The Effect of Oxygen Transport Resistances on the Viability and Functions of Isolated Rat Hepatocytes

The treatment of fulminant hepatic failure with a bioartificial liver support device relies on the possibility of replacing the detoxification and synthetic functions of the injured liver for as long as needed for patient recovery. In spite of progress in cell culture techniques, the effective use of isolated hepatocytes in liver support devices is currently hampered by a lack of information on the metabolic factors limiting long term hepatocyte culture. In this paper, we report our investigation on the effects of oxygen transport resistances on the viability and functions of isolated rat hepatocytes cultured on collagen coated Petri dishes. Detoxification and synthetic functions of the hepatocytes were studied with respect to ammonia and phenolsulphonphthalein elimination and urea synthesis. Lower resistances to oxygen transport favored hepatocyte survival. The isolated hepatocytes synthesized urea at rates that decreased as the resistance to oxygen transport increased. The rate at which urea was synthesized also decreased during the culture. Neither PSP, nor ammonia elimination rate was greatly affected by increasing oxygen transport resistances and remained rather constant up to a week of culture.

Importance of the Kinetic Characterization of Liver Cell Metabolic Reactions to the Design of Hybrid Liver Support Devices

Hybrid liver support devices (HLSDs) developed for the treatment of fulminant hepatic failure often perform well on a laboratory scale but rapidly lose their metabolic functions, or are not therapeutically effective, on a clinical scale. This suggests that the procedures adopted so far for the design of HLSDs are susceptible to improvement. In this paper, we discuss how essential a reliable and thorough kinetic characterization of the liver cell metabolic reactions is to the design of a clinically effective membrane HLSD. The features of the bioreactors used for the kinetic characterization of liver cell reactions are presented and discussed on the basis of the multifactorial nature of such reactions. The relevance of kinetics to the design of a membrane HLSD is also discussed with respect to the effect of the kinetics of oxygen consumption on the performance of the device.

Diffusive and convective transport through hollow fiber membranes for liver cell culture

For an efficient membrane bioreactor design, transport phenomena determining the overall mass flux of metabolites, catabolites, cell regulatory factors, and immune-related soluble factors, need to be clarified both experimentally and theoretically. In this work, experiments and calculations aimed at discerning the simultaneous influence of both diffusive and convective mechanisms to the transport of metabolites. In particular, the transmembrane mass flux of glucose, bovine serum albumin (BSA), APO-transferrin, immunoglobulin G, and ammonia was experimentally measured, under pressure and concentration gradients, through high-flux microporous hydrophilic poly-ether-sulphone (PES-HFMs) and poly-sulphone hollow fiber membranes (PS-HFMs). These data were analyzed by means of a model based on the mechanism of capillary pore diffusion, assuming that solute spherical molecules pass through an array of solvent-filled cylindrical pores with a diffusive permeation corrected for friction and steric hindrances. Additionally, resistances to the mass transfer were taken into account. Convective permeation data were discussed in terms of morphological properties of the polymeric membranes, molecular Stokes radius, and solute-membrane interactions according to information given by contact angle measurements. The observed steady-state hydraulic permeance of PS-HFMs was 0.972 L/m2hmbar, about 15.6-fold lower than that measured for PES-HFMs (15.2 L/m2h); in general, PS-HFMs provided a significant hindrance to the transport of target species. Diffusion coefficients of metabolites were found to be similar to the corresponding values in water through PES-HFMs, but significantly reduced through PS-HFMs (D(Glucose)(Membrane)=2.8x10(-6)+/-0.6x10(-6)cm2/s, D(BSA)(Membrane)=6.4 x 10(-7)+/-1 x 10(-7)cm(/s, D(Apotransferrin)(Membrane)=2.3 x 10(-7)+/-0.25 x 10(-7)cm2/s).

