Alternative nano-lithographic tools for shell-isolated nanoparticle enhanced Raman spectroscopy substrates

Chemically synthesized metal nanoparticles (MNPs) have been widely used as surface-enhanced Raman spectroscopy (SERS) substrates for monitoring catalytic reactions. In some applications, however, the SERS MNPs, besides being plasmonically active, can also be catalytically active and result in Raman signals from undesired side products. The MNPs are typically insulated with a thin (∼3 nm), in principle pin-hole-free shell to prevent this. This approach, which is known as shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), offers many advantages, such as better thermal and chemical stability of the plasmonic nanoparticle. However, having both a high enhancement factor and ensuring that the shell is pin-hole-free is challenging because there is a trade-off between the two when considering the shell thickness. So far in the literature, shell insulation has been successfully applied only to chemically synthesized MNPs. In this work, we alternatively study different combinations of chemical synthesis (bottom-up) and lithographic (top-down) routes to obtain shell-isolated plasmonic nanostructures that offer chemical sensing capabilities. The three approaches we study in this work include (1) chemically synthesized MNPs + chemical shell, (2) lithographic substrate + chemical shell, and (3) lithographic substrate + atomic layer deposition (ALD) shell. We find that ALD allows us to fabricate controllable and reproducible pin-hole-free shells. We showcase the ability to fabricate lithographic SHINER substrates which report an enhancement factor of 7.5 × 103 ± 17% for our gold nanodot substrates coated with a 2.8 nm aluminium oxide shell. Lastly, by introducing a gold etchant solution to our fabricated SHINER substrate, we verified that the shells fabricated with ALD are truly pin-hole-free.

Alanine Formation in a Zero-Gap Flow Cell and the Role of TiO2/Ti Electrocatalysts

The electrochemical synthesis of α-amino acids at room temperature and pressure is a sustainable alternative to conventional methods like microbial fermentation and Strecker synthesis. A custom-built zero-gap flow electrolyzer was used to study the electrosynthesis of alanine via the electrocatalytic reductive amination (ERA) of the corresponding biomassderivable α-keto acid precursor - pyruvic acid (PA), and hydroxylamine (NH2OH) at very low pH. Non-toxic, abundant, and easy to prepare TiO2/Ti electrocatalysts were utilized as the cathode. Three TiO2/Ti felt electrodes with different oxide thicknesses were prepared and their characterization results were correlated with their respective electrochemical performance in terms of Faradaic efficiency η, and partial current density |¯j|. Cyclic voltammetry indicated a different electrocatalytic reduction process on hydrothermally treated electrodes, compared to thermally oxidized ones. Hydrothermally treated electrodes were also found to have the thickest porous anatase TiO2 layer and achieved 50-75% alanine conversion efficiencies. Optimization showed that the cell potential, reactant flow rate and the PA:NH2OH ratio were crucial parameters in determining the conversion efficiency. η and |¯j| were found to significantly decrease when an excess of NH2OH is used and, an optimal alanine η of 75% was achieved at 2.0 V applied cell potential and 10 mL/h reactant flow rate.

Enhanced Performance of an Acoustofluidic Device by Integrating Temperature Control

Acoustofluidics is an emerging research field wherein either mixing or (bio)-particle separation is conducted. High-power acoustic streaming can produce more intense and rapid flow patterns, leading to faster and more efficient liquid mixing. However, without cooling, the temperature of the piezoelectric element that is used to supply acoustic power to the fluid could rise above 50% of the Curie point of the piezomaterial, thereby accelerating its aging degradation. In addition, the supply of excessive heat to a liquid may lead to irreproducible streaming effects and gas bubble formation. To control these phenomena, in this paper, we present a feedback temperature control system integrated into an acoustofluidic setup using bulk acoustic waves (BAWs) to elevate mass transfer and manipulation of particles. The system performance was tested by measuring mixing efficiency and determining the average velocity magnitude of acoustic streaming. The results show that the integrated temperature control system keeps the temperature at the set point even at high acoustic powers and improves the reproducibility of the acoustofluidic setup performance when the applied voltage is as high as 200 V.

