Does anxiety influence outcome measurements in ankle replacement patients?

BACKGROUND

Total ankle arthroplasty (TAA) is increasingly used to treat end-stage ankle arthritis to restore ankle functional outcomes and alleviate pain. This treatment outcome may be influenced by pre-morbid patient anxiety.

METHODS

Twenty-five Infinity TAA implants were prospectively followed post-operatively with a mean follow-up time of 34.18 months. Demographic, clinical, and functional outcomes were assessed. Analysis was performed on the effect of anxiety, reported by the HADS, on patient-perceived postoperative pain, functioning, and quality of life.

RESULTS

Postoperative the PROMs and Range of Motion (ROM) improved significantly. Linear regression analysis and Pearson correlation showed a significant negative effect of anxiety on the postoperative patient-reported outcome measurements (EQ-5D-5L, VAS, and MOxFQ) at the end of follow-up.

CONCLUSION

Good functional, clinical, and radiographic results were observed in this prospective cohort study. Anxiety had a negative influence on the outcome of the patient-reported outcome measurements (EQ-5D-5L and MOxFQ) postoperatively.

LEVEL OF EVIDENCE

Level III, prospective cohort study.

Molecular imaging of bacterial biofilms-a systematic review

The formation of bacterial biofilms in the human body and on medical devices is a serious human health concern. Infections related to bacterial biofilms are often chronic and difficult to treat. Detailed information on biofilm formation and composition over time is essential for a fundamental understanding of the underlying mechanisms of biofilm formation and its response to anti-biofilm therapy. However, information on the chemical composition, structural components of biofilms, and molecular interactions regarding metabolism- and communication pathways within the biofilm, such as uptake of administered drugs or inter-bacteria communication, remains elusive. Imaging these molecules and their distribution in the biofilm increases insight into biofilm development, growth, and response to environmental factors or drugs. This systematic review provides an overview of molecular imaging techniques used for bacterial biofilm imaging. The techniques included mass spectrometry-based techniques, fluorescence-labelling techniques, spectroscopic techniques, nuclear magnetic resonance spectroscopy (NMR), micro-computed tomography (µCT), and several multimodal approaches. Many molecules were imaged, such as proteins, lipids, metabolites, and quorum-sensing (QS) molecules, which are crucial in intercellular communication pathways. Advantages and disadvantages of each technique, including multimodal approaches, to study molecular processes in bacterial biofilms are discussed, and recommendations on which technique best suits specific research aims are provided.

Antibiotic-Loaded Collagen Sponges in Clinical Treatment of Chronic Osteomyelitis: A Systematic Review

BACKGROUND

Chronic osteomyelitis is caused by bacterial infection of the bone and is a major problem in orthopaedic surgery. Treatment of chronic osteomyelitis requires surgical debridement accompanied by local and systemic administration of antibiotics. A widely established biodegradable local antibiotic carrier is antibiotic-loaded collagen sponges (fleeces). These sponges are commonly used in the treatment of chronic osteomyelitis, but a systematic review of their clinical efficacy and assessment of the quality of evidence have not been conducted, to our knowledge.

METHODS

This systematic review, performed according to the PRISMA statement, examined the clinical efficacy of and quality of evidence regarding different antibiotic-loaded collagen sponges in the clinical treatment of chronic osteomyelitis. Clinical efficacy was defined as eradication of infection with bone and wound-healing. In addition, the in vivo pharmacokinetics of the various collagen sponges were evaluated. Quality was based on the Level of Evidence, methodological quality, and risks of bias.

RESULTS

A total of 813 articles were screened, and 10 were included. Gentamicin-sulfate sponges and gentamicin-sulfate/gentamicin-crobefate sponges were studied. A total of 413 patients were treated, with a success rate of 91%. Reported complications were fistulas, prolonged wound drainage, and wound-healing problems. In vivo pharmacokinetic profiles showed an average local antibiotic concentration that was above the minimum inhibitory concentration for only 5 days. The general quality of the included studies was low to moderate, and there was a moderate to high risk of bias.

