1
|
Minimizing the diffusivity difference between vacancies and interstitials in multi-principal element alloys. Proc Natl Acad Sci U S A 2024; 121:e2314248121. [PMID: 38266045 PMCID: PMC10835040 DOI: 10.1073/pnas.2314248121] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/17/2023] [Accepted: 12/04/2023] [Indexed: 01/26/2024] Open
Abstract
Interstitial atoms usually diffuse much faster than vacancies, which is often the root cause for the ineffective recombination of point defects in metals under irradiation. Here, via ab initio modeling of single-defect diffusion behavior in the equiatomic NiCoCrFe(Pd) alloy, we demonstrate an alloy design strategy that can reduce the diffusivity difference between the two types of point defects. The two diffusivities become almost equal after substituting the NiCoCrFe base alloy with Pd. The underlying mechanism is that Pd, with a much larger atomic size (hence larger compressibility) than the rest of the constituents, not only heightens the activation energy barrier (Ea) for interstitial motion by narrowing the diffusion channels but simultaneously also reduces Ea for vacancies due to less energy penalty required for bond length change between the initial and the saddle states. Our findings have a broad implication that the dynamics of point defects can be manipulated by taking advantage of the atomic size disparity, to facilitate point-defect annihilation that suppresses void formation and swelling, thereby improving radiation tolerance.
Collapse
|
2
|
Lifestyle behaviour patterns in the prevention of type 2 diabetes mellitus: the Fukushima Health Database 2015-2020. Public Health 2023; 224:98-105. [PMID: 37742586 DOI: 10.1016/j.puhe.2023.08.026] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/06/2023] [Revised: 07/23/2023] [Accepted: 08/22/2023] [Indexed: 09/26/2023]
Abstract
OBJECTIVES Lifestyle behaviours associated with the incidence of type 2 diabetes mellitus (T2DM) need further clarification using health insurance data. STUDY DESIGN This is a cohort study. METHODS In 2015, 193,246 participants aged 40-74 years attended the specific health checkups and were observed up to 2020 in Fukushima, Japan. Using the principal component analysis, we identified two patterns from ten lifestyle behaviour questions, namely, the "diet-smoking" pattern (including smoking, alcohol drinking, skipping breakfast, eating fast, late dinner, and snacking) and the "physical activity-sleep" pattern (including physical exercise, walking equivalent activity, walking fast, and sufficient sleep). Then, individual pattern scores were calculated; the higher the scores, the healthier the behaviours. RESULTS The accumulative incidence rate of T2DM was 630.5 in men and 391.9 in women per 100,000 person-years in an average of 4 years of follow-up. Adjusted for the demographic and cardiometabolic factors at the baseline, the hazard ratio (95% confidence interval) of the highest versus lowest quartile scores of the "diet-smoking" pattern for T2DM risk was 0.82 (0.72, 0.92; P for trend = 0.002) in men and 0.87 (0.76, 1·00; P for trend = 0.034) in women; that of the "physical activity-sleep" pattern was 0.92 (0.82, 1·04; P for trend = 0.0996) in men and 0.92 (0.80, 1·06; P for trend = 0.372) in women. The "physical activity-sleep" pattern showed a significant inverse association in non-overweight men. CONCLUSIONS Lifestyle behaviour associated with a healthy diet and lack of smoking may significantly lower the risk of T2DM in middle-aged Japanese adults.
Collapse
|
3
|
Effect of local chemical order on the irradiation-induced defect evolution in CrCoNi medium-entropy alloy. Proc Natl Acad Sci U S A 2023; 120:e2218673120. [PMID: 37014854 PMCID: PMC10104586 DOI: 10.1073/pnas.2218673120] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/01/2022] [Accepted: 02/27/2023] [Indexed: 04/05/2023] Open
Abstract
High- (and medium-) entropy alloys have emerged as potentially suitable structural materials for nuclear applications, particularly as they appear to show promising irradiation resistance. Recent studies have provided evidence of the presence of local chemical order (LCO) as a salient feature of these complex concentrated solid-solution alloys. However, the influence of such LCO on their irradiation response has remained uncertain thus far. In this work, we combine ion irradiation experiments with large-scale atomistic simulations to reveal that the presence of chemical short-range order, developed as an early stage of LCO, slows down the formation and evolution of point defects in the equiatomic medium-entropy alloy CrCoNi during irradiation. In particular, the irradiation-induced vacancies and interstitials exhibit a smaller difference in their mobility, arising from a stronger effect of LCO in localizing interstitial diffusion. This effect promotes their recombination as the LCO serves to tune the migration energy barriers of these point defects, thereby delaying the initiation of damage. These findings imply that local chemical ordering may provide a variable in the design space to enhance the resistance of multi-principal element alloys to irradiation damage.
Collapse
|
4
|
Prevalence trends of metabolic syndrome in residents of postdisaster Fukushima: a longitudinal analysis of Fukushima Health Database 2012-2019. Public Health 2023; 217:115-124. [PMID: 36878120 DOI: 10.1016/j.puhe.2023.01.036] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/05/2022] [Revised: 12/08/2022] [Accepted: 01/31/2023] [Indexed: 03/07/2023]
Abstract
OBJECTIVES The study aimed to evaluate the long-term metabolic risk profiles of Fukushima residents after the Great East Japan Earthquake of March 2011. STUDY DESIGN This was a cross-sectional and a longitudinal design. METHODS The Fukushima Health Database (FDB) contains 2,331,319 annual health checkup records of participants aged 40-74 years between 2012 and 2019. We checked the validity of the FDB by comparing the prevalence of metabolic factors with the National Database of Health Insurance Claims and Specific Health Checkups (NDB). We applied a regression analysis to determine the changes and project the trends of metabolic factors over the years. RESULTS Compared to the NDB, the prevalence of metabolic factors in Fukushima was higher than the country average from 2013 to 2018, and they showed the same trends as those from the FDB. The prevalence of metabolic syndrome (MetS) increased from 18.9% in 2012 to 21.4% in 2019 (an annual increase of 2.74%) in men and from 6.8 to 7.4% (an annual increase of 1.80%) in women in Fukushima. The standardized prevalence of MetS, being overweight, and diabetes is projected to continue increasing, with disparities among subareas being higher in evacuees than in non-evacuees. An annual decrease of 0.38-1.97% in hypertension was mainly observed in women. CONCLUSIONS The prevalence of metabolic risk is higher in Fukushima as compared to the country average. The increasing metabolic risk in subareas, including the evacuation zone, highlights the need to control MetS in Fukushima residents.
