Dynamics of mobile genetic elements of Listeria monocytogenes persisting in ready-to-eat seafood processing plants in France

BACKGROUND

Listeria monocytogenes Clonal Complexes (CCs) have been epidemiologically associated with foods, especially ready-to-eat (RTE) products for which the most likely source of contamination depends on the occurrence of persisting clones in food-processing environments (FPEs). As the ability of L. monocytogenes to adapt to environmental stressors met in the food chain challenges the efforts to its eradication from FPEs, the threat of persistent strains to the food industry and public health authorities continues to rise. In this study, 94 food and FPEs L. monocytogenes isolates, representing persistent subtypes contaminating three French seafood facilities over 2-6 years, were whole-genome sequenced to characterize their genetic diversity and determine the biomarkers associated with long-term survival in FPEs.

RESULTS

Food and FPEs isolates belonged to five CCs, comprising long-term intra- and inter-plant persisting clones. Mobile genetic elements (MGEs) such as plasmids, prophages and transposons were highly conserved within CCs, some of which harboured genes for resistance to chemical compounds and biocides used in the processing plants. Some of these genes were found in a 90.8 kbp plasmid, predicted to be" mobilizable", identical in isolates from CC204 and CC155, and highly similar to an 81.6 kbp plasmid from isolates belonging to CC7. These similarities suggest horizontal transfer between isolates, accompanied by deletion and homologous recombination in isolates from CC7. Prophage profiles characterized persistent clonal strains and several prophage-loci were plant-associated. Notably, a persistent clone from CC101 harboured a novel 31.5 kbp genomic island that we named Listeria genomic island 3 (LGI3), composed by plant-associated loci and chromosomally integrating cadmium-resistance determinants cadA1C.

CONCLUSIONS

Genome-wide analysis indicated that inter- and intra-plant persisting clones harbour conserved MGEs, likely acquired in FPEs and maintained by selective pressures. The presence of closely related plasmids in L. monocytogenes CCs supports the hypothesis of horizontal gene transfer conferring enhanced survival to FPE-associated stressors, especially in hard-to-clean harbourage sites. Investigating the MGEs evolutionary and transmission dynamics provides additional resolution to trace-back potentially persistent clones. The biomarkers herein discovered provide new tools for better designing effective strategies for the removal or reduction of resident L. monocytogenes in FPEs to prevent contamination of RTE seafood.

Viability Detection of Foodborne Bacterial Pathogens in Food Environment by PMA-qPCR and by Microscopic Observation

Foodborne pathogens are responsible of foodborne diseases and food poisoning and thus pose a great threat to food safety. These microorganisms can adhere to surface and form a biofilm composed of an extracellular matrix. This extracellular matrix protects bacterial cells from industrial environmental stress factors such as cleaning and disinfection operations. Moreover, during these environmental stresses, many bacterial species can enter a viable but nonculturable (VBNC) state. VBNC cells are characterized by a loss of cultivability on conventional bacteriological agar. This leads to an underestimation of total viable cells in environmental samples, and thus poses a risk for public health. In this chapter, we present a method to detect viable population of foodborne pathogens in industrial environmental samples using a molecular method with a combination of propidium monoazide (PMA) and quantitative PCR (qPCR) and a fluorescence microscopic method associated with the LIVE/DEAD BacLight™ viability stain.

The absence of N-acetylglucosamine in wall teichoic acids of Listeria monocytogenes modifies biofilm architecture and tolerance to rinsing and cleaning procedures

The wall teichoic acid (WTA) is the major carbohydrate found within the extracellular matrix of the Listeria monocytogenes biofilm. We first addressed the frequency of spontaneous mutations in two genes (lmo2549 and lmo2550) responsible for the GlcNAcylation in 93 serotype 1/2a strains that were mainly isolated from seafood industries. We studied the impact of mutations in lmo2549 or lmo2550 genes on biofilm formation by using one mutant carrying a natural mutation inactivating the lmo2550 gene (DSS 1130 BFA2 strain) and two EGD-e mutants that lack respective genes by in-frame deletion of lmo2549 or lmo2550 using splicing-by-overlap-extension PCR, followed by allelic exchange mutagenesis. The lmo2550 gene mutation, occurring in around 50% isolates, caused a decrease in bacterial adhesion to stainless steel compared to wild-type EGD-e strain during the adhesion step. On the other hand, bacterial population weren't significantly different after 24h-biofilm formation. The biofilm architecture was different between the wild-type strain and the two mutants inactivated for lmo2549 or lmo2550 genes respectively with the presence of bacterial micro-colonies for mutants which were not observed in the wild-type EGD-e strain biofilm. These differences might account for the stronger hydrophilic surface exhibited by the mutant cells. Upon a water flow or to a cleaning procedure at a shear stress of 0.16 Pa, the mutant biofilms showed the higher detachment rate compared to wild-type strain. Meanwhile, an increase in the amount of residual viable but non-culturable population on stainless steel was recorded in two mutants. Our data suggests that the GlcNAc residue of WTA played a role in adhesion and biofilm formation of Listeria monocyctogenes.

