Time elapsed from definitive diagnosis to surgery for osteonecrosis of the femoral head: a nationwide observational study in Japan

OBJECTIVES

This study documents the time elapsed from the diagnosis of osteonecrosis of the femoral head (ONFH) to surgery, exploring the factors that influence ONFH severity.

DESIGN

Retrospective observational study of a nationwide database.

SETTING

The Kaplan-Meier method with log-rank tests was applied to examine the period from definitive diagnosis of ONFH to surgery using any surgery as the end point. For bilateral cases, the date of the first surgery was the endpoint.

PARTICIPANTS

This study included 2074 ONFH cases registered in 34 university hospitals and highly specialised hospitals of the multicentre sentinel monitoring system of the Japanese Investigation Committee between 1997 and 2018.

MAIN OUTCOME MEASURE

The primary outcome was the time from diagnosis to surgery. The secondary outcome was the proportion of subjects remaining without surgery at 3, 6 and 9 months, and at 1, 2 and 5 years after diagnosis.

RESULTS

The median time to surgery was 9 months (IQR 4-22 months) after diagnosis of ONFH. The time to surgery was significantly shorter in the alcohol alone group and the combined corticosteroid and alcohol group than in the corticosteroid alone group (p=0.018 and p<0.001, respectively), in early stage ONFH with no or mild joint destruction (stages II and III, p<0.001), and with joint preserving surgery (p<0.001). The proportion without surgery was 75.8% at 3 months, 59.6% at 6 months, 48.2% at 9 months, 40.5% at 1 year, 22.2% at 2 years and 8.3% at 5 years.

CONCLUSION

ONFH has been considered to be an intractable disease that often requires surgical treatment, but the fact that surgery was performed in more than half of the patients within 9 months from diagnosis suggests severe disease with a significant clinical impact.

TRIAL REGISTRATION NUMBER

Chiba University ID1049.

Does difference in stem design affect accuracy of stem alignment in total hip arthroplasty with a CT-based navigation system?

The efficacy of a computed tomography (CT)-based navigation system to accurately position the stem for intended alignment is unclear. In addition, the influence of stem design on the accuracy of insertion is unknown. We therefore retrospectively compared the accuracy and precision for the intended alignment of two different designs of femoral stem which were implanted with or without the navigation system. Forty-nine total hip arthroplasties (THAs) using a tapered wedge stem and 91 THAs using an anatomic stem were evaluated for the navigation group. Thirty-three THAs using the tapered wedge stem and 15 THAs using the anatomic stem were controls for the non-navigation group. Differences between postoperative measurement and preoperative planning were compared among the groups. In the navigation groups, accuracy (mean absolute difference) and precision (95% limits of agreement) of stem anteversion were 4.3° and ± 10.1° in the tapered wedge stem and 3.1° and ± 6.9° in the anatomic stem. In the non-navigation groups, these were 6.0° and ± 15.2° and 4.8° and ± 12.4°, respectively. The accuracy and precision in the navigation groups were significantly superior to those in the non-navigation group, and those in the anatomic stem group were significantly superior to those in the tapered wedge group. Using the CT-based navigation system, the accuracy and precision for intended stem anteversion were improved. When compared under guidance of navigation system, the accuracy and precision for intended stem anteversion in the anatomic stem were superior to those in the tapered wedge stem.

Control of protein function through oxidation and reduction of persulfidated states

Irreversible oxidation of Cys residues to sulfinic/sulfonic forms typically impairs protein function. We found that persulfidation (CysSSH) protects Cys from irreversible oxidative loss of function by the formation of CysSSO_1-3H derivatives that can subsequently be reduced back to native thiols. Reductive reactivation of oxidized persulfides by the thioredoxin system was demonstrated in albumin, Prx2, and PTP1B. In cells, this mechanism protects and regulates key proteins of signaling pathways, including Prx2, PTEN, PTP1B, HSP90, and KEAP1. Using quantitative mass spectrometry, we show that (i) CysSSH and CysSSO₃H species are abundant in mouse liver and enzymatically regulated by the glutathione and thioredoxin systems and (ii) deletion of the thioredoxin-related protein TRP14 in mice altered CysSSH levels on a subset of proteins, predicting a role for TRP14 in persulfide signaling. Furthermore, selenium supplementation, polysulfide treatment, or knockdown of TRP14 mediated cellular responses to EGF, suggesting a role for TrxR1/TRP14-regulated oxidative persulfidation in growth factor responsiveness.

