Ionic liquid-assisted pretreatment of lignocellulosic biomass using purified Streptomyces MS2A cellulase for bioethanol production

In recent years, the process of producing bioethanol from lignocellulosic biomass through biorefining has become increasingly important. However, to obtain a high yield of ethanol, the complex structures in the feedstock must be broken down into simple sugars. A cost-effective and innovative method for achieving this is ionic liquid pre-treatment, which is widely used to efficiently hydrolyze the lignocellulosic material. The study aims to produce a significant profusion of bioethanol via catalytic hydrolysis of ionic liquid-treated lignocellulose biomass. The current study reports the purification of Streptomyces sp. MS2A cellulase via ultrafiltration and gel permeation chromatography. The kinetic parameters and the biochemical nature of the purified cellulase were analyzed for the effective breakdown of the EMIM[OAC] treated lignocellulose chain. The two-step cellulase purification resulted in 6.28 and 12.44 purification folds. The purified cellulase shows a Km value of 0.82 ± 0.21 mM, and a Vmax value of 85.59 ± 8.87 μmol min-1 mg-1 with the catalytic efficiency of 1.027 S-1. The thermodynamic parameters like ΔH, ΔS, and ΔG of the system were studied along with the thermal deactivation kinetics of cellulase. The optimal temperature and pH of the purified cellulase enzyme for hydrolysis was found to be 40 °C and 7. The rice husk and wheat husk used in this study were pretreated with the EMIM [OAC] ionic liquid and the change in the structure of lignocellulosic biomass was observed via HRSEM. The ionic liquid treated biomass showed the highest catalytic hydrolysis yield of 106.66 ± 0.19 mol/ml on the third day. The obtained glucose was fermented with Saccharomyces cerevisiae to yield 23.43 g of ethanol/l of glucose from the rice husk (RH) and 24.28 g of ethanol/l of glucose from the wheat husk (WH).

Genomic analysis of lignocellulolytic enzyme producing novel Streptomyces sp.MS2A for the bioethanol applications

The conversion of lignocellulosic waste to energy offers a cost-effective biofuel. The current study discusses the utilization of cellulose in rice husks by lichen-associated Streptomyces sp. MS2A via carbohydrate metabolism. Out of 39 actinobacteria, one actinobacterial strain MS2A, showed CMCase, FPase, and cellobiohydrolase activity. The whole genome analysis of Streptomyces sp. MS2A showed maximum similarity with Streptomyces sp. CCM_MD2014. The genome analysis confirmed the presence of cellulose-degrading genes along with xylan-degrading genes that code for GH3, GH6, GH9, GH11, GH43, GH51, and 15 other GH families with glycosyl transferase, carbohydrate-binding modules, and energy metabolism groups. Protein family analysis corroborates the enzyme family. Among the 19,402 genes of Streptomyces sp. MS2A, approximately 70 GH family codes for lignocellulose degradation enzymes. The structure of cellulase was modeled and validated. Scanning electron microscopy and gas chromatography-mass spectrometry (GCMS) was performed to analyze the lignocellulosic degradation of rice husk and the end product bioethanol.

A comprehensive review on strategic study of cellulase producing marine actinobacteria for biofuel applications

Every year, 180 billion tonnes of cellulose are produced by plants as waste biomass after the cultivation of the desired product. One of the smart and effective ways to utilize this biomass rather than burn it is to utilize the biomass to adequately meet the energy needs with the help of microbial cellulase that can catalytically convert the cellulose into simple sugar units. Marine actinobacteria is one of the plentiful gram-positive bacteria known for its industrial application as it can produce multienzyme cellulase with high thermal tolerance, pH stability and high resistant towards metal ions and salt concentration, along with other antimicrobial properties. Highly stable cellulase obtained from marine actinobacteria will convert the cellulose biomass into glucose, which is the precursor for biofuel production. This review will provide a comprehensive outlook of various strategic applications of cellulase from marine actinobacteria which can facilitate the breakdown of lignocellulosic biomass to bioenergy with respect to its characteristics based on the location/environment that the organism was collected and its screening strategies followed by adopted methodologies to mine the novel cellulase genome and enhance the production, thereby increasing the activity of cellulase continued by effective immobilization on novel substrates for the multiple usage of cellulase along with the industrial applications.

