Reversed-flow affinity elution applied to the purification of carboxypeptidase Y

In the present study we describe a novel method for obtaining highly pure carboxypeptidase Y, or derivatives thereof, in a single-step purification procedure. The method is based on affinity chromatography and the results demonstrate that an efficient method is obtained only when the affinity gel is fully saturated with enzyme. Thus, pilot experiments are required to determine the binding capacity of the resin with respect to a given enzyme. To avoid this additional experimental effort, we have developed a method utilizing reversed-flow affinity elution. The method has been successfully employed to purify hundreds of carboxypeptidase Y mutant enzymes.

Substrates with charged P1 residues are efficiently hydrolyzed by serine carboxypeptidases when S3-P1 interactions are facilitated

The high activity of carboxypeptidase S1 with substrates having basic P1 residues is predicted to depend on the size of residue 312 in combination with the presence of a counter-charge in an alpha-helix above the S1 binding pocket. This hypothesis is tested by the construction of 32 mutant forms of carboxypeptidase Y that combines a reduction in size of residue 312 and the introduction of either a basic or an acidic residue at either position 241 or position 245. Kinetic characterization using substrates with Leu, Arg, Lys, Glu, or Asp in P1 demonstrates that most of these enzymes exhibit drastically altered catalytic properties. One mutant enzyme, N241D + W312L, hydrolyzes FA-Arg-Ala-OH with a kcat/KM value of 13 000 min-1 mM-1 corresponding to a 930-fold increase relative to the wild-type enzyme. This increased activity is due to an increase in kcat and is independent of ionic strength. The pH profile of kcat/KM exhibits an optimum around pH 5.5 similar to that observed for CPD-S1. Another mutant enzyme, L245R + W312S, hydrolyzes FA-Glu-Ala-OH and FA-Asp-Ala-OH with kcat/KM values of 5100 and 5300 min-1 mM-1, respectively, corresponding to 120 and 170-fold increases relative to wild-type values. With the latter substrate, a 280-fold reduction of KM is observed. The activity of L245R + W312S is also independent of ionic strength and displays a virtually unaltered dependence on pH. The P1 substrate preference of these two mutant enzymes for Arg versus Asp differs 2.5 x 10(6)-fold. values of single and double mutants demonstrate that the effects of reducing the size of Trp312 and introducing a charged residue at position 241 or 245 in some cases exceed 100% additivity. Thus, the double mutant enzyme gains more activation energy than can be accounted for by each individual single mutation.

The specificity of carboxypeptidase Y may be altered by changing the hydrophobicity of the S'1 binding pocket

The S'1 binding pocket of carboxypeptidase Y is hydrophobic, spacious, and open to solvent, and the enzyme exhibits a preference for hydrophobic P'1 amino acid residues. Leu272 and Ser297, situated at the rim of the pocket, and Leu267, slightly further away, have been substituted by site-directed mutagenesis. The mutant enzymes have been characterized kinetically with respect to their P'1 substrate preferences using the substrate series FA-Ala-Xaa-OH (Xaa = Leu, Glu, Lys, or Arg) and FA-Phe-Xaa-OH (Xaa = Ala, Val, or Leu). The results reveal that hydrophobic P'1 residues bind in the vicinity of residue 272 while positively charged P'1 residues interact with Ser297. Introduction of Asp or Glu at position 267 greatly reduced the activity toward hydrophobic P'1 residues (Leu) and increased the activity two- to three-fold for the hydrolysis of substrates with Lys or Arg in P'1. Negatively charged substituents at position 272 reduced the activity toward hydrophobic P'1 residues even more, but without increasing the activity toward positively charged P'1 residues. The mutant enzyme L267D + L272D was found to have a preference for substrates with C-terminal basic amino acid residues. The opposite situation, where the positively charged Lys or Arg were introduced at one of the positions 267, 272, or 297, did not increase the rather low activity toward substrates with Glu in the P'1 position but greatly reduced the activity toward substrates with C-terminal Lys or Arg due to electrostatic repulsion. The characterized mutant enzymes exhibit various specificities, which may be useful in C-terminal amino acid sequence determinations.

C-terminal incorporation of fluorogenic and affinity labels using wild-type and mutagenized carboxypeptidase Y

The ability to carry out specific C-terminal modification or labeling of peptides and proteins has a broad range of applications. It is well established that this may be achieved by protease-catalyzed transacylation reactions and that carboxypeptidase Y (CPD-Y) is suitable for this due to its broad specificity and stability in the presence of denaturants. Furthermore, CPD-Y is characterized by a S'1 binding site that is open to solvent and, thus, capable of catalyzing a transpeptidation reaction with nucleophiles that extend beyond the perimeter of the active site. However, one major drawback with CPD-Y is that the yield of the reaction is highly dependent on the nature of the leaving group; e.g., with large apolar leaving groups the yield of the reaction does not exceed 15%. In the present publication it is demonstrated that mutants of CPD-Y, designed for low leaving group dependence, efficiently incorporate biocytin amide as well as a new fluorescent nucleophile, N'-Abz-Lysine amide (ablysin amide), into peptides and proteins.

Characterization of the S1 binding site of the glutamic acid-specific protease from Streptomyces griseus

The glutamic acid-specific protease from Streptomyces griseus (SGPE) is an 18.4-kDa serine protease with a distinct preference for Glu in the P1 position. Other enzymes characterized by a strong preference for negatively charged residues in the P1 position, e.g., interleukin-1 beta converting enzyme (ICE), use Arg or Lys residues as counterions within the S1 binding site. However, in SGPE, this function is contributed by a His residue (His 213) and two Ser residues (Ser 192 and S216). It is demonstrated that proSGPE is activated autocatalytically and dependent on the presence of a Glu residue in the -1 position. Based on this observation, the importance of the individual S1 residues is evaluated considering that enzymes unable to recognize a Glu in the P1 position will not be activated. Among the residues constituting the S1 binding site, it is demonstrated that His 213 and Ser 192 are essential for recognition of Glu in the P1 position, whereas Ser 216 is less important for catalysis out has an influence on stabilization of the ground state. From the three-dimensional structure, it appears that His 213 is linked to two other His residues (His 199 and His 228), forming a His triad extending from the S1 binding site to the back of the enzyme. This hypothesis has been tested by substitution of His 199 and His 228 with other amino acid residues. The catalytic parameters obtained with the mutant enzymes, as well as the pH dependence, do not support this theory; rather, it appears that His 199 is responsible for orienting His 213 and that His 228 has no function associated with the recognition of Glu in P1.

