Effects of Chemicals in Reporter Gene Bioassays with Different Metabolic Activities Compared to Baseline Toxicity

High-throughput cell-based bioassays are used for chemical screening and risk assessment. Chemical transformation processes caused by abiotic degradation or metabolization can reduce the chemical concentration or, in some cases, lead to the formation of more toxic transformation products. Unaccounted loss processes may falsify the bioassay results. Capturing the formation and effects of transformation products is important for relating the in vitro effects to in vivo. Reporter gene cell lines are believed to have low metabolic activity, but inducibility of cytochrome P450 (CYP) enzymes has been reported. Baseline toxicity is the minimal toxicity a chemical can have and is caused by the incorporation of the chemical into cell membranes. In the present study, we improved an existing baseline toxicity model based on a newly defined critical membrane burden derived from freely dissolved effect concentrations, which are directly related to the membrane concentration. Experimental effect concentrations of 94 chemicals in three bioassays (AREc32, ARE-bla and GR-bla) were compared with baseline toxicity by calculating the toxic ratio (TR). CYP activities of all cell lines were determined by using fluorescence-based assays. Only ARE-bla showed a low basal CYP activity and inducibility and AREc32 showed a low inducibility. Overall cytotoxicity was similar in all three assays despite the different metabolic activities indicating that chemical metabolism is not relevant for the cytotoxicity of the tested chemicals in these assays. Up to 28 chemicals showed specific cytotoxicity with TR > 10 in the bioassays, but baseline toxicity could explain the effects of the majority of the remaining chemicals. Seven chemicals showed TR < 0.1 indicating inaccurate physicochemical properties or experimental artifacts like chemical precipitation, volatilization, degradation, or other loss processes during the in vitro bioassay. The new baseline model can be used not only to identify specific cytotoxicity mechanisms but also to identify potential problems in the experimental performance or evaluation of the bioassay and thus improve the quality of the bioassay data.

Improving wastewater-based epidemiology for new psychoactive substance surveillance by combining a high-throughput in vitro metabolism assay and LC-HRMS metabolite identification

One of the primary criteria for a suitable drug biomarker for wastewater-based epidemiology (WBE) is having a unique source representing human metabolism. For WBE studies, this means it is important to identify and monitor metabolites rather than parent drugs, to capture consumption of drugs and not fractions that could be directly disposed. In this study, a high-throughput workflow based on a human liver S9 fraction in vitro metabolism assay was developed to identify human transformation products of new chemicals, using α-pyrrolidino-2-phenylacetophenone (α-D2PV) as a case study. Analysis by liquid chromatography coupled to high resolution mass spectrometry identified four metabolites. Subsequently, a targeted liquid chromatography - tandem mass spectrometry method was developed for their analysis in wastewater samples collected from a music festival in Australia. The successful application of this workflow opens the door for future work to better understand the metabolism of chemicals and their detection and application for wastewater-based epidemiology.

Reactivity of Acrylamides Causes Cytotoxicity and Activates Oxidative Stress Response

Acrylamides are widely used industrial chemicals that cause adverse effects in humans or animals, such as carcinogenicity or neurotoxicity. The excess toxicity of these reactive electrophilic chemicals is especially interesting, as it is mostly triggered by covalent reactions with biological nucleophiles, such as DNA bases, proteins, or peptides. The cytotoxicity and activation of oxidative stress response of 10 (meth)acrylamides measured in three reporter gene cell lines occurred at similar concentrations. Most acrylamides exhibited high excess toxicity, while methacrylamides acted as baseline toxicants. The (meth)acrylamides showed no reactivity toward the hard biological nucleophile 2-deoxyguanosine (2DG) within 24 h, and only acrylamides reacted with the soft nucleophile glutathione (GSH). Second-order degradation rate constants (kGSH) were measured for all acrylamides with N,N'-methylenebis(acrylamide) (NMBA) showing the highest kGSH (134.800 M-1 h-1) and N,N-diethylacrylamide (NDA) the lowest kGSH (2.574 M-1 h-1). Liquid chromatography coupled to high-resolution mass spectrometry was used to confirm the GSH conjugates of the acrylamides with a double conjugate formed for NMBA. The differences in reactivity between acrylamides and methacrylamides could be explained by the charge density of the carbon atoms because the electron-donating inductive effect of the methyl group of the methacrylamides lowered their electrophilicity and thus their reactivity. The differences in reactivity within the group of acrylamides could be explained by the energy of the lowest unoccupied molecular orbital and steric hindrance. Cytotoxicity and activation of oxidative stress response were linearly correlated with the second-order reaction rate constants of the acrylamides with GSH. The reaction of the acrylamides with GSH is hence not only a detoxification mechanism but also leads to disturbances of the redox balance, making the cells more vulnerable to reactive oxygen species. The reactivity of acrylamides explained the oxidative stress response and cytotoxicity in the cells, and the lack of reactivity of the methacrylamides led to baseline toxicity.

