Heterologous expression of NoxA confers aerotolerance in Clostridium sporogenes

Clostridium is a genus of gram-positive obligate anaerobic bacteria. Some species of Clostridium, including Clostridium sporogenes, may be of use in bacteria-mediated cancer therapy. Spores of Clostridium are inert in healthy normoxic tissue but germinate when in the hypoxic regions of solid tumors, causing tumor regression. However, such treatments fail to completely eradicate tumors partly because of higher oxygen levels at the tumor's outer rim. In this study, we demonstrate that a degree of aerotolerance can be introduced to C. sporogenes by transfer of the noxA gene from Clostridium aminovalericum. NoxA is a water-forming NADH oxidase enzyme, and so has no detrimental effect on cell viability. In addition to its potential in cancer treatment, the noxA-expressing strain described here could be used to alleviate challenges related to oxygen sensitivity of C. sporogenes in biomanufacturing.

Decontamination of high-touch environmental surfaces (HITES) by wiping: quantitative assessment of a carrier platform simulating pathogen removal, inactivation and transfer in the field

We report here a carrier platform (Teflon; 30.0 × 60.0 × 0.9 cm) and a carrier retrieval device to assess pathogen decontamination of high-touch environmental surfaces (HITES) by wiping. Each one of the nine metallic disks (1 cm diameter and 0.7 mm thick) received 10 μL of the microbial suspension in a soil load, the inocula dried and the platform then wiped with a piece of fabric presoaked in a control or disinfectant fluid; the used wipe was immediately applied on a second platform with sterile disks to assess microbial transfer. Each test and control disk from a given platform was separately and simultaneously retrieved into 10 mL of an eluent/neutralizer for assays at the end of the contact time (total of 5 min, starting from the beginning of the wiping). Staphylococcus aureus and Acinetobacter baumannii were used as representative HITES-borne pathogens. The wipes tested separately contained 0.26% of a quaternary ammonium compound (Product A), and 250 ppm sodium hypochlorite at neutral pH (Product B). The control fabric (Product C) was dampened with a buffer containing a detergent. Product A achieved a >4 log10 (>99.99%) reduction in the viability of the bacteria on wiping with a barely detectable level of transfer of CFUs to clean disks. Product B achieved a >2 log10 (>99.00%) reduction in the viability of the test microbes while transferring a higher level of CFUs as compared to Product A. With Product C, there was a <1 log10 (<86.2%) reduction in the viability of the test microbes while transferring >1% of the contamination.

Direct and quantitative capture of viable bacteriophages from experimentally contaminated indoor air: A model for the study of airborne vertebrate viruses including SARS-CoV-2

Aim

The air indoors has profound health implications as it can expose us to pathogens, allergens and particulates either directly or via contaminated surfaces. There is, therefore, an upsurge in marketing of air decontamination technologies, but with no proper validation of their claims. We addressed the gap through the construction and use of a versatile room‐sized (25 m³) chamber to study airborne pathogen survival and inactivation.

Methods and Results

Here, we report on the quantitative recovery and detection of an enveloped (Phi6) and a non‐enveloped bacteriophage (MS2). The two phages, respectively, acted as surrogates for airborne human pathogenic enveloped (e.g., influenza, Ebola and coronavirus SARS‐CoV‐2) and non‐enveloped (e.g., norovirus) viruses from indoor air deposited directly on the lawns of their respective host bacteria using a programmable slit‐to‐agar air sampler. Using this technique, two different devices based on HEPA filtration and UV light were tested for their ability to decontaminate indoor air. This safe, relatively simple and inexpensive procedure augments the use of phages as surrogates for the study of airborne human and animal pathogenic viruses.

Conclusions

This simple, safe and relatively inexpensive method of direct recovery and quantitative detection of viable airborne phage particles can greatly enhance their applicattion as surrogates for the study of vertebrate virus survival in indoor air and assessment of technologies for their decontamination.

Significance and Impact of the Study

The safe, economical and simple technique reported here can be applied widely to investigate the role of indoor air for virus survival and transmission and also to assess the potential of air decontaminating technologies.