Studies on the hydrolytic properties of (serine) carboxypeptidase Y

The activity of serine carboxypeptidases is dependent on a catalytic triad, an oxyanion hole, and a binding site equivalent to those found in the serine endopeptidases. The action of carboxypeptidase Y on substrates containing amino acids, alcohols, and amines as leaving groups is described. It is demonstrated that the features common to serine endopeptidases and carboxypeptidases are sufficient for hydrolysis of ester bonds. However, rapid hydrolysis of amide bonds is dependent on interactions between the C-terminal carboxylate group of the substrate and the C-terminal recognition site of the enzyme. Furthermore, on the basis of the pH dependencies of wild-type and mutant enzyme, combined with the ability of the enzyme to utilize binding energy to promote catalysis, alternative models for the high activity of carboxypeptidase Y at low pH are discussed. They describe how the catalytically essential histidine is maintained in its active deprotonated state through perturbation of its pKa value in the enzyme-substrate complex.

Peptide aldehyde complexes with wheat serine carboxypeptidase II: implications for the catalytic mechanism and substrate specificity

The structures of two ternary complexes of wheat serine carboxypeptidase II (CPD-WII), with a tetrapeptide aldehyde and a reaction product arginine, have been determined by X-ray crystallography at room temperature and -170 degrees. The peptide aldehydes, antipain and chymostatin, form covalent adducts with the active-site serine 146. The CPD-WII antipain arginine model has a standard crystallographic R-factor of 0.162, with good geometry at 2.5 A resolution for data collected at room temperature. The -170 degrees C model of the chymostatin arginine complex has an R-factor of 0.174, with good geometry using data to 2.1 A resolution. The structures suggest binding subsites N-terminal to the scissile bond. All four residues of chymostatin are well-localized in the putative S1 through S4 sites, while density is apparent only in S1 and S2 for antipain. In the S1 site, Val340 and 341, Phe215 and Leu216 form a hydrophobic binding surface, not a pocket, for the P1 phenylalanyl side-chain of chymostatin. The P1 arginyl of antipain also binds at this site, but the positive charge appears to be stabilized by additional solvent molecules. Thus, the hybrid nature of the S1 site accounts for the ability of CPD-WII to accept both hydrophobic and basic residues at P1. Hydrogen bonds to the peptide substrate backbone are few and are made primarily with side-chains on the enzyme. Thus, substrate recognition by CPD-WII appears to have nothing in common with that of the other families of serine proteinases. The hemiacetal linkages to the essential Ser146 are of a single stereoisomer with tetrahedral geometry, with an oxygen atom occupying the "oxyanion hole" region of the enzyme. This atom accepts three hydrogen bonds, two from the polypeptide backbone and one from the positively-charged amino group of bound arginine, and must be negatively charged. Thus, the combination of ligands forms an excellent approximation to the oxyanion intermediate formed during peptide hydrolysis. Surprisingly, the (R) stereochemistry at the hemiacetal linkage is opposite to that expected by comparison to previously determined structures of peptide aldehydes complexed with Streptomyces griseus proteinase A. This is shown to be a consequence of the approximate mirror symmetry of the arrangement of catalytic groups in the two families of serine proteases and suggests that the stereochemical course of the two enzymatic reactions differ in handedness.

Increase of the P1 Lys/Leu substrate preference of carboxypeptidase Y by rational design based on known primary and tertiary structures of serine carboxypeptidases

The P1 substrate preference of serine carboxypeptidases, as expressed by the Lys/Leu ratio, differs by up to 10(5)-fold. Predictions of the major determinants of this preference are made by correlating primary and tertiary structures to substrate preferences. In carboxypeptidase Y from yeast it is predicted that Trp312 constitutes such a determinant, reducing the P1 Lys/Leu substrate preference of this enzyme. The predictions are tested by the construction and kinetic characterization of ten mutant enzymes of carboxypeptidase Y. All of these enzymes exhibit changes in their P1 substrate preference. Generally, small decreases in activity (kcat/Km) are observed with substrates containing uncharged P1 side chains. With substrates containing acidic P1 side chains, i.e., FA-Glu-Ala-OH, the activity generally increases slightly, 7-fold in the case of W312K. The most dramatic effects of the Trp312 substitutions are observed with substrates containing basic P1 side chains, i.e., kcat/Km for the hydrolysis of Fa-Lys-Ala-OH with W312E has increased 1150-fold, exclusively as a result of increased kcat values. Similar results have previously been obtained by mutational substitution at position 178 of carboxypeptidase Y. The construction and kinetic characterization of position 178 + 312 double mutants demonstrate that the kinetic effects of substitutions at these two positions are not additive. The P1 Lys/Leu substrate preference of one double mutant, L178D + W312D, has changed 380,000-fold as compared to the wild type enzyme, and the overall P1 substrate preference of this enzyme closely resembles that of carboxypeptidase WII from wheat.

Silyl protection in the solid-phase synthesis of N-linked glycopeptides. Preparation of glycosylated fluorogenic substrates for subtilisins

The trimethylsilyl (TMS) group was used for protection of the hydroxy groups of three disaccharide 1-amino-alditols and of the glycosylamines of glucose, maltotriose and maltoheptose. The per-O-trimethylsilylated derivatives were coupled with N alpha-Fmoc-Asp(Cl)-OPfp 7 to give six glycosylated building blocks for the solid-phase synthesis of N-linked glycopeptides. Building block 8 was used in the synthesis of five internally quenched fluorescent substrates which were studied by enzymatic hydrolysis with savinase, a subtilisin-type enzyme.

2.8-A structure of yeast serine carboxypeptidase

The structure of monomeric serine carboxypeptidase from Saccharomyces cerevisiae (CPD-Y), deglycosylated by an efficient new procedure, has been determined by multiple isomorphous replacement and crystallographic refinement. The model contains 3333 non-hydrogen atoms, all 421 amino acids, 3 of 4 carbohydrate residues, 5 disulfide bridges, and 38 water molecules. The standard crystallographic R-factor is 0.162 for 10,909 reflections observed between 20.0- and 2.8-A resolution. The model has rms deviations from ideality of 0.016 A for bond lengths and 2.7 degrees for bond angles and from restrained thermal parameters of 7.9 A2. CPD-Y, which exhibits a preference for hydrophobic peptides, is distantly related to dimeric wheat serine carboxypeptidase II (CPD-WII), which has a preference for basic peptides. Comparison of the two structures suggests that substitution of hydrophobic residues in CPD-Y for negatively charged residues in CPD-WII in the binding site is largely responsible for this difference. Catalytic residues are in essentially identical configurations in the two molecules, including strained main-chain conformational angles for three active site residues (Ser 146, Gly 52, and Gly 53) and an unusual hydrogen bond between the carboxyl groups of Glu 145 and Glu 65. The binding of an inhibitor, benzylsuccinic acid, suggests that the C-terminal carboxylate binding site for peptide substrates is Asn 51, Gly 52, Glu 145, and His 397 and that the "oxyanion hole" consists of the amides of Gly 53 and Tyr 147. A surprising result of the study is that the domains consisting of residues 180-317, which form a largely alpha-helical insertion into the highly conserved cores surrounding the active site, are quite different structurally in the two molecules. It is suggested that these domains have evolved much more rapidly than other parts of the molecule and are involved in substrate recognition.