CONCLUSIONS

The evidence quality and Level of Evidence of the included studies were low, and the risk of bias in these studies was high. This makes the evidence regarding these sponges inconclusive, and no clinical decision-making can be based on these studies. Utilization of antibiotic-loaded collagen sponges in the treatment of chronic osteomyelitis should only be carried out with caution; studies with high-level evidence are needed.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

In vitro antimicrobial susceptibility testing methods: agar dilution to 3D tissue-engineered models

In the field of orthopaedic surgery, bacterial invasion of implants and the resulting periprosthetic infections are a common and unresolved problem. Antimicrobial susceptibility testing methods help to define the optimal treatment and identify antimicrobial resistance. This review discusses proven gold-standard techniques and recently developed models for antimicrobial susceptibility testing, while also providing a future outlook. Conventional, gold-standard methods, such as broth microdilution, are still widely applied in clinical settings. Although recently developed methods based on microfluidics and microdroplets have shown advantages over conventional methods in terms of testing speed, safety and the potential to provide a deeper insight into resistance mechanisms, extensive validation is required to translate this research to clinical practice. Recent optical and mechanical methods are complex and expensive and, therefore, not immediately clinically applicable. Novel osteoblast infection and tissue models best resemble infections in vivo. However, the integration of biomaterials into these models remains challenging and they require a long tissue culture, making their rapid clinical implementation unlikely. A method applicable for both clinical and research environments is difficult to realise. With a continuous increase in antimicrobial resistance, there is an urgent need for methods that analyse recurrent infections to identify the optimal treatment approaches. Graphical abstract Timeline of published and partly applied antimicrobial susceptibility testing methods, listed according to their underlying mechanism, complexity and application in research or clinics.

The available evidence on demineralised bone matrix in trauma and orthopaedic surgery: A systematic review

Objectives

The aim of this systematic literature review was to assess the clinical level of evidence of commercially available demineralised bone matrix (DBM) products for their use in trauma and orthopaedic related surgery.

Methods

A total of 17 DBM products were used as search terms in two available databases: Embase and PubMed according to the Preferred Reporting Items for Systematic Reviews and Meta Analyses statement. All articles that reported the clinical use of a DBM-product in trauma and orthopaedic related surgery were included.

Results

The literature search resulted in 823 manuscripts of which 64 manuscripts met the final inclusion criteria. The included manuscripts consisted of four randomised controlled trials (level I), eight cohort studies (level III) and 49 case-series (level IV). No clinical studies were found for ten DBM products, and most DBM products were only used in combination with other grafting materials. DBM products were most extensively investigated in spinal surgery, showing limited level I evidence that supports the use Grafton DBM (Osteotech, Eatontown, New Jersey) as a bone graft extender in posterolateral lumbar fusion surgery. DBM products are not thoroughly investigated in trauma surgery, showing mainly level IV evidence that supports the use of Allomatrix (Wright Medical, London, United Kingdom), DBX (DePuy Synthes, Zuchwil, Switzerland), Grafton DBM, or OrthoBlast (Citagenix Laval, Canada) as bone graft extenders.

Conclusions

The clinical level of evidence that supports the use of DBM in trauma and orthopaedic surgery is limited and consists mainly of poor quality and retrospective case-series. More prospective, randomised controlled trials are needed to understand the clinical effect and impact of DBM in trauma and orthopaedic surgery.

Cite this article: J. van der Stok, K. A. Hartholt, D. A. L. Schoenmakers, J. J. C. Arts. The available evidence on demineralised bone matrix in trauma and orthopaedic surgery: A systemati c review. Bone Joint Res 2017;6:423–432. DOI: 10.1302/2046-3758.67.BJR-2017-0027.R1.

Bone reaction to a biomimetic third-generation hydroxyapatite coating and new surface treatment for the Symax hip stem

Four uncemented Symax hip stems were extracted at three weeks and nine, 13 and 32 months, respectively, for reasons other than loosening. The reasons for implant removal were infection in two cases, recurrent dislocation in one and acetabular fracture in one. They were analysed to assess the effect and behaviour of an electrochemically deposited, completely resorbable biomimetic BONIT-hydroxyapatite (HA) coating (proximal part) and a DOTIZE surface treatment (distal part) using qualitative histology, quantitative histomorphometry and scanning electron microscopy (SEM). Early and direct bone-implant bonding with signs of active remodelling of bone and the HA coating were demonstrated by histology and SEM. No loose BONIT-HA particles or delamination of the coating were observed, and there was no inflammation or fibrous interposition at the interface.

Histomorphometry showed bone-implant contact varying between 26.5% at three weeks and 83.5% at 13 months at the HA-coated implant surface. The bone density in the area of investigation was between 24.6% at three weeks and 41.1% at 32 months. The DOTIZE surface treatment of the distal part of the stem completely prevented tissue and bone apposition in all cases, thereby optimising proximal stress transfer.