Collapse
|
5
|
175 Impact of childhood atopic dermatitis on cognition and achievement. J Invest Dermatol 2022. [DOI: 10.1016/j.jid.2022.05.182] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
6
|
Predicting orientation-dependent plastic susceptibility from static structure in amorphous solids via deep learning. Nat Commun 2021; 12:1506. [PMID: 33686082 PMCID: PMC7940643 DOI: 10.1038/s41467-021-21806-z] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/28/2020] [Accepted: 02/12/2021] [Indexed: 11/25/2022] Open
Abstract
It has been a long-standing materials science challenge to establish structure-property relations in amorphous solids. Here we introduce a rotationally non-invariant local structure representation that enables different predictions for different loading orientations, which is found essential for high-fidelity prediction of the propensity for stress-driven shear transformations. This novel structure representation, when combined with convolutional neural network (CNN), a powerful deep learning algorithm, leads to unprecedented accuracy for identifying atoms with high propensity for shear transformations (i.e., plastic susceptibility), solely from the static structure in both two- and three-dimensional model glasses. The data-driven models trained on samples at one composition and a given processing history are found transferrable to glass samples with different processing histories or at different compositions in the same alloy system. Our analysis of the new structure representation also provides valuable insight into key atomic packing features that influence the local mechanical response and its anisotropy in glasses.
Collapse
|
7
|
Spinodal-modulated solid solution delivers a strong and ductile refractory high-entropy alloy. MATERIALS HORIZONS 2021; 8:948-955. [PMID: 34821325 DOI: 10.1039/d0mh01341b] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Body-centered-cubic (BCC) refractory high-entropy alloys (RHEAs) are being actively pursued due to their potential to outperform existing superalloys at elevated temperatures. One bottleneck problem, however, is that these RHEAs lack tensile ductility and, hence, processability at room temperature. The strategy previously invoked to sustain ductility in high-strength HEAs is to manage dislocation movements via incorporating dispersed obstacles; this, however, may also have embrittlement ramifications. Here, a new strategy is demonstrated to achieve ductile BCC HfNbTiV, via decomposing the BCC arrangement (β phase) into a β(BCC1) + β*(BCC2) arrangement via spinodal decomposition, producing chemical composition modulations and, more importantly, elastic strain on a length scale of a few tens of nanometers. The periodically spaced β*, with large lattice distortion, is particularly potent in heightening the ruggedness of the terrain for the passage of dislocations. This makes the motion of dislocations sluggish, causing a traffic jam and cross-slip, facilitating dislocation interactions, multiplication, and accumulation. Wavy dislocations form walls that entangle with slip bands, promoting strain hardening and delocalizing plastic strain. A simultaneous combination of high yield strength (1.1 GPa) and tensile strain to failure (28%) is achieved; these values are among the best reported so far for refractory high-entropy alloys.
Collapse
|
8
|
Development of a cost-effective automated platform to produce human liver spheroids for basic and applied research. Biofabrication 2020; 13:015009. [PMID: 33007774 DOI: 10.1088/1758-5090/abbdb2] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/08/2020] [Accepted: 10/02/2020] [Indexed: 12/14/2022]
Abstract
Liver disease represents an increasing cause of global morbidity and mortality. Currently, liver transplant is the only treatment curative for end-stage liver disease. Donor organs cannot meet the demand and therefore scalable treatments and new disease models are required to improve clinical intervention. Pluripotent stem cells represent a renewable source of human tissue. Recent advances in three-dimensional cell culture have provided the field with more complex systems that better mimic liver physiology and function. Despite these improvements, current cell-based models are variable in performance and expensive to manufacture at scale. This is due, in part, to the use of poorly defined or cross-species materials within the process, severely affecting technology translation. To address this issue, we have developed an automated and economical platform to produce liver tissue at scale for modelling disease and small molecule screening. Stem cell derived liver spheres were formed by combining hepatic progenitors with endothelial cells and stellate cells, in the ratios found within the liver. The resulting tissue permitted the study of human liver biology 'in the dish' and could be scaled for screening. In summary, we have developed an automated differentiation system that permits reliable self-assembly of human liver tissue for biomedical application. Going forward we believe that this technology will not only serve as anin vitroresource, and may have an important role to play in supporting failing liver function in humans.
Collapse
|
9
|
Large plasticity in magnesium mediated by pyramidal dislocations. Science 2020; 365:73-75. [PMID: 31273119 DOI: 10.1126/science.aaw2843] [Citation(s) in RCA: 27] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/05/2018] [Accepted: 05/08/2019] [Indexed: 11/03/2022]
Abstract
Lightweight magnesium alloys are attractive as structural materials for improving energy efficiency in applications such as weight reduction of transportation vehicles. One major obstacle for widespread applications is the limited ductility of magnesium, which has been attributed to [Formula: see text] dislocations failing to accommodate plastic strain. We demonstrate, using in situ transmission electron microscope mechanical testing, that [Formula: see text] dislocations of various characters can accommodate considerable plasticity through gliding on pyramidal planes. We found that submicrometer-size magnesium samples exhibit high plasticity that is far greater than for their bulk counterparts. Small crystal size usually brings high stress, which in turn activates more [Formula: see text] dislocations in magnesium to accommodate plasticity, leading to both high strength and good plasticity.
