Fission yeast Aip3p (spAip3p) is required for an alternative actin-directed polarity program

Aip3p is an actin-interacting protein that regulates cell polarity in budding yeast. The Schizosaccharomyces pombe-sequencing project recently led to the identification of a homologue of Aip3p that we have named spAip3p. Our results confirm that spAip3p is a true functional homologue of Aip3p. When expressed in budding yeast, spAip3p localizes similarly to Aip3p during the cell cycle and complements the cell polarity defects of an aip3Delta strain. Two-hybrid analysis shows that spAip3p interacts with actin similarly to Aip3p. In fission yeast, spAip3p localizes to both cell ends during interphase and later organizes into two rings at the site of cytokinesis. spAip3p localization to cell ends is dependent on microtubule cytoskeleton, its localization to the cell middle is dependent on actin cytoskeleton, and both patterns of localization require an operative secretory pathway. Overexpression of spAip3p disrupts the actin cytoskeleton and cell polarity, leading to morphologically aberrant cells. Fission yeast, which normally rely on the microtubule cytoskeleton to establish their polarity axis, can use the actin cytoskeleton in the absence of microtubule function to establish a new polarity axis, leading to the formation of branched cells. spAip3p localizes to, and is required for, branch formation, confirming its role in actin-directed polarized cell growth in both Schizosaccharomyces pombe and Saccharomyces cerevisiae.

The secretory pathway mediates localization of the cell polarity regulator Aip3p/Bud6p

Aip3p/Bud6p is a regulator of cell and cytoskeletal polarity in Saccharomyces cerevisiae that was previously identified as an actin-interacting protein. Actin-interacting protein 3 (Aip3p) localizes at the cell cortex where cytoskeleton assembly must be achieved to execute polarized cell growth, and deletion of AIP3 causes gross defects in cell and cytoskeletal polarity. We have discovered that Aip3p localization is mediated by the secretory pathway. Mutations in early- or late-acting components of the secretory apparatus lead to Aip3p mislocalization. Biochemical data show that a pool of Aip3p is associated with post-Golgi secretory vesicles. An investigation of the sequences within Aip3p necessary for Aip3p localization has identified a sequence within the N terminus of Aip3p that is sufficient for directing Aip3p localization. Replacement of the N terminus of Aip3p with a homologous region from a Schizosaccharomyces pombe protein allows for normal Aip3p localization, indicating that the secretory pathway-mediated Aip3p localization pathway is conserved. Delivery of Aip3p also requires the type V myosin motor Myo2p and its regulatory light-chain calmodulin. These data suggest that one function of calmodulin is to activate Myo2p's activity in the secretory pathway; this function is likely the polarized movement of late secretory vesicles and associated Aip3p on actin cables.

Aip1p interacts with cofilin to disassemble actin filaments

Actin interacting protein 1 (Aip1) is a conserved component of the actin cytoskeleton first identified in a two-hybrid screen against yeast actin. Here, we report that Aip1p also interacts with the ubiquitous actin depolymerizing factor cofilin. A two-hybrid-based approach using cofilin and actin mutants identified residues necessary for the interaction of actin, cofilin, and Aip1p in an apparent ternary complex. Deletion of the AIP1 gene is lethal in combination with cofilin mutants or act1-159, an actin mutation that slows the rate of actin filament disassembly in vivo. Aip1p localizes to cortical actin patches in yeast cells, and this localization is disrupted by specific actin and cofilin mutations. Further, Aip1p is required to restrict cofilin localization to cortical patches. Finally, biochemical analyses show that Aip1p causes net depolymerization of actin filaments only in the presence of cofilin and that cofilin enhances binding of Aip1p to actin filaments. We conclude that Aip1p is a cofilin-associated protein that enhances the filament disassembly activity of cofilin and restricts cofilin localization to cortical actin patches.