3D-Architected Alkaline-Earth Perovskites

3D ceramic architectures are captivating geometrical features with an immense demand in optics. In this work, an additive manufacturing (AM) approach for printing alkaline-earth perovskite 3D microarchitectures is developed. The approach enables custom-made photoresists suited for two-photon lithography, permitting the production of alkaline-earth perovskite (BaZrO3 , CaZrO3 , and SrZrO3 ) 3D structures shaped in the form of octet-truss lattices, gyroids, or inspired architectures like sodalite zeolite, and C60 buckyballs with micrometric and nanometric feature sizes. Alkaline-earth perovskite morphological, structural, and chemical characteristics are studied. The optical properties of such perovskite architectures are investigated using cathodoluminescence and wide-field photoluminescence emission to estimate the lifetime rate and defects in BaZrO3 , CaZrO3 , and SrZrO3 . From a broad perspective, this AM methodology facilitates the production of 3D-structured mixed oxides. These findings are the first steps toward dimensionally refined high-refractive-index ceramics for micro-optics and other terrains like (photo/electro)catalysis.

Structured microgroove columns as a potential solution to obtain perfectly ordered particle beds

We report on a novel concept to produce ordered beds of spherical particles in a suitable format for liquid chromatography. In this concept, spherical particles are either positioned individually (single-layer column) or stacked (multi-layer column) in micromachined pockets that form an interconnected array of micro-grooves acting as a perfectly ordered chromatographic column. As a first step towards realizing this concept, we report on the breakthrough we realized by obtaining a solution to uniformly fill the micro-groove arrays with spherical particles. We show this can be achieved in a few sweeps using a dedicated rubbing approach wherein a particle suspension is manually rubbed over a silicon chip. In addition, numerical calculations of the dispersion in the newly introduced column format have been carried out and demonstrate the combined advantage of order and reduced flow resistance the newly proposed concept has over the conventional packed bed. For fully-porous particles and a zone retention factor of k'' = 2, the h_min decreases from h_min = 1.9 for the best possible packed bed column to around h_min = 1.0 for the microgroove array, while the interstitial velocity-based separation impedance E_i (a direct measure for the required analysis time) decreases from 1450 to 200. The next steps will focus on the removal of occasional particles remaining on the sides of the micro-pockets, the addition of a cover substrate to seal the column and the subsequent conduction of actual chromatographic separations.

White emission in 3D-printed phosphor microstructures

Microscale functional materials permit advanced applications in optics and photonics. This work presents the additive manufacturing of three-dimensional structured phosphors emitting red, green, blue, and white. The development is a step forward to realizing additive colour synthesis within complex architectures of relevance in integrated optics or light-emitting sources.

A compact permanent magnet for microflow NMR relaxometry

We design and demonstrate a compact, robust, and simple to assemble and tune permanent magnet suitable for NMR relaxometry measurements of microfluidic flows. Soft-magnetic stainless-steel plates, incorporated inside the magnet airgap, are key for obtaining substantially improved and tunable field homogeneity. The design is scalable for different NMR probe sizes with the region of suitable field homogeneity, less than 200 ppm, achievable in a capillary length of about 50 % of the total magnet length. The built physical prototype, having 3.5x3.5x8.0 cm³ in size and 5 mm high airgap, provides a field strength of 0.5 T and sufficient field homogeneity for NMR relaxometry measurements in capillaries up to 1.6 mm i.d. and 20 mm long. The magnet was used for test flow rate measurements in a wide range, from 0.001 ml/min to 20 ml/min.

Overcoming voltage losses in vanadium redox flow batteries using WO3 as a positive electrode

Vanadium redox flow batteries (VRFBs) are appealing large-scale energy storage systems due to their unique properties of independent energy/power design. The VRFBs stack design is crucial for technology deployment in power applications. Besides the design, the stack suffers from high voltage losses caused by the electrodes. The introduction of active sites into the electrode to facilitate the reaction kinetic is crucial in boosting the power rate of the VRFBs. Here, an O-rich layer has been applied onto structured graphite felt (GF) by depositing WO₃ to increase the oxygen species content. The oxygen species are the active site during the positive reaction (VO₂ ⁺/VO²⁺) in VRFB. The increased electrocatalytic activity is demonstrated by the monoclinic (m)-WO₃/GF electrode that minimizes the voltage losses, yielding excellent performance results in terms of power density output and limiting current density (556 mWcm^-2@800 mAcm^-2). The results confirm that the m-WO₃/GF electrode is a promising electrode for high-power in VRFBs, overcoming the performance-limiting issues in a positive half-reaction.