Collapse
|
10
|
Rafting-Enabled Recovery Avoids Recrystallization in 3D-Printing-Repaired Single-Crystal Superalloys. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1907164. [PMID: 32077540 DOI: 10.1002/adma.201907164] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2019] [Revised: 12/18/2019] [Indexed: 06/10/2023]
Abstract
The repair of damaged Ni-based superalloy single-crystal turbine blades has been a long-standing challenge. Additive manufacturing by an electron beam is promising to this end, but there is a formidable obstacle: either the residual stress and γ/γ ' microstructure in the single-crystalline fusion zone after e-beam melting are unacceptable (e.g., prone to cracking), or, after solutionizing heat treatment, recrystallization occurs, bringing forth new grains that degrade the high-temperature creep properties. Here, a post-3D printing recovery protocol is designed that eliminates the driving force for recrystallization, namely, the stored energy associated with the high retained dislocation density, prior to standard solution treatment and aging. The post-electron-beam-melting, pre-solutionizing recovery via sub-solvus annealing is rendered possible by the rafting (i.e., directional coarsening) of γ ' particles that facilitates dislocation rearrangement and annihilation. The rafted microstructure is removed in subsequent solution treatment, leaving behind a damage-free and residual-stress-free single crystal with uniform γ ' precipitates indistinguishable from the rest of the turbine blade. This discovery offers a practical means to keep 3D-printed single crystals from cracking due to unrelieved residual stress, or stress-relieved but recrystallizing into a polycrystalline microstructure, paving the way for additive manufacturing to repair, restore, and reshape any superalloy single-crystal product.
Collapse
|
11
|
Tailoring heterogeneities in high-entropy alloys to promote strength-ductility synergy. Nat Commun 2019; 10:5623. [PMID: 31819051 PMCID: PMC6901531 DOI: 10.1038/s41467-019-13311-1] [Citation(s) in RCA: 38] [Impact Index Per Article: 7.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2019] [Accepted: 11/01/2019] [Indexed: 11/09/2022] Open
Abstract
Conventional alloys are usually based on a single host metal. Recent high-entropy alloys (HEAs), in contrast, employ multiple principal elements. The strength of HEAs is considerably higher than traditional solid solutions, as the many constituents lead to a rugged energy landscape that increases the resistance to dislocation motion, which can also be retarded by other heterogeneities. The wide variety of nanostructured heterogeneities in HEAs, including those generated on the fly during tensile straining, also offer elevated strain-hardening capability that promotes uniform tensile ductility. Citing recent examples, this review explores the multiple levels of heterogeneities in multi-principal-element alloys that contribute to lattice friction and back stress hardening, as a general strategy towards strength-ductility synergy beyond current benchmark ranges.
Collapse
|
12
|
Controlled growth of single-crystalline metal nanowires via thermomigration across a nanoscale junction. Nat Commun 2019; 10:4478. [PMID: 31578322 PMCID: PMC6775085 DOI: 10.1038/s41467-019-12416-x] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/11/2019] [Accepted: 09/04/2019] [Indexed: 11/09/2022] Open
Abstract
Mass transport driven by temperature gradient is commonly seen in fluids. However, here we demonstrate that when drawing a cold nano-tip off a hot solid substrate, thermomigration can be so rampant that it can be exploited for producing single-crystalline aluminum, copper, silver and tin nanowires. This demonstrates that in nanoscale objects, solids can mimic liquids in rapid morphological changes, by virtue of fast surface diffusion across short distances. During uniform growth, a thin neck-shaped ligament containing a grain boundary (GB) usually forms between the hot and the cold ends, sustaining an extremely high temperature gradient that should have driven even larger mass flux, if not counteracted by the relative sluggishness of plating into the GB and the resulting back stress. This GB-containing ligament is quite robust and can adapt to varying drawing directions and velocities, imparting good controllability to the nanowire growth in a manner akin to Czochralski crystal growth.
Collapse
|
13
|
Phase-change heterostructure enables ultralow noise and drift for memory operation. Science 2019; 366:210-215. [DOI: 10.1126/science.aay0291] [Citation(s) in RCA: 161] [Impact Index Per Article: 32.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2019] [Accepted: 08/08/2019] [Indexed: 12/13/2022]
Abstract
Artificial intelligence and other data-intensive applications have escalated the demand for data storage and processing. New computing devices, such as phase-change random access memory (PCRAM)–based neuro-inspired devices, are promising options for breaking the von Neumann barrier by unifying storage with computing in memory cells. However, current PCRAM devices have considerable noise and drift in electrical resistance that erodes the precision and consistency of these devices. We designed a phase-change heterostructure (PCH) that consists of alternately stacked phase-change and confinement nanolayers to suppress the noise and drift, allowing reliable iterative RESET and cumulative SET operations for high-performance neuro-inspired computing. Our PCH architecture is amenable to industrial production as an intrinsic materials solution, without complex manufacturing procedure or much increased fabrication cost.
Collapse
|
14
|
|
15
|
Abstract P5-09-12: Germline mutation in TP53 gene in a cohort of 2,561 Chinese high-risk breast cancer patients using multigene panel testing. Cancer Res 2019. [DOI: 10.1158/1538-7445.sabcs18-p5-09-12] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Abstract
Background: Li-Fraumeni syndrome (LFS) is a rare autosomal genetic disorder with germline TP53 mutations. Patients with TP53 mutations have a higher risk of developing breast cancer than those harboring BRCA mutations. Although limited studies have shown that TP53 mutation carriers are less responsive to low dose radiation and more susceptible to induce new malignancies from radiotherapy. Moreover screening strategies allows early detection of a spectrum of cancers related to TP53 mutations. From work of BRCA mutations where over 40% novel mutations were detected in Chinese cohort, it is important to evaluate the frequency of TP53 mutation in Chinese to better understand the spectrum to guide appropriate clinical management of these high risk individuals.
Methods: TP53 gene mutation screening was performed on 2,561 high-risk breast cancer patients using multigene panel testing. The patients were accrued by Hong Kong Hereditary and High Risk Breast Cancer Program from March 2007 to May 2018. All detected pathogenic mutations were further validated by bi-directional DNA sequencing and analyzed by our in-house developed bioinformatics pipeline.
Results: Sixteen distinct pathogenic or likely pathogenic variants were identified, and 3 of them were de novo TP53 mutations (18.75%). The mean age of patients who harbored TP53 mutation was 30.44 years (range 18-44), and 50% of the tumors were bilateral breast cancer. Of sixteen different pathogenic mutations, majority of them were missense mutation (87.5%), and 2 were nonsense mutation (12.5%). Four of the sixteen TP53 mutation carriers had family history of breast cancer, while others had a family history of lung cancer (43.75%).