Aip3p/Bud6p, a yeast actin-interacting protein that is involved in morphogenesis and the selection of bipolar budding sites

A search for Saccharomyces cerevisiae proteins that interact with actin in the two-hybrid system and a screen for mutants that affect the bipolar budding pattern identified the same gene, AIP3/BUD6. This gene is not essential for mitotic growth but is necessary for normal morphogenesis. MATa/alpha daughter cells lacking Aip3p place their first buds normally at their distal poles but choose random sites for budding in subsequent cell cycles. This suggests that actin and associated proteins are involved in placing the bipolar positional marker at the division site but not at the distal tip of the daughter cell. In addition, although aip3 mutant cells are not obviously defective in the initial polarization of the cytoskeleton at the time of bud emergence, they appear to lose cytoskeletal polarity as the bud enlarges, resulting in the formation of cells that are larger and rounder than normal. aip3 mutant cells also show inefficient nuclear migration and nuclear division, defects in the organization of the secretory system, and abnormal septation, all defects that presumably reflect the involvement of Aip3p in the organization and/or function of the actin cytoskeleton. The sequence of Aip3p is novel but contains a predicted coiled-coil domain near its C terminus that may mediate the observed homo-oligomerization of the protein. Aip3p shows a distinctive localization pattern that correlates well with its likely sites of action: it appears at the presumptive bud site prior to bud emergence, remains near the tips of small bund, and forms a ring (or pair of rings) in the mother-bud neck that is detectable early in the cell cycle but becomes more prominent prior to cytokinesis. Surprisingly, the localization of Aip3p does not appear to require either polarized actin or the septin proteins of the neck filaments.

Regulation of mRNA export in response to stress in Saccharomyces cerevisiae

The response of eukaryotic cells to heat shock and other forms of stress occurs at both transcriptional and post-transcriptional levels. We used in situ hybridization to determine whether stress affected the subcellular distribution of poly(A)+ RNA in Saccharomyces cerevisiae. Following induction of stress by either heat shock (42 degrees C) or addition of a high concentration of ethanol (10%), the nucleocytoplasmic export of most poly(A)+ RNA was blocked. In situ hybridization indicated that heat-inducible SSA4 and SSA1 mRNAs were exported from nuclei under these same conditions. On the other hand, both GAL1 and URA3 transcripts expressed from the SSA4 promoter accumulated in nuclei following heat shock. Sequences within either the 5' 1600 or the 3' 500 nucleotides of SSA4 mRNA were sufficient to direct GAL1 mRNA to the cytoplasm during stress. The export of SSA4 mRNA following stress required functional nuclear pore complexes, as SSA4 mRNA accumulated in nuclei following heat shock of cells containing temperature-sensitive nucleoporins. However, the selective export of SSA4 mRNA was maintained in heat-shocked cells carrying temperature-sensitive alleles of RNA1, PRP20, or an inducible dominant-negative allele of GSP1, the S. cerevisiae homolog of RAN/TC4. The results reported here suggest that there is selective export of mRNA in yeast.

Nuclear pore complex clustering and nuclear accumulation of poly(A)+ RNA associated with mutation of the Saccharomyces cerevisiae RAT2/NUP120 gene

To identify genes involved in the export of messenger RNA from the nucleus to the cytoplasm, we used an in situ hybridization assay to screen temperature-sensitive strains of Saccharomyces cerevisiae. This identified those which accumulated poly(A)+ RNA in their nuclei when shifted to the non-permissive temperature of 37 degrees C. We describe here the properties of yeast strains carrying mutations in the RAT2 gene (RAT - ribonucleic acid trafficking) and the cloning of the RAT2 gene. Only a low percentage of cells carrying the rat2-1 allele showed nuclear accumulation of poly(A)+ RNA when cultured at 15 degrees or 23 degrees C, but within 4 h of a shift to the nonpermissive temperature of 37 degrees C, poly(A)+ RNA accumulated within the nuclei of approximately 80% of cells. No defect was seen in the nuclear import of a reporter protein bearing a nuclear localization signal. Nuclear pore complexes (NPCs) are distributed relatively evenly around the nuclear envelope in wild-type cells. In cells carrying either the rat2-1 or rat2-2 allele, NPCs were clustered together into one or a few regions of the nuclear envelope. This clustering was a constitutive property of mutant cells. NPCs remained clustered in crude nuclei isolated from mutant cells, indicating that these clusters are not able to redistribute around the nuclear envelope when nuclei are separated from cytoplasmic components. Electron microscopy revealed that these clusters were frequently found in a protuberance of the nuclear envelope and were often located close to the spindle pole body. The RAT2 gene encodes a 120-kD protein without similarity to other known proteins. It was essential for growth only at 37 degrees C, but the growth defect at high temperature could be suppressed by growth of mutant cells in the presence of high osmolarity media containing 1.0 M sorbitol or 0.9 M NaCl. The phenotypes seen in cells carrying a disruption of the RAT2 gene were very similar to those seen with the rat2-1 and rat2-2 alleles. Epitope tagging was used to show that Rat2p is located at the nuclear periphery and co-localizes with yeast NPC proteins recognized by the RL1 monoclonal antibody. The rat2-1 allele was synthetically lethal with both the rat3-1/nup133-1 and rat7-1/nup159-1 alleles. These results indicate that the product of this gene is a nucleoporin which we refer to as Rat2p/Nup120p.

