Precise Method for the Measurement of Catalase Activity in Honey

An improved method is reported for the determination of catalase activity in honey. We tested different dialysis membranes, dialysis fluid compositions and amounts, dialysis temperatures, sample amounts, and dialysis times. The best results were obtained by dialysis of 7.50 g sample in a cellulose dialysis sack, using two 3 L portions of 0.015M sodium phosphate buffer (pH 7.0) as the dialysis fluid at 4°C for 22 h. As in previous methods, catalase activity was determined on the basis of the rate of disappearance of the substrate, H2O2, with the H2O2 determined spectrophotometrically at 400 nm in an assay system containing o-dianisidine and peroxidase. Trials indicated that the best solvent for the o-dianisidine was 0.2M sodium phosphate buffer, pH 6.1; the best starting H2O2 concentration was 3mM; the best HCl concentration for stopping the reaction was 6N; and the best sample volume for catalase measurement was 7.0 mL. Precision values (relative standard deviations for analyses of 10 subsamples of each of 3 samples) were high, ranging from 0.48% for samples with high catalase activity to 1.98% for samples with low catalase activity.

Capillary zone electrophoresis method for the determination of inorganic anions and formic acid in honey

A capillary zone electrophoresis method for the determination of inorganic anions and formic acid in honey samples was developed for the first time. The complete separation of chloride, nitrate, sulfate, phosphate, and formic acid was achieved with a simple electrolyte composed by 2 mM potassium dichromate as the carrier solution and background absorbance provider and 0.05 mM tetraethylenepentamine (TEPA) as electro-osmotic flow suppressor (pH 4.00). Injection was performed hydrostatically by elevating the sample at 10 cm for 10 s. The running voltage was -27 kV at 25 degrees C. Indirect UV absorption detection was achieved at 254 nm. The detection limit was in the range between 0.03 and 20 mg/kg, and the quantification limits ranged from 1.52 to 20.6 mg/kg. The calibration graphs were linear in the concentration range from the quantification limit to at least 2.5 g/kg for chloride, 0.25 g/kg for nitrate, 0.75 g/kg for sulfate, 1.50 g/kg for phosphate, and 0.75 g/kg for formic acid. Precision data in the honey samples analyzed showed repeatability and reproducibility relative standard deviations lower than 1.4 and 2.4% for migration time and lower than 1.8 and 4.3% for anion content, respectively. Recoveries of anions in honey samples analyzed ranged from 94.4 to 99.8%. Ten honey samples were analyzed to test the proposed method. Mean contents of 260.5, 3.93, 60.5, 139.4, and 209.3 mg/kg were found, respectively, for chloride, nitrate, sulfate, phosphate, and formic acid in analyzed honeys. These results agreed with literature data.

Rapid determination of nonaromatic organic acids in honey by capillary zone electrophoresis with direct ultraviolet detection

A rapid capillary zone electrophoresis (CZE) method with direct ultraviolet (UV) detection has been set up and developed to determine the most important nonaromatic organic acids in honey with a really simple treatment of the sample. The determination of oxalic, formic, malic, succinic, pyruvic, acetic, lactic, citric, and gluconic acids has been carried out in 4 min. The electrolyte composition was phosphate as the carrier buffer (7.5 mM NaH(2)PO(4) and 2.5 mM Na(2)HPO(4)), 2.5 mM tetradecyltrimethylammonium hydroxide (TTAOH) as electroosmotic flow modifier, and 0.24 mM CaCl(2) as selectivity modifier, with the pH adjusted at 6.40 constant value. The running voltage was -25 kV at a thermostated temperature of 25 degrees C. The injections were performed in hydrodynamic mode (30 s), and the detection mode was UV direct at 185 nm. Validation parameters of the method as detection and quantification limits, linearity, precision (repeatability and reproducibility), and recovery were also studied. The advantages related to the technique such as simplicity, short analysis times, and low consumption of chemicals as well as the good validation parameters obtained for this method permit it to be considered as adequate for routine analysis in honey.

Capillary zone electrophoresis method for the simultaneous determination of cations in honey

A capillary electrophoresis system for the simultaneous determination of cations in honey samples has been developed. The complete separation and quantification of K+, Ca2+, Na+, Mg2+, Mn2+, Ni2+ and Li+, which represent more than 99% of the total content of cations in honey, can be achieved in 4 min with only a dilution and filtration of the honey sample. Electrolyte solution was composed by 10 mM imidazole as the carrier buffer and background absorbance provider and acetic acid as the complexing agent (pH 3.60). The running voltage was + 25 kV at 25 degree C. Indirect UV detection was achieved at 185 nm. Under the optimum conditions the detection limits ranged from 0.02 to 48.2 mg/kg and the quantification limits have ranged from 0.41 to 48.7 mg/kg. Precision data in honey samples analysed have shown repeatability and reproducibility RSD (%) lower than 2.84 and 6.62%, respectively. Recoveries of cations in honey samples analysed have ranged from 88.5 to 101.8%. These cations were identified by their relative migration times with regard to Ba2+ migration time used as reference standard and they were quantified by using an external standard calibration. Twenty-five honey samples were analysed to test the proposed method. Mean contents of 1.22 x 10(3), 93, 85, 54, 11, 1.9 and 2.3 mg/kg were found, respectively, for K+, Ca2+, Na+, Mg2+, Mn2+, Ni2+ and Li+ cations in analysed honeys. These results were similar than the obtained by other authors.