New modified polyetheretherketone membrane for liver cell culture in biohybrid systems: adhesion and specific functions of isolated hepatocytes

There has been growing interest in innovative materials with physico-chemical properties that provide improved blood/cell compatibility. We propose new polymeric membranes made of modified polyetheretherketone (PEEK-WC) as materials with potential for use in biohybrid devices. PEEK-WC exhibits high chemical, thermal stability and mechanical resistance. Owing to its lack of crystallinity this polymer can be used for preparing membranes with cheap and flexible methods. We compared the properties of PEEK-WC membranes to polyurethane membranes prepared using the same phase inverse technique and commercial membranes. The physico-chemical properties of the membranes were characterised by contact angle measurements. The different parameters acid (gamma+), base (gamma-) and Lifshitz-van der Waals (gammaLW) of the surface free energy were calculated according to Good-van Oss's model. We evaluated the cytocompatibility of PEEK-WC membranes by culturing hepatocytes isolated from rat liver. Cell adhesion and metabolic behaviour in terms of ammonia elimination, urea synthesis and protein synthesis were evaluated during the first days of culture. Liver cells adhered and formed three-dimensional aggregates on the most tested membranes. PEEK-WC membranes promoted hepatocyte adhesion most effectively. Urea synthesis, ammonia elimination and protein synthesis improved significantly when cells adhered to PEEK-WC membrane. The considerable metabolic activities of cells cultured on this membrane confirmed the good structural and physico-chemical properties of the PEEK-WC membrane that could be a promising biomaterial for cell culture in biohybrid devices.

Novel PEEK-WC membranes with low plasma protein affinity related to surface free energy parameters

There has been growing interest in innovative materials with specific physico-chemical properties that provide an improved blood/cell compatibility. In this paper we evaluated the performance of new membranes prepared from a modified polyetheretherketone (PEEK-WC) contacting human plasma proteins. These membranes were prepared by using the phase inversion technique. Membrane wettability and affinity to proteins were evaluated by means of contact angle experiments, roughness measurements, and quantitative UV analysis. The energy parameters of membrane surfaces were determined according to Good, van Oss and Chaudhury's theory. The extent of human albumin, fibrinogen and immunoglobulin G adsorption was related to quantitative expressions of the membrane surface hydrophilicity: the base parameter of surface free energy and the free energy of interfacial interaction. The performance of PEEK-WC membranes was compared to that of commercial membranes, which conventionally are used in biomedical applications. The experimental results showed a reduction of protein adsorption on PEEK-WC membranes with respect to other commercial membranes. The low protein affinity of PEEK-WC membranes is due to the intrinsic physico-chemical characteristics of the polymeric material which makes these membranes interesting for potential use in biomedical applications.

Review of a flat membrane bioreactor as a bioartificial liver

Recent developments in tissue engineering permit to use isolated hepatocytes in a bioreactor for the creation of a bioartificial liver which supports patients suffering from acute liver failure. In this study, the authors discuss the development of a flat membrane bioreactor using pig hepatocytes for the replacement of liver functions. The flat membrane bioreactor permits a high-density hepatocyte culture under sufficient oxygenation conditions, comparable to an in vivo microenvironment. In this bioreactor, built according to the in vivo organisation of the liver, pig hepatocytes are cultured with non-parenchymal cells within an extracellular matrix between oxygen-permeable flat-sheet membranes as individual plates. The performance of the "scale-up bioreactor" was tested in vitro for 18 days in static and flux conditions. Pig hepatocytes in the bioreactor were maintained in three-dimensional co-culture with non-parenchymal cells and are reorganised in a way similar to the liver cell plates in vivo: cells remained polarised in vitro clearly demonstrating biliary zones surrounding individual hepatocytes. The biochemical performance of the bioreactor was assessed by estimating its ability to remove two of the major toxins associated with hepatic encephalopathy: benzodiazepines and ammonia. The rates of ammonia elimination and drug biotransformation were maintained at constant high levels for almost two weeks. This "scaled-up bioreactor" provides conditions favourable for the formation of contiguous cell sheets, which allow to maintain constant liver specific functions.