Evaluation of Gas Chromatography Columns with Radially Elongated Pillars as Second-Dimension Columns in Comprehensive Two-Dimensional Gas Chromatography

The present study investigated the use of a dedicated gas chromatography (GC) column (L = 70 cm, 75 μm deep, and 6.195 mm wide) with radially elongated pillars (REPs) as the second column in a comprehensive two-dimensional gas chromatography (GC × μGC) system. Three stationary phases [apolar polydimethylsiloxane (PDMS), medium polar room-temperature ionic liquid (RTIL) based on monocationic phosphonium, and polar polyethylene glycol (PEG-1000)] have been coated using the static method at constant pressure or using an original vacuum pressure program (VPP) from 400 to 4 mbar. The best efficiency reached up to N = 62,000 theoretical plates for a film thickness of 47 nm at 100 °C for an iso-octane peak (k = 0.16) at an optimal flow rate of 4.8 mL/min. The use of the VPP improved the efficiency by approximately 15%. Efficiencies up to 28,000 and 47,000 were obtained for PEG-1000 and RTIL, respectively. A temperature-programmed separation of a mixture of 11 volatile compounds on a PDMS-coated chip was obtained in less than 36 s. The PDMS-, PEG-1000-, and RTIL-coated chips were tested as the second column using a microfluidic reverse fill/flush flow modulator in a GC × μGC system. The REP columns were highly compatible with the operating conditions in terms of flow rate and with more than 30,000 plates for the iso-octane peak. Moreover, a commercial solvent called white spirit containing alkanes and aromatic compounds was injected in three sets of columns in normal and reverse modes, demonstrating the great potential of the chip as a second-dimension separation column.

Oil Displacement in Calcite-Coated Microfluidic Chips via Waterflooding at Elevated Temperatures and Long Times

In microfluidic studies of improved oil recovery, mostly pore networks with uniform depth and surface chemistry are used. To better mimic the multiple porosity length scales and surface heterogeneity of carbonate reservoirs, we coated a 2.5D glass microchannel with calcite particles. After aging with formation water and crude oil (CRO), high-salinity Water (HSW) was flooded at varying temperatures and durations. Time-resolved microscopy revealed the CRO displacements. Precise quantification of residual oil presented some challenges due to calcite-induced optical heterogeneity and brine-oil coexistence at (sub)micron length scales. Both issues were addressed using pixel-wise intensity calibration. During waterflooding, most of the ultimately produced oil gets liberated within the first pore volume (similar to glass micromodels). Increasing temperature from 22 °C to 60 °C and 90 °C produced some more oil. Waterflooding initiated directly at 90 °C produced significantly more oil than at 22 °C. Continuing HSW exposure at 90 °C for 8 days does not release additional oil; although, a spectacular growth of aqueous droplets is observed. The effect of calcite particles on CRO retention is weak on flat surfaces, where the coverage is ~20%. The calcite-rich pore edges retain significantly more oil suggesting that, in our micromodel wall roughness is a stronger determinant for oil retention than surface chemistry.

Wafer-Scale Particle Assembly in Connected and Isolated Micromachined Pockets via PDMS Rubbing

The present contribution reports on a study aiming to find the most suitable rubbing method for filling arrays of separated and interconnected micromachined pockets with individual microspheres on rigid, uncoated silicon substrates without breaking the particles or damaging the substrate. The explored dry rubbing methods generally yielded unsatisfactory results, marked by very large percentages of empty pockets and misplaced particles. On the other hand, the combination of wet rubbing with a patterned rubbing tool provided excellent results (typically <1% of empty pockets and <5% of misplaced particles). The wet method also did not leave any damage marks on the silicon substrate or the particles. When the pockets were aligned in linear grooves, markedly the best results were obtained when the ridge pattern of the rubbing tool was moved under a 45° angle with respect to the direction of the grooves. The method was tested for both silica and polystyrene particles. The proposed assembly method can be used in the production of medical devices, antireflective coatings, and microfluidic devices with applications in chemical analysis and/or catalysis.