Treatment with Bifemelane for Optic Nerve Damage following High Intraocular Pressure in Rat Eyes

This study found that pretreatment with 4-(o-benzylphenoxy)-N- methylbuty-lamine hydrochloride (bifemelane hydrochloride, Celeport) reduced ischemia-reperfusion injury in rat eyes. Bifemelane (25 mg/kg) was injected intraperitoneally 30 minutes before an ischemic insult, then acute ischemia of the retina and optic disc was induced by increasing intraocular pressure to 110 mmHg for 45 minutes. After one week, the axonal count of the optic nerve was investigated using electron microscopy. The control group consisted of vehicle-treated eyes which received normal saline. The axon count was 93.4 +/- 7.9 for the bifemelane treated group, and 79.2 +/- 6.4 for the controls. The axon count in the treated group was significantly higher. These results suggest that bifemelane, which prevents cerebral nerve cell damage from ischemia, can reduce ischemic retinal nerve cell injury.

Effect of improved navigation performance on the accuracy of implant placement in total hip arthroplasty with a CT-based navigation system

A computed tomography (CT)-based navigation system is one of the support tools to place implant with appropriate alignment and position in total hip arthroplasty (THA). To determine whether the higher performance of the navigation would further improve the accuracy of implant placement in the clinical setting, we retrospectively compared the navigation accuracy of two different versions of a navigation system. The newer version of the navigation system had an upgraded optical sensor with superior positional accuracy. Navigation accuracy, defined as differences between postoperative measurements on CT images and intraoperative records on the navigation system, of 49 THAs performed with the newer version of the navigation system was compared with that of 49 THAs performed with the older version. With the newer version, the mean absolute accuracy (95% limits of agreement) of implant alignment was 1.2° (± 3.3°) for cup inclination, 1.0° (± 2.4°) for cup anteversion, 2.0° (± 4.9°) for stem anteversion, and 1.1° (± 2.4°) for stem valgus angle. The accuracy of the implant position was 1.5 mm (± 3.1 mm), 1.3 mm (± 3.0 mm), and 1.5 mm (± 3.1 mm) for cup x-, y-, and z-axes, respectively, 1.6 mm (± 3.2 mm), 1.4 mm (± 2.9 mm), and 1.5 mm (± 2.7 mm) for stem x-, y-, and z-axes, respectively, and 2.4 mm (± 4.5 mm) for leg length discrepancy. The values for the newer version were significantly more accurate with less variation compared to those of the older version. With upgraded navigation performance, more accurate implant placement was demonstrated in the clinical setting.

Effects of coordinate-system construction methods on postoperative computed tomography evaluation of implant orientation after total hip arthroplasty

OBJECTIVE

In total hip arthroplasty, it is important to assess postoperative implant orientation. The computed tomography-based (CT-based) three-dimensional (3D) templating method using 3D preoperative planning software is generally recommended. In this method, postoperative implant orientation within a bony coordinate system can be measured by overlaying a 3D computerized model of the implant on a real postoperative CT image of the implant. The bony coordinate system consists of several reference points (RPs) marked on a CT image of the bone surface. Therefore, preoperative and postoperative coordinate systems do not always match. We investigated how the difference between coordinate systems constructed from RPs chosen by manual methods (M1 and M2) and those constructed by the computer matching method influences the results of measurement validation.

METHODS

In M1, postoperative RPs were chosen without a specific tool in a single planning module. In M2, postoperative RPs were chosen with as little deviation as possible from preoperative RPs, verifying preoperative RPs on another monitor.

RESULTS

M1 and M2 produced mean errors in acetabular cup inclination of 0.7° ± 0.5° and 0.5° ± 0.3°, respectively, and mean errors in cup anteversion of 1.3° ± 1.2° and 0.5° ± 0.4°, respectively, which were statistically significant differences. M1 and M2 produced mean errors in femoral stem anteversion of 2.4° ± 2.0° and 2.7° ± 2.1°, respectively, not a significant difference, but these errors were larger than errors in cup orientation.

DISCUSSION

We recommend referring to preoperative RPs when choosing postoperative RPs. Surgeons must be aware that for evaluation of postoperative stem anteversion, manual methods may produce considerable error.

Hip range of motion during daily activities in patients with posterior pelvic tilt from supine to standing position

In most patients with hip disorders, the anterior pelvic plane (APP) sagittal tilt does not change from supine to standing position. However, in some patients, APP sagittal tilt changes more than 10° posteriorly from supine to standing position. The purpose of this study was to both examine APP sagittal tilt and investigate the hip flexion and extension range of motion (ROM) required during daily activities in these atypical patients. Patient-specific 4-dimensional (4D) motion analysis was performed for 50 hips from 44 patients who had undergone total hip arthroplasty. All patients divided into two categories, such as atypical patients for whom the pelvis tilted more than 10° posteriorly from supine to standing position preoperatively (19 hips from 18 patients) and the remaining typical patients (31 hips from 26 patients). The required hip flexion and extension angles did not differ significantly between atypical patients and typical patients. In conclusion, the hip flexion ROM during deep bending activities and hip extension ROM during extension activities required in those atypical patients with pelvic tilt more than 10° backward from supine to standing position did not shift in the direction of extension.

