Magneto-Responsive Textiles for Non-Invasive Heating

Magneto-responsive textiles have emerged lately as an important carrier in various fields, including biomedical engineering. To date, most research has been performed on single magnetic fibers and focused mainly on the physical characterization of magnetic textiles. Herein, from simple woven and non-woven textiles we engineered materials with magnetic properties that can become potential candidates for a smart magnetic platform for heating treatments. Experiments were performed on tissue-mimicking materials to test the textiles' heating efficiency in the site of interest. When the heat was induced with magneto-responsive textiles, the temperature increase in tissue-mimicking phantoms depended on several factors, such as the type of basic textile material, the concentration of magnetic nanoparticles deposited on the textile's surface, and the number of layers covering the phantom. The values of temperature elevation, achieved with the use of magnetic textiles, are sufficient for potential application in magnetic hyperthermia therapies and as heating patches or bandages.

Innovative in situ remediation of mine waters using a layered double hydroxide-biochar composite

The current demand for alternative water sources requires the incorporation of low-cost composites in remediation technologies. These represent a sustainable alternative to more expensive, commercially used adsorbents. The main objective of this comprehensive field-scale study was to incorporate the layered double hydroxides (LDHs) into the hybrid biochar-based composites and apply an innovative material to remediate As/Sb-rich mine waters. The presence of hydrous Fe oxides (HFOs) within the composite enhanced the total adsorption efficiency of the composite for As(V) and Sb(V). The kinetic data fitted a pseudo-second order model. Equilibrium experiments confirmed that the composite had a stronger interaction with As(V) than with Sb(V). The efficient removal of As(V) from mine water was achieved in both batch and continuous flow column systems, reaching up to 98% and 80%, respectively. Sb(V) showed different behavior to As(V) during mine water treatment, reaching adsorption efficiencies of up to 39% and 26% in batch and column experiments, respectively. The migration of Sb(V) in mine water was mostly attributed to its dispersion before it was able to show affinity to the composite. In general, the proposed column technology is suitable for the field remediation of small volumes of contaminated water, and thus has significant commercial potential.

Discovering the potential of an nZVI-biochar composite as a material for the nanobioremediation of chlorinated solvents in groundwater: Degradation efficiency and effect on resident microorganisms

Abiotic and biotic remediation of chlorinated ethenes (CEs) in groundwater from a real contaminated site was studied using biochar-based composites containing nanoscale zero-valent iron (nZVI/BC) and natural resident microbes/specific CE degraders supported by a whey addition. The material represented by the biochar matrix decorated by isolated iron nanoparticles or their aggregates, along with the added whey, was capable of a stepwise dechlorination of CEs. The tested materials (nZVI/BC and BC) were able to decrease the original TCE concentration by 99% in 30 days. Nevertheless, regarding the transformation products, it was clear that biotic as well as abiotic transformation mechanisms were involved in the transformation process when nonchlorinated volatiles (i.e., methane, ethane, ethene, and acetylene) were detected after the application of nZVI/BC and nZVI/BC with whey. The whey addition caused a massive increase in bacterial biomass in the groundwater samples (monitored by 16S rRNA sequencing and qPCR) that corresponded with the transformation of trichloro- and dichloro-CEs, and this process was accompanied by the formation of less chlorinated products. Moreover, the biostimulation step also eliminated the adverse effect caused by nZVI/BC (decrease in microbial biomass after nZVI/BC addition). The nZVI/BC material or its aging products, and probably together with vinyl chloride-respiring bacteria, were able to continue the further reductive dechlorination of dichlorinated CEs into nonhalogenated volatiles. Overall, the results of the present study demonstrate the potential, feasibility, and environmental safety of this nanobioremediation approach.