Precise gene disruption in Saccharomyces cerevisiae by double fusion polymerase chain reaction

We adapted a fusion polymerase chain reaction (PCR) strategy to synthesize gene disruption alleles of any sequenced yeast gene of interest. The first step of the construction is to amplify sequences flanking the reading frame we want to disrupt and to amplify the selectable marker sequence. Then we fuse the upstream fragment to the marker sequence by fusion PCR, isolate this product and fuse it to the downstream sequence in a second fusion PCR reaction. The final PCR product can then be transformed directly into yeast. This method is rapid, relatively inexpensive, offers the freedom to choose from among a variety of selectable markers and allows one to construct precise disruptions of any sequenced open reading frame in Saccharomyces cerevisiae.

Mutation or deletion of the Saccharomyces cerevisiae RAT3/NUP133 gene causes temperature-dependent nuclear accumulation of poly(A)+ RNA and constitutive clustering of nuclear pore complexes

To identify genes whose products play potential roles in the nucleocytoplasmic export of messenger RNA, we isolated temperature-sensitive strains of Saccharomyces cerevisiae and examined them by fluorescent in situ hybridization. With the use of a digoxigen-tagged oligo-(dT)50 probe, we identified those that showed nuclear accumulation of poly(A)+ RNA when cells were shifted to the nonpermissive temperature. We describe here the properties of yeast strains bearing the rat3-1 mutation (RAT-ribonucleic acid trafficking) and the cloning of the RAT3 gene. When cultured at the permissive temperature of 23 degrees C, fewer than 10% of cells carrying the rat3-1 allele showed nuclear accumulation of poly(A)+ RNA, whereas approximately 70% showed nuclear accumulation of poly(A)+ RNA, whereas approximately 70% showed nuclear accumulation of poly(A)+ RNA after a shift to 37 degrees C for 4 h. In wild-type cells, nuclear pore complexes (NPCs) are distributed relatively evenly around the nuclear envelope. Both indirect immunofluorescence analysis and electron microscopy of rat3-1 cells indicated that NPCs were clustered into one or a few regions of the NE in mutant cells. Similar NPC clustering was seen in mutant cells cultured at temperatures between 15 degrees C and 37 degrees C. The RAT3 gene encodes an 1157-amino acid protein without similarity to other known proteins. It is essential for growth only at 37 degrees C. Cells carrying a disruption of the RAT3 gene were very similar to cells carrying the original rat3-1 mutation; they showed temperature-dependent nuclear accumulation of poly(A)+ RNA and exhibited constitutive clustering of NPCs. Epitope tagging of Rat3p demonstrated that it is located at the nuclear periphery and co-localizes with nuclear pore proteins recognized by the RL1 monoclonal antibody. We refer to this nucleoporin as Rat3p/Nup133p.

Defining protein interactions with yeast actin in vivo

Using the two-hybrid protein interaction reporter system, actin, profilin, Srv2p and two SH3-containing proteins are found to bind yeast actin in vivo. When tested for ability to interact with 35 actin mutations distributed over the monomer surface, distinct subsets of mutations characteristic for each putative ligand are found to disrupt binding. In particular, the pattern of differential interactions for the actin-actin interaction is consistent with published structures for the actin filament. Despite functional similarities, the patterns of differential interaction for Srv2p and profilin are different. In contrast, the patterns for profilin and the SH3 domain proteins suggest a shared binding site and commonality in mechanism.

