Spatially controlled diffusion range of tumor-associated angiogenic factors to develop a tumor model using a microfluidic resistive circuit

Developing a tumor model with vessels has been a challenge in microfluidics. This difficulty is because cancer cells can overgrow in a co-culture system. The up-regulation of anti-angiogenic factors during the initial tumor development can hinder neovascularization. The standard method is to develop a quiescent vessel network before loading a tumor construct in an adjacent chamber, which simulates the interaction between a tumor and its surrounding vessels. Here, we present a new method that allows a vessel network and a tumor to develop simultaneously in two linked chambers. The physiological environment of these two chambers is controlled by a microfluidic resistive circuit using two symmetric long microchannels. Applying the resistive circuit, a diffusion-dominated environment with a small 2-D pressure gradient is created across the two chambers with velocity <10.9 nm s-1 and Péclet number <6.3 × 10-5. This 2-D pressure gradient creates a V-shaped velocity clamp to confine the tumor-associated angiogenic factors at pores between the two chambers, and it has two functions. At the early stage, vasculogenesis is stimulated to grow a vessel network in the vessel chamber with minimal influence from the tumor that is still developed in the adjacent chamber. At the post-tumor-development stage, the induced steep concentration gradient at pores mimics vessel-tumor interactions to stimulate angiogenesis to grow vessels toward the tumor. Applying this method, we demonstrate that vasculogenic vessels can grow first, followed by stimulating angiogenesis. Angiogenic vessels can grow into stroma tissue up to 1.3 mm long, and vessels can also grow into or wrap around a 625 μm tumor spheroid or a tumor tissue developed from a cell suspension. In summary, our study suggests that the interactions between a developing vasculature and a growing tumor must be controlled differently throughout the tissue development process, including at the early stage when vessels are still forming and at the later stage when the tumor needs to interact with the vessels.

Origin of outer tropical cyclone rainbands

Outer tropical cyclone rainbands (TCRs) are a concentrated region of heavy precipitation and hazardous weather within tropical cyclones (TCs). Outer TCRs pose considerable risk to human societies, but their origin remains unresolved. Here, we identify a total of 1029 outer TCRs at their formative stage from 95 TCs and present a large collection of radar observations in order to establish a robust foundation of the natural diversity of rainband origin. The results show the dominance of outer origin for the observed outer TCRs, in distinct contrast to theoretical modeling works of outer TCRs, which propose inner-origin scenarios. Our analysis also suggests that squall-line dynamics are a common, but not the sole, mechanism responsible for outer TCR formation. The nature of preexisting outer precipitation is found to be an important factor to influence the squall-line and non-squall-line outer TCR initiation.

The Potential of Ultrasound Radiomics in Carpal Tunnel Syndrome Diagnosis: A Systematic Review and Meta-Analysis

Background: Carpal tunnel syndrome (CTS) is the most common entrapment neuropathy for which ultrasound imaging has recently emerged as a valuable diagnostic tool. This meta-analysis aims to investigate the role of ultrasound radiomics in the diagnosis of CTS and compare it with other diagnostic approaches. Methods: We conducted a comprehensive search of electronic databases from inception to September 2023. The included studies were assessed for quality using the Quality Assessment Tool for Diagnostic Accuracy Studies. The primary outcome was the diagnostic performance of ultrasound radiomics compared to radiologist evaluation for diagnosing CTS. Results: Our meta-analysis included five observational studies comprising 840 participants. In the context of radiologist evaluation, the combined statistics for sensitivity, specificity, and diagnostic odds ratio were 0.78 (95% confidence interval (CI), 0.71 to 0.83), 0.72 (95% CI, 0.59 to 0.81), and 9 (95% CI, 5 to 15), respectively. In contrast, the ultrasound radiomics training mode yielded a combined sensitivity of 0.88 (95% CI, 0.85 to 0.91), a specificity of 0.88 (95% CI, 0.84 to 0.92), and a diagnostic odds ratio of 58 (95% CI, 38 to 87). Similarly, the ultrasound radiomics testing mode demonstrated an aggregated sensitivity of 0.85 (95% CI, 0.78 to 0.89), a specificity of 0.80 (95% CI, 0.73 to 0.85), and a diagnostic odds ratio of 22 (95% CI, 12 to 41). Conclusions: In contrast to assessments by radiologists, ultrasound radiomics exhibited superior diagnostic performance in detecting CTS. Furthermore, there was minimal variability in the diagnostic accuracy between the training and testing sets of ultrasound radiomics, highlighting its potential as a robust diagnostic tool in CTS.

Biophysical Electrical and Mechanical Stimulations for Promoting Chondrogenesis of Stem Cells on PEDOT:PSS Conductive Polymer Scaffolds

The investigation of the effects of electrical and mechanical stimulations on chondrogenesis in tissue engineering scaffolds is essential for realizing successful cartilage repair and regeneration. The aim of articular cartilage tissue engineering is to enhance the function of damaged or diseased articular cartilage, which has limited regenerative capacity. Studies have shown that electrical stimulation (ES) promotes mesenchymal stem cell (MSC) chondrogenesis, while mechanical stimulation (MS) enhances the chondrogenic differentiation capacity of MSCs. Therefore, understanding the impact of these stimuli on chondrogenesis is crucial for researchers to develop more effective tissue engineering strategies for cartilage repair and regeneration. This study focuses on the preparation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) conductive polymer (CP) scaffolds using the freeze-drying method. The scaffolds were fabricated with varying concentrations (0, 1, 3, and 10 wt %) of (3-glycidyloxypropyl) trimethoxysilane (GOPS) as a crosslinker and an additive to tailor the scaffold properties. To gain a comprehensive understanding of the material characteristics and the phase aggregation phenomenon of PEDOT:PSS scaffolds, the researchers performed theoretical calculations of solubility parameters and surface energies of PSS, PSS-GOPS, and PEDOT polymers, as well as conducted material analyses. Additionally, the study investigated the potential of promoting chondrogenic differentiation of human adipose stem cells by applying external ES or MS on a PEDOT:PSS CP scaffold. Compared to the group without stimulation, the group that underwent stimulation exhibited significantly up-regulated expression levels of chondrogenic characteristic genes, such as SOX9 and COL2A1. Moreover, the immunofluorescence staining images exhibited a more vigorous fluorescence intensity of SOX9 and COL II proteins that was consistent with the trend of the gene expression results. In the MS experiment, the strain excitation exerted on the scaffold was simulated and transformed into stress. The simulated stress response showed that the peak gradually decreased with time and approached a constant value, with the negative value of stress representing the generation of tensile stress. This stress response quantification could aid researchers in determining specific MS conditions for various materials in tissue engineering, and the applied stress conditions could be further optimized. Overall, these findings are significant contributions to future research on cartilage repair and biophysical ES/MS in tissue engineering.