The activity of carboxypeptidase Y toward substrates with basic P1 amino acid residues is drastically increased by mutational replacement of leucine 178

A random mutagenesis study on carboxypeptidase Y has previously suggested that Leu178 is situated in the S1 binding pocket, and this has later been confirmed by the three-dimensional structure. We here report the mutational replacement of Leu178 with Trp, Phe, Ala, Ser, Cys, Asn, Asp, or Lys and the kinetic characterization of each mutant, using substrates systematically varied at the P1 position. The general effect of these substitutions is a reduced kcat/Km for substrates with uncharged amino acid residues in the P1 position, little effect on those with acidic residues, and an increased kcat/Km for those with basic amino acid residues. There is a clear correlation between the reduction in kcat/Km for substrates with uncharged P1 side chains and the nature of the residue at position 178. A small reduction is observed when Leu178 is replaced by another hydrophobic amino acid residue, a larger reduction when it is replaced by a polar residue, and a very large reduction when it is replaced by a charged residue. When Leu178 is replaced by Asp, kcat/Km is reduced by a factor of 2200 for a substrate with Val in the P1 position. The kcat/Km values for the hydrolysis of substrates with charged P1 side chains are increased when Leu178 is replaced by an amino acid residue with the opposite charge, and they are decreased when it is replaced by a residue with the same charge. Surprisingly, all mutants (except L178K) exhibit increased activity with substrates with basic P1 side chains.(ABSTRACT TRUNCATED AT 250 WORDS)

Peptide synthesis catalyzed by the Glu/Asp-specific endopeptidase. Influence of the ester leaving group of the acyl donor on yield and catalytic efficiency

We recently described a two-step enzymatic semisynthesis of the superpotent analog of human growth hormone releasing factor, [desNH2Tyr1,D-Ala2,Ala15]-GRF(1-29)-NH2 (4), from the precursor, [Ala15,29]-GRF(4-29)-OH (1). C-Terminal amidation of 1 to form [Ala15]-GRF(4-29)-NH2 (2) was achieved by carboxypeptidase-Y-catalyzed exchange of Ala29-OH for Arg-NH2. The target analog 4 was then obtained by acylation of segment 2 with desNH2Tyr-D-Ala-Asp(OH)-OR (3) (R = CH3CH2- or 4-NO2C6H4CH2-) catalyzed by the V8 protease. In this paper we report on the use of the recently isolated Glu/Asp-specific endopeptidase (GSE) from Bacillus licheniformis, which is shown to be an efficient catalyst for the segment condensation of 2 and 3. GSE is more stable than the V8 protease under the conditions employed (20% DMF, pH 8.2, 37 degrees C). The extent of conversion of 2 into 4 is limited by proteolyses at Asp3-Ala4 and Asp25-Ile26. However, this proteolysis is virtually eliminated by use of the appropriate ester leaving group, R. A systematic study of the kinetics of the GSE-catalyzed segment condensations of 2 and a series of tripeptide esters, desNH2Tyr-D-Ala-Asp(OH)-OR (3) [R = CH3CH2- (3a), CH3- (3b), ClCH2CH2- (3c), C6H5CH2- (3d), 4-NO2C6H4CH2- (3e)] revealed that rate of aminolysis versus proteolysis, and hence the conversion of 2 into 4, increase with increasing specificity (Vmax/Km) of GSE for the tripeptide ester.(ABSTRACT TRUNCATED AT 250 WORDS)

Effects of introduced aspartic and glutamic acid residues on the P'1 substrate specificity, pH dependence and stability of carboxypeptidase Y

Carboxypeptidase Y is a serine carboxypeptidase isolated from Saccharomyces cerevisiae with a preference for C-terminal hydrophobic amino acid residues. In order to alter the inherent substrate specificity of CPD-Y into one for basic amino acid residues in P'1, we have introduced Asp and/or Glu residues at a number of selected positions within the S'1 binding site. The effects of these substitutions on the substrate specificity, pH dependence and protein stability have been evaluated. The results presented here demonstrate that it is possible to obtain significant changes in the substrate preference by introducing charged amino acids into the framework provided by an enzyme with a quite different specificity. The introduced acidic amino acid residues provide a marked pH dependence of the (kcat/Km)FA-A-R-OH/(kcat/Km)FA-A-L-OH ratio. The change in stability upon introduction of Asp/Glu residues can be correlated to the difference in the mean buried surface area between the substituted and the substituting amino acid. Thus, the effects of acidic amino acid residues on the protein stability depend upon whether the introduced amino acid protrudes from the solvent accessible surface as defined by the surrounding residues in the wild type enzyme or is submerged below.

Recognition of C-terminal amide groups by (serine) carboxypeptidase Y investigated by site-directed mutagenesis

Serine carboxypeptidases have the ability to hydrolyze peptides as well as peptide amides. Previously, it has been demonstrated that Asn51 and Glu145 (in the protonated form) each donate a hydrogen bond to the alpha-carboxylate of peptide substrate. It is here demonstrated by characterization of carboxypeptidase Y derivatives, mutationally altered at positions 51 and 145, that the same groups are involved in the interaction with the C-terminal carboxyamide group of peptide amides. Asn51 donates a hydrogen bond to the C = O group of the substrate, and Glu145 (in the charged form) accepts one from the NH2 group of the substrate. Thus, the ionic state of Glu145 is different when peptides are hydrolyzed as compared with when peptide amides are hydrolyzed. This explains why Km for the hydrolysis of peptides increases with pH, whereas it remains constant for peptide amides. As a consequence, kcat/Km for the hydrolysis of peptide amides is higher than for the hydrolysis of peptides at pH > 8. At physiological pH, peptides and peptide amides are hydrolyzed with rates of the same order of magnitude; this is in accordance with reports describing that serine carboxypeptidases are involved in the degradation of biologically active peptide amides.

A conserved glutamic acid bridge in serine carboxypeptidases, belonging to the alpha/beta hydrolase fold, acts as a pH-dependent protein-stabilizing element

Serine endopeptidases of the chymotrypsin family contain a salt bridge situated centrally within the active site, the acidic component of the salt bridge being adjacent to the catalytically essential serine. Serine carboxypeptidases also contain an acidic residue in this position but it interacts through a short hydrogen bond, probably of low-barrier type, with another acidic residue, hence forming a "glutamic acid bridge." In this study, the residues constituting this structural element in carboxypeptidase Y have been replaced by site-specific mutagenesis. It is demonstrated that the glutamic acid bridge contributes significantly to the stability of the enzyme below pH 6.5 and has an adverse effect at pH 9.5. Carboxypeptidase WII from wheat contains 2 such bridges, and it is more stable than carboxypeptidase Y at acidic pH.