Predictors of the response to treatment in acute lupus hemophagocytic syndrome

OBJECTIVE

The objective of this paper is to identify predictors for the response to treatment of acute lupus hemophagocytic syndrome (ALHS).

METHODS

We reviewed seven cases with ALHS admitted to our hospital and published ALHS cases identified in the 2001-2014 Medline database, and then conducted univariate and multivariate analyses to identify predictors for the response to treatment.

RESULTS

Review of our cases showed a significant and negative correlation between serum ferritin and anti-DNA antibody (p = 0.0025). All three patients treated with cyclosporine A (CsA) were considered responders despite high serum ferritin and corticosteroid resistance. We also reviewed 93 patients with ALHS identified in 46 articles. Multiple logistic regression analysis identified C-reactive protein (CRP) (OR 0.83, p = 0.042) and hemoglobin (OR 1.53, p = 0.026) measured at diagnosis of ALHS as significant predictors of the response to corticosteroid monotherapy. Moreover, among 32 patients treated with CsA, serum ferritin was significantly higher in CsA responders (12163 ± 16864 µg/l, n = 22) than in non-responders (3456 ± 6267/µg/l, p = 0.020, n = 10). Leukocyte count was significantly lower in the CsA responders (1940.0 ± 972.3/µl) than in the non-responders (3253 ± 2198/µl, p = 0.034).

CONCLUSION

Low CRP and high hemoglobin can predict a positive response to corticosteroid monotherapy while high serum ferritin and low leukocyte count can predict a positive response to CsA in patients with ALHS and therefore, when corticosteroid monotherapy is not effective in such cases, CsA could be the first choice of an additional immunosuppressive agent.

Three-dimensional morphology and bony range of movement in hip joints in patients with hip dysplasia

To confirm whether developmental dysplasia of the hip has a risk of hip impingement, we analysed maximum ranges of movement to the point of bony impingement, and impingement location using three-dimensional (3D) surface models of the pelvis and femur in combination with 3D morphology of the hip joint using computer-assisted methods. Results of computed tomography were examined for 52 hip joints with DDH and 73 normal healthy hip joints. DDH shows larger maximum extension (p = 0.001) and internal rotation at 90° flexion (p < 0.001). Similar maximum flexion (p = 0.835) and external rotation (p = 0.713) were observed between groups, while high rates of extra-articular impingement were noticed in these directions in DDH (p < 0.001). Smaller cranial acetabular anteversion (p = 0.048), centre-edge angles (p < 0.001), a circumferentially shallower acetabulum, larger femoral neck anteversion (p < 0.001), and larger alpha angle were identified in DDH. Risk of anterior impingement in retroverted DDH hips is similar to that in retroverted normal hips in excessive adduction but minimal in less adduction. These findings might be borne in mind when considering the possibility of extra-articular posterior impingement in DDH being a source of pain, particularly for patients with a highly anteverted femoral neck.

Risk of edge-loading and prosthesis impingement due to posterior pelvic tilting after total hip arthroplasty

BACKGROUND

Proper implant orientation is essential for avoiding edge-loading and prosthesis impingement in total hip arthroplasty. Although cup orientation is affected by a change in pelvic tilt after surgery, it has been unclear whether surgeons can prevent impingement and edge-loading by proper positioning by taking into account any change in pelvic alignment associated with alteration of hip range of motion.

METHODS

We simulated implant orientation without edge-loading and prosthesis impingement, even with a change in pelvic tilt and associated change in hip range of motion after surgery, by collision detection using implant models created with computer-aided design.

FINDINGS

If posterior pelvic tilting with a corresponding hyperextension change in hip range of motion after surgery remains within 10°, as occurs in 90% of cases, surgeons can avoid edge-loading and impingement by correctly orienting the implant, even when using a conventional prosthesis. However, if a 20° change occurs after surgery, it may be difficult to avoid those risks.

INTERPRETATION

Although edge-loading and impingement can be prevented by performing appropriate surgery in most cases, even when taking into account postoperative changes in pelvic tilt, it may also be important to pay attention to spinal conditions to ensure that pelvic tilting is not extreme because of increasing kyphosis.

