Evaluation of silicone-based wristbands as passive sampling systems using PAHs as an exposure proxy for carcinogen monitoring in firefighters: Evidence from the firefighter cancer initiative

Compared to the general population, firefighters are known to sustain greater levels of exposure to hazardous compounds, despite their personal protective equipment, also known as turnout gear. Among the most significant toxins that firefighters are chronically exposed to are polycyclic aromatic hydrocarbons (PAHs). Additionally, firefighters have also been noted to exhibit an increased incidence of certain types of cancer. Considering a probable link between exposure to PAHs and increased rates of cancer in the fire service, we aim to document ambient chemical concentrations in the firefighter work environment. Our strategy involves the use of silicone-based wristbands that have the capacity to passively sorb PAHs. To determine if wristbands can serve as an effective chemical monitoring device for the fire service, silicone wristbands were pilot-tested as personal sampling devices for work environment risk monitoring in active-duty firefighters. Recovered wristbands underwent multiple extraction steps, followed by GC-MS analysis to demonstrate their efficacy in monitoring PAHs in the firefighter environment. Initial findings from all wristband samples taken from firefighters showed multiple exposures to various PAHs of concern for the health of the firefighters when in a fire environment. In addition to PAH monitoring, we examined known and potential sources of PAH contamination in their work environment. To that end, profiles of elevated PAH concentrations were documented at various fire stations throughout South Florida, for individual firefighters both during station duties and active fire response.

Bioluminescence inhibition assay for the detection of hydroxylated polychlorinated biphenyls

Hydroxylated polychlorinated biphenyls (OH-PCBs) are an important class of contaminants that mainly originate from polychlorinated biphenyl metabolism. They may conceivably be as dangerous and persistent as the parent compounds; most prominently, OH-PCBs are endocrine disruptors. Due to increasing evidence of the presence of OH-PCBs in the environment and in living organisms, including humans, and of their toxicity, methods of detection for OH-PCBs are needed in the environmental and medical fields. Herein, we describe the development and optimization of a protein-based inhibition assay for the quantification of OH-PCBs. Specifically, the photoprotein aequorin was utilized for the detection of OH-PCBs. We hypothesized that OH-PCBs interact with aequorin, and we established that OH-PCBs actually inhibit the bioluminescence of aequorin in a dose-dependent manner. We took advantage of this phenomenon to develop an assay that is capable of detecting a wide variety of OH-PCBs with a range of detection limits, the best detection limit being 11 nM for the compound 2-hydroxy-2',3,4',5',6-pentachorobiphenyl. The viability of this system for the screening of OH-PCBs in spiked biological and environmental samples was also established. We envision the implementation of this novel bioluminescence inhibition assay as a rapid, sensitive, and cost-effective method for monitoring OH-PCBs. Furthermore, to the best of our knowledge, this is the first time aequorin has been employed to detect an analyte by the inhibition of its bioluminescence reaction. Hence, this strategy may prove to be a general approach for the development of a new generation of protein-based inhibition assays.

Reactive nanostructured membranes for water purification

Many current treatments for the reclamation of contaminated water sources are chemical-intensive, energy-intensive, and/or require posttreatment due to unwanted by-product formation. We demonstrate that through the integration of nanostructured materials, enzymatic catalysis, and iron-catalyzed free radical reactions within pore-functionalized synthetic membrane platforms, we are able to conduct environmentally important oxidative reactions for toxic organic degradation and detoxification from water without the addition of expensive or harmful chemicals. In contrast to conventional, passive membrane technologies, our approach utilizes two independently controlled, nanostructured membranes in a stacked configuration for the generation of the necessary oxidants. These include biocatalytic and organic/inorganic (polymer/iron) nanocomposite membranes. The bioactive (top) membrane contains an electrostatically immobilized enzyme for the catalytic production of one of the main reactants, hydrogen peroxide (H(2)O(2)), from glucose. The bottom membrane contains either immobilized iron ions or ferrihydrite/iron oxide nanoparticles for the decomposition of hydrogen peroxide to form powerful free radical oxidants. By permeating (at low pressure) a solution containing a model organic contaminant, such as trichlorophenol, with glucose in oxygen-saturated water through the membrane stack, significant contaminant degradation was realized. To illustrate the effectiveness of this membrane platform in real-world applications, membrane-immobilized ferrihydrite/iron oxide nanoparticles were reacted with hydrogen peroxide to form free radicals for the degradation of a chlorinated organic contaminant in actual groundwater. Although we establish the development of these nanostructured materials for environmental applications, the practical and methodological advances demonstrated here permit the extension of their use to applications including disinfection and/or virus inactivation.