Deep learning algorithm for predicting subacromial motion trajectory: Dynamic shoulder ultrasound analysis

Subacromial motion metrics can be extracted from dynamic shoulder ultrasonography, which is useful for identifying abnormal motion patterns in painful shoulders. However, frame-by-frame manual labeling of anatomical landmarks in ultrasound images is time consuming. The present study aims to investigate the feasibility of a deep learning algorithm for extracting subacromial motion metrics from dynamic ultrasonography. Dynamic ultrasound imaging was retrieved by asking 17 participants to perform cyclic shoulder abduction and adduction along the scapular plane, whereby the trajectory of the humeral greater tubercle (in relation to the lateral acromion) was depicted by the deep learning algorithm. Extraction of the subacromial motion metrics was conducted using a convolutional neural network (CNN) or a self-transfer learning-based (STL)-CNN with or without an autoencoder (AE). The mean absolute error (MAE) compared with the manually-labeled data (ground truth) served as the main outcome variable. Using eight-fold cross-validation, the average MAE was proven to be significantly higher in the group using CNN than in those using STL-CNN or STL-CNN+AE for the relative difference between the greater tubercle and lateral acromion on the horizontal axis. The MAE for the localization of the two aforementioned landmarks on the vertical axis also seemed to be enlarged in those using CNN compared with those using STL-CNN. In the testing dataset, the errors in relation to the ground truth for the minimal vertical acromiohumeral distance were 0.081-0.333 cm using CNN, compared with 0.002-0.007 cm using STL-CNN. We successfully demonstrated the feasibility of a deep learning algorithm for automatic detection of the greater tubercle and lateral acromion during dynamic shoulder ultrasonography. Our framework also demonstrated the capability of capturing the minimal vertical acromiohumeral distance, which is the most important indicator of subacromial motion metrics in daily clinical practice.

Application of deep learning algorithms in automatic sonographic localization and segmentation of the median nerve: A systematic review and meta-analysis

OBJECTIVE

High-resolution ultrasound is an emerging tool for diagnosing carpal tunnel syndrome caused by the compression of the median nerve at the wrist. This systematic review and meta-analysis aimed to explore and summarize the performance of deep learning algorithms in the automatic sonographic assessment of the median nerve at the carpal tunnel level.

METHODS

PubMed, Medline, Embase, and Web of Science were searched from the earliest records to May 2022 for studies investigating the utility of deep neural networks in the evaluation of the median nerve in carpal tunnel syndrome. The quality of the included studies was evaluated using the Quality Assessment Tool for Diagnostic Accuracy Studies. The outcome variables included precision, recall, accuracy, F-score, and Dice coefficient.

RESULTS

In total, seven articles were included, comprising 373 participants. The deep learning and related algorithms comprised U-Net, phase-based probabilistic active contour, MaskTrack, ConvLSTM, DeepNerve, DeepSL, ResNet, Feature Pyramid Network, DeepLab, Mask R-CNN, region proposal network, and ROI Align. The pooled values of precision and recall were 0.917 (95 % confidence interval [CI], 0.873-0.961) and 0.940 (95 % CI, 0.892-0.988), respectively. The pooled accuracy and Dice coefficient were 0.924 (95 % CI, 0.840-1.008) and 0.898 (95 % CI, 0.872-0.923), respectively, whereas the summarized F-score was 0.904 (95 % CI, 0.871-0.937).

CONCLUSION

The deep learning algorithm enables automated localization and segmentation of the median nerve at the carpal tunnel level in ultrasound imaging with acceptable accuracy and precision. Future research is expected to validate the performance of deep learning algorithms in detecting and segmenting the median nerve along its entire length as well as across datasets obtained from various ultrasound manufacturers.

Subacromial Motion Metrics in Painful Shoulder Impingement: A Dynamic Quantitative Ultrasonography Analysis

OBJECTIVES

To explore the subacromial motion metrics in patients with and without subacromial impingement syndrome (SIS) and to investigate whether the abnormality was associated with rotator cuff pathologies.

DESIGN

This cross-sectional observational study used dynamic quantitative ultrasonography imaging for shoulder joint assessment.

SETTING

Outpatient rehabilitation clinic.

PARTICIPANTS

Individuals with SIS on at least 1 shoulder (n=32) and asymptomatic controls (n=32) (N=64).

INTERVENTIONS

Not applicable.

MAIN OUTCOME MEASURES

Frame-by-frame, the humeral greater tuberosity against the lateral edge of the acromion was traced to obtain the minimal vertical acromiohumeral distance (AHD). The rotation angle and radius of the humerus were computed using the least-squares curve fitting method.

RESULTS

Approximately two-thirds of the shoulders with SIS did not have any sonographically identifiable rotator cuff pathologies. There was a consistent trend of nonsignificantly increased humeral rotation angles in painful shoulders. The generalized estimating equation demonstrated that the decreased minimal vertical AHD was associated with painful subacromial impingement (β coefficient: -0.123cm, 95% confidence interval [CI], -0.199 to -0.047). The area under the curve for the minimal vertical AHD to discriminate painful or impinged shoulders ranged from 0.624-0.676. The increased rotation angle (β coefficient: 10.516°; 95% CI, 3.103-17.929) and decreased rotation radius (β coefficient: -2.903cm; 95% CI, -5.693 to -0.111) were shown to be significantly related to the presence of supraspinatus tendinopathy.

CONCLUSIONS

Shoulders with SIS were characterized by a decreased minimal vertical AHD during dynamic examination. Abnormal subacromial metrics can develop in patients with mild (or no) rotator cuff pathologies. More prospective cohort studies are warranted to investigate the changes in subacromial motion metrics in populations at risk for painful or impinged shoulders.

Biomechanical Effects of Plastic Heel Cup on Plantar Fasciitis Patients Evaluated by Ultrasound Shear Wave Elastography

The plastic heel cup has been adopted to treat plantar heel problems for years. However, its mechanisms and biomechanical effects are yet to be fully understood. The purpose of this study was to investigate the effects of the plastic heel cup on the microchamber and macrochamber layers of the heel pad by comparing the stiffness (in terms of the shear wave speed) and thickness of these two layers with and without a plastic heel cup during static standing. Fifteen patients with unilateral plantar fasciitis were recruited. The shear wave speed and thickness of the microchamber and microchamber layers of each symptomatic heel pad during standing measured by ultrasound shear wave elastography were compared between conditions with and without a plastic heel cup. It was found that a plastic heel cup reduced the shear wave speed of the microchamber layer to 55.5% and increased its thickness to 137.5% compared with the condition without a plastic heel cup. For the microchamber layer, the shear wave speed was reduced to 89.7%, and thickness was increased to 113.6% compared with the condition without a plastic heel cup. The findings demonstrate that a plastic heel cup can help to reduce the stiffness and increase the thickness for both layers of the heel pad during standing, suggesting that the mechanism of a plastic heel cup, and its resulting biomechanical effect, is to reduce the internal stress of the heel pad by increasing its thickness through confinement.