Quantification of the extracellular matrix of the Listeria monocytogenes biofilms of different phylogenic lineages with optimization of culture conditions

AIMS

The purpose of this study was to quantify the extracellular matrix of Listeria monocytogenes biofilm. A preliminary study was carried out to establish a relationship between phylogenetic lineage of 27 strains and their ability to form biofilm in various conditions.

METHODS AND RESULTS

Biofilm formation on microtitre plates of 27 strains of L. monocytogenes belonging to lineages I or II was evaluated in different conditions [two temperatures (37 and 22°C) and two media (tryptone soy broth yeast extract medium (TSBYE) and MCDB 202 defined medium)] using crystal violet assay. Lineage II strains produced significantly more biofilm than lineage I strains. In microtitre plates assay, biofilm quantities were greater in MCDB 202 vs TSBYE medium [confirmed by scanning electron microscopy (SEM) analysis] and at 37 vs 22°C. Cultivable bacteria from biofilm population on Petri dishes were enumerated in greater quantities in TSBYE than in MCDB 202 medium. The SEM investigation established that L. monocytogenes biofilms produce extracellular matrix in both media at 37°C. The amount of exopolymers in the extracellular matrix and the pH values were significantly higher in TSBYE than in MCDB 202 medium. The exception was the ScottA strain that presented similar pH values and exopolymer contents in both media. Proteins were the most abundant exopolymer components, followed by DNA and polysaccharides.

CONCLUSIONS

The interpretation of results of biofilm quantification was depending on the growth conditions, the viability of the bacteria and the analysis method. The quantities of proteins, DNA and polysaccharides were different according to the strains and the medium.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study screened the potential of a wide panel of L. monocytogenes strains to synthesize exopolymers in biofilm growing condition. The characterization of L. monocytogenes biofilm composition may help to develop new strategies to prevent the formation of biofilms and to remove the biofilms.

Impact of -2 degrees C superchilling before refrigerated storage (4 and 8 degrees C) on the microbiological and sensory qualities of cold-smoked salmon

Detection and enumeration of Listeria monocytogenes and total spoilage bacteria in 40 batches of cold-smoked salmon (one batch = 42 products from the same day of manufacture) straight from the factory were carried out. If L. monocytogenes was detected in at least one of the nine samples analyzed on receipt at the laboratory, 9 products of the same batch were stored for 10 days at 4 degrees C, which was followed by 18 days at 8 degrees C (control), 12 products were superchilled for 14 days at -2 degrees C, and 12 other products were superchilled for 28 days at -2 degrees C and then stored under the same conditions as the control was stored. L. monocytogenes was detected in 7% of the 40 batches analyzed immediately after receipt at the laboratory. L. monocytogenes prevalence was similar (approximately 25%) throughout the storage at 4 and 8 degrees C, both in control and super-chilled products at -2 degrees C for 14 days. After superchilling for 28 days at -2 degrees C, L. monocytogenes was found in 9% of products, and in 39% at the end of the storage above 0 degree C. Moreover, the L. monocytogenes count was higher after 3 and 4 weeks of storage at 4 and 8 degrees C in products superchilled 28 days at -2 degrees C than in control products or in products superchilled for 14 days. Serotype 1/2a-3a and nine genetic groups were identified and found throughout the storage scenario. At the end of shelf life, sensory characteristics of products superchilled for 28 days at -2 degrees C were slightly modified. A decrease in firmness associated with increased tearing of salmon slices was observed as well as a slight amine odor.