The influence of polymeric membrane surface free energy on cell metabolic functions

In membrane bioartificial organs using isolated cells, polymeric semipermeable membranes are used as immunoselective barriers, means for cell oxygenation and also as substrata for adhesion of anchorage-dependent cells. The selection of cytocompatible membranes that promote in vitro cell adhesion and function could be dependent on its membrane properties. In this study we investigated the physicochemical aspects of the interaction between the membrane and mammalian cells in order to provide guidelines to the selection of cytocompatible membranes. We evaluated the metabolic behavior of isolated liver cells cultured on various polymeric membranes such as the ones modified by protein adsorption. The physico-chemical properties of the membranes were characterized by contact angle measurements. The surface free energy of membranes and their different parameters acid (gamma+), base (gamma-) and Lifshitz-van der Waals (gammaLW) were calculated according to Good-van Oss's model. The adsorption of protein modified markedly both contact angle and membrane surface tension. In particular, membrane surface free energy decreased drastically with increased water contact angle. For each investigated membrane we observed that liver specific functions of cells improve on hydrophilic membrane surfaces. For all investigated membranes the rate of ammonia elimination increased with increasing of membrane surface free energy.

Morphology and metabolism of hepatocytes cultured in Petri dishes on films and in non-woven fabrics of hyaluronic acid esters

Polymers of hyaluronic acid (Hyal) esters exhibit good tissue compatibility and are available in various geometrical configurations. These properties can be exploited for the design of innovative bioartificial liver support devices (BALSDs) using primary hepatocytes. In this paper, we report a preliminary investigation of the polymer feasibility of the ethyl and the benzyl Hyal ester in the form of films and non-woven fabrics for the in vitro culture of primary rat hepatocytes. Cell function was evaluated daily in Petri dishes with respect to the rate of ammonia elimination (AER) and urea synthesis (USR). Cells cultured in non-woven fabrics of the ethyl ester of Hyal (HYAFF7nw) exhibited an initial AER about 32% lower and synthesised urea 33% faster than that of cells on collagen films. After a week in culture, cells on collagen films retained only a minor fraction of their initial rates. Cells cultured in non-woven fabrics of HYAFF7nw retained about 62 and 44% of their initial AER and USR, respectively, and exhibited an AER approximately equal to and a USR 3.6 times greater than those of cells adherent to collagen. These results suggest that non-woven fabrics of HYAFF7nw are promising substrata for hepatocyte culture in BALSDs.

High level benzodiazepine and ammonia clearance by flat membrane bioreactors with porcine liver cells

The onset of hepatic encephalopathy is a multifactorial process in which endogenous benzodiazepines and hyperammonemia play a pivotal role. The treatment of comatose states in liver failure is one of the major functions of a bioartificial liver. A controlled study demonstrating the capacity of a large scale bioartificial liver to detoxify benzodiazepines could be a crucial prerequisite to break this circle of events leading to coma. The aim of this study was therefore to expose the bioreactor to high levels of benzodiazepines and ammonia for evaluation of its detoxifying capacity. We have developed a novel and unique device reconstructing the plate architecture of the liver. Porcine hepatocytes were co-cultured with non-parenchymal cells. We investigated benzodiazepine metabolism using diazepam as model drug. The bioreactor was also loaded with high levels of ammonia and ammonia clearance as well as urea secretion with ammonia challenge were investigated. Albumin secretion was analysed in parallel as a control viability and tissue specific secretory parameter. The results clearly show that the velocity of diazepam turnover increases between day 1 and 2 and stabilises at high levels. Typical diazepam metabolites including temazepam, N-desmethyl-diazepam and oxazepam were generated. Cell specific functions, including albumin secretion, were comparable to an in vivo liver. We conclude that the flat membrane bioreactor used as bioartificial liver has the potential to detoxify diazepam and ammonia at significant amounts. Maintenance of monoxygenase activities in vitro is one of the strongholds of the bioreactor concept presented in this study.