Quantitative Analysis of Dynamic Subacromial Ultrasonography: Reliability and Influencing Factors

Objective: Current imaging methods used to examine patients with subacromial impingement syndrome (SIS) are limited by their semi-quantitative nature and their capability of capturing dynamic movements. This study aimed to develop a quantitative analytic model to assess subacromial motions using dynamic ultrasound and to examine their reliability and potential influencing factors.

Method: We included 48 healthy volunteers and examined their subacromial motions with dynamic ultrasound imaging. The parameters were the minimal vertical acromiohumeral distance, rotation radius, and degrees of the humeral head. The generalized estimating equation (GEE) was used to investigate the impact of different shoulder laterality, postures, and motion phases on the outcome.

Result: Using the data of the minimal vertical acromiohumeral distance, the intra-rater and inter-rater reliabilities (intra-class correlation coefficient) were determined as 0.94 and 0.88, respectively. In the GEE analysis, a decrease in the minimal vertical acromiohumeral distance was associated with the abduction phase and full-can posture, with a beta coefficient of −0.02 cm [95% confidence interval (CI), −0.03 to −0.01] and −0.07 cm (95% CI, −0.11 to −0.02), respectively. The abduction phase led to a decrease in the radius of humeral rotation and an increase in the angle of humeral rotation, with a beta coefficient of −1.28 cm (95% CI, −2.16 to −0.40) and 6.60° (95% CI, 3.54–9.67), respectively. A significant negative correlation was observed between the rotation angle and radius of the humeral head and between the rotation angle and the minimal vertical acromiohumeral distance.

Conclusion: Quantitative analysis of dynamic ultrasound imaging enables the delineation of subacromial motion with good reliability. The vertical acromiohumeral distance is the lowest in the abduction phase and full-can posture, and the rotation angle of the humeral head has the potential to serve as a new parameter for the evaluation of SIS.

Rational design of a highly porous electronic scaffold with concurrent enhancement in cell behaviors and differentiation under electrical stimulation

Conductive polymers (CPs) have received increasing attention as promising materials for studying electrophysiological signals in cell and tissue engineering. The combination of CPs with electrical stimulation (ES) could possibly enhance neurogenesis, osteogenesis, and myogenesis. To date, research has been prioritized on capitalizing CPs as two-dimensional (2D) structures for guiding the differentiation. In contrast, relatively little is conducted on the implementation of 3D conductive scaffolds. In this research, we report the synergic assembly of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and multi-walled carbon nanotubes (MWCNTs) as a biocompatible, electrically conductive, mechanically robust and structurally porous 3D scaffold. To showcase the bioelectronic utilization, a proof-of-concept demonstration of electrically stimulated cell culture under ES is conducted. The ES effects coupled with the 3D scaffold are promising on pheochromocytoma 12 (PC12), a neuronal cell line, and the ES effect on osteogenesis of human adipose-derived stem cells (hASC) was further studied. PC12 cultured on this PEDOT:PSS/MWCNT 3D scaffolds was induced to differentiate toward a more mature neuronal phenotype with the ES treatment. Furthermore, hASC osteogenesis could be highly promoted in this conductive scaffold with ES. Calcium deposition concentration and osteo-differentiated gene markers were significantly higher with ES. The facile assembly of 3D conductive scaffolds sheds light on both platforms for investigating the 3D microenvironment for electrophysiological simulation of cells and tissues under the ES treatment of in vivo tissue engineering.

Determining tolerance levels for quality assurance of 3D printed bolus for modulated arc radiotherapy of the nose

Given the existing literature on the subject, there is obviously a need for specific advice on quality assurance (QA) tolerances for departments using or implementing 3D printed bolus for radiotherapy treatments. With a view to providing initial suggested QA tolerances for 3D printed bolus, this study evaluated the dosimetric effects of changes in bolus geometry and density, for a particularly common and challenging clinical situation: specifically, volumetric modulated arc therapy (VMAT) treatment of the nose. Film-based dose verification measurements demonstrated that both the AAA and the AXB algorithms used by the Varian Eclipse treatment planning system (Varian Medical Systems, Palo Alto, USA) were capable of providing sufficiently accurate dose calculations to allow this planning system to be used to evaluate the effects of bolus errors on dose distributions from VMAT treatments of the nose. Thereafter, the AAA and AXB algorithms were used to calculate the dosimetric effects of applying a range of simulated errors to the design of a virtual bolus, to identify QA tolerances that could be used to avoid clinically significant effects from common printing errors. Results were generally consistent, whether the treatment target was superficial and treated with counter-rotating coplanar arcs or more-penetrating and treated with noncoplanar arcs, and whether the dose was calculated using the AAA algorithm or the AXB algorithm. The results of this study suggest the following QA tolerances are advisable, when 3D printed bolus is fabricated for use in photon VMAT treatments of the nose: bolus relative electron density variation within [Formula: see text] (although an action level at [Formula: see text] may be permissible); bolus thickness variation within [Formula: see text] mm (or 0.5 mm variation on opposite sides); and air gap between bolus and skin [Formula: see text] mm. These tolerances should be investigated for validity with respect to other treatment modalities and anatomical sites. This study provides a set of baselines for future comparisons and a useful method for identifying additional or alternative 3D printed bolus QA tolerances.

Search for Displaced Leptons in sqrt[s]=13 TeV pp Collisions with the ATLAS Detector

A search for charged leptons with large impact parameters using 139  fb^{-1} of sqrt[s]=13  TeV pp collision data from the ATLAS detector at the LHC is presented, addressing a long-standing gap in coverage of possible new physics signatures. Results are consistent with the background prediction. This search provides unique sensitivity to long-lived scalar supersymmetric lepton partners (sleptons). For lifetimes of 0.1 ns, selectron, smuon, and stau masses up to 720, 680, and 340  GeV, respectively, are excluded at 95% confidence level, drastically improving on the previous best limits from LEP.