Conclusion: This study revealed that seven patients were found to habor TP53 mutation even when they did not meet the criteria of LFS of LFS-like phenotype, implicated the importance of using multigene panel test for probands and their relatives to offer a comprehensive surveillance programe for TP53 carriers.
Citation Format: Kwong A, Shin V, Au CH, Ho C, Slavin T, Weitzel J, Chan TL, Ma E. Germline mutation in TP53 gene in a cohort of 2,561 Chinese high-risk breast cancer patients using multigene panel testing [abstract]. In: Proceedings of the 2018 San Antonio Breast Cancer Symposium; 2018 Dec 4-8; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2019;79(4 Suppl):Abstract nr P5-09-12.
Collapse
|
16
|
Structural Parameter of Orientational Order to Predict the Boson Vibrational Anomaly in Glasses. PHYSICAL REVIEW LETTERS 2019; 122:015501. [PMID: 31012708 DOI: 10.1103/physrevlett.122.015501] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/01/2018] [Indexed: 06/09/2023]
Abstract
It has so far remained a major challenge to quantitatively predict the boson peak, a THz vibrational anomaly universal for glasses, from features in the amorphous structure. Using molecular dynamics simulations of a model Cu_{50}Zr_{50} glass, we decompose the boson peak to contributions from atoms residing in different types of Voronoi polyhedra. We then introduce a microscopic structural parameter to depict the "orientational order," using the vector pointing from the center atom to the farthest vertex of its Voronoi coordination polyhedron. This order parameter represents the most probable direction of transverse vibration at low frequencies. Its magnitude scales linearly with the boson peak intensity, and its spatial distribution accounts for the quasilocalized modes. This correlation is shown to be universal for different types of glasses.
Collapse
|
17
|
Universal intracellular biomolecule delivery with precise dosage control. SCIENCE ADVANCES 2018; 4:eaat8131. [PMID: 30402539 PMCID: PMC6209385 DOI: 10.1126/sciadv.aat8131] [Citation(s) in RCA: 78] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/10/2018] [Accepted: 10/02/2018] [Indexed: 05/06/2023]
Abstract
Intracellular delivery of mRNA, DNA, and other large macromolecules into cells plays an essential role in an array of biological research and clinical therapies. However, current methods yield a wide variation in the amount of material delivered, as well as limitations on the cell types and cargoes possible. Here, we demonstrate quantitatively controlled delivery into a range of primary cells and cell lines with a tight dosage distribution using a nanostraw-electroporation system (NES). In NES, cells are cultured onto track-etched membranes with protruding nanostraws that connect to the fluidic environment beneath the membrane. The tight cell-nanostraw interface focuses applied electric fields to the cell membrane, enabling low-voltage and nondamaging local poration of the cell membrane. Concurrently, the field electrophoretically injects biomolecular cargoes through the nanostraws and into the cell at the same location. We show that the amount of material delivered is precisely controlled by the applied voltage, delivery duration, and reagent concentration. NES is highly effective even for primary cell types or different cell densities, is largely cargo agnostic, and can simultaneously deliver specific ratios of different molecules. Using a simple cell culture well format, the NES delivers into >100,000 cells within 20 s with >95% cell viability, enabling facile, dosage-controlled intracellular delivery for a wide variety of biological applications.
Collapse
|
18
|
|
19
|
New twinning route in face-centered cubic nanocrystalline metals. Nat Commun 2017; 8:2142. [PMID: 29247224 PMCID: PMC5732218 DOI: 10.1038/s41467-017-02393-4] [Citation(s) in RCA: 33] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/10/2017] [Accepted: 11/24/2017] [Indexed: 12/01/2022] Open
Abstract
Twin nucleation in a face-centered cubic crystal is believed to be accomplished through the formation of twinning partial dislocations on consecutive atomic planes. Twinning should thus be highly unfavorable in face-centered cubic metals with high twin-fault energy barriers, such as Al, Ni, and Pt, but instead is often observed. Here, we report an in situ atomic-scale observation of twin nucleation in nanocrystalline Pt. Unlike the classical twinning route, deformation twinning initiated through the formation of two stacking faults separated by a single atomic layer, and proceeded with the emission of a partial dislocation in between these two stacking faults. Through this route, a three-layer twin was nucleated without a mandatory layer-by-layer twinning process. This route is facilitated by grain boundaries, abundant in nanocrystalline metals, that promote the nucleation of separated but closely spaced partial dislocations, thus enabling an effective bypassing of the high twin-fault energy barrier.
Collapse
|
20
|
Reducing the stochasticity of crystal nucleation to enable subnanosecond memory writing. Science 2017; 358:1423-1427. [PMID: 29123020 DOI: 10.1126/science.aao3212] [Citation(s) in RCA: 132] [Impact Index Per Article: 18.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/07/2017] [Accepted: 10/30/2017] [Indexed: 01/26/2023]
Abstract
Operation speed is a key challenge in phase-change random-access memory (PCRAM) technology, especially for achieving subnanosecond high-speed cache memory. Commercialized PCRAM products are limited by the tens of nanoseconds writing speed, originating from the stochastic crystal nucleation during the crystallization of amorphous germanium antimony telluride (Ge2Sb2Te5). Here, we demonstrate an alloying strategy to speed up the crystallization kinetics. The scandium antimony telluride (Sc0.2Sb2Te3) compound that we designed allows a writing speed of only 700 picoseconds without preprogramming in a large conventional PCRAM device. This ultrafast crystallization stems from the reduced stochasticity of nucleation through geometrically matched and robust scandium telluride (ScTe) chemical bonds that stabilize crystal precursors in the amorphous state. Controlling nucleation through alloy design paves the way for the development of cache-type PCRAM technology to boost the working efficiency of computing systems.
