Population genetic structure of three species in the genus Astrocaryum G. Mey. (Arecaceae)

We assessed the level and distribution of genetic diversity in three species of the economically important palm genus Astrocaryum located in Pará State, in northern Brazil. Samples were collected in three municipalities for Astrocaryum aculeatum: Belterra, Santarém, and Terra Santa; and in two municipalities for both A. murumuru: Belém and Santo Antônio do Tauá and A. paramaca: Belém and Ananindeua. Eight microsatellite loci amplified well and were used for genetic analysis. The mean number of alleles per locus for A. aculeatum, A. murumuru, and A. paramaca were 2.33, 2.38, and 2.06, respectively. Genetic diversity was similar for the three species, ranging from H_E = 0.222 in A. aculeatum to H_E = 0.254 in A. murumuru. Both F_ST and AMOVA showed that most of the genetic variation was found within populations for all three species, but high genetic differentiation among populations was found for A. aculeatum. Three loci were not in Hardy-Weinberg equilibrium, with populations of A. paramaca showing a tendency for the excess of heterozygotes (F_IS = -0.144). Gene flow was high for populations of A. paramaca (N_m = 19.35). Our results suggest that the genetic diversity within populations followed the genetic differentiation among populations due to high gene flow among the population. Greater geographic distances among the three collection sites for A. aculeatum likely hampered gene flow for this species.

Microsporogenesis analysis validates the use of artificially tetraploidized Brachiaria ruziziensis in breeding programs

The genus Brachiaria contains species that have great economic importance in the Brazilian agricultural sector, as they enable cattle ranching on acid and poor soils with species that are resistant to spittlebugs and form crop-livestock-forest integration systems. The genus mainly consists of tetraploid (2n = 4x = 36) and apomictic species such as B. decumbens and B. brizantha. Sexuality is found in diploid species (2n = 2x = 18) such as B. ruziziensis. Interspecific hybridization between species of interest is possible by the artificial tetraploidization of B. ruziziensis and the subsequent hybridization with genotypes of B. brizantha and B. decumbens. Therefore, tetraploidized plants have to have normal meiosis or low rates of irregularities, as well as produce viable pollen grains. The objective of this study was to compare meiosis and pollen grain viability and morphology in artificially tetraploidized B. ruziziensis with that of descendants generated from crossing and selfing. The frequency of meiotic abnormalities ranged from 4.43 to 11%, and pollen viability ranged from 61 to 85%. Abnormalities were detected from prophase I to the tetrad stage with a variable frequency between the genotypes. The meiotic behavior of the artificially tetraploidized plants was little affected, and the pollen viability of the genotypes was high. Regarding pollen grain ultrastructure, there were no variations or morphological changes in the different genotypes. The genotypes have meiotic stability and high pollen viability, and can be incorporated into Brachiaria breeding programs.

Implications of mitotic and meiotic irregularities in common beans (Phaseolus vulgaris L.)

The common bean has great social and economic importance in Brazil and is the subject of a high number of publications, especially in the fields of genetics and breeding. Breeding programs aim to increase grain yield; however, mitosis and meiosis represent under explored research areas that have a direct impact on grain yield. Therefore, the study of cell division could be another tool available to bean geneticists and breeders. The aim of this study was to investigate irregularities occurring during the cell cycle and meiosis in common bean. The common bean cultivar used was BRSMG Talismã, which owing to its high yield and grain quality is recommended for cultivation in Brazil. We classified the interphase nuclei, estimated the mitotic and meiotic index, grain pollen viability, and percentage of abnormalities in both processes. The mitotic index was 4.1%, the interphase nucleus was non-reticulated, and 19% of dividing somatic cells showed abnormal behavior. Meiosis also presented irregularities resulting in a meiotic index of 44.6%. Viability of pollen grains was 94.3%. These results indicate that the common bean cultivar BRSMG Talismã possesses repair mechanisms that compensate for changes by producing a large number of pollen grains. Another important strategy adopted by bean plants to ensure stability is the elimination of abnormal cells by apoptosis. As the common bean cultivar BRSMG Talismã is recommended for cultivation because of its good agronomic performance, it can be concluded that mitotic and meiotic irregularities have no negative influence on its grain quality and yield.

Genotoxicity of SPL (spent pot lining) as measured by Tradescantia bioassays

Spent Pot Liner (SPL) is a solid waste product generated in the process of aluminum production. Tradescantia micronuclei (Trad-MN) and stamen hair mutation (Trad-SHM) bioassays are very useful tests to assess genotoxicity of environmental pollutants. In the present study, we intended to investigate the genotoxicity of this waste with Tradescantia bioassays using leachates of SPL simulating the natural leachability of SPL in soil. The formation of micronuclei (MN) was found to be concentration dependent. MN frequency enhanced significantly with SPL treatment. In addition, SPL also appeared to increase the percentage of dyads and triads. Trad-SHM assay showed that SPL increases pink mutation events as SPL concentration increases. These results demonstrated that SPL is a cytogenotoxic agent that affects different genetic end-points (induction of micronuclei and point mutations) even at low concentration (2% and 3%).