Precise method for the measurement of catalase activity in honey

An improved method is reported for the determination of catalase activity in honey. We tested different dialysis membranes, dialysis fluid compositions and amounts, dialysis temperatures, sample amounts, and dialysis times. The best results were obtained by dialysis of 7.50 g sample in a cellulose dialysis sack, using two 3 L portions of 0.015 M sodium phosphate buffer (pH 7.0) as the dialysis fluid at 4 degrees C for 22 h. As in previous methods, catalase activity was determined on the basis of the rate of disappearance of the substrate, H202, with the H202 determined spectrophotometrically at 400 nm in an assay system containing o-dianisidine and peroxidase. Trials indicated that the best solvent for the o-dianisidine was 0.2 M sodium phosphate buffer, pH 6.1; the best starting H202 concentration was 3 mM; the best HCl concentration for stopping the reaction was 6 N; and the best sample volume for catalase measurement was 7.0 mL. Precision values (relative standard deviations for analyses of 10 subsamples of each of 3 samples) were high, ranging from 0.48% for samples with high catalase activity to 1.98% for samples with low catalase activity.

Significance of nonaromatic organic acids in honey

Although organic acids represent < 0.5% of honey's constituents, they make important contributions to the organoleptic, physical, and chemical properties of honey. To date, approximately 30 nonaromatic organic acids have been identified in honey, but relatively little attention has been paid to these components. This article reviews the current literature related to the significance of nonaromatic organic acids in honey; it was written with a goal of attracting researchers to study these interesting honey components. Previous research contributions on nonaromatic organic acids in honey may be classified into five main areas: (i) the antibacterial activities of these acids, (ii) the antioxidant activities of these acids, (iii) the use of these acids as possible indicators of incipient fermentation, (iv) the use of these acids for treatment of Varroa infestation, and (v) the use of these acids as factors for the characterization of both botanical and geographical origins of honeys. We conclude that nonaromatic organic acids are of interest for diverse reasons and that there is a particular need for studies regarding their possible antibacterial and antioxidant activities.

Rapid determination of minority organic acids in honey by high-performance liquid chromatography

A rapid high-performance liquid chromatographic method for the determination of organic acids in honey is reported. Malic, maleic, citric, succinic and fumaric acids were identified and quantified in 15 min. First time repeatibility, reproducibility and recoveries were determined out for these acids in honey samples. Maleic acid was also quantified for first time by a chromatographic method. The organic acids were removed from honey by using a solid-phase extraction procedure with anion-exchange cartridges. Previously, the solution of honey was adjusted to pH 10.50 with 0.1 M NaOH and stirred for 15 min at room temperature. Then, this solution was adjusted to pH 5.00 with 0.1 M H2SO4. This procedure was carried out to avoid interferences in the baseline. The chromatographic separation was achieved with only one Spherisorb ODS-2 S5 column thermostated at 25 degrees C. Metaphosphoric acid (pH 2.20) was used as mobile phase at a flow-rate of 0.7 ml/min. Organic acids were detected with a UV-vis detector (215 nm). The precision results showed that the relative standard deviations of the repeatability and reproducibility were < or =3.20% and < or =4.86%, respectively. The recoveries of the organic acids ranged from 62.9 to 99.4%. Under optimum conditions the detection limits ranged from 0.0064 to 7.57 mg/kg and the quantification limits ranged from 0.025 to 10.93 mg/kg.

Solid-phase extraction procedure to remove organic acids from honey

A solid-phase extraction procedure was applied to remove organic acids from honey. Malic, maleic, citric, succinic and fumaric acids were isolated with an anion-exchange cartridge. The different parameters which affected the extraction procedure were studied and optimised to establish the optimal conditions for maximum recovery of organic acids and minimum extraction of interferences. The optimised procedure used a cartridge which was activated with 10 ml of 0.1 M sodium hydroxide solution (percolation rate 3 ml/min). A 10 ml volume of honey solution was passed at a flow-rate of 0.5 ml/min. The cartridge was washed with 10 ml of water (3 ml/min) and organic acids were eluted with 4 ml of 0.1 M sulfuric acid (0.5 ml/min). This solution was injected directly into the chromatograph. When this procedure was carried out on standard solutions of organic acids, recoveries between 99.2 and 103.4% were found. If this procedure was applied to honey samples these recoveries were also satisfactory and ranged from 62.9 to 99.4%.