Self-organization of agitated microspheres on various substrates

The vibration dynamics of relatively large granular grains is extensively treated in the literature, but comparable studies on the self-assembly of smaller agitated beads are lacking. In this work, we investigate how the particle properties and the properties of the underlying substrate surface affect the dynamics and self-organization of horizontally agitated monodisperse microspheres with diameters between 3 and 10 μm. Upon agitation, the agglomerated hydrophilic silica particles locally leave traces of particle monolayers as they move across the flat uncoated and fluorocarbon-coated silicon substrates. However, on the micromachined silicon tray with relatively large surface roughness, the agitated silica agglomerates form segregated bands reminiscent of earlier studies on granular suspensions or Faraday heaps. On the other hand, the less agglomerated hydrophobic polystyrene particles form densely occupied monolayer arrangements regardless of the underlying substrate. We explain the observations by considering the relevant adhesion and friction forces between particles and underlying substrates as well as those among the particles themselves. Interestingly, for both types of microspheres, large areas of the fluorocarbon-coated substrates are covered with densely occupied particle monolayers. By qualitatively examining the morphology of the self-organized particle monolayers using the Voronoi approach, it is understood that these monolayers are highly disordered, i.e., multiple symmetries coexist in the self-organized monolayers. However, more structured symmetries are identified in the monolayers of the agitated polystyrene microspheres on all the substrates, albeit not all precisely positioned on a hexagonal lattice. On the other hand, both the silica and polystyrene monolayers on the bare silicon substrates transition into less disordered structures as time progresses. Using Kelvin probe force microscopy measurements, we show that due to the tribocharging phenomenon, the formation of particle monolayers is promoted on the fluorocarbon surface, i.e., a local electrostatic attraction exists between the particle and the substrate.

Color Tuning of Electrochromic TiO2 Nanofibrous Layers Loaded with Metal and Metal Oxide Nanoparticles for Smart Colored Windows

Co-axial electrospinning was applied for the structuring of non-woven webs of TiO2 nanofibers loaded with Ag, Au, and CuO nanoparticles. The composite layers were tested in an electrochromic half-cell assembly. A clear correlation between the nanoparticle composition and electrochromic effect in the nanofibrous composite is observed: TiO2 loaded with Ag reveals a black-brown color, Au shows a dark-blue color, and CuO shows a dark-green color. For electrochromic applications, the Au/TiO2 layer is the most promising choice, with a color modulation time of 6 s, transmittance modulation of 40%, coloration efficiency of 20 cm2/C, areal capacitance of 300 F/cm2, and cyclic stability of over 1000 cycles in an 18 h period. In this study, an unexplored path for the rational design of TiO2-based electrochromic device is offered with unique color-switching and optical efficiency gained by the fibrous layer. It is also foreseen that co-axial electrospinning can be an alternative nanofabrication technique for smart colored windows.

Spatial Segregation of Microspheres by Rubbing-Induced Triboelectrification on Patterned Surfaces

Particle (monolayer) assembly is essential to various scientific and industrial applications, such as the fabrication of photonic crystals, optical sensors, and surface coatings. Several methods, including rubbing, have been developed for this purpose. Here, we report on the serendipitous observation that microparticles preferentially partition onto the fluorocarbon-coated parts of patterned silicon and borosilicate glass wafers when rubbed with poly(dimethylsiloxane) slabs. To explore the extent of this effect, we varied the geometry of the pattern, the substrate material, the ambient humidity, and the material and size of the particles. Partitioning coefficients amounted up to a factor of 12 on silicon wafers and even ran in the 100s on borosilicate glass wafers at zero humidity. Using Kelvin probe force microscopy, the observations can be explained by triboelectrification, inducing a strong electrostatic attraction between the particles and the fluorocarbon zones, while the interaction with the noncoated zones is insignificant or even weakly repulsive.

Microfluidic Droplet-Storage Array

A microfluidic droplet-storage array that is capable of the continuous operation of droplet formation, storing, repositioning, retrieving, injecting and restoring is demonstrated. The microfluidic chip comprised four valve-assisted droplet generators and a 3 × 16 droplet-storage array. The integrated pneumatically actuated microvalves enable the precise control of aqueous phase dispensing, as well as carrier fluid flow path and direction for flexible manipulating water-in-oil droplets in the chip. The size of droplets formed by the valve-assisted droplet generators was validated under various operating conditions such as pressures for introducing solutions and dispensing time. In addition, flexible droplet addressing in the storage array was demonstrated by storing droplets with various numbers and compositions in different storage units as well as rearranging their stored positions. Moreover, serial injections of new droplets into a retrieved droplet from a storage unit was performed to show the potential of the platform in sequential dosing on incubated droplet-based reactors at the desired timeline. The droplet-storage array with great freedom and flexibility in droplet handling could be applied for performing complex chemical and biologic reactions, especially in which incubation and dosing steps are necessary.