Improvement of the applicability of carboxypeptidase Y in peptide synthesis by protein engineering

Asn51 and Glu145 of (serine) carboxypeptidase Y function as binding sites for the C-terminal carboxylate group of peptide substrates, and Glu65 is involved in orienting these two amino acid residues. A series of mutants of carboxypeptidase Y where these three amino acid residues have been replaced were investigated for their applicability in transacylation reactions with amino acid esters as acceptors. With H-Val-OMethyl as the nucleophile, the fraction of aminolysis is significantly higher than with the corresponding amino acid, suggesting a beneficial effect of blocking the alpha-carboxylate group. Increasing the size of the alcohol moiety, i.e., -OEthyl, -OPropyl or OButyl, has an adverse effect on the binding of the nucleophile and on the maximum yield of aminolysis. Replacement of Asn51 and Glu145 with Ala or Gly has a pronounced beneficial effect both on binding and the maximum fraction of aminolysis. However, the results do not establish a specific type of interaction between the enzyme and these valine esters. It is probable that the rotational freedom around the ester bond allows multiple binding modes, depending on both the leaving group and type of structural change within the binding site. From a synthetic point of view, some of the mutant enzymes are much better than the wildtype enzyme when amino acid esters are used as nucleophiles.

Portion-mixing peptide libraries of quenched fluorogenic substrates for complete subsite mapping of endoprotease specificity

A solid-phase assay for the complete subsite mapping of the active site of endoproteases has been developed. A library of resin-bound protease substrates was synthesized both on kieselguhr-supported polyamide resin and on a polyethylene glycol-poly-(N,N-dimethylacrylamide) copolymer type of resin that allows proteases to diffuse into the interior and perform their catalytic activity. Anthranilic acid and 3-nitrotyrosine were used as an efficient donor-acceptor pair for the resonance energy transfer. The synthesis was performed in a manual library generator that allows simple wet mixing of the beads and parallel washing procedures. After treatment with subtilisin Carlsberg, fluorescing beads were collected and subjected to peptide sequencing, affording the preferred sequences, their cleavage bond, and a semiquantitative estimation of the turnover. A statistical distribution of preferred amino acids was obtained for each subsite. The result was compared with data from kinetic studies in solution.

Site-directed mutagenesis on (serine) carboxypeptidase Y. A hydrogen bond network stabilizes the transition state by interaction with the C-terminal carboxylate group of the substrate

The three-dimensional structure of (serine) carboxypeptidase Y suggests that the side chains of Trp49, Asn51, Glu65, and Glu145 could be involved in the recognition of the C-terminal carboxylate group of peptide substrates. The mutations Trp49-->Phe; Asn51-->Ala, Asp, Glu, Gln, Ser, or Thr; Glu65-->Ala; and Glu145-->Ala, Asp, Asn, Gln, or Ser have been performed. Enzymes with Ala at these positions were also produced as double and triple mutations. These mutations have only little effect on the esterase activity of the enzyme, consistent with the absence of a hydrogen bond acceptor in the P1' position of such substrates. On the other hand, removal of the hydrogen-bonding capacity by incorporation of Ala at any of these four positions results in reduced peptidase activity, in particular when Asn51 and Glu145 are replaced. The results are consistent with Trp49 and Glu65 orienting Asn51 and Glu145 by hydrogen bonds, such that these can function as hydrogen bond donors (Glu145 only in its protonated carboxylic acid form) with the C-terminal alpha-carboxylate group of the peptide substrate as acceptor. However, it appears that strong interactions are formed only in the transition state since the combined removal of Asn51 and Glu145 reduces kcat about 100-fold and leaves KM practically unchanged. The results obtained with enzymes in which Asn51 or Glu145 has been replaced with other residues possessing the capacity to donate a hydrogen bond demonstrate that there is no flexibility with respect to the nature of the hydrogen bond donor at position 145, whereas enzymes with Gln, Ser, or Thr at position 51 exhibit much higher activity than N51A, although none of them reaches the wild-type level. With carboxypeptidase Y as well as other serine carboxypeptidases the binding of peptide substrates in the ground state (KM) is adversely affected by an increase in pH. It is shown that deprotonation of a single ionizable group with a pKa of 4.3 on the enzyme is responsible for this pH effect. The results show that the group involved is either Glu65 or Glu145, the latter being the more probable. The effect of this ionization on KM is explained by charge repulsion between the carboxylate group of the substrate and that of Glu145, hence preventing substrate from binding.

A glutamic acid specific serine protease utilizes a novel histidine triad in substrate binding

Proteases specific for cleavage after acidic residues have been implicated in several disease states, including epidermolysis, inflammation, and viral processing. A serine protease with specificity toward glutamic acid substrates (Glu-SGP) has been crystallized in the presence of a tetrapeptide ligand and its structure determined and refined to an R-factor of 17% at 2.0-A resolution. This structure provides an initial description of the design of proteolytic specificity for negatively charged residues. While the overall fold of Glu-SGP closely resembles that observed in the pancreatic-type serine proteases, stabilization of the negatively charged substrate when bound to this protein appears to involve a more extensive part of the protease than previously observed. The substrate carboxylate is bound to a histidine side chain, His213, which provides the primary electrostatic compensation of the negative charge on the substrate, and to two serine hydroxyls, Ser192 and Ser216. Glu-SGP displays maximum activity at pH 8.3, and assuming normal pKa's, the glutamate side chain and His213 will be negatively charged and neutral, respectively, at this pH. In order for His213 to carry a positive charge at the optimal pH, its pKa will have to be raised by at least two units. An alternative mechanism for substrate charge compensation is suggested that involves a novel histidine triad, His213, His199, and His228, not observed in any other serine protease. The C-terminal alpha-helix, ubiquitous to all pancreatic-type proteases, is directly linked to this histidine triad and may also play a role in substrate stabilization.(ABSTRACT TRUNCATED AT 250 WORDS)

The primary structure of carboxypeptidase S1 from Penicillium janthinellum

The complete amino acid sequence of carboxypeptidase S1 from Penicillium janthinellium has been determined by N-terminal sequencing of the reduced and vinylpyridinated protein and of peptides obtained by cleaved with cyanogen bromide, iodosobenzoic acid, hydroxylamine, endoproteinase LysC, endoproteinase AspN and Glu-specific proteinase from B. licheniformis. The enzyme consists of a single peptide chain of 433 amino acid residues and contains 9 half-cystine residues and one glycosylated asparagine residue. A comparison to other carboxypeptidases shows that the enzyme is homologous to carboxypeptidase-Y and carboxypeptidase-MIII from malt. Specificity and binding of substrates are discussed from a three-dimensional model based on the known structure of carboxypeptidase-Y from Saccharomyces cereviciae and carboxypeptidase II from wheat.