A novel full-scale flat membrane bioreactor utilizing porcine hepatocytes: cell viability and tissue-specific functions

When designing an extracorporeal hybrid liver support device, special attention should be paid to providing the architectural basis for reconstructing a proper cellular microenvironment that ensures highest and prolonged functional activity of the liver cells. The common goal is to achieve high cell density culture and to design the bioreactor for full-scale primary liver cell cultures under adequate mass transfer conditions. An important aim of this study was to evaluate the biochemical performance of a flat membrane bioreactor that permits high-density hepatocyte culture and simultaneously to culture cells under sufficient oxygenation availability conditions comparable to the in vivo-like microenvironment. In such a bioreactor pig liver cells were cultured within an extracellular matrix between oxygen-permeable flat-sheet membranes. In this investigation we used a novel scaled-up prototype consisting of up to 20 modules in a parallel mode. Each module was seeded with 2 x 10(8) cells. Microscopic examination of the hepatocytes revealed morphological characteristics as found in vivo. Cell concentration increased in the first days of culture, as indicated by DNA measurements. The performance of the bioreactor was monitored for 18 days in terms of albumin synthesis, urea synthesis, ammonia elimination, and diazepam metabolism. The ability of the hepatocytes to synthesize albumin and urea increased during the first days of culture. Higher rates of albumin synthesis were obtained at day 9 and remained at a value of 1.41 pg/h/cell until day 18 of culture. The rate of urea synthesis increased from 23 ng/h/cell to 28 ng/h/cell and then remained constant. Cells eliminated ammonia at a rate of about 56 pg/h/cell, which was constant over the experimental period. Hepatocytes in the bioreactor metabolized diazepam and generated three different metabolites: nordiazepam, temazepam, and oxazepam. The production of such metabolites was sustained until 18 days of culture. These results demonstrated that the scale-up of the bioreactor was assessed, and it could be demonstrated that the device design aimed at the reconstruction of the liver-specific tissue architecture supported the expression of liver-specific functions of primary pig liver cells.

The effect of surface roughness of microporous membranes on the kinetics of oxygen consumption and ammonia elimination by adherent hepatocytes

In membrane hybrid liver support devices (HLSDs) using isolated hepatocytes where oxygen is transported only by diffusion to the cells, about 15-40% of the cell mass is likely to be in direct contact with the semipermeable membranes used as immunoselective barriers: quantitative effects of membrane surface properties on the kinetics of hepatocyte metabolic reactions may also affect HLSD performance. In this paper, we report our investigation of the effects of surface morphology of two microporous commercial membranes on the kinetics of oxygen consumption and ammonia elimination by primary hepatocytes in adhesion culture. Isolated rat hepatocytes were cultured on polypropylene microporous membranes with different surface roughness and pore size in a continuous-flow bioreactor whose fluid dynamics was optimized for the kinetic characterization of liver cell metabolic reactions. Collagen-coated membranes were used as the reference substratum. Hepatocyte adhesion was not significantly affected by membrane surface morphology. The rates of the investigated reactions increased with ammonia concentration according to saturation kinetics: the values of kinetic parameters Vmax and K(M) increased as cells were cultured on the membrane with the greatest membrane surface roughness and pore size. For the reaction of oxygen consumption, Vmax increased from 0.066 to 0.1 pmol h(-1) per cell as surface roughness increased from 70 to 370 nm. For the kinetics of ammonia elimination. K(M) increased from 0.23 to 0.32 mM and Vmax increased from 1.49 to 1.79 pmol h(-1) per cell with membrane surface roughness increasing from 70 to 370 nm. Cells cultured on collagen-coated membranes consistently yielded the highest reaction rates. The Vmax values of 0.18 and 2.84 pmol h(-1) per cell for oxygen consumption and ammonia elimination, respectively, suggest that cell functions are also affected by the chemical nature of the substratum.