Pim-2 kinase is an important target of treatment for tumor progression and bone loss in myeloma

Pim-2 kinase is overexpressed in multiple myeloma (MM) cells to enhance their growth and survival, and regarded as a novel therapeutic target in MM. However, the impact of Pim-2 inhibition on bone disease in MM remains unknown. We demonstrated here that Pim-2 expression was also upregulated in bone marrow stromal cells and MC3T3-E1 preosteoblastic cells in the presence of cytokines known as the inhibitors of osteoblastogenesis in MM, including interleukin-3 (IL-3), IL-7, tumor necrosis factor-α, transforming growth factor-β (TGF-β) and activin A, as well as MM cell conditioned media. The enforced expression of Pim-2 abrogated in vitro osteoblastogenesis by BMP-2, which suggested Pim-2 as a negative regulator for osteoblastogenesis. Treatment with Pim-2 short-interference RNA as well as the Pim inhibitor SMI-16a successfully restored osteoblastogenesis suppressed by all the above inhibitory factors and MM cells. The SMI-16a treatment potentiated BMP-2-mediated anabolic signaling while suppressing TGF-β signaling. Furthermore, treatment with the newly synthesized thiazolidine-2,4-dione congener, 12a-OH, as well as its prototypic SMI-16a effectively prevented bone destruction while suppressing MM tumor growth in MM animal models. Thus, Pim-2 may have a pivotal role in tumor progression and bone loss in MM, and Pim-2 inhibition may become an important therapeutic strategy to target the MM cell-bone marrow interaction.

Factors predicting change in pelvic posterior tilt after THA

In total hip arthroplasty, steep cup inclination should be avoided because it increases the risk of edge loading. Pelvic posterior tilt should be carefully monitored because it increases cup inclination and anteversion, leading to edge loading or impingement. The authors evaluated how much the pelvic tilt angle changes from the supine position referenced in planning for cup orientation preoperatively to the standing position 1 year after total hip arthroplasty (Δref). The pelvic tilt angle was measured in 124 patients who underwent total hip arthroplasty due to osteoarthritis, and the mean Δref was -9.5°±5.3° (range, -23° to 5°). Preoperative compression fractures, spondylolisthesis, and disk-space narrowing were predictive of increased pelvic posterior tilt after total hip arthroplasty. The authors mathematically calculated how much change in pelvic posterior tilt was clinically possible with the original cup alignment, which ranged from 40° to 45° of radiographic inclination and 0° to 30° radiographic anteversion to more than 50° of inclination. Even if the maximum posterior tilt (23°) occurred, no edge loading would occur in almost half of those original cups. Surgeons should aim for 40° of inclination. When the original cup inclination was 40°, edge loading was prevented. Edge loading caused by steep cup inclination can be prevented by adjusting the cup orientation to account for predicted pelvic tilting, but spinal alignment must also be considered because lumbar kyphosis can increase postoperative pelvic posterior tilt.

Detecting cause of dislocation after total hip arthroplasty by patient-specific four-dimensional motion analysis

BACKGROUND

Dislocation is a major complication after total hip arthroplasty. Prosthesis impingement is considered to be an important cause of dislocation because impingement marks are more frequently found on retrieved cups or liners in patients who have undergone revision surgery because of dislocation (80%-94%) than in those who have undergone reoperation for other reasons (51%-56%). However, it remains a question whether impingement marks are the cause of dislocation or are instead its result. To clarify the issue, it is necessary to confirm noninvasively whether the point of impingement matches the patient's hip position when dislocation occurs.

METHODS

Using four-dimensional patient-specific analysis, we recorded prosthesis impingement in 10 hips with instability after primary total hip arthroplasty when the patients reproduced the dislocation-causing motion.

FINDINGS

We found prosthesis impingement to be related to at least instability in 6 of 10 hips with dislocation after primary total hip arthroplasty and in 4 of 4 hips that underwent revision surgery for recurrent dislocation. All impingements occurred between the anterior wall of the liner and the stem neck in posterior dislocation and between the posterior wall of the liner and the stem neck in anterior dislocation. Revision surgery in 1 of those 4 hips revealed 2 impingement marks on the retrieved liner that closely matched the prosthesis impingement point and the dislocation pathway of the metal head on the liner that were detected earlier during motion analysis.

INTERPRETATION

Prosthesis impingement is an important factor in dislocation after total hip arthroplasty.

