Signatures of van der Waals and Electrostatic Forces in the Deposition of Nanoparticle Assemblies

We evaporate aqueous suspensions in a microchamber to explore the connection between the morphology of the nanoparticle deposits at nanometer resolutions and at micrometer and hundreds of micrometers resolutions. Repulsive or weakly attractive electrical double-layer and van der Waals surface forces render the deposition of detached particles and small aggregates at nanometer resolutions. However, strongly attractive surface forces render the dense deposition of large aggregates. At greater length resolutions, the deposit morphology is further governed by evaporation-mediated transport of particles in the volatile suspension. We use experiment and theory to show that the contributions of the different mechanisms to the deposit morphology are mediated by particle coagulation and by particle adsorption to the substrate. The nanometer deposit morphology and particle transport render the morphology of the deposits at greater length resolutions, where it may take the shape of crude or smooth particulate micropatterns or continuous particulate coating layers.

Viscosity Peak due to Shape Transition from Wormlike to Disklike Micelles: Effect of Dodecanoic Acid

Here, we have investigated the synergistic growth of long wormlike micelles and their transformation into disklike micelles, which occurs in three-component solutions composed of sodium lauryl ether sulfate (SLES; anionic), cocamidopropyl betaine (CAPB; zwitterionic), and dodecanoic acid (HC12; nonionic). The solution rheology is characterized in terms of zero-shear viscosities and characteristic times for micellar breaking and reptation. Furthermore, the microstructure evolution, leading to the observed rheological behavior, is revealed by cryo-transmission electron microscopy (TEM) micrographs. In all cases, the CAPB-to-SLES ratio is fixed, whereas the fatty acid concentration is varied. At a certain HC12 concentration, the solution viscosity passes through a maximum. The cryo-TEM imaging indicates that wormlike micelles appear before the peak, grow further up to the peak, and finally transform into disklike aggregates (a very rare micellar structure) after the peak. The transformation of worms into disks leads to a drop in viscosity because the length-to-thickness aspect ratio of the disks is significantly lower than that of the worms. In this article, we elucidate the structure-rheology relations in micellar solutions that might be applied for the design of personal-care and household formulations.

Influence of a Propagating Megahertz Surface Acoustic Wave on the Pattern Deposition of Solute Mass off an Evaporating Solution

We study the influence of a megahertz Rayleigh surface acoustic wave (SAW), propagating in a solid substrate, on the pattern deposition of a solute mass off an evaporating solution. An experimental procedure, where a film of a solution undergoes a controlled evaporation in a chamber, shows that the SAW alters the state of the pattern deposition. Increasing the power of the SAW supports an increase in the density of the deposited patterns. Beyond threshold conditions, the deposited patterns merge and we observe the deposition of a solid film. A simplified theory suggests that the SAW deforms the geometry of the film, which is predominantly governed by the capillary stress. The deformation of the film taking place alongside with the evaporation of the solution increases the concentration near the pinned three phase contact line at the front of the film, which is closer to the source of the SAW, on the expense of the concentration at the rear. The increased concentration translates to the deposition of solute mass over an increased area near the front of the film, which explains the experimental observation.

From Discs to Ribbons Networks: The Second Critical Micelle Concentration in Nonionic Sterol Solutions

At the critical micelle concentration (CMC), amphiphiles self-assemble into spherical micelles, typically followed by a transition at the second CMC to cylindrical micelles that are uniform in width but are polydispersed in length and have swollen ends. In this Letter, we report on a new structural path of self-assembly that is based on discoidal (coin-like), rather than spherical, geometry; the nonionic sterol ChEO10 is shown to form monodisperse equilibrium disc assemblies at the first CMC, transitioning at the second CMC into flat ribbons that (like the cylindrical micelles) have uniform width, polydispersed length, and swollen ends. Increase in ChEO10 concentration or the temperature leads to ribbon elongation, branching, and network formation. This self-assembly path reveals that (1) surfactants can form equilibrium nonspherical assemblies at the CMC and (2) aggregate progression around the second CMC is similar for the disc and sphere geometries.

1-Hexanol triggered structural characterization of the worm-like micelle to vesicle transitions in cetyltrimethylammonium tosylate solutions

Incorporation of 1-hexanol close to the palisade layer of CTAT micelles favors transition of worm-like micelles to vesicular structuresviaformation of elongated worm-like micelles.