nup1 mutants exhibit pleiotropic defects in nuclear pore complex function

The NUP1 gene of Saccharomyces cerevisiae encodes one member of a family of nuclear pore complex proteins (nucleoporins) conserved from yeast to vertebrates. We have used mutational analysis to investigate the function of Nup1p. Deletion of either the amino- or carboxy-terminal domain confers a lethal phenotype, but partial truncations at either end affect growth to varying extents. Amino-terminal truncation causes mislocalization and degradation of the mutant protein, suggesting that this domain is required for targeting Nup1p to the nuclear pore complex. Carboxy-terminal mutants are stable but do not have wild-type function, and confer a temperature sensitive phenotype. Both import of nuclear proteins and export of poly(A) RNA are defective at the nonpermissive temperature. In addition, nup1 mutant cells become multinucleate at all temperatures, a phenotype suggestive of a defect in nuclear migration. Tubulin staining revealed that the mitotic spindle appears to be oriented randomly with respect to the bud, in spite of the presence of apparently normal cytoplasmic microtubules connecting one spindle pole body to the bud tip. EM analysis showed that the nuclear envelope forms long projections extending into the cytoplasm, which appear to have detached from the bulk of the nucleus. Our results suggest that Nup1p may be required to retain the structural integrity between the nuclear envelope and an underlying nuclear scaffold, and that this connection is required to allow reorientation of the nucleus in response to cytoskeletal forces.

Nuclear PRP20 protein is required for mRNA export

The yeast PRP20 protein is highly homologous in structure and function to the RCC1 protein of higher eukaryotes. The RCC1 protein is involved in the regulation of the onset of mitosis, whereas the PRP20 protein was shown to be required for accurate and efficient mRNA metabolism. The first observable phenotype in mutant prp20 cells when shifted from permissive to non-permissive temperature is a loss of nuclear PRP20 protein. Concomitantly, an accumulation of poly(A)+ RNA in the nucleus is observed. The temperature-sensitive RCC1 allele in the mutant hamster cell line tsBN2 leads to a similar accumulation of mRNA in the nucleus.

Isolation and characterization of RAT1: an essential gene of Saccharomyces cerevisiae required for the efficient nucleocytoplasmic trafficking of mRNA

We have combined techniques of genetics and histochemistry to identify genes required for the nucleocytoplasmic export of mRNA in the budding yeast Saccharomyces cerevisiae. We adapted in situ hybridization using a digoxigenin-labeled oligo(dT)50 probe to localize poly(A)+ RNA in fixed yeast cells and used yeast strains carrying the rna1-1 mutation to develop an assay. The rna1-1 mutation is the only previously described mutation that causes defects in mRNA export. As visualized with this RNA localization assay, rna1-1 strains accumulated poly(A)+ RNA at the nuclear periphery at the nonpermissive temperature. This was in contrast to the RNA localization pattern of wild-type cells or rna1-1 cells grown at permissive temperature. Wild-type cells showed bright uniform cytoplasmic staining with little detectable RNA in the nuclei. We used this RNA localization assay to screen a bank of temperature-sensitive yeast strains for mutants with inducible defects in mRNA trafficking. Strains identified in this manner are designated RAT mutants for ribonucleic acid trafficking. The rat1-1 allele conferred temperature-sensitive accumulation of poly(A)+ RNA in one to several intranuclear spots that appear to lie at the nuclear periphery. RNA processing was unaffected in rat1-1 strains, except for an inducible defect in trimming the 5' end of the 5.8S rRNA. The wild-type RAT1 gene was cloned by complementation; it encodes an essential 116-kD protein with regions of homology to the protein encoded by SEP1 (also known as DST2, XRN1, KEM1, and RAR5). Sep1p is a nucleic acid binding protein, a 5'----3' exonuclease, and catalyzes DNA strand transfer reactions in vitro. We discuss the possible significance of the Rat1p/Sep1p homology for RNA trafficking. We also discuss the potential of this RNA localization assay to identify genes involved in nuclear structure and RNA metabolism.

A calcium-dependent antibody for identification and purification of recombinant proteins

We report a straightforward methodology for purification of recombinant proteins by incorporating a short hydrophilic peptide marker segment at their N-termini. A calcium-dependent antibody that reacts primarily with the first three amino acids of this peptide segment was used to affinity purify the fusion proteins in a single chromatographic step. The marker peptide could subsequently be removed by proteolysis with the enzyme enterokinase.