5-(Chloromethyl)Furfural as a Potential Source for Continuous Hydrogenation of 5-(Hydroxymethyl)Furfural to 2,5-Bis(Hydroxymethyl)Furan

5-(Chloromethyl)furfural (CMF) is cheaper than sugars, because it can be obtained from biomass waste. Herein, the stepwise conversion of CMF to 2,5-bis(hydroxymethyl)furan (BHMF) via 5-(hydroxymethyl)furfural (HMF) was demonstrated for the first time. The purified CMF was hydrolyzed in continuous mode followed by extraction with ethyl acetate (EA), resulting in a HMF yield of 70 mol%. The following factors were assessed during continuous hydrogenation of the produced HMF: the presence of EA in the reaction solvent, HMF concentrations of up to 10 wt% in the feed, the mass production of mesoporous Cu-Al₂ O₃ (meso-CuA-kg), the shaping of meso-CuA-kg into cylindrical pellets, and the setup of the catalytic reactor. Through these efforts, the hydrogenation of HMF over meso-CuA-kg could be sustained for 100 h under the above optimized conditions, affording BHMF in 98 % yield. The approach described in this study can greatly contribute to the value-added transformation of CMF into HMF and BHMF.

5-(Chloromethyl)Furfural as a Potential Source for Continuous Hydrogenation of 5-(Hydroxymethyl)Furfural to 2,5-Bis(Hydroxymethyl)Furan

Invited for this month's cover is the group of Prof. Young-Woong Suh at Hanyang University, Republic of Korea. The cover picture depicts the conceptual design of plastic manufacture starting from 5-(chloromethyl)furfural (CMF) generated from raw biomass (rice straw in the picture). The processing is to hydrolyze the CMF to 5-(hydroxymethyl)furfural (HMF) in aqueous medium, followed by catalytic hydrogenation into 2,5-bis(hydroxymethyl)furan (BHMF). The BHMF can be used as a monomer for plastics including polyurethanes, epoxy resins, and polyesters. More information can be found in the Research Article by Y.-W. Suh and co-workers.

A study on white organic light-emitting diodes co-doped with red fluorescent and blue phosphorescent dopants

White organic light-emitting diodes (WOLEDs) have drawn increasing attention due to their potential use in various applications such as solid-state lighting and backlight of liquid crystal displays and full-color OLEDs of red, green, and blue pixel. N,N'-dicabazolyl-3,5-benzene (mCP), the host material, was co-doped with Iridium (III) bis[(4,6-difluorophenyl)-pyridinato-N,C2']-picolinate (FIrpic), which functions not only as phosphorescent sensitizer but also blue emitter, and (2Z,2'Z)-3,3'-[4,4"-bis (dimethylamino)-1,1':4',1"-terphenyl-2',5'-diyl]bis (2-phenylacrylonitrile) (ABCV-P), which is a red fluorescent material. The fabricated device structures were as follows: (device A) Indium tin oxide (ITO)/N,N'-bis-(1-naphyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine (NPB)/(mCP)/mCP:ABCV-P (1%)/4,7-diphenyl-1,10-phenanthroline (Bphen)/lithium quinolate (Liq)/aluminum (Al), (device B) ITO/NPB/mCP/mCP:FIrpic (8%)/Bphen/Liq/Al and (device C) ITO/NPB/mCP/mCP:FIrpic:ABCV-P (8%, 1%)/Bphen/Liq/Al, respectively. Phosphorescent FIrpic harvesting both singlet and triplet excitions not only emitted blue light but also transferred energy to fluorescent ABCV-P. The maximum luminance efficiency, external quantum efficiency, and luminance of white light device were measured to be 5.95 cd/A, 2.45% and 2500 cd/m2, respectively. The white device gave practically white light with the Commision Internationale de l'Eclairage (CIE(xy)) coordinate of (0.44, 0.49) which was close to warm white color (CIE(xy) = 0.45, 0.45).

A non-doped organic light emitting diode with pure red emission using a new host emitter

A red fluorescent material (2E,2'E)-3,3'-[4,4"-bis(dimethylamino)-1,1': 4',1 "-terphenyl-2',5'-diyl]bis[2-(2-thienyl)acrylonitrile] (ABCV-Th) was synthesized for use in organic light emitting diodes (OLEDs) as the host emissive material. It has been reported some green and blue host emissive materials used in OLEDs revealed high device performance but, owing to concentration quenching, comparable red light emitting materials are still rare in OLEDs application. Non-doped organic light emitting diodes, with the structure of ITO/NPB/ABCV-Th (30 nm and 50 nm)/BCP/Alq3/Liq/Al were fabricated using ABCV-Th as the host emitter. The peak wavelength and full width at half maximum (FWHM) of electroluminescence (EL) were 629.5 nm and 68.5 nm, respectively. The maximum brightness and turn on voltage of the device were measured to be 1330 cd/m2 at 14.6 V and 3.4 V, respectively. The device exhibited authentic red emission (Commission Internationale De L'Eclairage (CIE(xy)) = 0.65, 0.34) which is almost close to the standard red (CIE(xy) = 0.67, 0.33) demanded by the national television system committee (NTSC).