Magnetically Functionalized Moss Biomass as Biosorbent for Efficient Co2+ Ions and Thioflavin T Removal

Microwave synthesized iron oxide nanoparticles and microparticles were used to prepare a magnetically responsive biosorbent from Rhytidiadelphus squarrosus moss for the rapid and efficient removal of Co2+ ions and thioflavin T (TT). The biocomposite was extensively characterized using Fourier transformed infrared (FTIR), XRD, SEM, and EDX techniques. The magnetic biocomposite showed very good adsorption properties toward Co2+ ions and TT e.g., rapid kinetics, high adsorption capacity (218 μmol g-1 for Co and 483 μmol g-1 for TT), fast magnetic separation, and good reusability in four successive adsorption-desorption cycles. Besides the electrostatic attraction between the oxygen functional moieties of the biomass surface and both Co2+ and TT ions, synergistic interaction with the -FeOH groups of iron oxides also participates in adsorption. The obtained results indicate that the magnetically responsive biocomposite can be a suitable, easily separable, and recyclable biosorbent for water purification.

Peroxidase-like activity of magnetic poly(glycidyl methacrylate-co-ethylene dimethacrylate) particles

Poly(glycidyl methacrylate) (PGMA) is prone to modifications with different functional groups, magnetic fluids or direct coupling with biological molecules. The purpose of this research was to synthesize new magnetically responsive particles with peroxidase-like activity. Poly(glycidyl methacrylate-co-ethylene dimethacrylate) [P(GMA-EDMA)] particles containing carboxyl groups were obtained by emulsifier-free emulsion polymerization and hydrolysis and oxidation of PGMA with KMnO4, resulting in poly(carboxymethyl methacrylate-co-ethylene dimethacrylate) [P(CMMA-EDMA)] particles. Thionine (Th) was also attached to the particles [(P(CMMA-EDMA)-Th] via EDC/NHS chemistry to observe its effect on electron transfer during the oxidation reaction. Finally, the particles were coated with a nitric acid-stabilized ferrofluid in methanol. The resulting magnetic particles were characterized by several methods, including scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. The effect of EDMA on the P(CMMA-EDMA) particle size and size distribution was investigated; the particle size changed from 300 to 340 nm, and the particles were monodispersed with a saturation magnetization of 11 Am2/kg. Finally, the effects of temperature and pH on the peroxidase-like activity of the magnetic P(CMMA-EDMA) and P(CMMA-EDMA)-Th particles were investigated. The particles, which exhibited a high activity at pH 4-6 and at ∼37 °C, represent a highly sensitive sensor component potentially useful in enzyme-based immunoassays.

Microscale magnetic microparticle-based immunopurification of cytokinins from Arabidopsis root apex

Cytokinins (CKs) are pivotal plant hormones that have crucial roles in plant growth and development. However, their isolation and quantification are usually challenging because of their extremely low levels in plant tissues (pmol g^-1 fresh weight). We have developed a simple microscale magnetic immunoaffinity-based method for selective one-step isolation of CKs from very small amounts of plant tissue (less than 0.1 mg fresh weight). The capacity of the immunosorbent and the effect of the complex plant matrix on the yield of the rapid one-step purification were tested using a wide range of CK concentrations. The total recovery range of the new microscale isolation procedure was found to be 30-80% depending on individual CKs. Immunoaffinity extraction using group-specific monoclonal CK antibodies immobilized onto magnetic microparticles was combined with a highly sensitive ultrafast mass spectrometry-based method with a detection limit close to one attomole. This combined approach allowed metabolic profiling of a wide range of naturally occurring CKs (bases, ribosides and N⁹ -glucosides) in 1.0-mm sections of the Arabidopsis thaliana root meristematic zone. The magnetic immunoaffinity separation method was shown to be a simple and extremely fast procedure requiring minimal amounts of plant tissue.

