Ion Pairing of Cationic and Anionic Ir(III) Photosensitizers for Photocatalytic CO2 Reduction at Lipid-Membrane Surfaces

We synthesized an ion pair comprising cationic and anionic Ir(III) photosensitizers ([Ir1⁺][Ir2^-]) for photocatalytic CO₂ reduction and showed that the cationic component imparts stability, while the cyclometalating ligands in the anionic component ensure effective visible-light absorption. The triplet excited state of [Ir1⁺] is the key photoredox species in this system and is mainly generated through the transfer of triplet excitation energy from the anionic moiety due to Coulombic interactions and appropriate triplet energy alignment between the two ionic components. The positive photosensitization effect of ion pairing was demonstrated by photocatalytic CO₂ reduction in cooperation with a Re(I) molecular catalyst incorporated into a vesicle membrane.

Luminescent Thermoresponse via Excimer/Exciplex Transition of Pyrene Derivative in Polymer Networks Containing [3]Rotaxane

The modulation of molecular interaction with a [3]rotaxane structure enabled a luminescent thermoresponse with high sensitivity over a wide temperature range. Herein, a pyrene moiety was encapsulated by permethylated α-cyclodextrins and was introduced into a polymer network material of poly(vinyl alcohol) as a cross-linker. The luminescence nature associated with the pyrene moiety was continuously switched from a static pyrene-pyrene excimer emission mode at 193 K to a dynamic pyrene-dimethylaniline (DMA) exciplex emission mode at 293 K. A series of [3]rotaxane structures revealed the impact of supramolecular control of the interaction among pyrenes and DMA. Consequently, the continuously coupled two luminescent modes of pyrene (excimer and exciplex) provided a monotonical luminescence change over a wide temperature range (100 K) with high sensitivity of the wavelength variation (0.64 nm/K) as a distinguished thermoresponsive material to visualize the thermal information.

Effects of Alkyl Ester Chain Length on the Toughness of PolyAcrylate-Based Network Materials

Polyacrylate-based network materials are widely used in various products owing to their facile synthesis via radical polymerization reactions. In this study, the effects of alkyl ester chains on the toughness of polyacrylate-based network materials were investigated. Polymer networks were fabricated via the radical polymerization of methyl acrylate (MA), ethyl acrylate (EA), and butyl acrylate (BA) in the presence of 1,4-butanediol diacrylate as a crosslinker. Differential scanning calorimetry and rheological measurements revealed that the toughness of MA-based networks drastically increased compared with that of EA- and BA-based networks; the fracture energy of the MA-based network was approximately 10 and 100 times greater than that of EA and BA, respectively. The high fracture energy was attributed to the glass transition temperature of the MA-based network (close to room temperature), resulting in large energy dissipation via viscosity. Our results set a new basis for expanding the applications of polyacrylate-based networks as functional materials.

Fabrication of Photoprocessable Materials via Photopolymerization Using an Acid-Induced Photocleavable Platinum-Acetylide Crosslinker

Photopolymerization and photoprocessing are core technologies for molding and tuning polymer materials. However, they are incompatible with single materials owing to their contradictory photoreactivity. Herein, an acid-induced photocleavable crosslinker, a platinum-acetylide complex covered by permethylated cyclodextrins, enables the fabrication of photoprocessable materials via photopolymerization with N-(2-hydroxyethyl)acrylamide. The polymer networks are molded by 365 nm irradiation as well as softened and degraded by a cooperative reaction with HCl as an acidic additive under 365 nm UV light, or 470 nm visible light in the presence of a photosensitizer. Moreover, the crosslinker is applied to a photoadhesive triggered by 365 nm irradiation. The adhesion is detachable on-demand through acid-induced photodegradation with the same wavelength and intensity of irradiation. Thus, acid-induced photocleavage allows the integration of light-induced molding and processing under various lights of various wavelengths, opening up new strategies for polymer technologies.