Collapse
|
21
|
Melt fluxing to elevate the forming ability of Al-based bulk metallic glasses. Sci Rep 2017; 7:11053. [PMID: 28887538 PMCID: PMC5591232 DOI: 10.1038/s41598-017-11504-6] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2017] [Accepted: 08/25/2017] [Indexed: 01/10/2023] Open
Abstract
Salt-fluxing treatment is an effective technique to improve the glass-forming ability (GFA) of bulk metallic glass (BMG)-forming melts, as demonstrated before in Pd- and Fe-based systems. However, it has been challenging to develop similar fluxing protocol for more reactive melts, such as Al-rich BMG-forming systems. Here we design new fluxing agents, from a thermodynamics perspective that takes into account combined effects of physical absorption and chemical absorption (reaction) between the fluxing agents and oxide inclusions. MgCl2-CaCl2 composite salts were selected, and their fluxing effects were systematically studied on an Al86Ni6.75Co2.25Y3.25La1.75 alloy, the best BMG-forming composition reported thus far for Al-rich alloy systems. The oxygen content was found to continuously decrease in the master alloy with increasing cycles of salt-fluxing treatment, with chlorate products on the surface suggesting concurrent physical absorption and chemical reaction. The fluxing treatment developed has enabled a record critical size (diameter) of 2.5 mm for Al-based BMGs. Our finding is thus an advance in developing highly desirable Al-based BMGs, and also provides guidance for designing processing protocol to produce larger-sized BMGs in other reactive systems.
Collapse
|
22
|
Identification of germline mutation using 30-gene sequencing and clinical characteristic of Chinese with hereditary breast cancer. Ann Oncol 2017. [DOI: 10.1093/annonc/mdx363.060] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/14/2022] Open
|
23
|
A Second Amorphous Layer Underneath Surface Oxide. MICROSCOPY AND MICROANALYSIS : THE OFFICIAL JOURNAL OF MICROSCOPY SOCIETY OF AMERICA, MICROBEAM ANALYSIS SOCIETY, MICROSCOPICAL SOCIETY OF CANADA 2017; 23:173-178. [PMID: 28228170 DOI: 10.1017/s143192761700006x] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Formation of a nanometer-scale oxide surface layer is common when a material is exposed to oxygen-containing environment. Employing aberration-corrected analytical transmission electron microscopy and using single crystal SnSe as an example, we show that for an alloy, a second thin amorphous layer can appear underneath the outmost oxide layer. This inner amorphous layer is not oxide based, but instead originates from solid-state amorphization of the base alloy when its free energy rises to above that of the metastable amorphous state; which is a result of the composition shift due to the preferential depletion of the oxidizing species, in our case, the outgoing Sn reacting with the oxygen atmosphere.
Collapse
|
24
|
Helium Ion Microscope Fabrication Causing Changes in the Structure and Mechanical Behavior of Silicon Micropillars. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2017; 13:1601753. [PMID: 27709779 DOI: 10.1002/smll.201601753] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/25/2016] [Revised: 07/11/2016] [Indexed: 06/06/2023]
Abstract
Silicon is used as a prominent case to demonstrate the dramatic effects of helium ion microscope nanofabrication. Structurally, a submicrometer Si pillar can turn completely amorphous at He+ doses typically used for micromachining, forming nanobubbles at higher doses. In terms of mechanical properties, the flow stress decreases markedly with increasing dosage, and the softened amorphous Si exhibits spread-out plastic flow.
Collapse
|
25
|
Universal structural parameter to quantitatively predict metallic glass properties. Nat Commun 2016; 7:13733. [PMID: 27941922 PMCID: PMC5159863 DOI: 10.1038/ncomms13733] [Citation(s) in RCA: 95] [Impact Index Per Article: 11.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/28/2016] [Accepted: 10/27/2016] [Indexed: 11/09/2022] Open
Abstract
Quantitatively correlating the amorphous structure in metallic glasses (MGs) with their physical properties has been a long-sought goal. Here we introduce ‘flexibility volume' as a universal indicator, to bridge the structural state the MG is in with its properties, on both atomic and macroscopic levels. The flexibility volume combines static atomic volume with dynamics information via atomic vibrations that probe local configurational space and interaction between neighbouring atoms. We demonstrate that flexibility volume is a physically appropriate parameter that can quantitatively predict the shear modulus, which is at the heart of many key properties of MGs. Moreover, the new parameter correlates strongly with atomic packing topology, and also with the activation energy for thermally activated relaxation and the propensity for stress-driven shear transformations. These correlations are expected to be robust across a very wide range of MG compositions, processing conditions and length scales.
Various known structural descriptors of metallic glasses have limitations in quantitatively predicting properties. Here authors define a physically-motivated measure and show it to correlate strongly with elastic properties, local structure and relaxation kinetics over a wide range of simulated compositions.
Collapse
|
26
|
Nanobubble Fragmentation and Bubble-Free-Channel Shear Localization in Helium-Irradiated Submicron-Sized Copper. PHYSICAL REVIEW LETTERS 2016; 117:215501. [PMID: 27911524 DOI: 10.1103/physrevlett.117.215501] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/11/2016] [Indexed: 06/06/2023]
Abstract
Helium bubbles are one of the typical radiation microstructures in metals and alloys, significantly influencing their deformation behavior. However, the dynamic evolution of helium bubbles under straining is less explored so far. Here, by using in situ micromechanical testing inside a transmission electron microscope, we discover that the helium bubble not only can coalesce with adjacent bubbles, but also can split into several nanoscale bubbles under tension. Alignment of the splittings along a slip line can create a bubble-free channel, which appears softer, promotes shear localization, and accelerates the failure in the shearing-off mode. Detailed analyses unveil that the unexpected bubble fragmentation is mediated by the combination of dislocation cutting and internal surface diffusion, which is an alternative microdamage mechanism of helium irradiated copper besides the bubble coalescence.
Collapse
|
27
|
Surface Rebound of Relativistic Dislocations Directly and Efficiently Initiates Deformation Twinning. PHYSICAL REVIEW LETTERS 2016; 117:165501. [PMID: 27792389 DOI: 10.1103/physrevlett.117.165501] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/24/2016] [Indexed: 06/06/2023]
Abstract
Under ultrahigh stresses (e.g., under high strain rates or in small-volume metals) deformation twinning (DT) initiates on a very short time scale, indicating strong spatial-temporal correlations in dislocation dynamics. Using atomistic simulations, here we demonstrate that surface rebound of relativistic dislocations directly and efficiently triggers DT under a wide range of laboratory experimental conditions. Because of its stronger temporal correlation, surface rebound sustained relay of partial dislocations is shown to be dominant over the conventional mechanism of thermally activated nucleation of twinning dislocations.