Anatomical hip range of motion after implantation during total hip arthroplasty with a large change in pelvic inclination

The supine functional pelvic plane is the recommended reference pelvic plane for acetabular cup planning in navigation-assisted total hip arthroplasty. However, it is unclear whether it can be used in patients with a large preoperative positional change in pelvic inclination (PC) from the supine to the standing position because it is unknown whether these patients have a different hip range of motion (ROM). We measured the anatomical hip ROM after implantation by computed tomography-based navigation in 91 patients and found it to be similar between those with a small PC (<10°) and those with a large PC (≥10°). There was no significant correlation between ROM and preoperative PC. The supine functional pelvic plane is adequate for cup planning whether the PC is small or large.

Dynamic measurements of hip movement in deep bending activities after total hip arthroplasty using a 4-dimensional motion analysis system

Although deep hip bending activities are often required in Asian populations because of traditional lifestyles and religious practices, few have examined the required hip range of motion (ROM) in these activities after total hip arthroplasty (THA). We performed postoperative motion analysis to evaluate the differences in required ROMs between Japanese-style and Western-style deep hip bending activities, to investigate whether prosthetic impingement would occur during these activities and to clarify the necessity for precautions in these activities after THA. Japanese-style activities did not require larger hip ROMs than Western-style ones, and all required hip flexion angles were less than 120°. Prosthetic impingement was not observed, with a safety margin 10° or higher until impingement in any directions of flexion, adduction, or internal rotation for any activities. Thus, particular postoperative precautions for Japanese-style activities are not required.

Eleven- to 14-year follow-up results of cementless total hip arthroplasty using a third-generation alumina ceramic-on-ceramic bearing

To analyze long-term survivorship of cementless total hip arthroplasties (THAs) with the third-generation alumina ceramic-on-ceramic bearing, 100 consecutive THAs between 1996 and 1998 were reviewed. One cup and 2 stems were revised due to aseptic loosening. Another cup showed chipping of the acetabular liner at 8 years and required cup revision. The remaining hips showed stable bone ingrowth fixation with no osteolysis at the final follow-up. The 14-year survivorship as the end point of revision was 97.9% for the cup, 97.8% for the stem, and 95.7% for the overall implants, respectively. We conclude that cementless THA with the third-generation ceramic-on-ceramic hip bearing provided an excellent survivorship and eliminated periprosthetic osteolysis for 11 to 14 years.

Modular neck for prevention of prosthetic impingement in cases with excessively anteverted femur

BACKGROUND

It is important to adjust stem anteversion in cases of excessive femoral version to avoid prosthetic impingement-related complications in total hip arthroplasty. Although modular necks are considered an effective solution, their application in cases with wide variations in femoral anteversion remains to be elucidated. This study aimed to simulate the effects of different modular necks on prevention of prosthetic impingement due to excessive femoral anteversion.

METHODS

We investigated range of motion without prosthetic impingement by collision detection using implant computer-aided design models of the ANCA-Fit system.

FINDINGS

Modular necks could provide an adequate range of motion in cases with up to 60° of femoral anteversion. However, few alternative necks were available in cases with excessive femoral anteversion, while many options could be used for femoral offset and version control in cases with average amounts of femoral anteversion without prosthetic impingement.

INTERPRETATION

We conclude that modular necks might provide a marginal advantage over other options such as cemented, conical or modular stems for cases with an excessively anteverted femur, although they could help to maintain the femoral offset in some cases with average femoral anteversion.

[Successful completion of left total hip arthroplasty by inhibitor neutralization therapy in a hemophilia B patient with high responding inhibitor]

Major surgery in hemophilia patients has been facilitated by the development of coagulation concentrates. However, it is still difficult to manage bleeding during major surgery in patients with inhibitors to FVIII/IX. In addition, there have been few reports of major surgery in hemophilia B with high responding inhibitors. We report a 26-year-old hemophilia B patient with high responding factor IX inhibitor who demonstrated severe hemophiliac arthropathy in his left hip joint. Total hip arthroplasty was performed with a high dose of FIX followed by recombinant FVIIa. His inhibitor titer was decreased from 111 BU/ml to 1.0 BU/ml at surgery by avoiding the use of FIX concentrates. Thus, we could use high dose FIX for the management of surgical bleeding. Anamnestic response occurred on the 7th day after surgery and FIX concentrates were switched to recombinant FVIIa. The whole process was safely managed without any excess bleeding or adverse effects. The successful use of high dose FIX followed by recombinant FVIIa suggests that even major surgery could be safely performed in hemophilia B patients with a low titer of high responding inhibitors.