Multistate Structural Switching of [3]Catenanes with Cyclic Porphyrin Dimers by Complexation with Amine Ligands

Catenanes with multistate switchable properties are promising components for next-generation molecular machines and supramolecular materials. Herein, we report a ligand-controlled switching method, a novel method for the multistate switching of catenanes controlled by complexation with added amine ligands. To verify this method, a [3]catenane comprising cyclic porphyrin dimers with a rigid π-system has been synthesized. Owing to the rigidity, the relative positions among the cyclic components of the [3]catenane can be precisely controlled by complexation with various amine ligands. Moreover, ligand-controlled multistate switching affects the optical properties of the [3]catenanes: the emission intensity can be tuned by modulating the sizes and coordination numbers of integrated amine ligands. This work shows the utility of using organic ligands for the structural switching of catenanes, and will contribute to the further development of multistate switchable mechanically interlocked molecules.

Systematic Synthesis of Macrocycles Bearing up to Six 2,2'-Bipyridine Moieties through Self-Assembled Double Helix Structure

A new synthetic strategy for macrocycles bearing multiple coordination moieties was developed. A self-assembled double helix structure, composed of two linear strands bearing 2,2'-bipyridine units and Cu(I) ions, provided access to macrocycles bearing a defined number of 2,2'-bipyridine moieties and a defined ring size, via an olefin-metathesis reaction between two linear strands in the helix. The double helix structure improved the selectivity of the macrocycle synthesis by bringing the reaction points in close proximity even in the case of large macrocycles.

Insulation of a coumarin derivative with [1]rotaxane to control solvation-induced effects in excited-state dynamics for enhanced luminescence

A coumarin derivative bearing a [1]rotaxane structure with permethylated α-cyclodextrins suppressed unwanted solvation-induced effects and increased luminescent quantum yields in medium- and high-polarity solvents. The non-radiative decay was suppressed by the twist in the π-conjugated system and the radiative decay was enhanced by the suppression of the polarity-induced structural changes.

Stochastic Binding Dynamics of a Photoswitchable Single Supramolecular Complex

In this work, a real-time precise electrical method to directly monitor the stochastic binding dynamics of a single supramolecule based on the host-guest interaction between a cyclodextrin and an azo compound is reported. Different intermolecular binding states during the binding process are distinguished by conductance signals detected from graphene-molecule-graphene single-molecule junctions. In combination with theoretical calculations, the reciprocating and unidirectional motions in the trans form as well as the restrained reciprocating motion in the cis form due to the steric hindrance is observed, which could be reversibly switched by visible and UV irradiation. The integration of individual supramolecules into nanocircuits not only offers a facile and effective strategy to probe the dynamic process of supramolecular systems, but also paves the way to construct functional molecular devices toward real applications such as switches, sensors, and logic devices.

Linked Rotaxane Structure Restricts Local Molecular Motions in Solution to Enhance Fluorescence Properties of Tetraphenylethylene

The restriction of local molecular motions is critical for improving the fluorescence quantum yields (FQYs) and the photostability of fluorescent dyes. Herein, we report a supramolecular approach to enhance the performance of fluorescent dyes by incorporating a linked rotaxane structure with permethylated α-cyclodextrins. Tetraphenylethylene (TPE) derivatives generally exhibit low FQYs in solution due to the molecular motions in the excited state. We show that TPE with linked rotaxane structures on two sides displays up to 15-fold higher FQYs. Detailed investigations with variable temperature ¹ H NMR, UV-Vis, and photoluminescence spectroscopy revealed that the linked rotaxane structure rigidifies the TPE moiety and thus suppresses the local molecular motions and non-radiative decay. Moreover, the linked rotaxane structure enhances the FQY of the dye in various solvents, including aqueous solutions, and improves the photostability through the inhibition of local molecular motions in the excited TPE.

Precision synthesis of linear oligorotaxanes and polyrotaxanes achieving well-defined positions and numbers of cyclic components on the axle

Interest in macromolecules has increased because of their functional properties, which can be tuned using precise organic synthetic methods. For example, desired functions have been imparted by controlling the nanoscale structures of such macromolecules. In particular, compounds with interlocked structures, including rotaxanes, have attracted attention because of their unique supramolecular structures. In such supramolecular structures, the mobility and freedom of the macrocycles are restricted by an axle and dependent on those of other macrocycles, which imparts unique functions to these threaded structures. Recently, methods for the ultrafine engineering and synthesis, as well as functions, of "defined" rotaxane structures that are not statistically dispersed on the axle (i.e., control over the number and position of cyclic molecules) have been reported. Various synthetic strategies allow access to such well-defined linear oligo- and polyrotaxanes, including [1]rotaxanes and [n]rotaxanes (mostly n > 3). These state-of-the-art synthetic methods have resulted in unique functions of these oligo-and polyrotaxane materials. Herein, we review the effective synthetic protocols and functions of precisely constructed one-dimensional oligomers and polymers bearing defined threaded structures, and discuss the latest reports and trends.