Mutational replacements of the amino acid residues forming the hydrophobic S4 binding pocket of subtilisin 309 from Bacillus lentus

The amino acid side chains of Ile107, Leu126, and Leu135 participate in the formation of the important hydrophobic S4 binding pocket of the subtilisin Savinase. Ile107 and Leu126, located on each side of the pocket, point toward each other, and Leu135 is situated at the bottom of the pocket. These amino acid residues have been substituted for other hydrophobic amino acid residues by site-directed mutagenesis, and the resulting enzymes have been characterized with respect to their P4 substrate preferences. The Leu126-->Ala or Phe substitutions reduce kcat/KM for the hydrolysis of all substrates to around 5% without altering the substrate preference. It is concluded that Leu126 is an essential structural part of the pocket which cannot be replaced without seriously affecting catalysis, consistent with the fact that Leu126 is conserved among all subtilisins. In contrast, the Ile107-->Gly, Ala, Val, Leu, or Phe and Leu135-->Ala, Val, or Phe substitutions strongly influence the P4 substrate preference, and some of the mutants exhibit large specificity changes for particular substrates when compared to wild-type Savinase. The results can be rationalized on the basis of Ile107 and Leu135 being responsible for steric repulsion of branched aliphatic and aromatic P4 side chains, respectively. Leu135 exclusively interacts with aromatic P4 side chains, and its replacement with less bulky amino acid residues alleviates steric repulsion such that the activity toward this type of substrates is enhanced. Conversely, the introduction of a more bulky amino acid residue at position 135 produces more steric repulsion and reduces the activity toward substrates with aromatic P4 side chains.(ABSTRACT TRUNCATED AT 250 WORDS)

Application of quantitative structure-activity relationship modeling to the evaluation of the changes in enzymatic activity of carboxypeptidase Y upon chemical modifications

A series of 18 phenacyl bromide and iodoacetamide analogues have been synthesized and used to alkylate Met-398 situated in the S'1 binding site of carboxypeptidase Y. The course of the reactions was monitored by measurements of the peptidase and esterase activities. All except four of the reagents reacted selectively, and from these preparations the modified enzymes were purified and kinetically characterized toward a methyl ester substrate and a peptide substrate with a large leaving group in the P'1 position. The Km, kcat, and kcat/Km for the hydrolysis of these substrates have been quantitatively correlated to parameters describing the properties of the modification reagents. The esterase activity depends only on the steric bulk of the para-substituents with the phenacyl-modified enzymes, but on both steric and electronic factors of the N-alkyl substituents with the acetamide modified enzymes. The peptidase activity, on the other hand, is dependent on steric and electronic factors with both types of modified enzymes.

Significance of hydrophobic S4-P4 interactions in subtilisin 309 from Bacillus lentus

The subtilisins have an extended substrate binding cleft comprising at least 8 subsites. Two pockets at the S1 and S4 sites are particularly conspicuous, and the interactions between substrate and these two pockets are very important for the substrate specificity. Phe residues have mutationally been introduced at one of positions 102, 128, 130, and 132 of the subtilisin Savinase from Bacillus lentus to investigate the effects of introducing bulky groups along the rim of the S4 binding pocket. It is shown that the marked P4 preference of wild-type Savinase for aromatic groups is eliminated by the Gly102-->Phe and Ser128-->Phe mutations, indicating that bulky groups at positions 102 and 128 block the S4 binding site. In contrast, the activity toward hydrophilic P4 residues is not nearly as affected by these mutations, suggesting that the binding mode of the P4 side chain is dependent on its properties. Introduction of a bulky -CH2-S-CH2-CH2-pyridyl group at position 128, by mutational incorporation of Cys followed by chemical modification with 2-vinylpyridine, has essentially the same effect. The Ser130-->Phe mutation hardly affects the activity of the enzyme while the Ser-->Phe mutation at position 132 renders the preference for hydrophobic groups in P4 even more pronounced. This mutation furthermore affects the size of the S4 pocket. An analysis of double mutants at positions 132 and 104 suggests that the S4 region is flexible and is adjusted upon binding of substrates.

Peptide amidation by enzymatic transacylation and photolysis

A series of model peptides with a C-terminal protected amide group were prepared by enzymatic transacylation. The protection groups were removed by photolysis to give the warranted peptide amides in high yields. Furthermore, fragments of human calcitonin were prepared. Various protective groups were employed, and the pH, solvent and concentration dependency of the enzymatic transcylation were examined. The photo-cleavage reaction was examined for wavelength, concentration and pH dependency. It was shown that the optimal yields required addition of a chemical scavenger for the photolysis byproducts.

C-terminal amidation of calcitonin by carboxypeptidase Y catalyzed transpeptidation with a photocleavable nucleophile

The C-terminal amidation of calcitonin represents an important technological problem. A method using a serine carboxypeptidase-catalyzed transpeptidation reaction in combination with photochemical cleavage to give the warranted peptide amide is described. The overall yield is higher than 95%.

Mutational replacements in subtilisin 309. Val104 has a modulating effect on the P4 substrate preference

The previous notion that the amino acid side chain at position 104 of subtilisins is involved in the binding of the side chain at position P4 of the substrate has been investigated. The amino acid residue Val104 in subtilisin 309 has been replaced by Ala, Arg, Asp, Phe, Ser, Trp and Tyr by site-directed mutagenesis. It is shown that the P4 specificity of this enzyme is not determined solely by the amino acid residue occupying position 104, as the enzyme exhibits a marked preference for aromatic groups in P4, regardless of the nature of the position-104 residue. With hydrophilic amino acid residues at this position, no involvement is seen in binding of either hydrophobic or hydrophilic amino acid residues at position P4 of the substrates. The substrate with Asp in P4 is an exception, as the preference for this substrate is increased dramatically by introduction of an arginine residue at position 104 in the enzyme, presumably due to a substrate-induced conformational change. However, when position 104 is occupied by hydrophobic residues, it is highly involved in binding of hydrophobic amino acid residues, either by increasing the hydrophobicity of S4 or by determining the size of the pocket. The results suggest that the amino acid residue at position 104 is mobile such that it is positioned in the S4 binding site only when it can interact favourably with the substrate's side chain at position P4.