Development and application of DNA-aptamer-coupled magnetic beads and aptasensors for the detection of Cryptosporidium parvum oocysts in drinking and recreational water resources

Environmentally stable and disinfectant-resistant oocysts of Cryptosporidium spp. shed in the feces of infected humans and animals frequently contaminate water resources and are subsequently spread via potable and recreational waters. The current monoclonal-antibody-based methods for detecting them in water are slow, labor-intensive, and demand skills to interpret the results. We have developed DNA-aptamer-based aptasensors, coupled with magnetic beads, to detect and identify the oocysts of C. parvum for monitoring recreational and drinking water sources. A sensitive and specific electrochemical aptasensor (3'-biotinylated R4-6 aptamer) was used as a secondary ligand to bind the streptavidin-coated magnetic beads. This was incorporated into a probe using gold nanoparticle modified screen-printed carbon electrodes. Square wave voltammetry allowed for specific recognition of C. parvum oocysts. The aptamer-coated probes had an oocyst detection limit of 50. It did not bind to the cysts of Giardia duodenalis, another common waterborne pathogen, thus indicating its high specificity for the target pathogen. The system could successfully detect C. parvum oocysts in spiked samples of the raw lake and river waters. Therefore, the combined use of the aptasensor and magnetic beads has the potential to monitor water quality for C. parvum oocysts in field samples without relying on monoclonal antibodies and skill-demanding microscopy.

A quantitative method to assess the role of indoor air decontamination to simultaneously reduce contamination of environmental surfaces: testing with vegetative and spore-forming bacteria

Indoor air can spread pathogens, which can be removed/inactivated by a variety of means in healthcare and other settings. We quantitatively assessed if air decontamination could also simultaneously reduce environmental surface contamination in the same setting. Two types of vegetative bacteria (Staphylococcus aureus and Acinetobacter baumannii), and a bacterial spore-former (Geobacillus stearothermophilus) were tested as representative airborne bacteria. They were separately aerosolized with a Collison nebulizer into a 24-m³ aerobiology chamber and air samples collected with a programmable slit-to-agar sampler. Settling airborne particles were collected on culture plates placed at, and collected from, five different locations on the floor of the chamber with a custom-built remote plate-placement and -retriever system. Experimentally contaminated air in the chamber was decontaminated for 45 min with a device based on HEPA filtration and UV light. The plates were incubated and CFU counted. The device reduced the viability levels of all tested bacteria in the air by >3 log₁₀ (>99·9%) in 45 min. Based on two separate tests, the average reductions in surface contamination for S. aureus, A. baumannii and G. stearothermophilus were respectively, 97, 87 and 97%. We thus showed that air decontamination could substantially and simultaneously reduce the levels of surface contamination in the same setting irrespective of the type of pathogen present. SIGNIFICANCE AND IMPACT OF THE STUDY: The innovative and generic test protocol described can quantitatively assess the reduction in environmental surface contamination from microbial decontamination of indoor air in the same setting. This added advantage from air decontamination has implications for infection prevention and control in healthcare and other settings without the need for additional expense or effort. Continuous operation of an air decontamination device, such as the one tested here, can lead to ongoing reductions in pathogens in air and on environmental surfaces.

Decontamination of indoor air to reduce the risk of airborne infections: Studies on survival and inactivation of airborne pathogens using an aerobiology chamber

BACKGROUND

Although indoor air can spread many pathogens, information on the airborne survival and inactivation of such pathogens remains sparse.

METHODS

Staphylococcus aureus and Klebsiella pneumoniae were nebulized separately into an aerobiology chamber (24.0 m³). The chamber's relative humidity and air temperature were at 50% ± 5% and 20°C ± 2°C, respectively. The air was sampled with a slit-to-agar sampler. Between tests, filtered air purged the chamber of any residual airborne microbes.

RESULTS

The challenge in the air varied between 4.2 log₁₀ colony forming units (CFU)/m³ and 5.0 log₁₀ CFU/m³, sufficient to show a ≥3 log₁₀ (≥99.9%) reduction in microbial viability in air over a given contact time by the technologies tested. The rates of biologic decay of S aureus and K pneumoniae were 0.0064 ± 0.00015 and 0.0244 ± 0.009 log₁₀ CFU/m³/min, respectively. Three commercial devices, with ultraviolet light and HEPA (high-efficiency particulate air) filtration, met the product efficacy criterion in 45-210 minutes; these rates were statistically significant compared with the corresponding rates of biologic decay of the bacteria. One device was also tested with repeated challenges with aerosolized S aureus to simulate ongoing fluctuations in indoor air quality; it could reduce each such recontamination to an undetectable level in approximately 40 minutes.