Collapse
|
28
|
Radiation-Induced Helium Nanobubbles Enhance Ductility in Submicron-Sized Single-Crystalline Copper. NANO LETTERS 2016; 16:4118-4124. [PMID: 27249672 DOI: 10.1021/acs.nanolett.6b00864] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The workability and ductility of metals usually degrade with exposure to irradiation, hence the phrase "radiation damage". Here, we found that helium (He) radiation can actually enhance the room-temperature deformability of submicron-sized copper. In particular, Cu single crystals with diameter of 100-300 nm and containing numerous pressurized sub-10 nm He bubbles become stronger, more stable in plastic flow and ductile in tension, compared to fully dense samples of the same dimensions that tend to display plastic instability (strain bursts). The sub-10 nm He bubbles are seen to be dislocation sources as well as shearable obstacles, which promote dislocation storage and reduce dislocation mean free path, thus contributing to more homogeneous and stable plasticity. Failure happens abruptly only after significant bubble coalescence. The current findings can be explained in light of Weibull statistics of failure and the beneficial effects of bubbles on plasticity. These results shed light on plasticity and damage developments in metals and could open new avenues for making mechanically robust nano- and microstructures by ion beam processing and He bubble engineering.
Collapse
|
29
|
Growth Conditions Control the Elastic and Electrical Properties of ZnO Nanowires. NANO LETTERS 2015; 15:7886-92. [PMID: 26510098 DOI: 10.1021/acs.nanolett.5b02852] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/11/2023]
Abstract
Great efforts have been made to synthesize ZnO nanowires (NWs) as building blocks for a broad range of applications because of their unique mechanical and mechanoelectrical properties. However, little attention has been paid to the correlation between the NWs synthesis condition and these properties. Here we demonstrate that by slightly adjusting the NW growth conditions, the cross-sectional shape of the NWs can be tuned from hexagonal to circular. Room temperature photoluminescence spectra suggested that NWs with cylindrical geometry have a higher density of point defects. In situ transmission electron microscopy (TEM) uniaxial tensile-electrical coupling tests revealed that for similar diameter, the Young's modulus and electrical resistivity of hexagonal NWs is always larger than that of cylindrical NWs, whereas the piezoresistive coefficient of cylindrical NWs is generally higher. With decreasing diameter, the Young's modulus and the resistivity of NWs increase, whereas their piezoresistive coefficient decreases, regardless of the sample geometry. Our findings shed new light on understanding and advancing the performance of ZnO-NW-based devices through optimizing the synthesis conditions of the NWs.
Collapse
|
30
|
B23-O-14Direct observation the vacant sites in the GeSbTe metastable polycrystalline phase. Microscopy (Oxf) 2015. [DOI: 10.1093/jmicro/dfv173] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022] Open
|
31
|
The Cost Effectiveness Analysis of Electrocardiogram Screening Program for Prevention of Sudden Cardiac Death in Japan. Int J Epidemiol 2015. [DOI: 10.1093/ije/dyv096.341] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022] Open
|
32
|
In situ study of the initiation of hydrogen bubbles at the aluminium metal/oxide interface. NATURE MATERIALS 2015; 14:899-903. [PMID: 26121306 DOI: 10.1038/nmat4336] [Citation(s) in RCA: 42] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/05/2015] [Accepted: 05/25/2015] [Indexed: 05/14/2023]
Abstract
The presence of excess hydrogen at the interface between a metal substrate and a protective oxide can cause blistering and spallation of the scale. However, it remains unclear how nanoscale bubbles manage to reach the critical size in the first place. Here, we perform in situ environmental transmission electron microscopy experiments of the aluminium metal/oxide interface under hydrogen exposure. It is found that once the interface is weakened by hydrogen segregation, surface diffusion of Al atoms initiates the formation of faceted cavities on the metal side, driven by Wulff reconstruction. The morphology and growth rate of these cavities are highly sensitive to the crystallographic orientation of the aluminium substrate. Once the cavities grow to a critical size, the internal gas pressure can become great enough to blister the oxide layer. Our findings have implications for understanding hydrogen damage of interfaces.
Collapse
|
33
|
Nanodomained Nickel Unite Nanocrystal Strength with Coarse-Grain Ductility. Sci Rep 2015; 5:11728. [PMID: 26122728 PMCID: PMC4485168 DOI: 10.1038/srep11728] [Citation(s) in RCA: 81] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2014] [Accepted: 06/03/2015] [Indexed: 11/18/2022] Open
Abstract
Conventional metals are routinely hardened by grain refinement or by cold working with the expense of their ductility. Recent nanostructuring strategies have attempted to evade this strength versus ductility trade-off, but the paradox persists. It has never been possible to combine the strength reachable in nanocrystalline metals with the large uniform tensile elongation characteristic of coarse-grained metals. Here a defect engineering strategy on the nanoscale is architected to approach this ultimate combination. For Nickel, spread-out nanoscale domains (average 7 nm in diameter) were produced during electrodeposition, occupying only ~2.4% of the total volume. Yet the resulting Ni achieves a yield strength approaching 1.3 GPa, on par with the strength for nanocrystalline Ni with uniform grains. Simultaneously, the material exhibits a uniform elongation as large as ~30%, at the same level of ductile face-centered-cubic metals. Electron microscopy observations and molecular dynamics simulations demonstrate that the nanoscale domains effectively block dislocations, akin to the role of precipitates for Orowan hardening. In the meantime, the abundant domain boundaries provide dislocation sources and trapping sites of running dislocations for dislocation multiplication, and the ample space in the grain interior allows dislocation storage; a pronounced strain-hardening rate is therefore sustained to enable large uniform elongation.
