Role of Inorganic Fillers on the Physical Aging and Toughness Loss of PLLA/BaSO4 Composites

The addition of inorganic fillers has been reported to increase the toughness of poly(l-lactide) (PLLA), but the effect of physical aging in such composites has been neglected. The present work discusses the effect of the still ongoing segmental relaxation in PLLA-based composites filled with BaSO4 inorganic particles in regard of the filler quantity. By means of differential scanning calorimetry, X-ray diffraction, and tensile testing of progressively aged PLLA filled with particles ranging from 0.5-10 wt %, we observed an increase in the mechanical energy required to activate the plastic flow of the primary structure in the PLLA matrix, which resulted in the embrittlement of the majority of composites upon enough aging. Results further clarify the role of debonding in the activation process of PLLA, and the behavior of the composite is described at the segmental level. Only an addition of 10% of particles has effectively preserved a ductile behavior of the samples beyond 150 aging days; therefore, we strongly remark the significance of studying the effect of physical aging in such composites.

Lactide and Ethylene Brassylate-Based Thermoplastic Elastomers and Their Nanocomposites with Carbon Nanotubes: Synthesis, Mechanical Properties and Interaction with Astrocytes

Polylactide (PLA) is among the most commonly used polymers for biomedical applications thanks to its biodegradability and cytocompatibility. However, its inherent stiffness and brittleness are clearly inappropriate for the regeneration of soft tissues (e.g., neural tissue), which demands biomaterials with soft and elastomeric behavior capable of resembling the mechanical properties of the native tissue. In this work, both L- and D,L-lactide were copolymerized with ethylene brassylate, a macrolactone that represents a promising alternative to previously studied comonomers (e.g., caprolactone) due to its natural origin. The resulting copolymers showed an elastomeric behavior characterized by relatively low Young's modulus, high elongation at break and high strain recovery capacity. The thermoplastic nature of the resulting copolymers allows the incorporation of nanofillers (i.e., carbon nanotubes) that further enable the modulation of their mechanical properties. Additionally, nanostructured scaffolds were easily fabricated through a thermo-pressing process with the aid of a commercially available silicon stamp, providing geometrical cues for the adhesion and elongation of cells representative of the nervous system (i.e., astrocytes). Accordingly, the lactide and ethylene brassylate-based copolymers synthesized herein represent an interesting formulation for the development of polymeric scaffolds intended to be used in the regeneration of soft tissues, thanks to their adjustable mechanical properties, thermoplastic nature and observed cytocompatibility.

Benefits of Polydopamine as Particle/Matrix Interface in Polylactide/PD-BaSO4 Scaffolds

This work reports the versatility of polydopamine (PD) when applied as a particle coating in a composite of polylactide (PLA). Polydopamine was observed to increase the particle-matrix interface strength and facilitate the adsorption of drugs to the material surface. Here, barium sulfate radiopaque particles were functionalized with polydopamine and integrated into a polylactide matrix, leading to the formulation of a biodegradable and X-ray opaque material with enhanced mechanical properties. Polydopamine functionalized barium sulfate particles also facilitated the adsorption and release of the antibiotic levofloxacin. Analysis of the antibacterial capacity of these composites and the metabolic activity and proliferation of human dermal fibroblasts in vitro demonstrated that these materials are non-cytotoxic and can be 3D printed to formulate complex biocompatible materials for bone fixation devices.

Coating of bioactive glass particles with mussel-inspired polydopamine as a strategy to improve the thermal stability of poly(l-lactide)/bioactive glass composites

Coating bioactive glass particles with polydopamine hinders the degradation reaction occurring at high temperatures between PLLA and bioactive glass particles.

[Biodegradable catheters for fistula prevention in hypospadias. Experimental preliminary study]

INTRODUCTION

Continuous technical innovations are not enough to resolve the high incidence of fistula after hypospadias repair. A urethral catheter-tutor made of reabsorbable polymeric biomaterial (RPB) which could be left in situ long enough could reduce the complications.

TARGET

To investigate in an animal model differents RPB to be used in urology.