Experimental exposure assessment for in vitro cell-based bioassays in 96- and 384-well plates

In vitro cell-based bioassays have great potential for applications in the human health risk assessment of chemicals. The quantification of freely dissolved concentrations (C free) in in vitro assays is essential to generate reliable data for in vitro-to-in vivo extrapolation. Existing methods for the quantification of C free are limited to low-throughput microtiter plates. The present study is a proof of principle for the applicability of a solid-phase microextraction (SPME) method for the determination of C free in the peroxisome proliferator-activated receptor gamma (PPARγ) bioassay run in 384-well plates with 80 µL medium per well. The effect concentrations obtained from 384-well plates were compared with those obtained from 96-well plates in a previous study. Nominal effect concentrations obtained using 96- and 384-well plates agreed with each other within a factor of three, and freely dissolved effect concentrations agreed within a factor of 6.5. The good degree of agreement in the results from both plate formats proves the general applicability of the SPME method for the determination of C free for bioassays in 384-well plates, making the present study a first step toward exposure assessment in high-throughput bioassays.

The Precision Toxicology Initiative

The goal of PrecisionTox is to overcome conceptual barriers to replacing traditional mammalian chemical safety testing by accelerating the discovery of evolutionarily conserved toxicity pathways that are shared by descent among humans and more distantly related animals. An international consortium is systematically testing the toxicological effects of a diverse set of chemicals on a suite of five model species comprising fruit flies, nematodes, water fleas, and embryos of clawed frogs and zebrafish along with human cell lines. Multiple forms of omics and comparative toxicology data are integrated to map the evolutionary origins of biomolecular interactions, which are predictive of adverse health effects, to major branches of the animal phylogeny. These conserved elements of adverse outcome pathways (AOPs) and their biomarkers are expect to provide mechanistic insight useful for regulating groups of chemicals based on their shared modes of action. PrecisionTox also aims to quantify risk variation within populations by recognizing susceptibility as a heritable trait that varies with genetic diversity. This initiative incorporates legal experts and collaborates with risk managers to address specific needs within European chemicals legislation, including the uptake of new approach methodologies (NAMs) for setting precise regulatory limits on toxic chemicals.

Role of bioavailability and protein binding of four anionic perfluoroalkyl substances in cell-based bioassays for quantitative in vitro to in vivo extrapolations

Perfluoroalkyl substances (PFAS) are persistent and pose a risk to human health. High throughput screening (HTS) cell-based bioassays may inform risk assessment of PFAS provided that quantitative in vitro to in vivo extrapolation (QIVIVE) can be developed. The QIVIVE ratio is the ratio of nominal (C_nom) or freely dissolved concentration (C_free) in human blood to C_nom or C_free in the bioassays. Considering that the concentrations of PFAS in human plasma and in vitro bioassays may vary by orders of magnitude, we tested the hypothesis that anionic PFAS bind to proteins concentration-dependently and therefore the binding differs substantially between human plasma and bioassays, which has an impact on QIVIVE. Solid phase microextraction (SPME) with C18-coated fibers served to quantify the C_free of four anionic PFAS (perfluorobutanoate (PFBA), perfluorooctanoate (PFOA), perfluorohexane sulfonate (PFHxS) and perfluorooctane sulfonate (PFOS)) in the presence of proteins and lipid, medium components, cells and human plasma over five orders of magnitude in concentrations. The C18-SPME method was used to quantify the non-linear binding to proteins, human plasma and medium, and the partition constants to cells. These binding parameters were used to predict C_free of PFAS in cell bioassays and human plasma by a concentration-dependent mass balance model (MBM). The approach was illustrated with a reporter gene assay indicating activation of the peroxisome proliferator-activated receptor gamma (PPARγ-GeneBLAzer). Blood plasma levels were collected from literature for occupational exposure and the general population. The QIVIVE_nom ratios were higher than the QIVIVE_free ratios due to the strong affinity to proteins and large differences in protein contents between human blood and bioassays. For human health risk assessment, the QIVIVE_free ratios of many in vitro assays need to be combined to cover all health relevant endpoints. If C_free cannot be measured, they can be estimated with the MBM and concentration-dependent distribution ratios.