Electrical detection of ppb region NO2 using Mg-porphyrin-modified graphene field-effect transistors

The trace detection of NO₂ through small sensors is essential for air quality measurement and the health field; however, small sensors based on electrical devices cannot detect NO₂ with the desired selectivity and quantitativity in the parts per billion (ppb) concentration region. In this study, we fabricated metalloporphyrin-modified graphene field-effect transistors (FETs). Mg-, Ni-, Cu-, and Co-porphyrins were deposited on the graphene FETs, and the transfer characteristics were measured. With the introduction of NO₂ in the ppb concentration region, the FETs of pristine graphene and Ni-, Cu-, and Co-porphyrin-modified graphene showed an insufficient response, whereas the Mg-porphyrin-modified graphene exhibited large voltage shifts in the transport characteristics. This indicates that Mg-porphyrin acts as an adsorption site for NO₂ molecules. An analysis of the Dirac-point voltage shifts with the introduction of NO₂ indicates that the shifts were well-fitted with the Langmuir adsorption isotherm model, and the limit of detection for NO₂ was found to be 0.3 ppb in N₂. The relationship between the mobility and the Dirac-point voltage shift with the NO₂ concentration shows that the complex of NO₂ and Mg-porphyrin behaves as a point-like charge impurity. Moreover, the Mg-porphyrin-modified graphene FETs show less response to other gases (O₂, H₂, acetic acid, trimethylamine, methanol, and hexane), thus indicating high sensitivity for NO₂ detection. Furthermore, we successfully demonstrated the quantitative detection of NO₂ in air, which is near the environmental standards. In conclusion, the results of the Mg-porphyrin-modified graphene FETs enable a rapid, easy, and selective detectability.

Maximizing Conversion of Surface Click Reactions for Versatile Molecular Modification on Metal Oxide Nanowires

Click reactions (e.g., Huisgen cycloaddition) on metal oxide nanostructures offer a versatile and robust surface molecular modification for various applications because they form strong covalent bonds in a wide range of molecular substrates. This study reports a rational strategy to maximize the conversion rate of surface click reactions on single-crystalline ZnO nanowires by monitoring the reaction progress. p-Polarized multiple-angle incidence resolution spectrometry (pMAIRS) and Fourier-transformed infrared (FT-IR) spectroscopy were employed to monitor the reaction progress of an azide-terminated self-assembled monolayer (SAM) on single-crystalline ZnO nanowires. Although various reaction parameters including the concentration of Cu(I) catalysts, triazolyl ligands, solvents, and target alkynes were systematically examined for the surface click reactions, 10-30% of terminal azide on the nanowire surface remained unreacted. Temperature-dependent FT-IR measurements revealed that such unreacted residual azides deteriorate the thermal stability of the nanowire molecular layer. To overcome this observed conversion limitation of click reactions on nanostructure surfaces, we considered the steric hindrance around the closely packed SAM reaction points, then experimented with dispersing the azide moiety into a methyl-terminated SAM. The mixed-SAM method significantly improved the azide conversion rate to almost 100%. This reaction method enables the construction of spatially patterned molecular surface modifications on metal oxide nanowire arrays without detrimental unreacted azide groups.

A single-molecule electrical approach for amino acid detection and chirality recognition

One of the ultimate goals of analytic chemistry is to efficiently discriminate between amino acids. Here we demonstrate this ability using a single-molecule electrical methodology based on molecular nanocircuits formed from stable graphene-molecule-graphene single-molecule junctions. These molecular junctions are fabricated by covalently bonding a molecular machine featuring a permethylated-β-cyclodextrin between a pair of graphene point contacts. Using pH to vary the type and charge of the amino acids, we find distinct multimodal current fluctuations originating from the different host-guest interactions, consistent with theoretical calculations. These conductance data produce characteristic dwell times and shuttling rates for each amino acid, and allow accurate, statistical real-time, in situ measurements. Testing four amino acids and their enantiomers shows the ability to distinguish between them within a few microseconds, thus paving a facile and precise way to amino acid identification and even single-molecule protein sequencing.