Refined atomic model of wheat serine carboxypeptidase II at 2.2-A resolution

The crystal structure of the homodimeric serine carboxypeptidase II from wheat (CPDW-II, M(r) 120K) has been determined and fully refined at 2.2-A resolution to a standard crystallographic R factor of 16.9% using synchrotron data collected at the Brookhaven National Laboratory. The model has an rms deviation from ideal bond lengths of 0.018 A and from bond angles of 2.8 degrees. The model supports the general conclusions of an earlier study at 3.5-A resolution and will form the basis for investigation into substrate binding and mechanistic studies. The enzyme has an alpha + beta fold, consisting of a central 11-stranded beta-sheet with a total of 15 helices on either side. The enzyme, like other serine proteinases, contains a "catalytic triad" Ser146-His397-Asp338 and a presumed "oxyanion hole" consisting of the backbone amides of Tyr147 and Gly53. The carboxylate of Asp338 and imidazole of His397 are not coplanar in contrast to the other serine proteinases. A comparison of the active site features of the three families of serine proteinases suggests that the "catalytic triad" should actually be regarded as two diads, a His-Asp diad and a His-Ser diad, and that the relative orientation of one diad with respect to the other is not particularly important. Four active site residues (52, 53, 65, and 146) have unfavorable backbone conformations but have well-defined electron density, suggesting that there is some strain in the active site region. The binding of the free amino acid arginine has been analyzed by difference Fourier methods, locating the binding site for the C-terminal carboxylate of the leaving group. The carboxylate makes hydrogen bonds to Glu145, Asn51, and the amide of Gly52. The carboxylate of Glu145 also makes a hydrogen bond with that of Glu65, suggesting that one or both may be protonated. Thus, the loss of peptidase activity at pH > 7 may in part be due to deprotonation of Glu145. The active site does not reveal exposed peptide amides and carbonyl oxygen atoms that could interact with substrate in an extended beta-sheet fashion. The fold of the polypeptide backbone is completely different than that of trypsin or subtilisin, suggesting that this is a third example of convergent molecular evolution to a common enzymatic activity. Furthermore, it is suggested that the active site sequence motif "G-X-S-X-G/A", often considered the hallmark of serine peptidase or esterase activity, is fortuitous and not the result of divergent evolution.(ABSTRACT TRUNCATED AT 400 WORDS)

Interdependency of the binding subsites in subtilisin

Subtilisins are endopeptidases with an extended binding cleft comprising at least eight subsites, and kinetic studies have revealed that subsites distant from the scissile bond are important in determining the substrate preference of the enzymes. With the subtilisin enzyme Savinase, the interdependency of the individual Sn-Pn interactions has been investigated. It was found that the contributions from each subsite interaction to kcat/KM are not always additive. Such interdependency was also observed between subsites which are remote from each other. With a series of substrates covering S6 to S'4 of Savinase, it was observed that favorable amino acids in P1 or, more significantly, P4 of the substrate shield adverse effects of less favorable amino acids at other positions. Thus, an upper limit of kcat/KM was observed, suggesting a limit on the amount of substrate interaction energy which can be converted into transition-state stabilization. Furthermore, with substrates in which all positions had been optimized, an upper limit of kcat/KM (approximately 2 x 10(9) min-1 M-1) was seen, both for a substrate with a high kcat and for one with a low KM. These results emphasize that the design of optimal substrates or substrate-derived inhibitors for endopeptidases preferably should be based on subsite mappings where interdependent substrate-subsite interactions have been eliminated.

Extensive comparison of the substrate preferences of two subtilisins as determined with peptide substrates which are based on the principle of intramolecular quenching

Subtilisins are serine endopeptidases with an extended binding cleft comprising at least eight binding subsites. Interestingly, subsites distant from the scissile bond play a dominant role in determining the specificity of the enzymes. The development of internally quenched fluorogenic substrates, which allow polypeptides of more than 11 amino acids to be inserted between the donor and the acceptor, has rendered it possible to perform a highly systematic mapping of the individual subsites of the active sites of subtilisin BPN' from Bacillus amyloliquefaciens and Savinase from Bacillus lentus. For each enzyme, the eight positions S5-S'3 were characterized by determination of kcat/KM values for the hydrolysis of substrates in which the amino acids were systematically varied. The results emphasize that in both subtilisin BPN' and Savinase interactions between substrate and S4 and S1 are very important. However, it is apparent that interactions between other subsites and the substrate exert a significant influence on the substrate preference. The results are rationalized on the basis of the structural data available for the two enzymes.

Purification and characterization of two serine carboxypeptidases from Aspergillus niger and their use in C-terminal sequencing of proteins and peptide synthesis

A procedure was developed to prepare in large amounts two carboxypeptidases, CPD-I and CPD-II, from Aspergillus niger. They were each shown to be serine proteases and single-chain monomers with molecular masses of ca. 81 kDa and containing 22% carbohydrates. Amino acid analysis, carbohydrate determination, and N-terminal sequencing (20 to 25 residues) were performed on each enzyme. CPD-I showed sequence homologies with malt carboxypeptidase II, while the N terminus of CPD-II was different from that of any known serine carboxypeptidase. Like carboxypeptidase Y from Saccharomyces cerevisiae and carboxypeptidase III from malt, CPD-II contained a free sulfhydryl group that could play a role in catalysis. Both A. niger enzymes had pH optima of about 4 and were unstable above pH 7. Their specificities for substrate positions P1 and P'1 were characterized by use of, as substrates, a series of N-blocked amino acid esters and dipeptides. Both enzymes were specific for Arg, Lys, and Phe in P1. CPD-I preferred hydrophobic residues in P'1, while CPD-II was highly specific for Arg and Lys in this position. Each displayed an original specificity when P1 and P'1 were considered together. The specificities were also studied by analyzing the time course of the release of amino acids from eight different peptides of various lengths. CPD-I and CPD-II appeared to be quite suitable for C-terminal sequence studies as well as for the synthesis of peptide bonds. The latter was studied with two peptide esters as aminolysis substrates and a series of amino acid amides as nucleophiles.(ABSTRACT TRUNCATED AT 250 WORDS)

Substrate preferences of glutamic-acid-specific endopeptidases assessed by synthetic peptide substrates based on intramolecular fluorescence quenching

The substrate preferences of the easily available Glu/Asp-specific enzymes from Staphyllococcus aureus (V8), Bacillus licheniformis and Streptomyces griseus have been extensively investigated using a series of synthetic peptide substrates, containing an N-terminal anthraniloyl group and a 3-nitrotyrosine close to the C-terminus, allowing the fluorimetric monitoring of substrate hydrolysis by the decrease in intramolecular quenching. All three enzymes hydrolysed Glu-Xaa peptide bonds approximately 1000-fold faster than Asp-Xaa bonds and they are consequently more appropriately termed Glu-specific enzymes. The difference in kcat/Km for the hydrolysis of substrates with Glu and Asp is primarily due to a difference in kcat. The enzymes appear to hydrolyse all types of Glu-Xaa bonds, although those with Xaa as Asp and, in particular, Xaa as Pro, are hydrolysed with very low rates. The influence of the nature of the amino acid residues at the substrate positions P2, P3, P4, P'1 and P'2 has been determined and it is shown that the enzyme from S. griseus exhibits the most narrow substrate preference. The results are useful in connection with fragmentation of proteins for sequencing purposes as well as for cleavage of fusion proteins.