Spent Pot Liner (SPL) induced DNA damage and nuclear alterations in root tip cells of Allium cepa as a consequence of programmed cell death

There are various toxic effects of environmental pollutants, including apoptosis and carcinogenesis. Spent Pot Liner (SPL) is solid waste from the aluminum industry. It has a highly variable composition, including cyanide, fluoride, organics and metals. Preliminary characterizations of the effect of SPL on Allium cepa show the presence of condensed nuclei. Thus, the aim of this study was to analyze the toxic effect of SPL in A. cepa root meristem in the context of programmed cell death (PCD). A lot of specific features of this process such as DNA fragmentation, condensed chromatin, spherical nuclei and the formation of apoptotic-like bodies were observed in root meristem after SPL treatment. Root meristem treated with SPL 25% solution exhibited an alteration in antioxidant enzyme activities; a reduction in NCR as a consequence of high percentage of condensed nuclei; DNA fragmentation, detected by electrophoresis and TUNEL assay; cytoplasm vacuolization and also a disturbance in root morphology. These features are associated with programmed cell death (PCD) under abiotic stress. Therefore, these data show that SPL induces apoptosis-like PCD in root meristem cells of A. cepa.

The effect of cyanide compounds, fluorides, aluminum, and inorganic oxides present in spent pot liner on germination and root tip cells of Lactuca sativa

SPL (spent pot liner) is a solid waste produced by the aluminum industry. This waste has a highly variable composition, consisting of cyanides, fluorides, organics, and metals. The aim of this work was to study the effect of SPL on root tips of Lactuca sativa using current plant bioassays. We observed a decrease in the germination rate with increasing concentrations of SPL. In addition, SPL was found to reduce root growth, which is correlated with a decrease in the mitotic index. Nevertheless, we noticed a significant enhancement in the percentage of stickiness, c-metaphase, anaphase bridges, and laggard chromosomes in dividing cells and also an increase in the number of cells with condensed nuclei. Moreover, SPL was found to alter the root tip surface, resulting in a reduction in the amount of root hair. These results demonstrate that SPL is a toxic agent that leads to cell damage and disturbance.

Cytogenetic alterations induced by SPL (spent potliners) in meristematic cells of plant bioassays

Spent potliners (SPL) is solid waste generated by the aluminum industry during the manufacture of aluminum metal. Information on the cytotoxicity effect of SPL is necessary to facilitate understanding of their action on organisms and to subsidize environmentally correct solutions. Thus, the aim of the present investigation is to compare the effect of SPL on meristematic cells of Allium cepa and Zea mays and also to discuss the mechanisms of SPL cytotoxicity involved. A strong inhibition on root growth in higher SPL concentrations has been observed in both A. cepa and Z. mays. For cytogenetic analysis, the results showed a reduction of mitotic index and increase of different abnormalities as the SPL concentration increased. We observed bridges, chromosome fragments, stickiness, multipolar anaphase, later segregation and cell death. In general, it was possible to observe an increase of different abnormalities as the SPL concentration increased. It is obvious from the results of the present investigation that SPL is cytotoxic on meristematic cells of plant tests (A. cepa and Z. mays).

Karyotypic studies of Cratylia argentea (Desv.) O. Kuntze and C. mollis Mart. ex Benth. (Fabaceae - Papilionoideae)

Cratylia argentea and C. mollis (Fabaceae-Papilionoideae) are legume shrubs native to the Cerrado and Caatinga, respectively. Both species show great resistance to drought and high nutritive value, which makes them a valuable forage resource in tropical regions. Cytogenetic studies were carried out on accessions of C. argentea and C. mollis from Germplasm Banks of Embrapa Gado de Leite (Juiz de Fora, MG) and Embrapa Semi-Arido (Petrolina, PE), respectively. Root tips were treated with 3 mM 8-hydroxyquinoline and slides were made using the air-dry technique. Karyotype description for each accession took into account the following features: chromosome number; total length, relative length and arm ratio of each chromosome; haploid set length, and degree of asymmetry. Mitotic metaphases in both species showed 2n = 22 chromosomes, where this is the first report of diploid number for C. mollis. Chromosome length was also quite similar for the two species, ranging from 5.08 to 2.50 microm in C. argentea and 5.12 to 2.51 microm in C. mollis, with haploid sets of equal size, measuring 38.10 and 37.85 microm, respectively. However, they did not show the same karyotypic formula, which was 5 m + 4 sm + 2 st for C. argentea and 7 m + 2 sm + 2 st for C. mollis. This indicates the occurrence of rearrangements within chromosomes I and VI. Both karyotypes showed a tendency for asymmetry.