A 3D polydimethylsiloxane microhourglass-shaped channel array made by reflowing photoresist structures for engineering a blood capillary network

This paper describes an innovative yet straightforward fabrication technique to create three-dimensional microstructures with controllable tapered geometries by combining conventional photolithography and thermal reflow of photoresist. Positive photoresist-based microchannel structures with varying width-to-length ratios were reflowed after their fabrication to generate three-dimensional funnel structures with varying curvatures. A polydimethylsiloxane hourglass-shaped microchannel array was next cast on these photoresist structures, and primary human lung microvascular endothelial cells were cultured in the device to engineer an artificial capillary network. Our work demonstrates that this cost-effective and straightforward fabrication technique has great potential in engineering three-dimensional microstructures for biomedical and biotechnological applications such as blood vessel regeneration strategies, drug screening for vascular diseases, microcolumns for bioseparation, and other fluid dynamic studies at microscale.

Systematic Investigation of Insulin Fibrillation on a Chip

A microfluidic protein aggregation device (microPAD) that allows the user to perform a series of protein incubations with various concentrations of two reagents is demonstrated. The microfluidic device consists of 64 incubation chambers to perform individual incubations of the protein at 64 specific conditions. Parallel processes of metering reagents, stepwise concentration gradient generation, and mixing are achieved simultaneously by pneumatic valves. Fibrillation of bovine insulin was selected to test the device. The effect of insulin and sodium chloride (NaCl) concentration on the formation of fibrillar structures was studied by observing the growth rate of partially folded protein, using the fluorescent marker Thioflavin-T. Moreover, dual gradients of different NaCl and hydrochloric acid (HCl) concentrations were formed, to investigate their interactive roles in the formation of insulin fibrils and spherulites. The chip-system provides a bird’s eye view on protein aggregation, including an overview of the factors that affect the process and their interactions. This microfluidic platform is potentially useful for rapid analysis of the fibrillation of proteins associated with many misfolding-based diseases, such as quantitative and qualitative studies on amyloid growth.

High-Resolution SEM and EDX Characterization of Deposits Formed by CH₄+Ar DBD Plasma Processing in a Packed Bed Reactor

The deposits formed during the DBD plasma conversion of CH₄ were characterized by high-resolution scanning electron microscopy (HRSEM) and energy dispersive X-ray elemental analysis (EDX) for both cases of a non-packed reactor and a packed reactor. For the non-packed plasma reactor, a layer of deposits was formed on the dielectric surface. HRSEM images in combination with EDX and CHN elemental analysis of this layer revealed that the deposits are made of a polymer-like layer with a high content of hydrogen (60 at%), possessing an amorphous structure. For the packed reactor, γ-alumina, Pd/γ-alumina, BaTiO₃, silica-SBA-15, MgO/Al₂O₃, and α-alumina were used as the packing materials inside the DBD discharges. Carbon-rich agglomerates were formed on the γ-alumina after exposure to plasma. The EDX mapping furthermore indicated the carbon-rich areas in the structure. In contrast, the formation of agglomerates was not observed for Pd-loaded γ-alumina. This was ascribed to the presence of Pd, which enhances the hydrogenation of deposit precursors, and leads to a significantly lower amount of deposits. It was further found that the structure of all other plasma-processed materials, including MgO/Al₂O₃, silica-SBA-15, BaTiO₃, and α-alumina, undergoes morphological changes. These alterations appeared in the forms of the generation of new pores (voids) in the structure, as well as the moderation of the surface roughness towards a smoother surface after the plasma treatment.