Validation of an SH-SY5Y Cell-Based Acetylcholinesterase Inhibition Assay for Water Quality Assessment

The acetylcholinesterase (AChE) inhibition assay has been frequently applied for environmental monitoring to capture insecticides such as organothiophosphates (OTPs) and carbamates. However, natural organic matter such as dissolved organic carbon (DOC) co-extracted with solid-phase extraction from environmental samples can produce false-negative AChE inhibition in free enzyme-based AChE assays. We evaluated whether disturbance by DOC can be alleviated in a cell-based AChE assay using differentiated human neuroblastoma SH-SY5Y cells. The exposure duration was set at an optimum of 3 h considering the effects of OTPs and carbamates. Because loss to the airspace was expected for the more volatile OTPs (chlorpyrifos, diazinon, and parathion), the chemical loss in this bioassay setup was investigated using solid-phase microextraction followed by chemical analysis. The three OTPs were relatively well retained (loss <34%) during 3 h of exposure in the 384-well plate, but higher losses occurred on prolonged exposure, accompanied by slight cross-contamination of adjacent wells. Inhibition of AChE by paraoxon-ethyl was not altered in the presence of up to 68 mg_c /L Aldrich humic acid used as surrogate for DOC. Binary mixtures of paraoxon-ethyl and water extracts showed concentration-additive effects. These experiments confirmed that the matrix in water extracts does not disturb the assay, unlike purified enzyme-based AChE assays. The cell-based AChE assay proved to be suitable for testing water samples with effect concentrations causing 50% inhibition of AChE at relative enrichments of 0.5-10 in river water samples, which were distinctly lower than corresponding cytotoxicity, confirming the high sensitivity of the cell-based AChE inhibition assay and its relevance for water quality monitoring. Environ Toxicol Chem 2022;41:3046-3057. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

pH-Dependent Partitioning of Ionizable Organic Chemicals between the Silicone Polymer Polydimethylsiloxane (PDMS) and Water

The silicone polymer polydimethysiloxane (PDMS) is a popular passive sampler for in situ and ex situ sampling of hydrophobic organic chemicals. Despite its limited sorptive capacity for polar and ionizable organic chemicals (IOC), IOCs have been found in PDMS when extracting sediment and suspended particulate matter. The pH-dependent partitioning of 190 organics and IOCs covering a range of octanol-water partition constants log K _ow from -0.3 to 7.7 was evaluated with a 10-day shaking method using mixtures composed of all chemicals at varying ratios of mass of PDMS to volume of water. This method reproduced the PDMS-water partition constant K _PDMS/w of neutral chemicals from the literature and extended the dataset by 93 neutral chemicals. The existing quantitative structure-activity relationship between the log K _ow and K _PDMS/w could be extended with the measured K _PDMS/w linearly to a log K _ow of -0.3. Fully charged organics were not taken up into PDMS. Thirty-eight monoprotic organic acids and 42 bases showed negligible uptake of the charged species, and the pH dependence of the apparent D _PDMS/w(pH) could be explained by the fraction of neutral species multiplied by the K _PDMS/w of the neutral species of these IOCs. Seventeen multiprotic chemicals with up to three acidity constants pK _a also showed a pH dependence of D _PDMS/w(pH) with the tendency that the neutral and zwitterionic forms showed the highest D _PDMS/w(pH). D _PDMS/w(pH) of charged species of more hydrophobic multiprotic chemicals such as tetrabromobisphenol A and telmisartan was smaller but not negligible. Since these chemicals show high bioactivity, their contribution to mixture effects has to be considered when testing passive sampling extracts with in vitro bioassays. This work has further implications for understanding the role of microplastic as a vector for organic micropollutants.