Oligomeric peroxiredoxin-I is an essential intermediate for p53 to activate MST1 kinase and apoptosis

Mammalian Ste20-like kinase-1 (MST1) kinase mediates H₂O₂-induced cell death by anticancer drugs such as cisplatin in a p53-dependent manner. However, the mechanism underlying MST1 activation by H₂O₂ remains unknown. Here we show that peroxiredoxin-I (PRX-I) is an essential intermediate in H₂O₂-induced MST1 activation and cisplatin-induced cell death through p53. Cell stimulation with H₂O₂ resulted in PRX-I oxidation to form homo-oligomers and interaction with MST1, leading to MST1 autophosphorylation and augmentation of kinase activity. In addition, RNA interference knockdown experiments indicated that endogenous PRX-I is required for H₂O₂-induced MST1 activation. Live-cell imaging showed H₂O₂ generation by cisplatin treatment, which likewise caused PRX-I oligomer formation, MST1 activation and cell death. Cisplatin-induced PRX-I oligomer formation was not observed in embryonic fibroblasts obtained from p53-knockout mice, confirming the importance of p53. Indeed, ectopic expression of p53 induced PRX-I oligomer formation and cell death, both of which were cancelled by the antioxidant NAC. Moreover, we succeeded in reconstituting H₂O₂-induced MST1 activation in vitro, using purified PRX-I and MST1 proteins. Collectively, our results show a novel PRX-I function to cause cell death in response to high levels of oxidative stress by activating MST1, which underlies the p53-dependent cytotoxicity caused by anticancer agents.

Cementless modular total hip arthroplasty with subtrochanteric shortening osteotomy for hips with developmental dysplasia

BACKGROUND

The purpose of this retrospective study was to analyze the functional and radiographic results of cementless, modular total hip arthroplasty combined with subtrochanteric osteotomy for the treatment of patients who had had Crowe Group-IV developmental dysplasia of the hip as a child.

METHODS

Twenty-five consecutive patients (thirty-three hips) who had previously had Crowe Group-IV developmental dysplasia of the hip were treated with a modular cementless prosthesis at a mean age of sixty years. The mean follow-up period was eight years (range, five to eleven years). The acetabular cup was placed in the position of the anatomical hip center in every patient. Subtrochanteric femoral shortening osteotomy was performed with use of a step-cut design.

RESULTS

The mean Merle d'Aubigné and Postel hip score improved from 9 to 16 points (out of a maximum of 18 points). The mean limb-length discrepancy in seventeen patients with unilateral involvement was reduced from 5.1 cm (range, 3.7 to 6.5 cm) to 2.8 cm (range, 1.4 to 4.6 cm). Two patients had a positive Trendelenburg sign, and three had a slight limp at the time of the latest follow-up. No cases of nonunion or nerve palsy were encountered. Postoperative dislocations occurred in two hips. One hip showed progressive radiolucent lines around the proximal femoral sleeve within two years after the surgery, and this was followed by progressive stem subsidence. Only one femoral stem was revised.

CONCLUSIONS

Cementless, modular total hip arthroplasty combined with subtrochanteric osteotomy for the treatment of patients with prior Crowe Group-IV developmental dysplasia of the hip resulted in satisfactory outcomes. Hips with poor bone quality and a developmentally short femoral neck present technical challenges with regard to achieving sufficient rotatory stability, following osteotomy, for osseointegration of the modular implants.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions to Authors for a complete description of levels of evidence.

Minimum five-year follow-up wear measurement of longevity highly cross-linked polyethylene cup against cobalt-chromium or zirconia heads

We investigated the efficacy of combining highly cross-linked polyethylene with ceramic heads on further reduction in polyethylene wear compared with the combination with cobalt-chromium heads via PolyWare computer-assisted method. A prospective cohort study was performed on 102 cementless total hip arthroplasties using Longevity (Zimmer, Warsaw, Ind) highly cross-linked polyethylene liners. Either 26-mm zirconia heads or 26-mm cobalt-chromium heads were randomly used in 51 hips each. At a mean follow-up of 6.7 years, no significant differences were identified between the groups for total penetration rate and steady-state wear rate. Osteolysis was not observed in any hips in either group. In conclusion, no advantage was seen for the 26-mm zirconia head compared with the 26-mm cobalt-chromium head in this period.