Suppression of Undesirable Isomerization and Intermolecular Reactions of Double Bonds by a Linked Rotaxane Structure

For luminescent materials, the isomerization and intermolecular reactions of their double bonds are often undesirable because they cause a reduction in the luminescence properties of the π-system. Herein, we report a new methodology to simultaneously prevent isomerization and intermolecular reactions by utilizing the steric effect of a linked rotaxane structure. The ring units are covalently linked in order to prevent any undesired shuttling effect from occurring during isomerization. In addition, the insulated structure provides robust optical properties by prevention of intermolecular reactions. Bulky linked rotaxane structures on both sides of the N=N and C=C double bonds suppress E/Z isomerization; photoluminescence quantum yield (PLQY) measurements reveal that this results in suppression of PLQY reduction caused by isomerization. Moreover, an improvement in the stability under light irradiation and air atmosphere is demonstrated.

Mechanical switching of current-voltage characteristics in spiropyran single-molecule junctions

The electrical properties of a single-molecule junction of spiropyran are investigated through the break junction (BJ) method, and the current-voltage (I-V) characteristics are switched from rectified to symmetric through mechanical stimulus. This phenomenon indicates isomerization from spiropyran to merocyanine. In addition, an increase in the conductance associated with isomerization is observed.

Synthesis of Insulated Heteroaromatic Platinum-Acetylide Complexes with Color-Tunable Phosphorescence in Solution and Solid States

Phosphorescence colors of cyclodextrin-based insulated Pt-acetylide complexes were tuned by the molecular engineering of the chromophores. A series of Pt complexes bearing various acetylide ligands, including heteroaromatics, were prepared via self-inclusion of the linked macrocycles with the complexes. The decline in the inclusion efficiency derived from the heteroaromatics was overcome by the late-stage insulation via intramolecular slippage after the construction of the Pt-acetylide complexes. The cyclic protection of the thus-formed complexes prevented phosphorescence quenching via molecular interactions, even in the solid state. Accordingly, the tuned emission colors in a dilute system were replicated in the solid state.

Macroscopic Change in Luminescent Color by Thermally Driven Sliding Motion in [3]Rotaxanes

Systematic investigation of rotaxane structures has revealed a rational design for thermally driven switching of their macroscopic properties. At low temperature, the luminophore is insulated by the macrocycles and displays monomer emission, whereas at high temperature, the luminophore is exposed owing to a change in the macrocyclic location distribution and interacts with external molecules, affording a thermally driven luminescent color change with high reversibility and responsiveness. This macroscopic switching through efficient thermal sliding was made possible by appropriate tuning of both the macrocycle-luminophore interactions within the rotaxane and the coupling between the excited luminophore and external molecules in an exciplex. The ability to switch properties by a simple and clean thermal stimuli should expand the utilization of rotaxanes as components of thermally driven molecular systems.

Insulated conjugated bimetallopolymer with sigmoidal response by dual self-controlling system as a biomimetic material

Biological systems are known to spontaneously adjust the functioning of neurotransmitters, ion channels, and the immune system, being promoted or regulated through allosteric effects or inhibitors, affording non-linear responses to external stimuli. Here we report that an insulated conjugated bimetallopolymer, in which Ru(II) and Pt(II) complexes are mutually connected with insulated conjugations, exhibits phosphorescence in response to CO gas. The net profile corresponds to a sigmoidal response with a dual self-controlling system, where drastic changes were exhibited at two threshold concentrations. The first threshold for activation of the system is triggered by the depolymerization of the non-radiative conjugated polymer to luminescent monomers, while the second one for regulation is triggered by the switch in the rate-determining step of the Ru complex. Such a molecular design with cooperative multiple transition metals would provide routes for the development of higher-ordered artificial molecular systems bearing bioinspired responses with autonomous modulation.