Variable adhesion of Listeria monocytogenes isolates from food-processing facilities and clinical cases to inert surfaces

One hundred one strains of Listeria monocytogenes isolated from seafood and cheese industry samples and from patients with listeriosis were assessed using a microtiter plate method for adhesion to polystyrene and stainless steel surfaces. The adhesion rate for these strains ranged from 3.10 to 35.29% with an inoculum of 8 x 10(8) cells per well. A strong correlation was found between adhesion to polystyrene and stainless steel microtiter plates, indicating that the intrinsic ability of L. monocytogenes to adhere to inert surfaces is stronger than the influence of the surface's physicochemical properties. The clinical strains were less adherent to inert surfaces than were the industrial strains. By integrating other factors such as location of the industrial strains, contamination type of the clinical strains, serotype, and pulsotype into the analysis, some weak but significant differences were noted. For the industrial isolates, the number of cells attached to both surfaces differed significantly depending on whether they were isolated from food or food-processing environments in the seafood and cheese industry. For clinical isolates, sporadic strains exhibited greater adhesion to polystyrene than did epidemic strains. Strains belonging to the pulsed-field gel electrophoretype clusters A and M (lineages II and I, respectively) were less able to adhere to polystyrene and stainless steel than were strains in the more common clusters.

Evaluation of the international reference methods NF EN ISO 11290-1 and 11290-2 and an in-house method for the isolation of Listeria monocytogenes from retail seafood products in france

Retail seafood products were analyzed on their use-by date using the international reference methods NF EN ISO 11290-1 and 11290-2 (collectively method R) or an in-house method (method B) for the isolation of Listeria monocytogenes. The sensitivity of the methods was about 78%. Method R detected more positive samples of smoked salmon and herb-flavored slices of smoked salmon than did method B, whereas the reverse was true for samples of carpaccio-like salmon, herb-flavored slices of raw salmon, and smoked trout. Most products produced a positive result after the first of two enrichments, and little difference was observed after changing the isolation medium (Listeria selective agar, L. monocytogenes blood agar, agar for Listeria according to Ottaviani and Agosti, Oxford agar, and Palcam agar). L. monocytogenes was isolated from 151 (27.8%) of the 543 samples, with concentrations mostly below 100 CFU/g. The pathogen prevalence and concentration in these seafood products varied greatly depending on the producer and the nature of the product. In certain cases, these differences could be explained by problems in cleaning and disinfection operations in the food-processing environment. The identities of L. monocytogenes isolates were confirmed by PCR, and isolates were characterized by random amplification of polymorphic DNA and pulsed-field gel electrophoresis (PFGE). PFGE patterns obtained with the enzymes Apal and AscI produced 26 different pulsotypes. In general, different pulsotypes were present in the different categories of seafood products and were not specific to one producer. The genetic diversity observed in the products was not related to the prevalence found at the manufacturing site. It is therefore important for producers to determine the source(s) of contamination of their product so the risks linked to the presence of L. monocytogenes can be reduced.

Modification of a virulence-associated phenotype after growth of Listeria monocytogenes on food

AIM

To assess the effect of different foods, which have been implicated or not in cases of listeriosis, on the in vitro virulence-associated phenotype level of different Listeria monocytogenes strains.

METHODS AND RESULTS

The virulence-associated phenotype level of L. monocytogenes was studied with the in vitro cell test based on a plaque-forming assay with a human adenocarcinoma cell line (HT-29) monolayer. Three strains of L. monocytogenes were grown in preparations (homogenate, 1-mum filtrate or 0.2-mum filtrate) of different food extracts ['rillettes' (potted minced pork), milk, raw salmon and cold-smoked salmon] or in a control medium, brain heart infusion (BHI). The bacterial suspensions grown in food extracts or in BHI at 37 degrees C were diluted with their growth medium (food extract or BHI) or with minimum essential medium before seeding on confluent HT-29 cell monolayers. Filtration of food extracts had no significant effect on the plaque numbers formed by the bacteria. A significant decrease in the plaque numbers was noted for the three strains when they grew in the rillettes extracts, compared with the other food extracts and BHI. The levels of in vitro virulence-associated phenotype of the strains after growth in the rillettes extract were similar to or lower than that of the hypovirulent internal reference strain L. monocytogenes 442. After growth in milk and cold-smoked salmon, the impact on virulence-associated phenotype depended on the strain. In contrast, plaque-forming assay indicated increased virulence-associated phenotype when the strains were switched from a nutrient-rich medium (food extract or BHI) to a minimum essential medium.

CONCLUSIONS

In vitro virulence-associated phenotype level of the studied strains grown in BHI or cold-smoked salmon was the same as the control virulent strain EGD. In contrast, the nutrients present in rillettes may therefore substantially reduce the number of plaques but not the growth of L. monocytogenes. The utilization of minimum essential medium as diluent attenuates changes the effect of the food extract on virulence-associated phenotype in vitro.

SIGNIFICANCE AND IMPACT OF THE STUDY

In the experimental design of this study, we showed that the nature of the food could affect the in vitro virulence-associated phenotype level of L. monocytogenes.