METHODOLOGY

CRL Wistar rats, males, divided into 5 equal groups according to the used polymers: polylactide; lactic-coprolactone copolymer; lactic-glycolic copolymer; simulated; control silicones. Three individuals were sacrificed per group at 4th, 10th and 16th week. In all animals (exceptuating the simulated group), biomaterial was fixed to the bladder wall bylaparotomy. Animals remained in individual housing and kept under daily control of hematuria during the first 15 days and weekly weight and urine control for pH and lactate. After being slaughtered, remaining polymer was collected for chemical analysis and bladder tissue for hystologic study.

RESULTS

There was no mortality, hematuria nor other clinical signs. The bladder wall showed a mild foreign body reaction. The values of lactate and pH in urine did not reach toxic levels. Lactic-glycolic was totally reabsorbed by the 10th week and had the lowest degree of calcification. Polylactide and lactic-coprolactone remained intact.

CONCLUSION

The model of urinary bladder has proven useful for studying the degradation of bioresorbable polymers. The analyzed polymers have spent long time to be reabsorbed, so we will have to study new others.

Crystallinity assessment and in vitro cytotoxicity of polylactide scaffolds for biomedical applications

Bioresorbable polylactides are one of the most important materials for tissue engineering applications. In this work we have prepared scaffolds based on the two optically pure stereoisomers: poly(L: -lactide) (PLLA) and poly(D: -lactide) (PDLA). The crystalline structure and morphology were evaluated by DSC, AFM and X-ray diffraction. PLLA and PDLA crystallized in the α form and the equimolar PLLA/PDLA blend, crystallized in the stereocomplex form, were analyzed by a proliferation assay in contact with mouse L-929 and human fibroblasts and neonatal keratinocytes for in vitro cytotoxicity evaluation. SEM analysis was conducted to determine the cell morphology, spreading and adhesion when in contact with the different polymer surfaces. The preserved proliferation rate showed in MTT tests and the high colonization on the surface of polylactides observed by SEM denote that PLLA, PDLA and the equimolar PLLA/PDLA are useful biodegradable materials in which the crystalline characteristics can be tuned for specific biomedical applications.

Conformational Behavior of Poly(l-lactide) Studied by Infrared Spectroscopy

This paper reports the analysis of the C=O stretching region of poly(L-lactide). This spectral band splits into up to four components, a phenomenon that a priori can be explained in terms of carbonyl-carbonyl coupling or specific interactions (such as C-H...O hydrogen bonding or dipole-dipole). Hydrogen bonding can be discarded from the analysis of the C-H stretching spectral region. In addition, low molecular weight dicarbonyl compounds of chemical structure similar to that of PLLA, such as diacyl peroxides, show a remarkable splitting of the carbonyl band attributed to intramolecular carbonyl-carbonyl coupling. Several mechanisms can be responsible for this behavior, such as mechanical coupling, electronic effects, or through-space intramolecular TDC (transition dipole coupling) interactions. Intermolecular dipole-dipole interactions (possible in the form of interchain TDC interactions) are proven to be of minor relevance taking into account the spatial structure of the PLLA conformers. The Simply Coupled Oscilator (SCO) model, which only accounts for mechanical coupling, has been found to predict adequately the relative intensity of the symmetric and asymmetric bands of dicarbonyl compounds. The dispersion curves predicted for PLLA by the SCO model also match those given by more general treatments, such as Miyazawa's first-order perturbation theory. Hence, the SCO model is adopted here as an adequate yet simple tool for the interpretation of band splitting caused by intramolecular coupling of polylactide. The four components observed in the C=O stretching band of semicrystalline PLLA are attributed to the four possible conformers: gt, gg, tt, and tg. The narrow bands observed for the interlamellar material are attributed to highly ordered chains, indicating the absence of a truly amorphous phase in the crystalline polymer. The interphase seems to extend over the whole interlamellar region, showing the features of a semiordered metastable phase. In amorphous PLLA, bands corresponding to gt, gg, and tt conformers also can be resolved by second derivative techniques, and curve-fitting results provide information about the conformational population at different temperatures.