Synthesis of recyclable GO/Cu3(BTC)2/Fe3O4 hybrid nanocomposites with enhanced photocatalytic degradation of aflatoxin B1

This study evaluated the photocatalytic performance of the activated carbon assisted GO/Cu₃(BTC)₂/Fe₃O₄ photocatalyst for aflatoxin B1 (AFB1) degradation under ultraviolet light. The nanocomposite was characterized by Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and nitrogen adsorption-desorption. The numerous factors influencing the degradation efficiency of AFB1 including catalyst dose, pH importance, and contact time were also probed. The elevated degradation performance of AFB1 by 99% was due to a larger surface area and improved GO/Cu₃(BTC)₂/Fe₃O₄ photocatalyst. The degradation process followed a pseudo-first-order kinetic model. Moreover, it is possible to quickly isolate the catalyst from the solution and retain successful operation. In the degradation of AFB1, the hole(h⁺) and the hydroxyl radicals(OH) were found to play a significant role. These studies showed that GO/Cu₃(BTC)₂/Fe₃O₄ has high capturing capacity and photoactivity synergy, thereby offering a quick effect, and green solution to AFB1 degradation.

Influence of 2D template-assisted (SBA-15) metal oxide Co3O4 for pseudocapacitive and dye degradation application

Cobalt oxide (Co₃O₄) is a low-cost material exhibiting excellent physicochemical and photocatalytic properties indicating its potential use for next-generation eco-friendly energy storage and photocatalytic degradation applications. In this study, Co₃O₄ nanoarcs were synthesized using SBA-15 as a template by microwave-assisted method to form an S15/m-Co₃O₄ product. Characterization was done by low and wide-angle X-Ray diffraction, and Fourier transformed infra-red spectroscopic studies confirming the presence of S15/m-Co₃O₄. Scanning Electron Microscope images proved the agglomerated nanotube and nanoarcs like the structure of SBA-15 and S15/m- Co₃O₄, respectively. Electrochemical studies included cyclic voltammetry, charge/discharge, retention capacity, and electron impedance spectroscopy studies in a 3-electrode system. S15/m-Co₃O₄ nanoarcs, as the electrode material, was revealed to have a specific capacity of 87.5 C/g in 1 M KOH solution. Upon running 1000 cycles, the material had excellent capacity retention of 87%. The S15/m-Co₃O₄ product also underwent photocatalytic degradation studies. The Rhodamine R6G dye degradation by S15/m-Co₃O₄ under UV irradiation exhibited a high degradation percentage of 97.7%, following the first-order kinetics. S15/m-Co₃O₄ has proven to be biocompatible and can be used to enhance supercapacitors which are an ideal alternative to conventional batteries for energy storage applications. Thus, the data produced proves S15/m-Co₃O₄ nanoarcs is an excellent electrode material for pseudocapacitive application and a catalyst for photocatalytic degradation of dye molecules.

Nanomaterials as adsorbents for As(III) and As(V) removal from water: A review

Freshwater demand will rise in the next couple of decades, with an increase in worldwide population growth and industrial development. The development activities, on one side, have increased the freshwater demand. However, the ground water has been degraded. Among the various organic and inorganic contaminants, arsenic is one of the most toxic elements. Arsenic contamination in ground waters is a major issue worldwide, especially in South and Southeast Asia. Various methods have been applied to provide a remedy to arsenic contamination, including adsorption, ion exchange, oxidation, coagulation-precipitation and filtration, and membrane filtration. Out of these methods, adsorption of As(III)/As(V) using nanomaterials and biopolymers has been used on a wide scale. The present review focuses on recently used nanomaterials and biopolymer composites for As(III)/As(V) sorptive removal. As(III)/As(V) adsorption mechanisms have been explored for various sorbents. The impacts of environmental factors such as pH and co-existing ions on As(III)/As(V) removal, have been discussed. Comparison of various nanosorbents and biopolymer composites for As(III)/As(V) adsorption and regeneration of exhausted materials has been included. Overall, this review will be useful to understand the sorption mechanisms involved in As(III)/As(V) removal by nanomaterials and biopolymer composites and their comparative sorption performances.

Biogenic Synthesis of Iron Oxide Nanoparticles Using Enterococcus faecalis: Adsorption of Hexavalent Chromium from Aqueous Solution and In Vitro Cytotoxicity Analysis