Collapse
|
34
|
From "Smaller is Stronger" to "Size-Independent Strength Plateau": Towards Measuring the Ideal Strength of Iron. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2015; 27:3385-3390. [PMID: 25891267 DOI: 10.1002/adma.201500377] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2015] [Revised: 03/17/2015] [Indexed: 06/04/2023]
|
35
|
|
36
|
Twinning-like lattice reorientation without a crystallographic twinning plane. Nat Commun 2015; 5:3297. [PMID: 24522756 PMCID: PMC3929781 DOI: 10.1038/ncomms4297] [Citation(s) in RCA: 135] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2013] [Accepted: 01/22/2014] [Indexed: 11/22/2022] Open
Abstract
Twinning on the plane is a common mode of plastic deformation for hexagonal-close-packed metals. Here we report, by monitoring the deformation of submicron-sized single-crystal magnesium compressed normal to its prismatic plane with transmission electron microscopy, the reorientation of the parent lattice to a ‘twin’ lattice, producing an orientational relationship akin to that of the conventional twinning, but without a crystallographic mirror plane, and giving plastic strain that is not simple shear. Aberration-corrected transmission electron microscopy observations reveal that the boundary between the parent lattice and the ‘twin’ lattice is composed predominantly of semicoherent basal/prismatic interfaces instead of the twinning plane. The migration of this boundary is dominated by the movement of these interfaces undergoing basal/prismatic transformation via local rearrangements of atoms. This newly discovered deformation mode by boundary motion mimics conventional deformation twinning but is distinct from the latter and, as such, broadens the known mechanisms of plasticity. Deformation twinning and dislocations are known to govern the plastic behaviour of metals at room temperature. Here the authors demonstrate a new deformation mechanism in single-crystal magnesium characterized by twin-like crystal reorientation and special interfaces.
Collapse
|
37
|
|
38
|
EP-1833: Effect of PsA derivatives on DNMT inhibition and radiosensitization in U373MG glioblastoma cell line. Radiother Oncol 2014. [DOI: 10.1016/s0167-8140(15)31951-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
39
|
Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility. NATURE MATERIALS 2013; 12:344-350. [PMID: 23353630 DOI: 10.1038/nmat3544] [Citation(s) in RCA: 97] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/03/2012] [Accepted: 12/05/2012] [Indexed: 06/01/2023]
Abstract
The high-temperature stability and mechanical properties of refractory molybdenum alloys are highly desirable for a wide range of critical applications. However, a long-standing problem for these alloys is that they suffer from low ductility and limited formability. Here we report a nanostructuring strategy that achieves Mo alloys with yield strength over 800 MPa and tensile elongation as large as ~ 40% at room temperature. The processing route involves a molecular-level liquid-liquid mixing/doping technique that leads to an optimal microstructure of submicrometre grains with nanometric oxide particles uniformly distributed in the grain interior. Our approach can be readily adapted to large-scale industrial production of ductile Mo alloys that can be extensively processed and shaped at low temperatures. The architecture engineered into such multicomponent alloys offers a general pathway for manufacturing dispersion-strengthened materials with both high strength and ductility.
Collapse
|
40
|
Microstructural fingerprints of phase transitions in shock-loaded iron. Sci Rep 2013; 3:1086. [PMID: 23336068 PMCID: PMC3548189 DOI: 10.1038/srep01086] [Citation(s) in RCA: 55] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2012] [Accepted: 12/11/2012] [Indexed: 11/25/2022] Open
Abstract
The complex structural transformation in crystals under static pressure or shock loading has been a subject of long-standing interest to materials scientists and physicists. The polymorphic transformation is of particular importance for iron (Fe), due to its technological and sociological significance in the development of human civilization, as well as its prominent presence in the earth's core. The martensitic transformation α→ε (bcc→hcp) in iron under shock-loading, due to its reversible and transient nature, requires non-trivial detective work to uncover its occurrence. Here we reveal refined microstructural fingerprints, needle-like colonies and three sets of {112}<111> twins with a threefold symmetry, with tell-tale features that are indicative of two sequential martensitic transformations in the reversible α→ε phase transition, even though no ε is retained in the post-shock samples. The signature orientation relationships are consistent with previously-proposed transformation mechanisms, and the unique microstructural fingerprints enable a quantitative assessment of the volume fraction transformed.
Collapse
|
41
|
Quantitative evidence of crossover toward partial dislocation mediated plasticity in copper single crystalline nanowires. NANO LETTERS 2012; 12:4045-4049. [PMID: 22731885 DOI: 10.1021/nl3014132] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
In situ tensile tests of Cu single crystalline nanowires in a high-resolution transmission electron microscope reveal a novel effect of sample dimensions on plasticity mechanisms. When the single crystalline nanowire size was reduced to <∼150 nm, the normal full dislocation slip was taken over by partial dislocation mediated plasticity (PDMP). For the first time, we demonstrate this transition in a quantitative manner by assessing the relative contributions to plastic strain from PDMP and full dislocations. The crossover sample size is consistent, well within model predictions. This discovery represents yet another "sample size effect", beyond other reported influence of sample dimensions on the mechanical behavior of metals, such as dislocation starvation or source truncation, and the "smaller is stronger" trend.
Collapse
|
42
|
Local atomic structure in equilibrium and supercooled liquid Zr75.5Pd24.5. J Chem Phys 2012; 137:044501. [DOI: 10.1063/1.4737381] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/14/2022] Open
|
43
|
Characterizing the transmission dynamics and severity of 2009 H1N1 influenza pandemic in Hong Kong. Int J Infect Dis 2012. [DOI: 10.1016/j.ijid.2012.05.427] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022] Open
|
44
|
Pressure tunes electrical resistivity by four orders of magnitude in amorphous Ge2Sb2Te5 phase-change memory alloy. Proc Natl Acad Sci U S A 2012; 109:E1055-62. [PMID: 22509004 PMCID: PMC3344948 DOI: 10.1073/pnas.1119754109] [Citation(s) in RCA: 51] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022] Open
Abstract
Ge-Sb-Te-based phase-change memory is one of the most promising candidates to succeed the current flash memories. The application of phase-change materials for data storage and memory devices takes advantage of the fast phase transition (on the order of nanoseconds) and the large property contrasts (e.g., several orders of magnitude difference in electrical resistivity) between the amorphous and the crystalline states. Despite the importance of Ge-Sb-Te alloys and the intense research they have received, the possible phases in the temperature-pressure diagram, as well as the corresponding structure-property correlations, remain to be systematically explored. In this study, by subjecting the amorphous Ge(2)Sb(2)Te(5) (a-GST) to hydrostatic-like pressure (P), the thermodynamic variable alternative to temperature, we are able to tune its electrical resistivity by several orders of magnitude, similar to the resistivity contrast corresponding to the usually investigated amorphous-to-crystalline (a-GST to rock-salt GST) transition used in current phase-change memories. In particular, the electrical resistivity drops precipitously in the P = 0 to 8 GPa regime. A prominent structural signature representing the underlying evolution in atomic arrangements and bonding in this pressure regime, as revealed by the ab initio molecular dynamics simulations, is the reduction of low-electron-density regions, which contributes to the narrowing of band gap and delocalization of trapped electrons. At P > 8 GPa, we have observed major changes of the average local structures (bond angle and coordination numbers), gradually transforming the a-GST into a high-density, metallic-like state. This high-pressure glass is characterized by local motifs that bear similarities to the body-centered-cubic GST (bcc-GST) it eventually crystallizes into at 28 GPa, and hence represents a bcc-type polyamorph of a-GST.