Mechanical Properties of Compact Bone Defined by the Stress-Strain Curve Measured Using Uniaxial Tensile Test: A Concise Review and Practical Guide

Mechanical properties are crucial parameters for scaffold design for bone tissue engineering; therefore, it is important to understand the definitions of the mechanical properties of bones and relevant analysis methods, such that tissue engineers can use this information to properly design the mechanical properties of scaffolds for bone tissue engineering. The main purpose of this article is to provide a review and practical guide to understand and analyze the mechanical properties of compact bone that can be defined and extracted from the stress-strain curve measured using uniaxial tensile test until failure. The typical stress-strain curve of compact bone measured using uniaxial tensile test until failure is a bilinear, monotonically increasing curve. The associated mechanical properties can be obtained by analyzing this bilinear stress-strain curve. In this article, a computer programming code for analyzing the bilinear stress-strain curve of compact bone for quantifying the associated mechanical properties is provided, such that the readers can use this computer code to perform the analysis directly. In addition to being applied to compact bone, the information provided by this article can also be applied to quantify the mechanical properties of any material having a bilinear stress-strain curve, such as a whole bone, some metals and biomaterials. The information provided by this article can be applied by tissue engineers, such that they can have a reference to properly design the mechanical properties of scaffolds for bone tissue engineering. The information can also be applied by researchers in biomechanics and orthopedics to compare the mechanical properties of bones in different physiological or pathological conditions.

Longitudinal Flow Decorrelations in Xe+Xe Collisions at sqrt[s_{NN}]=5.44 TeV with the ATLAS Detector

The first measurement of longitudinal decorrelations of harmonic flow amplitudes v_{n} for n=2-4 in Xe+Xe collisions at sqrt[s_{NN}]=5.44  TeV is obtained using 3  μb^{-1} of data with the ATLAS detector at the LHC. The decorrelation signal for v_{3} and v_{4} is found to be nearly independent of collision centrality and transverse momentum (p_{T}) requirements on final-state particles, but for v_{2} a strong centrality and p_{T} dependence is seen. When compared with the results from Pb+Pb collisions at sqrt[s_{NN}]=5.02  TeV, the longitudinal decorrelation signal in midcentral Xe+Xe collisions is found to be larger for v_{2}, but smaller for v_{3}. Current hydrodynamic models reproduce the ratios of the v_{n} measured in Xe+Xe collisions to those in Pb+Pb collisions but fail to describe the magnitudes and trends of the ratios of longitudinal flow decorrelations between Xe+Xe and Pb+Pb. The results on the system-size dependence provide new insights and an important lever arm to separate effects of the longitudinal structure of the initial state from other early and late time effects in heavy-ion collisions.

Search for Dark Matter Produced in Association with a Dark Higgs Boson Decaying into W^{±}W^{∓} or ZZ in Fully Hadronic Final States from sqrt[s]=13 TeV pp Collisions Recorded with the ATLAS Detector

Several extensions of the Standard Model predict the production of dark matter particles at the LHC. An uncharted signature of dark matter particles produced in association with VV=W^{±}W^{∓} or ZZ pairs from a decay of a dark Higgs boson s is searched for using 139  fb^{-1} of pp collisions recorded by the ATLAS detector at a center-of-mass energy of 13 TeV. The s→V(qq[over ¯])V(qq[over ¯]) decays are reconstructed with a novel technique aimed at resolving the dense topology from boosted VV pairs using jets in the calorimeter and tracking information. Dark Higgs scenarios with m_{s}>160  GeV are excluded.

Medium-Induced Modification of Z-Tagged Charged Particle Yields in Pb+Pb Collisions at 5.02 TeV with the ATLAS Detector

The yield of charged particles opposite to a Z boson with large transverse momentum (p_{T}) is measured in 260  pb^{-1} of pp and 1.7  nb^{-1} of Pb+Pb collision data at 5.02 TeV per nucleon pair recorded with the ATLAS detector at the Large Hadron Collider. The Z boson tag is used to select hard-scattered partons with specific kinematics, and to observe how their showers are modified as they propagate through the quark-gluon plasma created in Pb+Pb collisions. Compared with pp collisions, charged-particle yields in Pb+Pb collisions show significant modifications as a function of charged-particle p_{T} in a way that depends on event centrality and Z boson p_{T}. The data are compared with a variety of theoretical calculations and provide new information about the medium-induced energy loss of partons in a p_{T} regime difficult to measure through other channels.

Observation and Measurement of Forward Proton Scattering in Association with Lepton Pairs Produced via the Photon Fusion Mechanism at ATLAS

The observation of forward proton scattering in association with lepton pairs (e^{+}e^{-}+p or μ^{+}μ^{-}+p) produced via photon fusion is presented. The scattered proton is detected by the ATLAS Forward Proton spectrometer, while the leptons are reconstructed by the central ATLAS detector. Proton-proton collision data recorded in 2017 at a center-of-mass energy of sqrt[s]=13  TeV are analyzed, corresponding to an integrated luminosity of 14.6  fb^{-1}. A total of 57 (123) candidates in the ee+p (μμ+p) final state are selected, allowing the background-only hypothesis to be rejected with a significance exceeding 5 standard deviations in each channel. Proton-tagging techniques are introduced for cross-section measurements in the fiducial detector acceptance, corresponding to σ_{ee+p}=11.0±2.6(stat)±1.2(syst)±0.3(lumi) and σ_{μμ+p}=7.2±1.6(stat)±0.9(syst)±0.2(lumi)  fb in the dielectron and dimuon channel, respectively.

Search for Heavy Resonances Decaying into a Photon and a Hadronically Decaying Higgs Boson in pp Collisions at sqrt[s]=13 TeV with the ATLAS Detector

This Letter presents a search for the production of new heavy resonances decaying into a Higgs boson and a photon using proton-proton collision data at sqrt[s]=13  TeV collected by the ATLAS detector at the LHC. The data correspond to an integrated luminosity of 139  fb^{-1}. The analysis is performed by reconstructing hadronically decaying Higgs boson (H→bb[over ¯]) candidates as single large-radius jets. A novel algorithm using information about the jet constituents in the center-of-mass frame of the jet is implemented to identify the two b quarks in the single jet. No significant excess of events is observed above the expected background. Upper limits are set on the production cross-section times branching fraction for narrow spin-1 resonances decaying into a Higgs boson and a photon in the resonance mass range from 0.7 to 4 TeV, cross-section times branching fractions are excluded between 11.6 fb and 0.11 fb at a 95% confidence level.