The overall features of this implant, in terms of geometry and surface texture, suggest a mechanically stable design with a highly active biomimetic coating, resulting in rapid and extensive osseo-integration, exclusively in the metaphyseal part of the stem. Early remodelling of the HA coating does not seem to have a detrimental effect on short-term bone-implant coupling. There were no adverse effects identified from either the BONIT-HA coating or the DOTIZE surface treatment.

Biological activity of tri-calciumphosphate/hydroxyl-apatite granules mixed with impacted morsellized bone graft. A study in rabbits

Reconstruction of bone defects with impacted morsellized cancellous bone grafts (MCB) is a popular method. Because of a shortage of human bone, mixing with biomaterials may be attractive. Ceramics may be used as bone graft extenders. In this study, various volume mixtures of biphasic tri-calciumphosphate/hydroxyl-apatite (TCP-HA) granules (1.5-2 mm) with MCB were examined in a non-loaded defect model in rabbits. Direct post-operatively, many 10-150 microm TCP-HA particles were present due to impaction. Irrespective to the group, after 8 weeks, virtually all MCB was resorbed and most TCP-HA granules were osseous-integrated with newly formed bone. The cross-sectional areas of TCP-HA after 8 weeks was generally smaller compared with direct post-operatively and the number of small 10-150 microm TCP-HA particles seemed reduced. Macrophages and giant cells were sparse after 8 weeks. In conclusion, the osteoconductivity of various mixtures of MCB and TCP-HA granules is not dependent on the ratio of TCP-HA over MCB. The reduced number of the 10-150microm TCP-HA particles after 8 weeks, may suggest that a cellular mediated resorption process of TCP-HA granules took place. Based on these favorable biological findings subsequent in-vivo experiments are warranted in load-bearing conditions to investigate whether these findings hold for joint reconstruction purposes.

Cemented Cup Stability during Lever-Out Testing after Acetabular Bone Impaction Grafting with Bone Graft Substitutes Mixes Containing Morselized Cancellous Bone and Tricalcium Phosphate-Hydroxyapatite Granules

Bone defects after failed total hip arthroplasty can be reconstructed with impacted morselized bone grafts and a cemented cup. In the near future the amount of bone grafts available for surgical purposes will be insufficient. Ceramic calcium phosphates [tricalcium phosphate (TCP) and hydroxyapatite (HA)] have been widely considered as potential bone graft substitutes or bone graft extenders. In the past, mechanical experiments have been performed to determine implant stability of bone grafts and ceramic TCP-HA granules mixes under a compressive load. However, in-vivo migration studies suggest that shear loading may be equally important. This in-vitro study investigated the initial stability of cups reconstructed with various mixes of bone grafts and ceramic TCP-HA granules in a lever-out situation, where shearing is the predominant loading mode. It was found that the cups reconstructed with mixes of bone graft and TCP-HA granules exhibited greater mechanical stability than the cups reconstructed with bone grafts only. It is concluded that from a mechanical standpoint, when considering shear force resistance, 50–50 per cent volume mix and 25–75 per cent volume mix of morselized cancellous bone graft and TCP-HA granules both provide adequate initial cup stability and can be used for acetabular reconstructions with the bone impaction grafting technique.

Is hydroxyapatite cement an alternative for allograft bone chips in bone grafting procedures? A mechanical and histological study in a rabbit cancellous bone defect model

To evaluate in vivo performance of hydroxyapatite cement (HAC) as a porous bone graft substitute, HAC was mixed (1:1 ratio) with either porous calcium-phosphate granules (80% tricalcium phosphate, 20% hydroxyapatite) or defatted morsellized cancellous bone (MCB) allograft and implanted bilaterally in cylindrical drill holes in distal femurs of rabbits. Groups with empty defects and impacted MCB were used for reference. After 8 weeks, one femur from each pair was examined histologically. All contralateral specimens and Time-0 specimens were used for mechanical indentation tests. Histology showed that some empty defects were filled with newly formed osteopenic bone after 8 weeks. The impacted MCB showed remodeling into new vital bone. Incorporation of the HAC/MCB composite was incomplete, whereas minimal new bone ingrowth was found in the HAC/granule composites. Though not different from each other, both composites were significantly stronger than empty defects, incorporated impacted MCB, and intact cancellous bone. At Time 0, the mechanical behavior of impacted MCB was similar to both HAC composites. In conclusion, composites of HAC and porous biomaterials can maintain relatively high strength over 8 weeks in vivo, but their incorporation into a new bony structure is slower than impacted MCB. The HAC/MCB composite showed favorable incorporation behavior.