In vivo endothelial siRNA delivery using polymeric nanoparticles with low molecular weight

Dysfunctional endothelium contributes to more diseases than any other tissue in the body. Small interfering RNAs (siRNAs) can help in the study and treatment of endothelial cells in vivo by durably silencing multiple genes simultaneously, but efficient siRNA delivery has so far remained challenging. Here, we show that polymeric nanoparticles made of low-molecular-weight polyamines and lipids can deliver siRNA to endothelial cells with high efficiency, thereby facilitating the simultaneous silencing of multiple endothelial genes in vivo. Unlike lipid or lipid-like nanoparticles, this formulation does not significantly reduce gene expression in hepatocytes or immune cells even at the dosage necessary for endothelial gene silencing. These nanoparticles mediate the most durable non-liver silencing reported so far and facilitate the delivery of siRNAs that modify endothelial function in mouse models of vascular permeability, emphysema, primary tumour growth and metastasis.

Drug-loaded nanoparticles and supramolecular nanotubes formed from a volatile microemulsion with bile salt derivatives

The main objective of this study was to form nanoparticles of a model hydrophobic drug, celecoxib, from a volatile microemulsion stabilized by a bile salt derivative. Nanoparticles were obtained by conversion of the microemulsion nanodroplets with the dissolved drug into solid nanometric particles. The use of bile salt derivatives as the surfactants for the formation of a microemulsion enabled significantly higher loading of the drug in both the microemulsion and nanoparticles, compared with the native bile salt. In addition, superior stability of the particles was achieved with the bile salt derivatives, and drug crystallization was inhibited. Interestingly, differences in particle stability and crystallization inhibition were observed between two bile salt derivatives differing only by one hydroxyl group on the bile salt backbone, indicating the delicate balance of interactions in the system. For one of the derivatives, upon dispersion of the nanoparticles in water, they spontaneously arranged into well-defined elongated nanometric tubules as detected and attested by cryo-TEM. It was found that the drug present in nanoparticles induces formation of the nanotubes.

Structure and dynamics of poly(oxyethylene) cholesteryl ether wormlike micelles: rheometry, SAXS, and cryo-TEM studies

In this article, we provide direct evidence for 1-D micellar growth and the formation of a network structure in an aqueous system of poly(oxyethylene) cholesteryl ether (ChEO(20)) and lauryl diethanolamide (L-02) by rheometry, small-angle X-ray scattering (SAXS), and cryo-transmission electron microscopy (cryo-TEM). The ChEO(20) self-assembles into spheroid micelles above the critical micelle concentration and undergoes a 1-D microstructural transition upon the incorporation of L-02, which because of its lipophilic nature tends to be solubilized into the micellar palisade layer and reduces the micellar curvature. The elongated micelles entangle with each other, forming network structures of wormlike micelles, and the system shows viscoelastic properties, which could be described by the Maxwell model. A peak observed in the zero-shear viscosity (η(0)) versus L-02 concentration curve shifted toward higher L-02 concentrations and the value of maximum viscosity (η(0 max)) increased with the increasing ChEO(20) mixing fraction with water. We observed that η(0 max) increased by 2 to 4 orders of magnitude as a function of the ChEO(20) concentration. The Maxwell relaxation time (τ(R)) shows a maximum value at a concentration corresponding to η(0 max) (i.e., τ(R) increases with L-02 concentration and then decreases after attaining a maximum value, whereas the plateau modulus (G(0)) shows monotonous growth). These observations demonstrate microstructural transitions in two different modes: L-02 first induces 1-D micellar growth and as a result the viscosity increases, and finally after the system attains its maximum viscosity, L-02 causes branching in the network structures. The microstructure transitions are confirmed by SAXS and cryo-TEM techniques.

Fibrillar superstructure from extended nanotapes formed by a collagen-stimulating peptide

The nanostructure of a peptide amphiphile in commercial use in anti-wrinkle creams is investigated. The peptide contains a matrikine, collagen-stimulating, pentapeptide sequence. Self-assembly into giant nanotapes is observed and the internal structure was found to comprise bilayers parallel to the flat tape surfaces.