Proline-specific endopeptidases from microbial sources: isolation of an enzyme from a Xanthomonas sp

An extensive screening among microorganisms for the presence of post-proline-specific endopeptidase activity was performed. This activity was found among ordinary bacteria from soil samples but not among fungi and actinomycetes. This result is in contrast to the previous notion that this activity is confined to the genus Flavobacterium. A proline endopeptidase was isolated from a Xanthomonas sp. and characterized with respect to physicochemical and enzymatic properties. The enzyme is composed of a single peptide chain with a molecular weight of 75,000. The isoelectric point is 6.2. It is inhibited by diisopropylfluorophosphate and may therefore be classified as a serine endopeptidase. The activity profile is bell shaped with an optimum at pH 7.5. By using synthetic peptide substrates and intramolecular fluorescence quenching it was possible to study the influence of substrate structure on the rate of hydrolysis. The enzyme specifically hydrolyzed Pro-X peptide bonds. With Glu at position X, low rates of hydrolysis were observed; otherwise the enzyme exhibited little preference for particular amino acid residues at position X. A similar substrate preference was observed with respect to the amino acid residue preceding the prolyl residue in the substrate. The enzyme required a minimum of two amino acid residues toward the N terminus from the scissile bond, but further elongation of the peptide chain by up to six amino acid residues caused only a threefold increase in the rate of hydrolysis. Attempts to cleave at the prolyl residues in oxidized RNase failed, indicating that the enzyme does not hydrolyze long peptides, a peculiar property it shares with other proline-specific endopeptidases.

Isolation and amino acid sequence of a glutamic acid specific endopeptidase from Bacillus licheniformis

An endopeptidase cleaving specifically at the carboxyl side of acidic amino acid residues, preferentially at glutamic acid, has been isolated from a commercial extract obtained by fermentation with Bacillus licheniformis. Using ion-exchange chromatography and affinity chromatography on bacitracin-Sepharose, it was possible, from 100 ml commercial extract, to isolate 100 mg homogeneous enzyme in a yield of 50%. It is the first description of a large-scale isolation of a Glu/Asp-specific enzyme. The preparation was essentially free of contaminating activities. The isolated enzyme consists of one peptide chain of 222 amino acid residues and has a calculated molecular mass of 23,589 Da. The determined amino acid sequence shows similarity to the Glu/Asp-specific enzymes previously isolated from Staphylococcus aureus V8, Actinomyces sp. and Streptomyces thermovulgaris. The substrate preference of the enzyme has been investigated. Although non-specific cleavages were observed after prolonged hydrolysis at high enzyme concentrations the enzyme appears to be essentially specific for Glu-Xaa and Asp-Xaa, with strong preference for the former. The isolated enzyme exhibits a bell-shaped pH/activity profile with an optimum at pH 7.5-8.0. The activity is adversely affected by high ionic strength and beneficially affected by the inclusion of calcium ions in the assay medium. The enzyme is completely inhibited by diisopropylfluorophosphate, suggesting that it is a serine endopeptidase. It is partially inhibited by EDTA.

Introduction of a free cysteinyl residue at position 68 in the subtilisin Savinase, based on homology with proteinase K

Two subfamilies of the subtilisins, distinguished by the presence or absence of a free cysteinyl residue near the essential histidyl residue of the catalytic triad, are known. In order to evaluate the significance of the presence of this -SH group a cysteinyl residue has been introduced by site-directed mutagenesis into the cysteine-free subtilisin-like enzyme from Bacillus lentus, i.e. Savinase. The free cysteine affects the enzyme activity only slightly but renders it sensitive to mercurials presumably due to an indirect effect. The results indicate that the -SH group is not involved in catalysis.

Fragmentation of proteins by S. aureus strain V8 protease. Ammonium bicarbonate strongly inhibits the enzyme but does not improve the selectivity for glutamic acid

Staphylococcus aureus strain V8 protease is a serine endopeptidase which cleaves peptide bonds at the carboxyl side of Glu and Asp. Specific cleavage at Glu has previously been achieved in ammonium bicarbonate whereas in sodium phosphate cleavage at both Glu and Asp was observed. However, it is shown here that bicarbonate does not restrict the specificity to Glu-X bonds, it simply inhibits the enzyme. The degradation of a mixture of oxidized insulin and glucagon proceeds similarly in the two buffers, although faster in phosphate.

The primary structure of the glutamic acid-specific protease of Streptomyces griseus

The amino acid sequence and part of the DNA sequence of a glutamic acid-specific serine protease from Streptomyces griseus is reported. This protease is shown to be homologous with other serine proteases. An improved purification protocol for this enzyme is described.

Anthranilamide and nitrotyrosine as a donor-acceptor pair in internally quenched fluorescent substrates for endopeptidases: multicolumn peptide synthesis of enzyme substrates for subtilisin Carlsberg and pepsin

The preparations of N alpha-Fmoc-3-nitro-L-tyrosine and N-Boc-anthranilic acid Dhbt ester and their application to parallel multiple column solid-phase peptide synthesis is described. A series of peptide substrates containing an anthraniloyl group at the amino terminus and a 3-nitrotyrosyl residue close to the carboxyl terminus have been synthesized. The fluorescence of the anthraniloyl group, intramolecularly quenched by the 3-nitrotyrosine, increases with cleavage of peptide bonds situated between the two groups. The quenching mechanism is of the long-range resonance energy transfer type and long peptide substrates were constructed and used for kinetic measurement on subtilisin Carlsberg and pepsin. Complete quenching was observed even with more than 20 A between the centers of the chromophores, and substrates with up to 50 A between the chromophores were synthesized. The importance of long substrates for optimal enzymatic activity was demonstrated.

Binding of mercury(II) to protein thiol groups: a study of proteinase K and carboxypeptidase Y

Chemically modified enzymes have been prepared by incorporating an -Hg-L group into proteinase K and carboxypeptidase Y at the thiol groups of Cys-73 and Cys-341, respectively (L = CN- or I-). The -S-Hg-13CN group has been applied as a spectroscopic label for carbon-13 NMR spectroscopy.