Massively parallel sequencing techniques for forensics: A review

DNA sequencing, starting with Sanger's chain termination method in 1977 and evolving into the next generation sequencing (NGS) techniques of today that employ massively parallel sequencing (MPS), has become essential in application areas such as biotechnology, virology, and medical diagnostics. Reflected by the growing number of articles published over the last 2-3 years, these techniques have also gained attention in the forensic field. This review contains a brief description of first, second, and third generation sequencing techniques, and focuses on the recent developments in human DNA analysis applicable in the forensic field. Relevance to the forensic analysis is that besides generation of standard STR-profiles, DNA repeats can also be sequenced to look for polymorphisms. Furthermore, additional SNPs can be sequenced to acquire information on ancestry, paternity or phenotype. The current MPS systems are also very helpful in cases where only a limited amount of DNA or highly degraded DNA has been secured from a crime scene. If enough autosomal DNA is not present, mitochondrial DNA can be sequenced for maternal lineage analysis. These developments clearly demonstrate that the use of NGS will grow into an indispensable tool for forensic science.

Efficient and Stable Silicon Microwire Photocathodes with a Nickel Silicide Interlayer for Operation in Strongly Alkaline Solutions

Most photoanodes commonly applied in solar fuel research (e.g., of Fe₂O₃, BiVO₄, TiO₂, or WO₃) are only active and stable in alkaline electrolytes. Silicon (Si)-based photocathodes on the other hand are mainly studied under acidic conditions due to their instability in alkaline electrolytes. Here, we show that the in-diffusion of nickel into a 3D Si structure, upon thermal annealing, yields a thin (sub-100 nm), defect-free nickel silicide (NiSi) layer. This has allowed us to design and fabricate a Si microwire photocathode with a NiSi interlayer between the catalyst and the Si microwires. Upon electrodeposition of the catalyst (here, nickel molybdenum) on top of the NiSi layer, an efficient, Si-based photocathode was obtained that is stable in strongly alkaline solutions (1 M KOH). The best-performing, all-earth-abundant microwire array devices exhibited, under AM 1.5G simulated solar illumination, an ideal regenerative cell efficiency of 10.1%.

Three-Dimensional Fractal Geometry for Gas Permeation in Microchannels

The novel concept of a microfluidic chip with an integrated three-dimensional fractal geometry with nanopores, acting as a gas transport membrane, is presented. The method of engineering the 3D fractal structure is based on a combination of anisotropic etching of silicon and corner lithography. The permeation of oxygen and carbon dioxide through the fractal membrane is measured and validated theoretically. The results show high permeation flux due to low resistance to mass transfer because of the hierarchical branched structure of the fractals, and the high number of the apertures. This approach offers an advantage of high surface to volume ratio and pores in the range of nanometers. The obtained results show that the gas permeation through the nanonozzles in the form of fractal geometry is remarkably enhanced in comparison to the commonly-used polydimethylsiloxane (PDMS) dense membrane. The developed chip is envisioned as an interesting alternative for gas-liquid contactors that require harsh conditions, such as microreactors or microdevices, for energy applications.

Electrolysis-Driven and Pressure-Controlled Diffusive Growth of Successive Bubbles on Microstructured Surfaces

Control over the bubble growth rates forming on the electrodes of water-splitting cells or chemical reactors is critical with respect to the attainment of higher energy efficiencies within these devices. This study focuses on the diffusion-driven growth dynamics of a succession of H₂ bubbles generated at a flat silicon electrode substrate. Controlled nucleation is achieved by means of a single nucleation site consisting of a hydrophobic micropit etched within a micrometer-sized pillar. In our experimental configuration of constant-current electrolysis, we identify gas depletion from (i) previous bubbles in the succession, (ii) unwanted bubbles forming on the sidewalls, and (iii) the mere presence of the circular cavity where the electrode is being held. The impact of these effects on bubble growth is discussed with support from numerical simulations. The time evolution of the dimensionless bubble growth coefficient, which is a measure of the overall growth rate of a particular bubble, of electrolysis-generated bubbles is compared to that of CO₂ bubbles growing on a similar surface in the presence of a supersaturated solution of carbonated water. For electrolytic bubbles and under the range of current densities considered here (5-15 A/m²), it is observed that H₂ bubble successions at large gas-evolving substrates first experience a stagnation regime, followed by a fast increase in the growth coefficient before a steady state is reached. This clearly contradicts the common assumption that constant current densities must yield time-invariant growth rates. Conversely, for the case of CO₂ bubbles, the growth coefficient successively decreases for every subsequent bubble as a result of the persistent depletion of dissolved CO₂.