Search for Higgs Boson Decays into a Z Boson and a Light Hadronically Decaying Resonance Using 13 TeV pp Collision Data from the ATLAS Detector

A search for Higgs boson decays into a Z boson and a light resonance in two-lepton plus jet events is performed, using a pp collision dataset with an integrated luminosity of 139  fb^{-1} collected at sqrt[s]=13  TeV by the ATLAS experiment at the CERN LHC. The resonance considered is a light boson with a mass below 4 GeV from a possible extended scalar sector or a charmonium state. Multivariate discriminants are used for the event selection and for evaluating the mass of the light resonance. No excess of events above the expected background is found. Observed (expected) 95% confidence-level upper limits are set on the Higgs boson production cross section times branching fraction to a Z boson and the signal resonance, with values in the range 17-340 pb (16_{-5}^{+6}-320_{-90}^{+130}  pb) for the different light spin-0 boson mass and branching fraction hypotheses, and with values of 110 and 100 pb (100_{-30}^{+40} and 100_{-30}^{+40}  pb) for the η_{c} and J/ψ hypotheses, respectively.

[Interpretation for the group standards in the handling of accidental leak coronavirus disease 2019 sample]

Biosafety is an important guarantee of the new coronavirus laboratory test. The accident treatment of sample overflow and sprinkle is a necessary part of the emergency plan for testing activities. Beijing Preventive Medicine Association coordinated biosafety experts of COVID-19 laboratories from Beijing CDC, to write up "The standard for handling of accidents of corona virus disease 2019 sample (T/BPMA 0005-2020)" . The group standard was based on the guidelines of China and WHO, and combined with the practical experience of COVID-19 epidemic and the principle of "scientific, normative, applicable and feasible" . Through all kinds of risk Assessment, it included the spillover of samples caused by the packing of COVID-19 (highly pathogenic) samples, the overflow and sprinkle in the laboratory during the detection operation, and the spillage accident occurred during the transfer of samples in the same building. The standard could guide and standardize the handling methods of accidental overflow and sprinkle that may occur in the SARS-CoV-2 testing laboratories in the city.

Dijet Resonance Search with Weak Supervision Using sqrt[s]=13 TeV pp Collisions in the ATLAS Detector

This Letter describes a search for narrowly resonant new physics using a machine-learning anomaly detection procedure that does not rely on signal simulations for developing the analysis selection. Weakly supervised learning is used to train classifiers directly on data to enhance potential signals. The targeted topology is dijet events and the features used for machine learning are the masses of the two jets. The resulting analysis is essentially a three-dimensional search A→BC, for m_{A}∼O(TeV), m_{B},m_{C}∼O(100  GeV) and B, C are reconstructed as large-radius jets, without paying a penalty associated with a large trials factor in the scan of the masses of the two jets. The full run 2 sqrt[s]=13  TeV pp collision dataset of 139  fb^{-1} recorded by the ATLAS detector at the Large Hadron Collider is used for the search. There is no significant evidence of a localized excess in the dijet invariant mass spectrum between 1.8 and 8.2 TeV. Cross-section limits for narrow-width A, B, and C particles vary with m_{A}, m_{B}, and m_{C}. For example, when m_{A}=3  TeV and m_{B}≳200  GeV, a production cross section between 1 and 5 fb is excluded at 95% confidence level, depending on m_{C}. For certain masses, these limits are up to 10 times more sensitive than those obtained by the inclusive dijet search. These results are complementary to the dedicated searches for the case that B and C are standard model bosons.

Ramp-Creep Ultrasound Viscoelastography for Measuring Viscoelastic Parameters of Materials

Several ultrasound-based methods have been developed to evaluate the viscoelastic properties of materials. The purpose of this study is to introduce a novel viscoelastography method based on ultrasound acoustic radiation force for measuring the parameters relevant to the viscoelastic properties of materials, named ramp-creep ultrasound viscoelastography (RC viscoelastography). RC viscoelastography uses two different ultrasound excitation modes to cause ramp and creep strain responses in the material. By combining and analyzing the information obtained from these two modes of excitation, the viscoelastic parameters of the material can be quantitatively evaluated. Finite element computer simulation demonstrated that RC viscoelastography can accurately evaluate the viscoelastic parameters of the material, including the relaxation and creep time constants as well as the ratio of viscous fluids to solids in the material, except for the region near the top surface of the material. The novelty of RC viscoelastography is that there is no need to know the magnitude of acoustic radiation force and induced stress in the material in order to evaluate the viscoelastic parameters. In the future, experiments are necessary to test the performance of RC viscoelastography in real biomaterials and biological tissues.

CP Properties of Higgs Boson Interactions with Top Quarks in the tt[over ¯]H and tH Processes Using H→γγ with the ATLAS Detector

A study of the charge conjugation and parity (CP) properties of the interaction between the Higgs boson and top quarks is presented. Higgs bosons are identified via the diphoton decay channel (H→γγ), and their production in association with a top quark pair (tt[over ¯]H) or single top quark (tH) is studied. The analysis uses 139  fb^{-1} of proton-proton collision data recorded at a center-of-mass energy of sqrt[s]=13  TeV with the ATLAS detector at the Large Hadron Collider. Assuming a CP-even coupling, the tt[over ¯]H process is observed with a significance of 5.2 standard deviations. The measured cross section times H→γγ branching ratio is 1.64_{-0.36}^{+0.38}(stat)_{-0.14}^{+0.17}(sys)  fb, and the measured rate for tt[over ¯]H is 1.43_{-0.31}^{+0.33}(stat)_{-0.15}^{+0.21}(sys) times the Standard Model expectation. The tH production process is not observed and an upper limit on its rate of 12 times the Standard Model expectation is set. A CP-mixing angle greater (less) than 43 (-43)° is excluded at 95% confidence level.

Search for Heavy Higgs Bosons Decaying into Two Tau Leptons with the ATLAS Detector Using pp Collisions at sqrt[s]=13 TeV

A search for heavy neutral Higgs bosons is performed using the LHC Run 2 data, corresponding to an integrated luminosity of 139  fb^{-1} of proton-proton collisions at sqrt[s]=13  TeV recorded with the ATLAS detector. The search for heavy resonances is performed over the mass range 0.2-2.5 TeV for the τ^{+}τ^{-} decay with at least one τ-lepton decaying into final states with hadrons. The data are in good agreement with the background prediction of the standard model. In the M_{h}^{125} scenario of the minimal supersymmetric standard model, values of tanβ>8 and tanβ>21 are excluded at the 95% confidence level for neutral Higgs boson masses of 1.0 and 1.5 TeV, respectively, where tanβ is the ratio of the vacuum expectation values of the two Higgs doublets.