Magnetically modified biochar for organic xenobiotics removal

Large amounts of biochar are produced worldwide for potential agricultural applications. However, this material can also be used as an efficient biosorbent for xenobiotics removal. In this work, biochar was magnetically modified using microwave-synthesized magnetic iron oxide particles. This new type of a magnetically responsive biocomposite material can be easily separated by means of strong permanent magnets. Magnetic biochar has been used as an inexpensive magnetic adsorbent for the removal of water-soluble dyes. Five dyes (malachite green, methyl green, Bismarck brown Y, acridine orange and Nile blue A) were used to study the adsorption process. The dyes adsorption could be usually described with the Langmuir isotherm. The maximum adsorption capacities reached the value 137 mg of dye per g of dried magnetically modified biochar for Bismarck brown Y. The adsorption processes followed the pseudo-second-order kinetic model and the thermodynamic studies indicated spontaneous and endothermic adsorption. Extremely simple magnetic modification of biochar resulted in the formation of a new, promising adsorbent suggested for selected xenobiotics removal.

Lead and cadmium sorption mechanisms on magnetically modified biochars

This paper discusses Cd(II) and Pb(II) sorption efficiency of biochars modified by impregnation with magnetic particles. All selected biochar characteristics were significantly affected after the modification. More specifically, the cation exchange capacity increased after the modification, except for grape stalk biochar. However, the changes in the pH value, PZC, and BET surface after modification process were less pronounced. The metal loading rate was also significantly improved, especially for Cd(II) sorption on/in nut shield and plum stone biochars (10- and 16-times increase, respectively). The results indicated that cation exchange (as a metal sorption mechanism) was strengthened after Fe oxide impregnation, which limited the desorbed amount of tested metals. In contrast, the magnetization of grape stalk biochar reduced Pb(II) sorption in comparison with that of pristine biochar. Magnetic modification is, therefore, more efficient for biochars with well-developed structure and for more mobile metals, such as Cd(II).

Applications of biosynthesized metallic nanoparticles - a review

We present a comprehensive review of the applications of biosynthesized metallic nanoparticles (NPs). The biosynthesis of metallic NPs is the subject of a number of recent reviews, which focus on the various "bottom-up" biofabrication methods and characterization of the final products. Numerous applications exploit the advantages of biosynthesis over chemical or physical NP syntheses, including lower capital and operating expenses, reduced environmental impacts, and superior biocompatibility and stability of the NP products. The key applications reviewed here include biomedical applications, especially antimicrobial applications, but also imaging applications, catalytic applications such as reduction of environmental contaminants, and electrochemical applications including sensing. The discussion of each application is augmented with a critical review of the potential for continued development.

Sorption of Water Soluble Organic Dyes on Magnetic Poly(oxy-2,6-dimethyl-1,4-phenylene)

Magnetic composite based on poly(oxy-2,6-dimethyl-1,4-phenylene) (PODMP) was prepared by melting the polymer with ε-caprolactam in a presence of fine magnetite particles. Magnetic PODMP was used for sorption of water soluble organic compounds (dyes belonging to triphenylmethane, heteropolycyclic and azo dye groups) from water solutions. There were considerable differences in the binding of the dyes tested. In general, heteropolycyclic dyes exhibited the lowest sorption.

Study of Sorption of Triphenylmethane Dyes on a Magnetic Carrier Bearing an Immobilized Copper Phthalocyanine Dye

Magnetite particles bearing covalently immobilized copper phthalocyanine dye ("blue magnetite") were prepared and used for the sorption of triphenylmethane dyes from aqueous solutions. The binding of some triphenylmethane dyes bearing two or three amino groups (basic fuchsin, crystal violet, malachite green) followed the Langmuir adsorption model. The maximum adsorption capacities were calculated. Dyes having no amino group in their molecules exhibited only low adsorption to immobilized copper phthalocyanine. The presence of amino groups in the molecules of triphenylmethane dyes seems to be necessary for their efficient binding on blue magnetite. Generally, efficient sorption of the organic compounds to immobilized copper phthalocyanine may be conditional on a cooperative effect of two parameters, viz. a certain planarity of the sorbate molecule and interaction of the central copper ion of the phthalocyanine molecule with the sorbate amino group or heterocyclic nitrogen atom.