The biological synthesis of nanoparticles is emerging as a potential method for nanoparticle synthesis due to its non-toxicity and simplicity. In the present study, a bacterium resistant to heavy metals was isolated from a metal-contaminated site and we aimed to report the synthesis of Fe3O4 nanoparticles via co-precipitation using bacterial exopolysaccharides (EPS) derived from Enterococcus faecalis_RMSN6 strains. A three-variable Box-Behnken design was used for determining the optimal conditions of the Fe3O4 NPs synthesis process. The synthesized Fe3O4 NPs were thoroughly characterized through multiple analytical techniques such as XRD, UV-Visible spectroscopy, FTIR spectroscopy and finally SEM analysis to understand the surface morphology. Fe3O4 NPs were then probed for the Cr(VI) ion adsorption studies. The important parameters such as optimization of initial concentration of Cr(VI) ions, effects of contact time, pH of the solution and contact time on quantity of Cr(VI) adsorbed were studied in detail. The maximum adsorption capacity of the nanoparticles was found to be 98.03 mg/g. The nanoparticles could retain up to 73% of their efficiency of chromium removal for up to 5 cycles. Additionally, prepared Fe3O4 NPs in the concentration were subjected to cytotoxicity studies using an MTT assay. The investigations using Fe3O4 NPs displayed a substantial dose-dependent effect on the A594 cells. The research elucidates that the Fe3O4 NPs synthesized from EPS of E. faecalis_RMSN6 can be used for the removal of heavy metal contaminants from wastewater.

Clean approach for chromium removal in aqueous environments and role of nanomaterials in bioremediation: Present research and future perspective

Chromium is an insidious ecological pollutant that is of huge value for its toxicity. The existing ecological objective to lower the heights of toxic materials in marine systems and to stimulate the existing water to recycle after suitable treatment of wastewater. Chromium is a hazard element that appears in discharges of numerous industries that must be diminished to accomplish the goals. Nearly all of the findings described in the literature related to the usage of various materials such as fungal, algal, bacterial biomass, and nanomaterials for chromium adsorption. The current work evaluates the findings of research commenced in the preceding on the use of a variety of adsorbents to decrease chromium concentrations in contaminated waters. This review article focuses on the issue of chromium contamination, its chemistry, causes, consequences, biological agent remediation techniques, and the detailed process of chromium detoxification in microbial cells. It also lists a description of the in situ and ex situ chromium bioremediation methods used. This can help design more effective Cr(VI) removal methods, thus bridging the difference between laboratory discoveries and industrial chromium remediation applications.

Detection, Contamination, Toxicity, and Prevention Methods of Ochratoxins: An Update Review

Ochratoxins (OTs) with nephrotoxic, immunosuppressive, teratogenic, and carcinogenic properties are thermostable fungal subordinate metabolites. OTs contamination can occur before or after harvesting, during the processing, packing, distribution, and storage of food. Mold development and mycotoxin contamination can occur in any crop or cereal that has not been stored properly for long periods of time and is subjected to high levels of humidity and temperature. Ochratoxin A (OTA) presents a significant health threat to creatures and individuals. There is also a concern of how human interaction with OTA will also express the remains of OTA from feedstuffs into animal-derived items. Numerous approaches have been studied for the reduction of the OTA content in agronomic products. These methods can be classified into two major classes: inhibition of OTA adulteration and decontamination or detoxification of food. A description of the various mycotoxins, the organism responsible for the development of mycotoxins, and their adverse effects are given. In the current paper, the incidence of OTA in various fodder and food materials is discussed, which is accompanied by a brief overview of the OTA mode of synthesis, physicochemical properties, toxic effects of various types of ochratoxins, and OTA decontamination adaptation methods. To our knowledge, we are the first to report on the structure of many naturally accessible OTAs and OTA metabolism. Finally, this paper seeks to be insightful and draw attention to dangerous OTA, which is too frequently neglected and overlooked in farm duplication from the list of discrepancy studies.

Immobilization of cellulase enzymes on nano and micro-materials for breakdown of cellulose for biofuel production-a narrative review

Cellulose is a very abundant polymer that is found in nature. Cellulose has been used as a raw material for production of biofuels for many years. However, there are multiple processing steps that are required so that cellulose can be used as a raw material for biofuel production. One of the most important steps is the breakdown of cellulose into intermediate sugars which can then be a viable substrate for biofuel production. Cellulases are enzymes which play a role in the catalysis of the breakdown of cellulose into glucose. Nanomaterials and micromaterials have been gaining a lot of attention over the past few years for its potential in immobilizing enzymes for industrial procedures. Immobilization of enzymes on these nanomaterials has been observed to be of great value due to the improvement in thermal stability, pH stability, regenerative capacity, increase in activity and the reusability of enzymes. Similarly, there have been multiple reports of cellulase enzymes being immobilized on various nanoparticles. The immobilization of these cellulase enzymes have resulted in very efficient processing and provide a great and economic solution for the processing of cellulose for biofuel production. Hence in this paper, we review and discuss the various advantages and disadvantages of enzymes on various available nanomaterials.