Measurement of the Lund Jet Plane Using Charged Particles in 13 TeV Proton-Proton Collisions with the ATLAS Detector

The prevalence of hadronic jets at the LHC requires that a deep understanding of jet formation and structure is achieved in order to reach the highest levels of experimental and theoretical precision. There have been many measurements of jet substructure at the LHC and previous colliders, but the targeted observables mix physical effects from various origins. Based on a recent proposal to factorize physical effects, this Letter presents a double-differential cross-section measurement of the Lund jet plane using 139  fb^{-1} of sqrt[s]=13  TeV proton-proton collision data collected with the ATLAS detector using jets with transverse momentum above 675 GeV. The measurement uses charged particles to achieve a fine angular resolution and is corrected for acceptance and detector effects. Several parton shower Monte Carlo models are compared with the data. No single model is found to be in agreement with the measured data across the entire plane.

0671 Combination Of Transoral Robotic Surgery And Oropharyngeal Myofunctional Therapeutic Training For Patients With Obstructive Sleep Apnea

Introduction

Obstructive Sleep Apnea (OSA) is a type of sleep disorder characterized by intermittent, partial or complete upper airway collapse. Mostly, moderate to severe OSA cases were recommended to treat with continuous positive airway pressure, however, some of them were withdrawn. Transoral robotic surgery (TORS) was considered for OSA patient with tongue base hypertrophy, but the success rate was only 66.9% and the symptoms might relapse because of aging and gaining weights. Myofunctional therapeutic training (MFTT) was also an alternative treatment for patients with mild to moderate OSA. In our study, we investigated the effect of TORS surgery and oropharyngeal MFTT for OSA patients.

Methods

Seven adult patients were recruited, who were newly diagnosed with moderate to severe OSA (Apnea-hypopnea Index, AHI, 49.8±27.7/h). Polysomnography, questionnaire (Pittsburgh sleep quality index, PSQI; Snore Outcomes Survey, SOS), and the muscle strengths over tongue and jaw-opening were assessed before TORS surgery, 6-week and 18-week after surgery. The components of MFTT program involved jaw opening, tongue protrusion, tongue left, tongue right, tongue up and tongue down. It began at 6th week after surgery and these patients underwent 12 weeks of the home-based oropharyngeal MFTT. During the training intervention period, subjects were interviewed every week for adjusting the treatment intensity.

Results

Mean age was 45.9 years old (SD 9.8) and body mass index (BMI) was 26.6 (SD 3.6). After combination treatment of TORS surgery and MFTT, AHI-supine was significantly decreased from 66.3/h to 26.8/h (p&lt;0.05). PSQI and SOS scores were significantly improved (-2.1, 28.8, respectively). Compared with different components of MFTT program, muscle strength of tongue protrusion was the only significant predictor of AHI-supine reduction.

Conclusion

Our study presented that combination of TORS surgery and oropharyngeal MFTT could improve OSA severity and symptoms.

Support

This work was supported by National Cheng-Kung University Hospital (grant number NCKUH-10802018).

Measurement of Azimuthal Anisotropy of Muons from Charm and Bottom Hadrons in pp Collisions at sqrt[s]=13 TeV with the ATLAS Detector

The elliptic flow of muons from the decay of charm and bottom hadrons is measured in pp collisions at sqrt[s]=13  TeV using a data sample with an integrated luminosity of 150  pb^{-1} recorded by the ATLAS detector at the LHC. The muons from heavy-flavor decay are separated from light-hadron decay muons using momentum imbalance between the tracking and muon spectrometers. The heavy-flavor decay muons are further separated into those from charm decay and those from bottom decay using the distance-of-closest-approach to the collision vertex. The measurement is performed for muons in the transverse momentum range 4-7 GeV and pseudorapidity range |η|<2.4. A significant nonzero elliptic anisotropy coefficient v_{2} is observed for muons from charm decays, while the v_{2} value for muons from bottom decays is consistent with zero within uncertainties.

Search for Magnetic Monopoles and Stable High-Electric-Charge Objects in 13 Tev Proton-Proton Collisions with the ATLAS Detector

A search for magnetic monopoles and high-electric-charge objects is presented using 34.4  fb^{-1} of 13 TeV pp collision data collected by the ATLAS detector at the LHC during 2015 and 2016. The considered signature is based upon high ionization in the transition radiation tracker of the inner detector associated with a pencil-shape energy deposit in the electromagnetic calorimeter. The data were collected by a dedicated trigger based on the tracker high-threshold hit capability. The results are interpreted in models of Drell-Yan pair production of stable particles with two spin hypotheses (0 and 1/2) and masses ranging from 200 to 4000 GeV. The search improves by approximately a factor of 5 the constraints on the direct production of magnetic monopoles carrying one or two Dirac magnetic charges and stable objects with electric charge in the range 20≤|z|≤60 and extends the charge range to 60<|z|≤100.

Observation of Electroweak Production of a Same-Sign W Boson Pair in Association with Two Jets in pp Collisions at sqrt[s]=13 TeV with the ATLAS Detector

This Letter presents the observation and measurement of electroweak production of a same-sign W boson pair in association with two jets using 36.1  fb^{-1} of proton-proton collision data recorded at a center-of-mass energy of sqrt[s]=13  TeV by the ATLAS detector at the Large Hadron Collider. The analysis is performed in the detector fiducial phase-space region, defined by the presence of two same-sign leptons, electron or muon, and at least two jets with a large invariant mass and rapidity difference. A total of 122 candidate events are observed for a background expectation of 69±7 events, corresponding to an observed signal significance of 6.5 standard deviations. The measured fiducial signal cross section is σ^{fid}=2.89_{-0.48}^{+0.51}(stat)_{-0.28}^{+0.29}(syst)  fb.

Observation of Light-by-Light Scattering in Ultraperipheral Pb+Pb Collisions with the ATLAS Detector

This Letter describes the observation of the light-by-light scattering process, γγ→γγ, in Pb+Pb collisions at sqrt[s_{NN}]=5.02  TeV. The analysis is conducted using a data sample corresponding to an integrated luminosity of 1.73  nb^{-1}, collected in November 2018 by the ATLAS experiment at the LHC. Light-by-light scattering candidates are selected in events with two photons produced exclusively, each with transverse energy E_{T}^{γ}>3  GeV and pseudorapidity |η_{γ}|<2.4, diphoton invariant mass above 6 GeV, and small diphoton transverse momentum and acoplanarity. After applying all selection criteria, 59 candidate events are observed for a background expectation of 12±3 events. The observed excess of events over the expected background has a significance of 8.2 standard deviations. The measured fiducial cross section is 78±13(stat)±7(syst)±3(lumi)  nb.