Grafting with hydroxyapatite granules for defects of acetabular bone at revision total hip replacement

The long-term results of grafting with hydroxyapatite granules for acetabular deficiency in revision total hip replacement are not well known. We have evaluated the results of revision using a modular cup with hydroxyapatite grafting for Paprosky type 2 and 3 acetabular defects at a minimum of ten years’ follow-up. We retrospectively reviewed 49 acetabular revisions at a mean of 135 months (120 to 178). There was one type 2B, ten 2C, 28 3A and ten 3B hips. With loosening as the endpoint, the survival rate was 74.2% (95% confidence interval 58.3 to 90.1). Radiologically, four of the type 3A hips (14%) and six of the type 3B hips (60%) showed aseptic loosening with collapse of the hydroxyapatite layer, whereas no loosening occurred in type 2 hips. There was consolidation of the hydroxyapatite layer in 33 hips (66%). Loosening was detected in nine of 29 hips (31%) without cement and in one of 20 hips (5%) with cement (p = 0.03, Fisher’s exact probability test). The linear wear and annual wear rate did not correlate with loosening.

These results suggest that the long-term results of hydroxyapatite grafting with cement for type 2 and 3A hips are encouraging.

A modular femoral neck and head system works well in cementless total hip replacement for patients with developmental dysplasia of the hip

We compared a modular neck system with a non-modular system in a cementless anatomical total hip replacement (THR). Each group consisted of 74 hips with developmental hip dysplasia. Both groups had the same cementless acetabular component and the same articulation, which consisted of a conventional polyethylene liner and a 28 mm alumina head. The mean follow-up was 14.5 years (13 to 15), at which point there were significant differences in the mean total Harris hip score (modular/non-modular: 98.6 (64 to 100)/93.8 (68 to 100)), the mean range of abduction (32° (15° to 40°)/28 (0° to 40°)), use of a 10° elevated liner (31%/100%), the incidence of osteolysis (27%/79.7%) and the incidence of equal leg lengths (≥ 6 mm, 92%/61%). There was no disassociation or fracture of the modular neck.

The modular system reduces the need for an elevated liner, thereby reducing the incidence of osteolysis. It gives a better range of movement and allows the surgeon to make an accurate adjustment of leg length.

Clinical efficacy of mechanical thromboprophylaxis without anticoagulant drugs for elective hip surgery in an Asian population

To evaluate the clinical efficacy of mechanical thromboprophylaxis after elective hip surgery, we reviewed 3016 patients who underwent hip surgery at 5 centers. Primary total hip arthroplasty (THA), revision THA, and pelvic or femoral osteotomies were performed in 2648, 298, and 70 patients, respectively. Epidural anesthesia, intraoperative calf bandage, early mobilization, and intermittent pneumatic compression postoperatively with additional use of elastic stockings were the basic regimen for thromboprophylaxis. Postoperatively, no cases of fatal pulmonary embolism (PE) were encountered. One symptomatic PE and 4 symptomatic deep vein thrombosis cases were identified, all of which were successfully treated using heparin and warfarin. By 6 months, no deaths had occurred. We conclude that mechanical thromboprophylaxis without anticoagulant drugs is safe and effective for elective hip surgeries in our patient population.

Choledochal cyst associated with duodenal atresia: case report and review of the literature

We report a rare case of choledochal cyst (CC) associated with congenital duodenal atresia (DA) and annular pancreas (AP). A girl was born at 37 weeks of gestation weighing 2,974 g with a prenatal diagnosis of DA. She underwent a duodenoduodenostomy for type III DA with an AP 1 day after birth. At 4 years of age, she was admitted for evaluation of cholangitis and pancreatitis. Radiological studies demonstrated a fusiform-type CC with pancreaticobiliary maljunction (PBMJ). Excision of the CC and hepaticojejunostomy were performed. The patient was discharged without complications. Despite the fact that CC, DA, and AP are embryologically closely related entities, to the best of our knowledge, only eight such cases have been documented. We must be aware of the possible combination of CC in the follow-up of the patients with DA associated with AP.

Comparison of mini-incision total hip arthroplasty through an anterior approach and a posterior approach using navigation

This study reports on differences in the use of minimally invasive surgery for total hip arthroplasty related to the direction of cup insertion against the operating table, intraoperative hip range of motion, stability, and a choice of cup liners for both a mini-incision posterior approach (MPA) and a mini-incision anterior approach (MAA) using Stryker Navigation's CT-Hip system. The MPA group consisted of 39 consecutive patients and the MAA group consisted of 33 consecutive patients. Clinically, there was no significant difference in the average Japanese Orthopedic Association hip score or the Oxford hip score preoperatively and at 6 months and 2 years follow-up. The intraoperative joint stability measurements showed no large difference between the two groups when malpositioning of the cup was eliminated.

Comparison of navigation accuracy in THA between the mini-anterior and -posterior approaches

BACKGROUND

The accuracy of a CT-based hip navigation might depend on surgical approaches, resulting in varying accuracy of implant alignment.