Ultrasound-assisted synthesis of mixed calcium magnesium oxide (CaMgO2) nanoflakes for photocatalytic degradation of methylene blue

In the present study, mixed calcium magnesium oxide (CaMgO₂) nanoflakes were synthesized using an ultrasound-assisted co-precipitation method. The physicochemical, structural and functional properties and elemental composition of the nanoflakes had been characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), High-resolution transmission electron microscopy (HR-TEM), Fourier Transform Infrared spectroscopy (FTIR), UV-VIS spectroscopy, X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Moreover, the photocatalytic actions of the nanoflakes were evaluated by the removal rates of methylene blue (MB) and p-nitrophenol (4-NP) under UV irradiation at room temperature. SEM-EDS studies revealed that the nanoflakes consisted of mixed oxide such as magnesium oxide (MgO) and calcium oxide (CaO) particles. The size of the nanoflakes was found to be in the range of 10-30 nm and the average size was 25 nm as confirmed by HR-TEM analysis. XRD revealed that the standard crystal size was calculated to be 25 nm. The synthesized nanoflakes had a strong photocatalytic activity for methylene blue (MB) and p-nitrophenol (4-NP) degradation in the presence of H₂O₂ under UV light irradiation within 60 min and 30 min, respectively. Hence, the present study proposes that the CaMgO₂ nanoflakes can be employed for the removal of dyes from wastewater.

Enzyme therapy: a forerunner in catalyzing a healthy society?

INTRODUCTION

The use of enzymes in various industries has been prevalent for centuries. However, their potency as therapeutics remained latent until the late 1950 s, when scientists finally realized the gold mine they were sitting on. Enzyme therapy has seen rapid development over the past few decades and has been widely used for the therapy of myriad diseases, including lysosomal storage disorders, cancer, Alzheimer's disease, irritable bowel syndrome, exocrine pancreatic insufficiency, and hyperuricemia. Enzymes are also used for wound healing, the treatment of microbial infections, and gene therapy.

AREAS COVERED

This is a comprehensive review of the therapeutic use of enzymes that can act as a guidepost for researchers and academicians and presents a general overview of the developments in enzyme therapy over the years, along with updates on recent advancements in enzyme therapy research.

EXPERT OPINION

Although enzyme therapy is immensely beneficial and induces little auxiliary damage, it has several drawbacks, ranging from high cost, low stability, low production, and hyperimmune responses to the failure to cure a variety of the problems associated with a disease. Further fine-tuning and additional clinical efficacy studies are required to establish enzyme therapy as a forerunner to catalyzing a healthy society.

Biosynthesized silver nanoparticles using Bacillus amyloliquefaciens; Application for cytotoxicity effect on A549 cell line and photocatalytic degradation of p-nitrophenol

The present study reports the biosynthesis of silver nanoparticles (AgNPs) using Bacillus amyloliquefaciens MSR5. The cellfree supernatant of B. amyloliquefaciens acted as a stabilizing agent for the synthesis of AgNPs. The synthesized AgNPs were characterized using UV-vis spectrophotometer, PXRD, FTIR, SEM-EDX, DLS, and TEM. TEM image showed the spherical shape of the biosynthesized AgNPs and it was found to be 20-40 nm in range. In this study, the AgNPs were prepared by ultrasonic irradiation. The stability of the AgNPs was found to be -33.4 mV using zeta potential. The catalytic 4-nitrophenol (4-NP) degradation by AgNPs was examined under solar irradiation and furthermore, the effects of several degradation parameters were studied. The biosynthesized AgNPs exhibited a strong chemocatalytic action with a comprehensive degradation (98%) of 4-NP to 4-aminophenol (4-AP) using NaBH₄ within 15 min. In addition, MTT assay was performed to evaluate the cytotoxicity of the biosynthesized AgNPs (10 - 200 μg). The results have shown that the AgNPs exhibited significant activity on A549 cells, which was dosedependent. The study elucidates the AgNPs synthesized using cellfree culture supernatant can be used for the elimination of hazardous pollutants from wastewater.

Recombinant l-Asparaginase II from Lactobacillus casei subsp. casei ATCC 393 and Its Anticancer Activity

l-asparaginases from bacterial origin are employed extensively in leukemic treatment and food industry. The present study focuses on the characterization of the recombinant l-asparaginase II from Lactobacillus casei subsp. casei ATCC 393 cloned into Escherichia coli expression system and purified using Ni-NTA chromatography. The recombinant l-asparaginase as a monomer had a molecular weight of 35 kDa. The enzyme was active from 10 to 80 °C with the optimum at 40 °C. The enzyme retained its activity at 28 °C and 37 °C up to 24 h. The enzyme had optimum pH of 6 and retained 50% activity till 18 h. The K_m of the recombinant enzyme was 0.01235 mM and V_max 1.576 mM/min. The half life of recombinant l-asparaginase II in human serum was 44 h and trypsin was for 15 min. The LC-MS/MS analysis revealed the molecular weight of 35,050 and pI of 5.64. The secondary structure prediction using CD spectroscopy for the recombinant enzyme showed 33.5% α-helix, 66.5% turn and 0% β sheets. The cytotoxicity of the recombinant enzyme was analysed against MOLT 3, Jurkat E6.1 and K-562 with the IC 50 value of 30, 62.5 and 50 µg/ml.