Enhanced oxygen delivery reverses anaerobic metabolic states in prolonged sandwich rat hepatocyte culture

It must be assumed that current petri dish primary hepatocyte culture models do not supply sufficient amounts of oxygen and thus cause anaerobic metabolism of the cells. This is contrary to the physiologic state of the cells. In vivo the liver is a highly vascularized organ with a rather high blood flow rate of a mixture of arterial and venous blood. The aim of the present study was to show the oxygen dependence of primary rat hepatocytes in long-term culture and to define appropriate conditions that could allow hepatocytes to maintain tissue specific functions in an aerobic environment. To this purpose matrix overlaid hepatocytes were either cultured on gas-permeable (fluorinated hydrocarbon films) or gas-impermeable (polystyrene) supports at 10% and 20% ambient oxygen concentration (v/v), respectively. Tissue-specific functions were assessed by studying albumin and urea secretion as well as xenobiotic metabolism. The mRNA expression and catalytic activities of the cytoprotective antioxidant enzymes mitochondrial manganese superoxide dismutase (MnSOD), cytosolic copper and zinc superoxide dismutase, peroxisomal catalase, and cytosolic glutathione peroxidase were investigated to assess intracellular responses to the defined variations in oxygen supply. Hepatocytes could successfully be maintained at aerobic conditions in long-term culture on gas-permeable PTFE films. At 50% (10%, v/v) of currently used oxygen levels lactate accumulation was prevented, a plateau-like albumin secretion reestablished, urea secretion improved, and xenobiotic metabolism proceeded at physiological rates. mRNA expression of cytoprotective enzymes responded to the pericellular availability of oxygen and was most pronounced in the case of MnSOD. However, the biggest stress factor for the hepatocytes still appeared to be the isolation procedure, as mRNA expression and catalytic activities were most elevated shortly thereafter. In conclusion, this study clearly shows the oxygen dependence of primary rat hepatocytes in long-term culture and indicates means to establish appropriate conditions for the aerobic culture of primary rat sandwich hepatocytes with full maintenance of function. The long-term culture of hepatocytes on oxygenating supports at in vivo-like oxygen tensions therefore appears to be more physiologic and beneficial for the cells.

Technique for the kinetic characterization of the metabolic reactions of hepatocytes in adhesion culture

In this paper, we report on the development of a technique for the kinetic characterization of the metabolic reactions of liver cells in adhesion culture. The technique is based on the use of a continuous-flow bioreactor which is designed and operated in such a way as to ensure a uniform distribution of metabolite at the cell site: hence, the metabolite concentration at the surface of cells cultured in adhesion at the bottom of the bioreactor equals that in the stream leaving the bioreactor. Under steady conditions, the rate of a given cell reaction is directly estimated from the metabolite concentration difference in the streams entering and leaving the bioreactor and can be correctly related to the actual concentration at the cell surface. Such a technique was used for a preliminary investigation of the kinetics of ammonia elimination, urea synthesis, and phenolsulfonphthalein (PSP) elimination by primary rat hepatocytes cultured in adhesion on collagen, with respect to ammonia and PSP concentration, respectively. The rate at which the hepatocytes eliminated ammonia increased with increasing ammonia concentrations according to a Michaelis-Menten kinetics. The hepatocytes synthesized urea also in the absence of ammonia in the medium: as ammonia concentration increased, the cells synthesized urea at a rate that increased according to a saturation kinetics. In the concentration range investigated, the hepatocytes eliminated PSP at a rate that increased linearly with the actual PSP concentration in the medium. Such kinetic information can be coupled to the mechanism of metabolite transport in a hybrid liver support device to yield an effective device design for the treatment of acute liver failure.