Molecular Monolayers for Electrical Passivation and Functionalization of Silicon-Based Solar Energy Devices

Silicon-based solar fuel devices require passivation for optimal performance yet at the same time need functionalization with (photo)catalysts for efficient solar fuel production. Here, we use molecular monolayers to enable electrical passivation and simultaneous functionalization of silicon-based solar cells. Organic monolayers were coupled to silicon surfaces by hydrosilylation in order to avoid an insulating silicon oxide layer at the surface. Monolayers of 1-tetradecyne were shown to passivate silicon micropillar-based solar cells with radial junctions, by which the efficiency increased from 8.7% to 9.9% for n⁺/p junctions and from 7.8% to 8.8% for p⁺/n junctions. This electrical passivation of the surface, most likely by removal of dangling bonds, is reflected in a higher shunt resistance in the J-V measurements. Monolayers of 1,8-nonadiyne were still reactive for click chemistry with a model catalyst, thus enabling simultaneous passivation and future catalyst coupling.

A microfluidic device for the batch adsorption of a protein on adsorbent particles

A microfluidic platform or “microfluidic batch adsorption device” is presented, which performs two sets of 9 parallel protein incubations with/without adsorbent particles to achieve an adsorption isotherm of a protein in a single experiment.

Spatioselective Electrochemical and Photoelectrochemical Functionalization of Silicon Microwires with Axial p/n Junctions

The spatioselective functionalization of silicon microwires with axial p/n junctions is achieved using the electronic properties of the junction. (Photo)electrochemical deposition of metals is demonstrated at the bottom and top of the wires in the dark and light, respectively. The junction depletion layer remains unmodified, which allows its visualization and comparison with theoretical calculations.

Programmable v-type valve for cell and particle manipulation in microfluidic devices

A new microfluidic valve or a "v-type valve" which can be flexibly actuated to focus a fluid flow and block a specific area of a microchannel is demonstrated. Valves with different design parameters were fabricated by multilayer soft lithography and characterized at various operating pressures. To evaluate the functionality of the valve, single microparticles (∅ 7 μm and ∅ 15 μm) and single cells were trapped from flowing suspensions. Continuous processes of particle capture and release were achieved by controlling the actuation and deactuation of the valve. Integration of the v-type valve with poly(dimethyl siloxane) (PDMS) monolithic valves in microfluidic devices was demonstrated to illustrate the potential of the system in various applications such as the creation of a solid phase column, the isolation of a specific number of particles in reactors, and the capture and release of particles or cells in the flow of two immiscible liquids. We believe that this new valve system will be suitable for manipulating particles and cells in a broad range of applications.

Microfluidic device for DNA amplification of single cancer cells isolated from whole blood by self-seeding microwells

Self-seeding microwell chips can sort single cells into 6400 wells based on cell size and their identity verified by immunofluorescence staining. Here, we developed a microfluidic device in which these single cells can be placed, lysed and their DNA amplified for further interrogation. Whole blood spiked with MCF7 tumor cells was passed through the microwell chips after leukocyte depletion and 37% of the MCF7 cells were identified by epithelial cell adhesion molecule (EpCAM) staining in the microwells. Identified single cells were punched into the reaction chamber of the microfluidic device and reagents for cell lysis and DNA amplification introduced sequentially by peristaltic pumping of micro-valves. On-chip lysis and amplification was performed in 8 parallel chambers yielding a 10,000 fold amplification of DNA. Accessibility of the sample through the reaction chamber allowed for easy retrieval and interrogation of target-specific genes to characterize the tumor cells.

Fabrication and Doping Methods for Silicon Nano- and Micropillar Arrays for Solar-Cell Applications: A Review

Silicon is one of the main components of commercial solar cells and is used in many other solar-light-harvesting devices. The overall efficiency of these devices can be increased by the use of structured surfaces that contain nanometer- to micrometer-sized pillars with radial p/n junctions. High densities of such structures greatly enhance the light-absorbing properties of the device, whereas the 3D p/n junction geometry shortens the diffusion length of minority carriers and diminishes recombination. Due to the vast silicon nano- and microfabrication toolbox that exists nowadays, many versatile methods for the preparation of such highly structured samples are available. Furthermore, the formation of p/n junctions on structured surfaces is possible by a variety of doping techniques, in large part transferred from microelectronic circuit technology. The right choice of doping method, to achieve good control of junction depth and doping level, can contribute to an improvement of the overall efficiency that can be obtained in devices for energy applications. A review of the state-of-the-art of the fabrication and doping of silicon micro and nanopillars is presented here, as well as of the analysis of the properties and geometry of thus-formed 3D-structured p/n junctions.