Aqueous - Phase Synthesis of PAA in PVDF Membrane Pores for Nanoparticle Synthesis and Dichlorobiphenyl Degradation

This paper deals with bimetallic (Fe/Pd) nanoparticle synthesis inside the membrane pores and application for catalytic dechlorination of toxic organic compounds form aqueous streams. Membranes have been used as platforms for nanoparticle synthesis in order to reduce the agglomeration, encountered in solution phase synthesis which leads to a dramatic loss of reactivity. The membrane support, polyvinylidene fluoride (PVDF) was modified by in situ polymerization of acrylic acid in aqueous phase. Subsequent steps included ion exchange with Fe(2+), reduction to Fe(0) with sodium borohydride and Pd deposition. Various techniques, such as STEM, EDX, FTIR and permeability measurements, were used for membrane characterization and showed that bimetallic (Fe/Pd) nanoparticles with an average size of 20-30 nm have been incorporated inside of the PAA-coated membrane pores. The Fe/Pd-modified membranes showed a high reactivity toward a model compound, 2, 2'-dichlorobyphenyl and a strong dependence of degradation on Pd (hydrogenation catalyst) content. The use of convective flow substantially reduces the degradation time: 43% conversion of dichlorobiphenyl to biphenyl can be achieved in less than 40 s residence time. Another important aspect is the ability to regenerate and reuse the Fe/Pd bimetallic systems by washing with a solution of sodium borohydride, because the iron becomes inactivated (corroded) as the dechlorination reaction proceeds.

Degradation of Trichloroethylene and Dichlorobiphenyls by Iron-Based Bimetallic Nanoparticles

Bimetallic nanoparticles of Ni/Fe and Pd/Fe were used to study the degradation of trichloroethylene (TCE) at room temperature. The activity for different iron-based nanoparticles with nickel as the catalytic dopant was analyzed using iron mass-normalized hydrogen generation rate. Degradation kinetics in terms of surface area-normalized rate constant was observed to have a strong correlation with the hydrogen generated by iron oxidation. A sorption study was conducted, and a mathematical model was derived that incorporates the reaction and Langmuirian-type sorption terms to estimate the intrinsic rate constant and rate-limiting step in the degradation process, assuming negligible mass transfer resistance of TCE to the solid particles phase. A longevity study through repeated cycle experiments was conducted to analyze the effect of activity loss on the reaction mechanistic pathway, and the results showed that the attenuation in the nanoparticles activity did not adversely affect the reaction mechanisms in generating gaseous products such as ethylene and ethane.

Chelate-Modified Fenton Reaction for the Degradation of Trichloroethylene in Aqueous and Two-Phase Systems

The primary objective of this research was to model and understand the chelate-modified Fenton reaction for the destruction of trichloroethylene (TCE) present in both the aqueous and organic (in the form of droplets) phases. The addition of a nontoxic chelate (L), such as citrate or gluconic acid, allows for operation at near-neutral pH and controlled release of Fe(II)/Fe(III). For the standard Fenton reaction at low pH in two-phase systems, an optimum H(2)O(2):Fe(II) molar ratio was found to be between 1:1 and 2:1. Experimentation proved the chelate-modified Fenton reaction effectively dechlorinated TCE in both the aqueous and organic phases at pH 6-7 using low H(2)O(2):Fe(II) molar ratios (4:1 to 8:1). Increasing the L:Fe ratio was found to decrease the rate of H(2)O(2) degradation in both Fe(II) and Fe(III) systems at near-neutral pH. Generalized models were developed to predict the concentration of TCE in the aqueous phase and TCE droplet radius as a function of time using literature-reported hydroxyl radical reaction kinetics and mass transfer relationships. Additional aspects of this work include the reusability of the Fe-citrate complex under repeated H(2)O(2) injections in real water systems as well as packed column studies for simulated groundwater injection.

Iron-Functionalized Membranes for Nanoparticle Synthesis and Reactions

Membrane-based separation processes have been used extensively for drinking water purification, wastewater treatment, and numerous other applications. More recent developments in membrane functionalization have made the use of membrane science important in diverse fields, from tunable separations to catalysis. The focus of this work is to create a common membrane platform for the incorporation of technologies capable of degrading target pollutants. Functionalized membranes capable of metal capture were created using water-based and solvent-based acrylic acid polymerization to synthesize poly (acrylic acid) (PAA) within poly(vinylidene fluoride) (PVDF) membrane pores. The COO(-) groups of PAA were used to capture Fe(II), which was then either reduced and doped with Pd to form Fe/Pd nanoparticles or used as-is for free radical generation with hydrogen peroxide. Fe/Pd nanoparticles were synthesized within the pores of a PAA/PVDF membrane functionalized via aqueous (green) chemistry and used to dechlorinate trichloroethylene (TCE) and 2,2'-dichlorobiphenyl (DiCB). A PAA/PVDF membrane containing immobilized Fe(III) was used to obtain controlled free radical generation and target organic (pentachlorophenol) degradation within the membrane pore under convective flow conditions.