High-Throughput Assessment of the Abiotic Stability of Test Chemicals in In Vitro Bioassays

Abiotic stability of chemicals is not routinely tested prior to performing in vitro bioassays, although abiotic degradation can reduce the concentration of test chemicals leading to the formation of active or inactive transformation products, which may lead to misinterpretation of bioassay results. A high-throughput workflow was developed to measure the abiotic stability of 22 test chemicals in protein-rich aqueous media under typical bioassay conditions at 37 °C for 48 h. These test chemicals were degradable in the environment according to a literature review. The chemicals were extracted from the exposure media at different time points using a novel 96-pin solid-phase microextraction. The conditions were varied to differentiate between various reaction mechanisms. For most hydrolyzable chemicals, pH-dependent degradation in phosphate-buffered saline indicated that acid-catalyzed hydrolysis was less important than reactions with hydroxide ions. Reactions with proteins were mainly responsible for the depletion of the test chemicals in the media, which was simulated by bovine serum albumin (BSA) and glutathione (GSH). 1,2-Benzisothiazol-3(2H)-one, 2-methyl-4-isothiazolinone, and l-sulforaphane reacted almost instantaneously with GSH but not with BSA, indicating that GSH is a good proxy for reactivity with electrophilic amino acids but may overestimate the actual reaction with three-dimensional proteins. Chemicals such as hydroquinones or polyunsaturated chemicals are prone to autoxidation, but this reaction is difficult to differentiate from hydrolysis and could not be simulated by the oxidant N-bromosuccinimide. Photodegradation played a minor role because cells are exposed in incubators in the dark and simulations with high light intensities did not yield realistic degradation. Stability predictions from various in silico prediction models for environmental conditions can give initial indications of the stability but were not always consistent with the experimental stability in bioassays. As the presented workflow can be performed in high throughput under realistic bioassay conditions, it can be used to provide an experimental database for developing bioassay-specific stability prediction models.

Quantitative In Vitro-to-In Vivo Extrapolation: Nominal versus Freely Dissolved Concentration

Discussions are ongoing on which dose metric should be used for quantitative in vitro-to-in vivo extrapolation (QIVIVE) of in vitro bioassay data. The nominal concentration of the test chemicals is most commonly used and easily accessible, while the concentration freely dissolved in the assay medium is considered to better reflect the bioavailable concentration but is tedious to measure. The aim of this study was to elucidate how much QIVIVE results will differ when using either nominal or freely dissolved concentrations. QIVIVE_nom and QIVIVE_free ratios, that is, the ratios of plasma concentrations divided by in vitro effect concentrations, were calculated for 10 pharmaceuticals using previously published nominal and freely dissolved effect concentrations for the activation of the peroxisome proliferator-activated receptor gamma (PPARγ) and the activation of oxidative stress response. The QIVIVE_nom ratios were higher than QIVIVE_free ratios by up to a factor of 60. The risk of in vivo effects was classified as being high or low for four chemicals using the QIVIVE_nom and for three chemicals using QIVIVE_free ratios. Unambiguous classification was possible for nine chemicals by combining the QIVIVE_nom or QIVIVE_free ratios with the respective specificity ratios (SR_nom or SR_free) of the in vitro effect data, which helps to identify whether the specific effect was influenced by cytotoxicity. QIVIVE_free models should be preferred as they account for differences in bioavailability between in vitro and in vivo, but QIVIVE_nom may still be useful for screening the effects of large numbers of chemicals because it is generally more conservative. The use of SR of the in vitro effect data as a second classification factor is recommended for QIVIVE_nom and QIVIVE_free models because a clearer picture can be obtained with respect to the likelihood that a biological effect will occur and that it is not caused by nonspecific cytotoxicity.