Comparison of Fragmentation Functions for Jets Dominated by Light Quarks and Gluons from pp and Pb+Pb Collisions in ATLAS

Charged-particle fragmentation functions for jets azimuthally balanced by a high-transverse-momentum, prompt, isolated photon are measured in 25  pb^{-1} of pp and 0.49  nb^{-1} of Pb+Pb collision data at 5.02 TeV per nucleon pair recorded with the ATLAS detector at the Large Hadron Collider. The measurements are compared to predictions of Monte Carlo generators and to measurements of inclusively selected jets. In pp collisions, a different jet fragmentation function in photon-tagged events from that in inclusive jet events arises from the difference in fragmentation between light quarks and gluons. The ratios of the fragmentation functions in Pb+Pb events to that in pp events are used to explore the parton color-charge dependence of jet quenching in the hot medium. In relatively peripheral collisions, fragmentation functions exhibit a similar modification pattern for photon-tagged and inclusive jets. However, photon-tagged jets are observed to have larger modifications than inclusive jets in central Pb+Pb events.

Combination of Searches for Invisible Higgs Boson Decays with the ATLAS Experiment

Dark matter particles, if sufficiently light, may be produced in decays of the Higgs boson. This Letter presents a statistical combination of searches for H→invisible decays where H is produced according to the standard model via vector boson fusion, Z(ℓℓ)H, and W/Z(had)H, all performed with the ATLAS detector using 36.1  fb^{-1} of pp collisions at a center-of-mass energy of sqrt[s]=13  TeV at the LHC. In combination with the results at sqrt[s]=7 and 8 TeV, an exclusion limit on the H→invisible branching ratio of 0.26(0.17_{-0.05}^{+0.07}) at 95% confidence level is observed (expected).

Search for the Production of a Long-Lived Neutral Particle Decaying within the ATLAS Hadronic Calorimeter in Association with a Z Boson from pp Collisions at sqrt[s]=13 TeV

This Letter presents a search for the production of a long-lived neutral particle (Z_{d}) decaying within the ATLAS hadronic calorimeter, in association with a standard model (SM) Z boson produced via an intermediate scalar boson, where Z→ℓ^{+}ℓ^{-} (ℓ=e, μ). The data used were collected by the ATLAS detector during 2015 and 2016 pp collisions with a center-of-mass energy of sqrt[s]=13  TeV at the Large Hadron Collider and correspond to an integrated luminosity of 36.1±0.8  fb^{-1}. No significant excess of events is observed above the expected background. Limits on the production cross section of the scalar boson times its decay branching fraction into the long-lived neutral particle are derived as a function of the mass of the intermediate scalar boson, the mass of the long-lived neutral particle, and its cτ from a few centimeters to one hundred meters. In the case that the intermediate scalar boson is the SM Higgs boson, its decay branching fraction to a long-lived neutral particle with a cτ approximately between 0.1 and 7 m is excluded with a 95% confidence level up to 10% for m_{Z_{d}} between 5 and 15 GeV.

Narrowband Shear Wave Generation Using Sinusoidally Modulated Acoustic Radiation Force

Most transient ultrasound elastography methods use high-intensity ultrasound "push" pulses that generate a shear wave with a wide frequency spectrum. However, it is difficult to control how the energy of the wave is distributed within that spectrum. For this reason, the shear-wave group velocity may not match that of harmonic methods like magnetic resonance elastography (MRE). The objective of this study was to introduce a narrowband shear wave generation method produced by "push" pulses with sinusoidally modulated intensity. The method, named harmonic shear wave imaging (HSWI), successively transmits a series of push pulses with a periodic change in duration. The excited shear waves form a continuous shear wave with a known main frequency that can be controlled by the user. Push pulses are interleaved with imaging pulses so only one clinical transducer is used to generate and record the shear waves. The proposed method was compared to MRE and a transient shear wave elastography method using phantoms and in vivo measurements. It was found that HSWI produces narrowband waves with a speed that closely matches that measured by MRE. Measurement of the acoustic output parameters indicated that the acoustic intensities in HSWI are suitable for clinical applications. The ability of HSWI to generate narrowband shear waves using a single linear array transducer makes it amenable for clinical translation. HSWI can potentially use the same thresholds as MRE for diagnosis of diseases affecting the stiffness of soft tissues.

Combination of the Searches for Pair-Produced Vectorlike Partners of the Third-Generation Quarks at sqrt[s]=13 TeV with the ATLAS Detector

A combination of the searches for pair-produced vectorlike partners of the top and bottom quarks in various decay channels (T→Zt/Wb/Ht, B→Zb/Wt/Hb) is performed using 36.1  fb^{-1} of pp collision data at sqrt[s]=13  TeV with the ATLAS detector at the Large Hadron Collider. The observed data are found to be in good agreement with the standard model background prediction in all individual searches. Therefore, combined 95% confidence-level upper limits are set on the production cross section for a range of vectorlike quark scenarios, significantly improving upon the reach of the individual searches. Model-independent limits are set assuming the vectorlike quarks decay to standard model particles. A singlet T is excluded for masses below 1.31 TeV and a singlet B is excluded for masses below 1.22 TeV. Assuming a weak isospin (T,B) doublet and |V_{Tb}|≪|V_{tB}|, T and B masses below 1.37 TeV are excluded.

Observation of Centrality-Dependent Acoplanarity for Muon Pairs Produced via Two-Photon Scattering in Pb+Pb Collisions at sqrt[s_{NN}]=5.02 TeV with the ATLAS Detector

This Letter presents a measurement of γγ→μ^{+}μ^{-} production in Pb+Pb collisions recorded by the ATLAS detector at the Large Hadron Collider at sqrt[s_{NN}]=5.02  TeV with an integrated luminosity of 0.49  nb^{-1}. The azimuthal angle and transverse momentum correlations between the muons are measured as a function of collision centrality. The muon pairs are produced from γγ through the interaction of the large electromagnetic fields of the nuclei. The contribution from background sources of muon pairs is removed using a template fit method. In peripheral collisions, the muons exhibit a strong back-to-back correlation consistent with previous measurements of muon pair production in ultraperipheral collisions. The angular correlations are observed to broaden significantly in central collisions. The modifications are qualitatively consistent with rescattering of the muons while passing through the hot matter produced in the collision.