Coplanar polychlorinated biphenyl-induced CYP1A1 is regulated through caveolae signaling in vascular endothelial cells

Polychlorinated biphenyls (PCBs) are persistent environmental contaminants that can induce inflammatory processes in the vascular endothelium. We hypothesize that the plasma membrane microdomains called caveolae are critical in endothelial activation and toxicity induced by PCBs. Caveolae are particularly abundant in endothelial cells and play a major role in endothelial trafficking and the regulation of signaling pathways associated with the pathology of vascular diseases. We focused on the role of caveolae and their major protein component, caveolin-1 (Cav-1), on aryl hydrocarbon receptor (AhR)-mediated induction of cytochrome P450 1A1 (CYP1A1) by coplanar PCBs. Endothelial cell exposure to PCB77 increased both caveolin-1 and CYP1A1 levels in a time-dependent manner in total cell lysates, with a maximum increase at 6h. Furthermore, PCB77 accumulated mainly in the caveolae-rich fraction, as determined by gas chromatograph-mass spectrometry. Immunoprecipitation analysis revealed that PCB77 increased AhR binding to caveolin-1. Silencing of caveolin-1 significantly attenuated PCB77-mediated induction of CYP1A1 and oxidative stress. Similar effects were observed in caveolin-1 null mice treated with PCB77. These data suggest that caveolae may play a role in regulating vascular toxicity induced by persistent environmental pollutants such as coplanar PCBs. This may have implications in understanding mechanisms of inflammatory diseases induced by environmental pollutants.

Alumina nanoparticles induce expression of endothelial cell adhesion molecules

Nanotechnology is a rapidly growing industry that has elicited much concern because of the lack of available toxicity data. Exposure to ultrafine particles may be a risk for the development of vascular diseases due to dysfunction of the vascular endothelium. Increased endothelial adhesiveness is a critical first step in the development of vascular diseases, such as atherosclerosis. The hypothesis that alumina nanoparticles increase inflammatory markers of the endothelium, measured by the induction of adhesion molecules as well as the adhesion of monocytes to the endothelial monolayer, was tested. Following characterization of alumina nanoparticles by transmission electron microscopy (TEM), electron diffraction, and particle size distribution analysis, endothelial cells were exposed to alumina at various concentrations and times. Both porcine pulmonary artery endothelial cells and human umbilical vein endothelial cells showed increased mRNA and protein expression of VCAM-1, ICAM-1, and ELAM-1. Furthermore, human endothelial cells treated with alumina particles showed increased adhesion of activated monocytes. The alumina particles tended to agglomerate at physiological pH in serum-containing media, which led to a range of particle sizes from nano to micron size during treatment conditions. These data show that alumina nanoparticles can elicit a proinflammatory response and thus present a cardiovascular disease risk.

Hydroxylated polychlorinated biphenyl detection based on a genetically engineered bioluminescent whole-cell sensing system

The metabolites of polychlorinated biphenyls (PCBs), such as hydroxylated PCBs (OH-PCBs), have been identified as environmental contaminants. Various studies have shown that some OH-PCBs can potentially contribute to health problems. Detection of these compounds in environmental and biological samples could provide useful information about their levels and lead to a better understanding of their apparent toxicity. To that end, we have developed a whole-cell sensing system for the detection of OH-PCBs by taking advantage of the recognition of a group of related compounds, i.e., hydroxylated biphenyls, by the product of the hbpR gene in the hbp operon from Pseudomonas azelaica strain HBP1. By fusing the luxAB genes, encoding the reporter protein bacterial luciferase, to the hbp regulator-promoter sequence, a whole-cell sensing system was developed. Here, we describe the optimization and application of this whole-cell sensing system for the detection of a model compound, 2-hydroxy-3',4'-dichlorobiphenyl. A detection limit of 1 x 10(-8) M was achieved using this system. The detection of a broad range of individual OH-PCBs as well as an OH-PCB mixture was investigated. The system can detect OH-PCBs in whole serum samples in a trace amount, which is comparable to the detection of these analytes in medium alone. We envision that the method developed can potentially be employed as a rapid and sensitive way to monitor OH-PCBs for toxicological study in the laboratory, as well as a useful tool to evaluate the presence of bioavailable OH-PCBs in natural environments.