Synthetic Methodology for Structurally Defined and Insulated Molecular Wires Bearing Non-centrosymmetric Conjugated Axle Components via Iterative Intramolecular Slippage

Insulated molecular wires (IMWs) bearing non-centrosymmetric conjugated axle components were precisely synthesized via iterative cross-coupling reactions in organic solvents and subsequent intramolecular slippage transformation in aqueous solvents. This programmable synthetic procedure selectively afforded both insulated and uninsulated molecular wires bearing oligo(phenylene ethynylene) and permethylated α-cyclodextrins with well-defined conjugation lengths and supramolecular structures. High selectivity of this method was confirmed by NMR and mass spectroscopic analyses. The resultant IMWs exhibited distinct optical properties because of different conjugation lengths and insulated structures. This synthetic strategy for structurally defined IMWs bearing non-centrosymmetric conjugated axle components could provide a platform for obtaining diverse functionalized materials useful in the fields of non-centrosymmetric molecular machines and molecular electronics.

Synthesis and Acid-Responsiveness of an Insulated π-Conjugated Polymer Containing Spiropyrans in Its Backbone

A π-conjugated polymer containing spiropyrans (SPs), which could be almost completely converted to protonated merocyanines (MCH⁺) and back to the SP form by adding an acid and a base, respectively, was developed. The insulation of the π-conjugated polymer, referred to as insulated spiropyran-containing poly(p-phenylene ethynylene) (ins-SP-PPE), using permethylated α-cyclodextrins (PM α-CD) suppressed the π-π interaction between the polymer chains containing MCH⁺, and the installation of PM α-CD improved the switching ability of SPs. The polymer exhibited repeatable acidochromism with almost complete conversion between the SP and MCH⁺ forms. Photoluminescence measurements were conducted and the acid-induced luminescence quenching of the polymer in the solution was observed, which stemmed from energy transfer from the PPE to MCH⁺ moieties. In the solid state, the quantum yield of ins-SP-PPE was more than twice that of the uninsulated polymer, which derived from the insulation effects. The acid-induced luminescence quenching was also observed in the solid state.

Luminescent and mechanical enhancement of phosphorescent hydrogel through cyclic insulation of platinum-acetylide crosslinker

An insulated Pt-acetylide complex was incorporated into a polymer network as a crosslinker to afford a phosphorescent gel.

Two-step template method for synthesis of axis-length-controlled porphyrin-containing hollow structures

π-Conjugated porphyrin-containing hollow structures with defined axis-length were successfully synthesized by a two-step template method, i.e., template-assisted cyclization and oligomerization.

Kinetic stabilization of a Ni(ii) bis(dithiobenzoate)-type complex achieved using three-dimensional insulation by a [1]rotaxane structure

We describe herein the synthesis of a Ni(ii) bis(dithiobenzoate)-type complex three-dimensionally insulated by a [1]rotaxane structure to reveal the importance of the insulation. Under cyclic voltammetry conditions, the complex showed a stable and reversible redox behavior in contrast to a non-insulated reference complex, clearly demonstrating the effectiveness of the rotaxane-type insulation as a new method of kinetic metal complex stabilization.

Rational Design for Rotaxane Synthesis through Intramolecular Slippage: Control of Activation Energy by Rigid Axle Length

We describe a new concept for rotaxane synthesis through intramolecular slippage using π-conjugated molecules as rigid axles linked with organic soluble and flexible permethylated α-cyclodextrins (PM α-CDs) as macrocycles. Through hydrophilic-hydrophobic interactions and flipping of PM α-CDs, successful quantitative conversion into rotaxanes was achieved without covalent bond formation. The rotaxanes had high activation barrier for their de-threading, so that they were kinetically isolated and derivatized even under conditions unfavorable for maintaining the rotaxane structures. (1) H NMR spectroscopy experiments clearly revealed that the restricted motion of the linked macrocycle with the rigid axle made it possible to control the kinetic stability by adjusting the length of the rigid axle in the precursor structure rather than the steric bulkiness of the stopper unit.

Synthesis of an organic-soluble π-conjugated [3]rotaxane via rotation of glucopyranose units in permethylated β-cyclodextrin

We synthesized symmetrically insulated oligo(para-phenylene) and oligothiophene with a pseudo-linked [3]rotaxane structure by full rotation of glucopyranose units via a flipping (tumbling) mechanism in the π-conjugated guest having two permethylated β-cyclodextrin units at both ends. We also succeeded in the synthesis of an organic-soluble fixed [3]rotaxane by a cross-coupling or complexation reaction of thus formed pseudo linked [3]rotaxane. Oligo(para-phenylene), oligothiophene, and porphyrin derivatives were used as π-conjugated guests with stopper groups.