Search for Resonant and Nonresonant Higgs Boson Pair Production in the bb[over ¯]τ^{+}τ^{-} Decay Channel in pp Collisions at sqrt[s]=13 TeV with the ATLAS Detector

A search for resonant and nonresonant pair production of Higgs bosons in the bb[over ¯]τ^{+}τ^{-} final state is presented. The search uses 36.1  fb^{-1} of pp collision data with sqrt[s]=13  TeV recorded by the ATLAS experiment at the LHC in 2015 and 2016. Decays of the τ-lepton pairs with at least one τ lepton decaying to final states with hadrons and a neutrino are considered. No significant excess above the expected background is observed in the data. The cross-section times branching ratio for nonresonant Higgs boson pair production is constrained to be less than 30.9 fb, 12.7 times the standard model expectation, at 95% confidence level. The data are also analyzed to probe resonant Higgs boson pair production, constraining a model with an extended Higgs sector based on two doublets and a Randall-Sundrum bulk graviton model. Upper limits are placed on the resonant Higgs boson pair production cross-section times branching ratio, excluding resonances X in the mass range 305  GeV<m_{X}<402  GeV in the simplified hMSSM minimal supersymmetric model for tanβ=2 and excluding bulk Randall-Sundrum gravitons G_{KK} in the mass range 325  GeV<m_{G_{KK}}<885  GeV for k/M[over ¯]_{Pl}=1.

Probing the Quantum Interference between Singly and Doubly Resonant Top-Quark Production in pp Collisions at sqrt[s]=13 TeV with the ATLAS Detector

This Letter presents a normalized differential cross-section measurement in a fiducial phase-space region where interference effects between top-quark pair production and associated production of a single top quark with a W boson and a b-quark are significant. Events with exactly two leptons (ee, μμ, or eμ) and two b-tagged jets that satisfy a multiparticle invariant mass requirement are selected from 36.1  fb^{-1} of proton-proton collision data taken at sqrt[s]=13  TeV with the ATLAS detector at the LHC in 2015 and 2016. The results are compared with predictions from simulations using various strategies for the interference. The standard prescriptions for interference modeling are significantly different from each other but are within 2σ of the data. State-of-the-art predictions that naturally incorporate interference effects provide the best description of the data in the measured region of phase space most sensitive to these effects. These results provide an important constraint on interference models and will guide future model development and tuning.

Measurement of the Soft-Drop Jet Mass in pp Collisions at sqrt[s]=13 TeV with the ATLAS Detector

Jet substructure observables have significantly extended the search program for physics beyond the standard model at the Large Hadron Collider. The state-of-the-art tools have been motivated by theoretical calculations, but there has never been a direct comparison between data and calculations of jet substructure observables that are accurate beyond leading-logarithm approximation. Such observables are significant not only for probing the collinear regime of QCD that is largely unexplored at a hadron collider, but also for improving the understanding of jet substructure properties that are used in many studies at the Large Hadron Collider. This Letter documents a measurement of the first jet substructure quantity at a hadron collider to be calculated at next-to-next-to-leading-logarithm accuracy. The normalized, differential cross section is measured as a function of log_{10}ρ^{2}, where ρ is the ratio of the soft-drop mass to the ungroomed jet transverse momentum. This quantity is measured in dijet events from 32.9  fb^{-1} of sqrt[s]=13  TeV proton-proton collisions recorded by the ATLAS detector. The data are unfolded to correct for detector effects and compared to precise QCD calculations and leading-logarithm particle-level Monte Carlo simulations.

Search for Low-Mass Dijet Resonances Using Trigger-Level Jets with the ATLAS Detector in pp Collisions at sqrt[s]=13 TeV

Searches for dijet resonances with sub-TeV masses using the ATLAS detector at the Large Hadron Collider can be statistically limited by the bandwidth available to inclusive single-jet triggers, whose data-collection rates at low transverse momentum are much lower than the rate from standard model multijet production. This Letter describes a new search for dijet resonances where this limitation is overcome by recording only the event information calculated by the jet trigger algorithms, thereby allowing much higher event rates with reduced storage needs. The search targets low-mass dijet resonances in the range 450-1800 GeV. The analyzed data set has an integrated luminosity of up to 29.3  fb^{-1} and was recorded at a center-of-mass energy of 13 TeV. No excesses are found; limits are set on Gaussian-shaped contributions to the dijet mass distribution from new particles and on a model of dark-matter particles with axial-vector couplings to quarks.

Sequential gene regulatory events leading to glucocorticoid-evoked apoptosis of CEM human leukemic cells:interactions of MAPK, MYC and glucocorticoid pathways

Gene expression responses to glucocorticoid (GC) in the hours preceding onset of apoptosis were compared in three clones of human acute lymphoblastic leukemia CEM cells. Between 2 and 20h, all three clones showed increasing numbers of responding genes. Each clone had many unique responses, but the two responsive clones showed a group of responding genes in common, different from the resistant clone. MYC levels and the balance of activities between the three major groups of MAPKs are known important regulators of glucocorticoid-driven apoptosis in several lymphoid cell systems. Common to the two sensitive clones were changed transcript levels from genes that decrease amounts or activity of anti-apoptotic ERK/MAPK1 and JNK2/MAPK9, or of genes that increase activity of pro-apoptotic p38/MAPK14. Down-regulation of MYC and several MYC-regulated genes relevant to MAPKs also occurred in both sensitive clones. Transcriptomine comparisons revealed probable NOTCH-GC crosstalk in these cells.

Search for the Decay of the Higgs Boson to Charm Quarks with the ATLAS Experiment

A direct search for the standard model Higgs boson decaying to a pair of charm quarks is presented. Associated production of the Higgs and Z bosons, in the decay mode ZH→ℓ^{+}ℓ^{-}cc[over ¯] is studied. A data set with an integrated luminosity of 36.1  fb^{-1} of pp collisions at sqrt[s]=13TeV recorded by the ATLAS experiment at the LHC is used. The H→cc[over ¯] signature is identified using charm-tagging algorithms. The observed (expected) upper limit on σ(pp→ZH)×B(H→cc[over ¯]) is 2.7 (3.9_{-1.1}^{+2.1}) pb at the 95% confidence level for a Higgs boson mass of 125 GeV, while the standard model value is 26 fb.

Search for a Structure in the B_{s}^{0}π^{±} Invariant Mass Spectrum with the ATLAS Experiment

A search for the narrow structure, X(5568), reported by the D0 Collaboration in the decay sequence X→B_{s}^{0}π^{±}, B_{s}^{0}→J/ψϕ, is presented. The analysis is based on a data sample recorded with the ATLAS detector at the LHC corresponding to 4.9  fb^{-1} of pp collisions at 7 TeV and 19.5  fb^{-1} at 8 TeV. No significant signal was found. Upper limits on the number of signal events, with properties corresponding to those reported by D0, and on the X production rate relative to B_{s}^{0} mesons, ρ_{X}, were determined at 95% confidence level. The results are N(X)<382 and ρ_{X}<0.015 for B_{s}^{0} mesons with transverse momenta above 10 GeV, and N(X)<356 and ρ_{X}<0.016 for transverse momenta above 15 GeV. Limits are also set for potential B_{s}^{0}π^{±} resonances in the mass range 5550 to 5700 MeV.