Nattokinase: an updated critical review on challenges and perspectives

Natto, a fermented soybean food, has been consumed by oriental people for more than 1000 years. Nattokinase, formerly called subtilisin NAT is a well studied protease of microbial origin that possesses fibrinolytic (anti-clotting) activities. Due to its strong fibrinolytic and thrombolytic activity, Nattokinase is regarded as a precious dietary supplement or nutraceutical for the oral thrombolytic therapy. Nattokinase is witnessed to be a useful enzyme for the com-plete removal of the vitreous and associated proliferative tissues in proliferative vitreo retinal disorders. This review focuses on the native and recombinant Nattokinase from bacteria and other sources, their production, purification, immobilization and nano-immobilization studies, which aid in ameliorating their properties to suit the targeted industrial applications. Recent development in these fields are presented and discussed, and prospective developments are suggested.

Kinetic studies on exploring lactose hydrolysis potential of β galactosidase extracted from Lactobacillus plantarum HF571129

A novel intracellular β-galactosidases produced by Lactobacillus plantarum HF571129, isolated from an Indian traditional fermented milk product curd was purified and characterized. The β-galactosidases is a hetrodimer with a molecular weight of 60 kDa (larger subunit) and 42 kDa (smaller subunit), as estimated by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE). The enzyme was purified 7.23 fold by ultrasonication, ultrafiltration and gel filtration chromatography with an overall recovery of 30.41 %. The optimum temperature for hydrolysis of its preferred substrates, o-nitrophenyl- β-D-galactopyranoside (ONPG) and lactose, are 50 °C (both), and optimum pH for these reactions is 6.5 and 7.5, respectively. The β-galactosidases showed higher affinity for ONPG (Km, 6.644 mM) as compared to lactose (Km, 23.28 mM). Galactose, the end product of lactose hydrolysis was found to be inhibited (47 %). The enzyme activity was drastically altered by the metal ion chelators EDTA, representing that this enzyme is a metalloenzyme. The enzyme was activated to a larger extent by Mg(2+) (73 % at 1 mM), while inhibited at higher concentrations of Na(+) (54 % at 100 mM), K(+) (16 % at 100 mM) and urea (16 % at 100 mM). The thermal stability study indicated an inactivation energy of Ed = 171.37 kJ mol(-1). Thermodynamic parameters such as ∆H, ∆S and ∆G, were determined as a function of temperature. About 88 % of lactose was hydrolyzed at room temperature within 1 h. The study suggested that this enzyme showed its obvious superiority in the industrial lactose conversion process.

Studies on heavy metal removal efficiency and antibacterial activity of chitosan prepared from shrimp shell waste

Chitosan, a natural biopolymer composed of a linear polysaccharide of α (1–4)-linked 2-amino 2-deoxy β-d glucopyranose was synthesized by deacetylation of chitin, which is one of the major structural elements, that forms the exoskeleton of crustacean shrimps. The present study was undertaken to prepare chitosan from shrimp shell waste. The physiochemical properties like degree of deacetylation (74.82 %), ash content (2.28 %), and yield (17 %) of prepared chitosan indicated that that shrimp shell waste is a good source of chitosan. Functional property like water-binding capacity (1,136 %) and fat-binding capacity (772 %) of prepared chitosan are in total concurrence with commercially available chitosan. Fourier Transform Infra Red spectrum shows characteristic peaks of amide at 1,629.85 cm⁻¹ and hydroxyl at 3,450.65 cm⁻¹. X-ray diffraction pattern was employed to characterize the crystallinity of prepared chitosan and it indicated two characteristic peaks at 10° and 20° at (2θ). Scanning electron microscopy analysis was performed to determine the surface morphology. Heavy metal removal efficiency of prepared chitosan was determined using atomic absorption spectrophotometer. Chitosan was found to be effective in removing metal ions Cu(II), Zn(II), Fe(II) and Cr(IV) from industrial effluent. Antibacterial activity of the prepared chitosan was also determined against Xanthomonas sp. isolated from leaves affected with citrus canker.