CONCLUSIONS

The setup described is suitable for work with all major classes of pathogens and also complies with the U.S. Environmental Protection Agency's guidelines (2012) for testing air decontamination technologies.

Generic aspects of the airborne spread of human pathogens indoors and emerging air decontamination technologies

•

Indoor air is an important vehicle for a variety of human pathogens.

•

Review of airborne transmission of infectious agents from experimental and field studies, predisposing to establish air-surface-air nexus and possible ways of transmission to susceptible hosts.

•

An overview of the methods for experimentally generating and recovering airborne human pathogens and environmental factors affecting their survival in air.

•

Current and emerging technologies for decontamination of indoor air for human pathogens.

•

Design, establishment, and validation of a room-size aerobiology chamber meeting the U.S. Environmental Protection Agency guidelines (2012) that can be used for assessment of air-decontamination technologies.

Indoor air can be an important vehicle for a variety of human pathogens. This review provides examples of airborne transmission of infectious agents from experimental and field studies and discusses how airborne pathogens can contaminate other parts of the environment to give rise to secondary vehicles leading air-surface-air nexus with possible transmission to susceptible hosts. The following groups of human pathogens are covered because of their known or potential airborne spread: vegetative bacteria (staphylococci and legionellae), fungi (Aspergillus, Penicillium, and Cladosporium spp and Stachybotrys chartarum), enteric viruses (noro- and rotaviruses), respiratory viruses (influenza and coronaviruses), mycobacteria (tuberculous and nontuberculous), and bacterial spore formers (Clostridium difficile and Bacillus anthracis). An overview of methods for experimentally generating and recovering airborne human pathogens is included, along with a discussion of factors that influence microbial survival in indoor air. Available guidelines from the U.S. Environmental Protection Agency and other global regulatory bodies for the study of airborne pathogens are critically reviewed with particular reference to microbial surrogates that are recommended. Recent developments in experimental facilities to contaminate indoor air with microbial aerosols are presented, along with emerging technologies to decontaminate indoor air under field-relevant conditions. Furthermore, the role that air decontamination may play in reducing the contamination of environmental surfaces and its combined impact on interrupting the risk of pathogen spread in both domestic and institutional settings is discussed.

Fast and efficient removal of mercury from water samples using magnetic iron oxide nanoparticles modified with 2-mercaptobenzothiazole

Mercury in the lowest levels of concentrations is dangerous for human health due to its bioaccumulation in body and toxicity. This investigation shows the effective removal of mercury (II) ions from contaminated surface waters by modified magnetic iron oxide nanoparticles (M-MIONPs) with 2-mercaptobenzothiazole as an efficient adsorbent. The proposed method is fast, simple, cheap, effective and safe for treatment of mercury polluted waters. Preparation of adsorbent is easy and removal time is short. Non-modified magnetic iron oxide nanoparticles (MIONPs) can adsorb up to 43.47% of 50 ngmL(-1) of Hg (II) ions from polluted water, but modified magnetic ironoxide nanoparticles (M-MIONPs) improved the efficiency up to 98.6% for the same concentration. The required time for complete removal of mercury ions was 4 min. Variation of pH and high electrolyte concentration (NaCl) of the solution do not have considerable effect on the mercury removal efficiency. Loading capacity of adsorbent for Hg ions is obtained to be 590 μgg(-1).

Fast removal and recovery of amaranth by modified iron oxide magnetic nanoparticles

The adsorption and removal of amaranth (AM) from an aqueous solution by iron oxide nanoparticles (IONPs) coated with cetyltrimethylammonium bromide (CTAB) as adsorbent was reported. The novel magnetic separation was quite efficient for the adsorption and desorption of AM. In an aqueous solution of AM at 25 degrees C, the adsorption data could be fitted by the Langmuir equation with a maximum adsorption amount of 1.05 mg mg(-1) and a Langmuir adsorption equilibrium constant of 0.90 Lmg(-1). The effect of temperature, pH of aqueous medium, electrolyte concentration, composition of desorbent solvent and interfering ions on the recovery process were also investigated. Methanol was used for desorption of adsorbed AM. Due to the absence of internal diffusion resistance both adsorption and desorption of AM were fast and could be completed within 5 min. The results indicated that the CTAB-coated IONPs could be employed in the removal of the anionic dye from wastewater. The AM was removed successfully in spiked samples of Karoon River water.