Amidation of growth hormone releasing factor (1-29) by serine carboxypeptidase catalysed transpeptidation

The applicability of serine carboxypeptidase catalysed transpeptidation reactions, using amino acid amides as nucleophiles, for C-terminal amidation of peptides has been investigated. With the aim of converting an unamidated precursor into GRF(1-29)-NH2, an interesting biologically active derivative of growth hormone releasing factor, a number of model reactions were initially investigated. In such a transpeptidation reaction, where the C-terminal amino acid is replaced by the amino acid amide, used as nucleophile, the C-terminal amino acid residue of the substrate can be chosen freely since it functions as leaving group and does not constitute part of the product. Since the C-terminal sequence of GRF(1-29)-NH2 is -Met-Ser-Arg-NH2 the model reactions Bz-Met-Ser-X-OH (X = Ala, Leu, Arg) + H-Arg-NH2----Bz-Met-Ser-Arg-NH2 + H-X-OH were first studied. With carboxypeptidase Y and X = Ala or Leu the amidated product could be obtained of 98% and 41%, respectively. With carboxypeptidase W-II and X = Arg a yield of no more than 72% could be obtained. The choice of Ala as leaving group in combination with carboxypeptidase Y therefore appeared optimal. With the longer peptide Bz-Leu-Gln-Asp-Ile-Met-Ser-Ala-OH the amidated product could be obtained in a yield of 78%, using carboxypeptidase Y, the only other product being Bz-Leu-Gln-Asp-Ile-Met-Ser-OH, formed due to the competing hydrolysis reaction. The full length peptide GRF(1-28)-Ala-OH was synthesized by the continuous flow polyamide solid-phase method.(ABSTRACT TRUNCATED AT 250 WORDS)

A highly active and oxidation-resistant subtilisin-like enzyme produced by a combination of site-directed mutagenesis and chemical modification

The subtilisins are known to be susceptible to chemical oxidation due to the conversion of Met222 into the corresponding sulfoxide. A number of derivatives with resistance towards oxidation have previously been prepared by replacement of this group with the other 19 amino acid residues. Unfortunately, the activities of these enzymes were of the order of 1-10% of that obtained with the wild-type enzyme. In contrast, the oxidation-labile cysteine mutant exhibited much higher activity, suggesting that this is associated with the presence of a sulphur atom in the amino acid at position 222. It is shown here that it is possible to maintain a sulphur atom in the amino acid at position 222 without the enzyme becoming labile towards oxidation. A subtilisin from Bacillus lentus, subtilisin 309, in which Met222 was replaced with a cysteinyl residue by site-directed mutagenesis was modified with thioalkylating reagents. Treatment of such enzyme derivatives with H2O2 revealed that their stabilities towards oxidation had increased significantly compared to both wild-type and unmodified [Cys222]subtilisin. One of the chemically modified enzyme derivatives, [Me-S-Cys222]subtilisin, exhibited a kcat/Km value of 56% of that obtained with the wild-type enzyme when assayed against the substrate Suc-Ala-Ala-Pro-Phe-NH-Ph-NO2 (Suc, succinyl) and it exhibited 89% activity when tested in an assay with dimethyl casein as a substrate. The corresponding values obtained for unmodified [Cys222]subtilisin were lower, i.e. 39% for the dimethyl casein activity and 46% for the kcat/Km for the hydrolysis of Suc-Ala-Ala-Pro-Phe-NH-Ph-NO2. This demonstrates the feasibility of replacing the oxidation-labile methionyl residue group in a subtilisin enzyme with a group stable towards oxidation without substantially reducing the activity.

Crystallization of serine carboxypeptidases

Crystallization of three different serine carboxypeptidases has been achieved by the method of hanging-drop vapor diffusion. Serine carboxypeptidases II from wheat bran and malted barley crystallize isomorphously from polyethylene glycol solutions at room temperature (pH 4 to 7) in space group P4(1)2(1)2 or enantiomorph with cell dimensions of a = b = 98.2 A and c = 209.5 A. The crystals diffract to about 2.3 A resolution using rotating-anode X-ray generators. Assuming a dimer of Mr 120,000 in the asymmetric unit, Vm = 2.1 A3/dalton. These crystals appear suitable for structural studies. A genetically engineered serine carboxypeptidase from yeast, which lacks three of four glycosylation sites present in the wild-type, has also been crystallized by vapor diffusion against methylpentanediol at 4 degrees C, pH 6.4 to 8.0.

Primary structure of carboxypeptidase III from malted barley

The primary structure of malt carboxypeptidase III has been determined. The enzyme is a single N-terminally blocked polypeptide chain containing 411 amino acid residues. The sequence of these amino acid residues was deduced from analysis of fragments of the polypeptide chain obtained by chemical cleavages with either cyanogen bromide or hydroxylamine and by enzymatic cleavages with either trypsin, S. aureus V8 protease or proteinase A from yeast. A glycosylated asparagine was found in position 71. The determined sequence was 97% homologous with the amino acid sequence derived from the nucleotide sequence of a gene coding for a wheat protein postulated to be a carboxypeptidase. The malt carboxypeptidase III sequence showed 34% homology with the amino acid sequence of the single-chain carboxypeptidase Y, and about 25% homology with the combined A- and B-chains of malt carboxypeptidase I and II as well as wheat carboxypeptidase II.

Inactivation of carboxypeptidase Y by mutational removal of the putative essential histidyl residue

Carboxypeptidase Y is a serine carboxypeptidase assumed to contain a catalytic triad similar to the serine endopeptidases. On the basis of the homology between various serine carboxypeptidases His-397 is suspected to be part of the catalytic triad. To test this it was exchanged with Ala and Arg by site-directed mutagenesis of the cloned PRC1 gene. The catalytic efficiency of the mutant enzymes were reduced by a factor of 2 X 10(4) and 7 X 10(2), respectively, confirming the key role of His-397 in catalysis. Treatment of Ala-397-CPD-Y with Hg++ or CNBr, hence modifying Cys-341 located in the vicinity of the active site abolished the residual activity of the enzyme, indicating an additional involvement of this residue in catalysis.

C-terminal sequence determination of peptides degraded with carboxypeptidases of different specificities and analyzed by 252-Cf plasma desorption mass spectrometry

Identification of the truncated peptides by plasma desorption mass spectrometry in C-terminal sequence determination with carboxypeptidases offers several advantages over analysis of the liberated amino acids. It is possible to perform in situ digestion of a nitrocellulose-bound sample already used for molecular weight determination and thus obtain sequence information without further sample consumption. In time-course analysis the analytical information, although not obtained in real time, is sufficiently rapid to adjust the digestion conditions. There is no need for quantitation because the identification is based on molecular weight differences. Sensitivity in the low picomole range is obtainable. The digestion of a number of peptides (900-3500 Da) with carboxypeptidase Y and MII has been monitored. It was found that successive use of the enzymes or use of a mixture of the enzymes was often advantageous. The sequence of up to 10 residues from the C-terminus has been determined for the peptides studied.