Carbohydrate modified catanionic vesicles: probing multivalent binding at the bilayer interface

This article reports on the synthesis, characterization, and binding studies of surface-functionalized, negatively charged catanionic vesicles. These studies demonstrate that the distribution of glycoconjugates in the membrane leaflet can be controlled by small alterations of the chemical structure of the conjugate. The ability to control the glycoconjugate concentration in the membrane provides a method to explore the relationship between ligand separation distance and multivalent lectin binding at the bilayer interface. The binding results using the O-linked glucosyl conjugate were consistent with a simple model in which binding kinetics are governed by the density of noninteracting glucose ligands, whereas the N-linked glycoconjugate exhibited binding kinetics consistent with interacting or clustering conjugates. From the noninteracting ligand model, an effective binding site separation of the sugar sites for concanavalin A of 3.6-4.3 nm was determined and a critical ligand density above which binding kinetics are zeroth order with respect to the amount of glycoconjugate present at the bilayer was observed. We also report cryo-transmission electron microscopy (cryo-TEM) images of conjugated vesicles showing morphological changes (multilayering) upon aggregation of unilamellar vesicles with concanavalin A.

Origins of the viscosity peak in wormlike micellar solutions. 1. Mixed catanionic surfactants. A cryo-transmission electron microscopy study

The rheology of wormlike micelles ("worms") formed by surfactants in water often follows nonmonotonic trends as functions of composition. For example, a study by Raghavan et al. (Langmuir 2002, 18, 3797) on mixtures of the anionic surfactant sodium oleate (NaOA) and the cationic surfactant octyl trimethylammonium bromide (OTAB) reported a pronounced peak in the zero-shear viscosity eta0 as a function of NaOA/OTAB ratio at a constant surfactant concentration (3 wt %). In this work, we study the origins of rheological changes in the NaOA/OTAB system and the relations between the composition and structural characteristics using cryo-transmission electron microscopy (cryo-TEM). When either surfactant is in large excess, the dominating morphology is that of spherical micelles. As oppositely charged surfactant is added to the mixture, the spheres grow into linear worms and these continue to elongate as the viscosity peak (which occurs at a 70/30 NaOA/OTAB ratio) is approached from either end. At the viscosity peak, the sample shows numerous long worms as well as a small number of branched worms. Taken together, NaOA/OTAB rheology can be primarily understood on the basis of micellar growth, which is explained primarily by packing arguments. While the size of the hydrophobic micellar core continuously decreases as the short amphiphile OTAB is added at the expense of NaOA, screening of charges goes through a maximum, which contributes to the asymmetry of the viscosity curve. With regard to micellar branching, there is no significant difference in the density of branched worms on either side of the viscosity peak. Therefore, it appears that in contrast to the behavior of some surfactant/salt systems, branching does not have a significant influence on the rheology of this mixed catanionic surfactant system. Instead, our data clearly indicate that the origin of the viscosity peak is linked with micellar growth and micellar shortening.

Alternating polymervesicles

We demonstrate here that the formation of polymer vesicles is not the exclusive realm of amphiphilic block copolymers. The natural alternating conjugation of hydrophobic alkyl maleates and hydrophilic polyhydroxy vinyl ethers under free-radical polymerization conditions also yields polymers with sufficient backbone amphiphilicity to form vesicles. In contrast to conventional polymersomes, these polymer vesicles have thin flexible shells capable of forming ultra-small unilamellar vesicles in water as confirmed by cryogenic-transmission electron microscopy (cryo-TEM), small-angle neutron scattering (SANS), and dynamic light scattering (DLS). The encapsulation and release characteristics of these alternating polymer vesicles are, however, similar to their surfactant counterparts.

Elucidating the assembled structure of amphiphiles in solution via cryogenic transmission electron microscopy

For the past twenty years, significant progress has been made in both developing cryogenic transmission electron microscopy (cryo-TEM) technology and understanding assembled behavior of amphiphilic molecules. Cryo-TEM can provide high-resolution images of complex fluids in a near state. Samples embedded in a thin layer of vitrified solvent do not exhibit artifacts that would normally occur when using chemical fixation or staining-and-drying techniques. Cryo-TEM has been useful in imaging biological molecules in aqueous solutions. Cryo-TEM has become a powerful tool in the study of -assembled structures of amphiphiles in solution as a complementary tool to small-angle X-ray and neutron scattering, light scattering, rheology measurements, and nuclear magnetic resonance. The application of cryo-TEM in the study of assembled behavior of amphiphilic block copolymers, hydrogels, and other complex soft systems continues to emerge. In this context, the usage of cryo-TEM in the field of amphiphilic complex fluids and self-assembled nano-materials is briefly reviewed, and its unique role in exploring the nature of assembled structure in liquid suspension is highlighted.