spectrometry for several filter types. For this, granular certified reference materials (CRM) containing only natural radionuclides (238U-series, 232Th-series, and 40 K) were selected. Several granular solid CRMs were chosen allowing us to reproduce the same PM deposition geometry and to assure the homogeneity of the added CRMs. These are the main advantages in relation to the typical methods that use liquid CRMs. Furthermore, for filters whose surfaces are relatively large, they were cut in several pieces and placed one on top of the other, achieving the same geometry than the PM deposited onto the filter. Then, the experimental full-energy peak efficiencies (FEPEs) were obtained for each energy of interest (Eγ) and they were fitted versus Eγ, finding a general FEPE function for each filter type. Finally, this methodology was validated for both natural and artificial radionuclides (from 46 to 1332 keV) by using different filter types employed in proficiency test exercises, obtaining |zscore|< 2 for all cases.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11869-023-01336-x.

A methodology to determine 212Pb, 212Bi, 214Pb and 214Bi in atmospheric aerosols; Application to precisely obtain aerosol residence times and Rn-daughters' equilibrium factors

Progeny of ²²²Rn and ²²⁰Rn, (²¹²Pb, ²¹²Bi, ²¹⁴Pb and ²¹⁴Bi) are essential to assess radiological hazard, external and internal doses, residence times and equilibrium factors. Precise measurements of these nuclides are quite complex due to their very short half-lives. This study outlines a new and precise methodology to measure these nuclides. Radon-222 and ²²⁰Rn were measured using a radon monitoring system, while their respective progenies were collected in an atmospheric filter using an ASS-500 sampler and measured by gamma-ray spectrometry. The ²¹²Pb concentrations were very similar to the thoron ones, where all ²¹²Bi/²¹²Pb ratios were consistently less than 1. The relative uncertainties, σ_r, of the ²¹²Pb and ²¹²Bi activity concentrations, and ²¹²Bi/²¹²Pb activity ratio are generally less than 10%. Moreover, ²¹⁴Pb/²²²Rn ratios were about 0.7, agreeing well with previous works. The σ_r for ²¹⁴Pb, ²¹⁴Bi and ²¹⁴Bi/²¹⁴Pb were generally less than 6%. This methodology was applied to estimate aerosol residence times using the ²¹⁴Pb/²²²Rn and ²¹²Bi/²¹²Pb activity ratios, and to obtain equilibrium factors, achieving consistent results. Furthermore, the methodology consistency and validity range were studied with time elapsed between sampling end and counting start, and the sampling durations, finding the optimum times to precisely determine ²¹²Pb, ²¹²Bi, ²¹⁴Pb and ²¹⁴Bi.

A simple and precise methodology to determine particulate matter mass in atmospheric filters; validation and application cases

In the past decades, particulate matter (PM) measurements have been used extensively in atmospheric sciences, as it allows studying the evolution of tracers for different atmospheric processes and the effects of atmospheric pollution on human health. However, measuring PM mass requires a constant control of the laboratory conditions due to its capacity to absorb humidity. For this reason, this study was focused on developing a novel, simple and precise methodology to determine the corrections of the filter mass due to humidity changes. The control and corrections are possible using a "control filter", which is always adapted to the environmental conditions of the laboratory. To check the consistency of this method, it was proved that the mass of any problem filter and that of the control filter behave in a very similar way. This allows quantifying the mass changes of any problem filter by using the control filter, where the problem filters and the control filter must have the same chemical composition and dimensions. To validate this methodology, a comparison was made between the methodology proposed in this study (Method-1) and the one proposed by the EPA (Method-2), which is generally applied. The particulate matter mass (m) was obtained for a problem filter for different weights, achieving similar values using both methods. However, Method-1 still provided reliable mass measurements for relative humidities very different from 50%, even as low as 18%. It was also proved that the adsorption or loss of water by the particulate matter can be neglected, since m is much smaller than the blank filter mass. Method-1 was also employed in several samplings carried out using three PM₁₀ samplers to determine contaminants, such as ⁷Be and ²¹⁰Pb, obtaining a good agreement between all particulate masses and activities measured by the three samplers for all samplings.