Determination of polarimetric parameters of honey by near-infrared transflectance spectroscopy

NIR transflectance spectroscopy was used to determine polarimetric parameters (direct polarization, polarization after inversion, specific rotation in dry matter, and polarization due to nonmonosaccharides) and sucrose in honey. In total, 156 honey samples were collected during 1992 (45 samples), 1995 (56 samples), and 1996 (55 samples). Samples were analyzed by NIR spectroscopy and polarimetric methods. Calibration (118 samples) and validation (38 samples) sets were made up; honeys from the three years were included in both sets. Calibrations were performed by modified partial least-squares regression and scatter correction by standard normal variation and detrend methods. For direct polarization, polarization after inversion, specific rotation in dry matter, and polarization due to nonmonosaccharides, good statistics (bias, SEV, and R(2)) were obtained for the validation set, and no statistically (p = 0.05) significant differences were found between instrumental and polarimetric methods for these parameters. Statistical data for sucrose were not as good as those of the other parameters. Therefore, NIR spectroscopy is not an effective method for quantitative analysis of sucrose in these honey samples. However, NIR spectroscopy may be an acceptable method for semiquantitative evaluation of sucrose for honeys, such as those in our study, containing up to 3% of sucrose. Further work is necessary to validate the uncertainty at higher levels.

Evolution of invertase activity in honey over two years

Invertase activity is a good parameter for evaluating honey freshness. Invertase activity evolution was determined on 57 fresh, unheated, commercially purchased Galician (northwestern Spain) floral honey samples. All honeys were stored in darkness at room temperature for up 24 months and analyzed each 6 months so as to determine the invertase activity evolution tendency for the first time. Invertase activity analysis was carried out according to Siegenthaler's method and in a simple assay, the latter showing a good precision (coefficient of variation between 0.35 and 0.66%). Initial invertase activity mean value was 163.9 (48.4-251.0) micromol of 4-nitrophenyl-alpha-D-glucopyranoside hydrolyzed/kg of honey/min. After application of the SPSS statistical package, the values of invertase activity showed five types of temporal behavior: exponential (56% of samples), linear (25% of samples), logarithmic (11% of samples), inverse (5% of samples), and quadratic (3% of samples). Linear regression equations were used to predict the invertase activity at 6, 12, 18, and 24 months from the initial Galician honeys' invertase activities; no statistical differences were found between experimental data and the activities calculated from the linear regression equations.

Major components of honey analysis by near-infrared transflectance spectroscopy

NIR transflectance spectroscopy was used to analyze fructose, glucose, and moisture in honey. A total of 161 honey samples were collected during 1992 (46), 1995 (58), and 1996 (57). Samples were analyzed by instrumental, enzymatic (fructose and glucose), and refractometric (moisture) methods. Initially, different calibrations were performed for each of the 3 years of sampling. Good predictions were obtained for all three components with equations of the particular year. But good predictions were not always obtained when the equations calculated one year were applied to samples from another year. To perform a lasting calibration, unique calibration (121 samples) and validation (40 samples) sets were built; honeys of the 3 years were included in both sets. Good statistics (bias, standard error of validation (SEV), and R(2)) were obtained for all three components of the validation set. No statistically significant differences (p = 0.05) were found between instrumental and reference methods.

Enzymatic Determination of Citric Acid in Honey by Using Polyvinylpolypyrrolidone Clarification

To characterize honey types, a citric acid determination may be useful. A citric acid determination on honey was carried out with previous polyvinylpolypyrrolidone (PVPP) clarification followed by the Boehringer-Mannheim GmbH enzymatic test. The sample solution was prepared from 2 g of honey in 100 mL of Milli-Q water. A volume of 10 mL of this sample was clarified with PVPP stirring for 1 min and filtered. The enzymatic determination was measured spectrophotometrically at 340 nm, using citrate lyase, L-malate dehydrogenase, and L-lactate dehydrogenase. With these conditions, there were no observed interference effects. The proposed method improves precision [coefficient of variation (CV) between 0.26% and 1.60%] and recovery (between 98.0% and 100.9%) on the direct enzymatic analysis (% CV between 1.02 and 2.66 and recovery between 84.0% and 115.6%). Furthermore, the cost was reduced 70% using a microtest. The method was applied to 20 honeys of Galicia (northwestern Spain), and the results ranged between 44.2 and 827.0 mg of citric acid/kg of honey (mean = 192.9 mg/kg).

Acaricide residues in honeys from Galicia (N.W. Spain)

Honey samples (101) from Galicia (N.W. Spain) were analyzed by gas chromatography (electron capture and flame ionization) for the presence of acaricides (amitraz, bromopropylate, coumaphos, and fluvalinate). Seventy-three samples were free from detectable residues. Bromopropylate residues were found in 16 samples in levels ranging from 5 to 60 microg/kg. Fluvalinate residues were found in 11 samples in levels ranging from 10 to 40 microg/kg. One sample contained 100 microg of fluvalinate per kg. Neither amitraz nor coumaphos residues were detected.

Nonacaricide Pesticide Residues in Honey: Analytical Methods and Levels Found

A bibliographic review on honey pollution with pesticides is presented. This paper reviews the methods set up for determining pesticide residues in honey samples as well as the pesticide residue levels found in European countries.

Acaricide Residues in Honey: Analytical Methods and Levels Found

A bibliographic review on the pollution of honey with acaricides is presented. This paper reviews methods for determining amitraz, bromopropylate, coumaphos, cymiazole, fluvalinate, malathion and phenothiazine residues in honey samples, as well as multiresidue methods. Acaricide residue levels found in European countries are also reviewed.