Abstract 367: Microfluidic devices for the interrogation of single circulating tumor cells

Introduction: Genetic and phenotypic characterization of Circulating Tumor Cells (CTC) offer the opportunity for a “real time liquid biopsy”. However, heterogeneity and rarity of CTC command the need for individual cell characterization. Following an enrichment procedure of CTC from blood, the identification, isolation and manipulation of single CTC for further analysis without cell loss remains challenging. Here, we present microfluidic devices for parallel single cell whole genome amplification (psc WGA) and parallel probing of drug response of single cancer cells (psc probing).

Method: Microfluidic devices were designed using AUTOCAD software, and fabricated using PDMS multilayer soft-lithography. Cells from the SKBR-3 and MCF-7 breast cancer cell lines were used in the devices and identified using fluorescence microscopy after immunofluorescence staining. For pscWGA, the GE Single Cell GenomiPhi DNA Amplification kit was used under isothermal conditions.

Results: In the 1st scWGA device, single cancer cells were addressed in 16 individual reaction chambers, subsequently lyzed, and their DNA amplified on a chip. We successfully amplified DNA of single cancer cells in a ca. 23 nanoliter reaction volume. 1,000-fold amplified DNAs were validated using qPCR targeting a set of genes on different chromosomes. For WGA of CTC present in a large number of other cells, we developed a 2nd scWGA platform by combining a self-sorting microwell cell sorter and a microfluidic device. After filtration of a cell suspension using a microwell plate, cancer cells were identified using fluorescence microscopy at the bottom of the plate. Cells of interest were subsequently punched into the open-well structures of the microfluidic device for further analysis. The lysis and WGA reaction buffers were loaded using peristaltic pumping of integrated micro-valves. After cell lysis, DNA was amplified in the open-well reaction chamber. For validation ∼ 100 ng of DNA was pipetted out of the well. We also developed microfluidic devices to study drug-dose response of single cancer cells. This device is capable of capturing single cells, dosing various concentrations of drugs and exposing the cells to the drugs. We optimized the capturing efficiency using different sizes of beads (3 μm, 6 μm, and 15 μm) as well as MCF-7 cells. We demonstrated that single cancer cells could be exposed to different drug candidates in the reagent chambers and their response measured.

Conclusion: We successfully developed various microfluidic devices for individual cell characterization to be applied for CTC analysis. For genetic make-up, whole genome amplification of single cells either in suspension or in a self-sorting microwell plate was demonstrated. On-chip cell lysis and DNA amplification were performed and validated by qPCR targeting specific genes. In addition microfluidic devices were designed and tested to investigate single cell response to cancer drugs.

Citation Format: Yoonsun Yang, Hoon Suk Rho, Joost F. Swennenhuis, Michiel Stevens, Arjan GJ Tibbe, Séverine Le Gac, Han Gardeniers, Leon WMM Terstappen. Microfluidic devices for the interrogation of single circulating tumor cells. [abstract]. In: Proceedings of the 106th Annual Meeting of the American Association for Cancer Research; 2015 Apr 18-22; Philadelphia, PA. Philadelphia (PA): AACR; Cancer Res 2015;75(15 Suppl):Abstract nr 367. doi:10.1158/1538-7445.AM2015-367

Production and characterization of miro- and nano-features in biomedical alumina and zirconia ceramics using a tape casting route

A process of micromolding, delivering micro- and nanopatterned ceramic surfaces for biomaterial applications is described in this work. To create the desired structures, tape casting of ceramic slurries on microfabricated silicon mold was used. Several tape casting slurry compositions were tested to evaluate the feasibility of transferring micro- and nano-features from silicon molds. Used ceramics were alumina (α-Al(2)O(3)) and yttria stabilized zirconia. Three types of polymeric binders for the green tape (PVB, PES, and PVP) were investigated using three different solvents (ethanol, n-methyl-pyrrolidone, water). Well-defined features in shapes of wells with diameters down to 2.4 μm and a depth of 10 μm and pillars with diameters down to 1.7 μm and a height of 3 μm were obtained. Morphology, grain size and porosity of the sintered bodies were characterized. Finally fibroblast cells were cultured on the surfaces in order to observe their morphology under influence of the microstructured surfaces.