METHODS

We performed primary cementless total hip arthroplasty (THA) with mini-incision surgery (MIS) to 40 well-matched patients (anterior or posterior approaches, 20 hips each), using navigation with surface registration. We investigated cup alignment using postoperative computed tomography (CT) and compared the navigation accuracy between the two approaches, i.e. the difference between intra-operative and postoperative alignments of the cup.

RESULTS

There was no significant difference between the two approaches. The mean navigation accuracies in abduction and anteversion were 2.0 degrees (SD 1.4 degrees) and 2.7 degrees (SD 1.9 degrees), respectively, in the anterior approach, and 2.4 degrees (SD 2.0 degrees) and 2.0 degrees (SD 1.4 degrees), respectively, in the posterior approach. All cup alignments were within 10 degrees of the target orientation.

CONCLUSIONS

This CT-based navigation for MIS-THA provides navigation accuracy without significant differences between the two approaches and with favourable alignment of the cup.

Embryonic rather than extraembryonic tissues have more impact on the development of placental hyperplasia in cloned mice

Somatic cell cloning by nuclear transfer (NT) in mice is associated with hyperplastic placentas at term. To dissect the effects of embryonic and extraembryonic tissues on this clone-associated phenotype, we constructed diploid (2n) fused with (<-->) tetraploid (4n) chimeras from NT- and fertilization-derived (FD) embryos. Generally, the 4n cells contributed efficiently to all the extraembryonic tissues but not to the embryo itself. Embryos constructed by 2n NT<-->4n FD aggregation developed hyperplastic placentas (0.33+/-0.22 g) with a predominant contribution by NT-derived cells. Even when the population of FD-derived cells in placentas was increased using multiple FD embryos (up to four) for aggregation, most placentas remained hyperplastic (0.36+/-0.13 g). By contrast, placentas of the reciprocal combination, 2n FD<-->4n NT, were less hyperplastic (0.15+/-0.02 g). These nearly normal-looking placentas had a large proportion of NT-derived cells. Thus, embryonic rather than extraembryonic tissues had more impact on the onset of placental hyperplasia, and that the abnormal placentation in clones occurs in a noncell-autonomous manner. These findings suggest that for improvement of cloning efficiency we should understand the mechanisms regulating placentation, especially those of embryonic origin that might control the proliferation of trophoblastic lineage cells.

MRI-based surgical simulation of transtrochanteric rotational osteotomy for femoral head osteonecrosis

Transtrochanteric rotational osteotomy (TRO) is one of the joint-preserving surgical treatments for osteonecrosis of the femoral head (ONFH). It can prevent collapse of the femoral head as necrotic lesions in the weight-bearing portion can be moved sufficiently to a less weight-bearing portion by anterior rotation, posterior rotation, or varus angulation. Patient selection and preoperative planning are important to determine indications for TRO. It has been reported that successful TRO requires at least 34% of the weight-bearing area supported by the intact part of the femoral head. However, this ratio is difficult to preoperatively quantify according to the rotation angle using conventional two-dimensional MR images or X-rays. Therefore, we developed a method of simulating TRO using three-dimensional (3D) models reconstructed from 3D MR images and applied it to serial patients with types C1 and C2 osteonecrosis at stage 1 or 2. The simulation visualized positional changes of the necrotic lesion in the weight-bearing area and enabled quantitation of the postoperative intact ratio. Our surgical simulation is useful for evaluating the postoperative intact ratio and for determining indications for TRO as well as the optimal angle of femoral head rotation and varus angulation.

Progression of osteoarthritis of the knee after unilateral total hip arthroplasty: minimum 10-year follow-up study

INTRODUCTION

Patients undergoing total hip arthroplasty (THA) exhibit changes in the alignment of lower extremities following the procedure, and these changes may exert effects on other joints over the long-term. Therefore, we investigated the course of knee osteoarthritis in patients undergoing long-term follow up after THA, in addition to the relationship between the course of knee osteoarthritis and alignment of lower extremities.

MATERIALS AND METHODS

We retrospectively performed radiographic evaluation of the course of knee osteoarthritis (OA) after THA. Thirty patients undergoing successful unilateral THA were followed for a minimum of 10 years.

RESULTS

Eleven (33%) subjects showed progression of medial tibiofemoral OA on the non-THA side, while only three (10%) showed progression on the THA side, and this difference was significant (P = 0.033). In addition, the mechanical axes on the THA side passed through more lateral regions of the tibial plateau than those on the non-THA side (P = 0.044).

CONCLUSION

Medial tibiofemoral OA on the THA side was less likely to deteriorate than on the non-THA side. The reduced vulnerability to OA progression on the THA side may be due to the lower offset and resultant lateral shift in mechanical axes.