Importance of the kinetic characterization of liver cell metabolic reactions to the design of hybrid liver support devices

Hybrid liver support devices (HLSDs) developed for the treatment of fulminant hepatic failure often perform well on a laboratory scale but rapidly lose their metabolic functions, or are not therapeutically effective, on a clinical scale. This suggests that the procedures adopted so far for the design of HLSDs are susceptible to improvement. In this paper, we discuss how essential a reliable and thorough kinetic characterization of the liver cell metabolic reactions is to the design of a clinically effective membrane HLSD. The features of the bioreactors used for the kinetic characterization of liver cell reactions are presented and discussed on the basis of the multifactorial nature of such reactions. The relevance of kinetics to the design of a membrane HLSD is also discussed with respect to the effect of the kinetics of oxygen consumption on the performance of the device.

The effect of catabolite concentration on the viability and functions of isolated rat hepatocytes

The treatment of patients with hepatic failure by means of hybrid liver support devices using primary xenogeneic hepatocytes is currently hindered by the rapid loss of cell metabolic functions. Similarly to what happens with other mammalian cells, accumulation of catabolites in the neighborhood of cultured hepatocytes might significantly affect their viability and functions. In this paper, we investigated the effects of high concentrations of catabolites, such as ammonia and lactic acid, on the viability and functions of rat hepatocytes cultured on collagen coated Petri dishes. The effects on hepatocyte functions were established with respect to their ability to synthesize urea and to eliminate ammonia. Indeed, high catabolite concentrations effected both hepatocyte viability and functions. The number of viable hepatocytes decreased with increasing ammonia concentrations in the culture medium. High ammonia concentrations had also both an inhibitory and a toxic effect on hepatocyte functions. In fact, the hepatocytes synthesized urea and eliminated ammonia at rates that decreased with increasing ammonia concentrations. Similarly, high lactic acid concentrations were toxic to the cells and also inhibited their synthetic functions.

Polymeric membranes for hybrid liver support devices: the effect of membrane surface wettability on hepatocyte viability and functions

Extracorporeal therapies based on membrane hybrid liver support devices using primary hepatocytes are an interesting approach to the treatment of acute hepatic failure. In such devices, semipermeable polymeric membranes are effectively used as immunoselective barriers between a patient's blood and the xenocytes in order to prevent the immune rejection of the graft. The membranes may act also as the substratum for cell adhesion, thus favouring the viability and functions of anchorage-dependent cells such as the hepatocytes. Membrane cytocompatibility is expected to depend on the surface properties of the polymer, such as its morphology and its physico-chemical properties. In this paper, we report our investigation on the effect of the surface wettability of membranes on hepatocyte viability and functions. Polypropylene microporous membranes were modified to increase their surface wettability and were used as substrata for rat hepatocyte adhesion culture. Isolated hepatocytes were also cultured on collagen as a reference substratum. Hepatocyte viability generally improved as the cells were cultured on more wettable membranes. In agreement with the viability data, the increasing wettability of the membrane surface also improved some metabolic functions.

The effect of oxygen transport resistances on the viability and functions of isolated rat hepatocytes

The treatment of fulminant hepatic failure with a bioartificial liver support device relies on the possibility of replacing the detoxification and synthetic functions of the injured liver for as long as needed for patient recovery. In spite of progress in cell culture techniques, the effective use of isolated hepatocytes in liver support devices is currently hampered by a lack of information on the metabolic factors limiting long term hepatocyte culture. In this paper, we report our investigation on the effects of oxygen transport resistances on the viability and functions of isolated rat hepatocytes cultured on collagen coated Petri dishes. Detoxification and synthetic functions of the hepatocytes were studied with respect to ammonia and phenolsulphonphthalein elimination and urea synthesis. Lower resistances to oxygen transport favored hepatocyte survival. The isolated hepatocytes synthesized urea at rates that decreased as the resistance to oxygen transport increased. The rate at which urea was synthesized also decreased during the culture. Neither PSP, nor ammonia elimination rate was greatly affected by increasing oxygen transport resistances and remained rather constant up to a week of culture.