Collapse
|
45
|
The design of long-term effective uranium bioremediation strategy using a community metabolic model. Biotechnol Bioeng 2012; 109:2475-83. [PMID: 22510989 DOI: 10.1002/bit.24528] [Citation(s) in RCA: 49] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/19/2012] [Revised: 03/30/2012] [Accepted: 04/06/2012] [Indexed: 11/10/2022]
Abstract
Acetate amendment at uranium contaminated sites in Rifle, CO. leads to an initial bloom of Geobacter accompanied by the removal of U(VI) from the groundwater, followed by an increase of sulfate-reducing bacteria (SRBs) which are poor reducers of U(VI). One of the challenges associated with bioremediation is the decay in Geobacter abundance, which has been attributed to the depletion of bio-accessible Fe(III), motivating the investigation of simultaneous amendments of acetate and Fe(III) as an alternative bioremediation strategy. In order to understand the community metabolism of Geobacter and SRBs during artificial substrate amendment, we have created a genome-scale dynamic community model of Geobacter and SRBs using the previously described Dynamic Multi-species Metabolic Modeling framework. Optimization techniques are used to determine the optimal acetate and Fe(III) addition profile. Field-scale simulation of acetate addition accurately predicted the in situ data. The simulations suggest that batch amendment of Fe(III) along with continuous acetate addition is insufficient to promote long-term bioremediation, while continuous amendment of Fe(III) along with continuous acetate addition is sufficient to promote long-term bioremediation. By computationally minimizing the acetate and Fe(III) addition rates as well as the difference between the predicted and target uranium concentration, we showed that it is possible to maintain the uranium concentration below the environmental safety standard while minimizing the cost of chemical additions. These simulations show that simultaneous addition of acetate and Fe(III) has the potential to be an effective uranium bioremediation strategy. They also show that computational modeling of microbial community is an important tool to design effective strategies for practical applications in environmental biotechnology.
Collapse
|
46
|
Approaching the ideal elastic limit of metallic glasses. Nat Commun 2012; 3:609. [PMID: 22215084 PMCID: PMC3272572 DOI: 10.1038/ncomms1619] [Citation(s) in RCA: 83] [Impact Index Per Article: 6.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2011] [Accepted: 11/28/2011] [Indexed: 11/09/2022] Open
Abstract
The ideal elastic limit is the upper bound to the stress and elastic strain a material can withstand. This intrinsic property has been widely studied for crystalline metals, both theoretically and experimentally. For metallic glasses, however, the ideal elastic limit remains poorly characterized and understood. Here we show that the elastic strain limit and the corresponding strength of submicron-sized metallic glass specimens are about twice as high as the already impressive elastic limit observed in bulk metallic glass samples, in line with model predictions of the ideal elastic limit of metallic glasses. We achieve this by employing an in situ transmission electron microscope tensile deformation technique. Furthermore, we propose an alternative mechanism for the apparent 'work hardening' behaviour observed in the tensile stress-strain curves.
Collapse
|
47
|
Transmissibility of pandemic H1N1 and genetically related swine influenza viruses in ferrets. BMC Proc 2011. [DOI: 10.1186/1753-6561-5-s1-p11] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022] Open
|
48
|
A new regime for mechanical annealing and strong sample-size strengthening in body centred cubic molybdenum. Nat Commun 2011; 2:547. [DOI: 10.1038/ncomms1557] [Citation(s) in RCA: 71] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/17/2011] [Accepted: 10/19/2011] [Indexed: 11/09/2022] Open
|
49
|
Abstract
ABSTRACTInterfacial reactions induced by ion beam mixing and furnace annealing in Al/Mo bilayers are investigated. The amount of interfacial ion m'xing, 4Dt, follows a linear dose dependence for irradiation temperatures ≤80 C. Below room temperature, the mixing efficiency, defined as d(4Dt)/dø, is temperature independent, and agrees fairly well with the prediction of the phenomenological model based on chemically biased diffusion in thermal spike. We conclude that thermal spike mixing dominates for Xe irradiation of Al/Mo at low temperatures. The mixing efficiency becomes temperature-dependent above room temperature with an apparent activation enthalpy of about 0.17±0.02eV. A layer of 15–20 at.% Mo forms by ion mixing, while oAl12 Mo forms upon thermal annealing in a nonuniform fashion starting at 500°C. Reaction of Mo with large-grained Al substrates shows the same nonuniform characteristics as in evaporated Al/Mo bilayers, implying a minor role of grain boundary effects. Oxygen gettered in the Mo film could be an important factor that influences the interfacial reaction.
Collapse
|
50
|
New structural picture of the Ge2Sb2Te5 phase-change alloy. PHYSICAL REVIEW LETTERS 2011; 106:025501. [PMID: 21405239 DOI: 10.1103/physrevlett.106.025501] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/11/2010] [Indexed: 05/30/2023]
Abstract
Using electron microscopy and diffraction techniques, as well as first-principles calculations, we demonstrate that as much as 35% of the total Ge atoms in the cubic phase of Ge2Sb2Te5 locate in tetrahedral environments. The Ge-vacancy interactions play a crucial stabilizing role, leading to Ge-vacancy pairs and the sharing of vacancies that clusters tetrahedral Ge into domains. The Ge2Sb2Te5 structure with coexisting octahedral and tetrahedral Ge produces optical and structural properties in good agreement with experimental data and explains the property contrast as well as the rapid transformation in this phase-change alloy.
Collapse
|