Gamma backscattering analysis of flaw types and orientation based on Monte Carlo GEANT4 simulations

In this study, we modeled the effects of flaws in a solid material as three different slit types (rectangular, rectilinear, and semicircular) and their orientations in a duralumin (aluminum alloy) plate in simulations based on 137Cs gamma backscattering. The simulations were performed using the Monte Carlo GEANT4 simulation toolkit. The simulation results showed that the shape of the slit had a small effect on the backscattering peak curve. Rotating the slit on the Y-axis and Z-axis of the duralumin plate influenced the 137Cs backscattering peak height in the energy range from 0.185 to 0.20 MeV, where the backscattering peak areas exhibited specific patterns due to the slit orientations.

Search for a Dark Matter-Induced Annual Modulation Signal in NaI(Tl) with the COSINE-100 Experiment

We present new constraints on the dark matter-induced annual modulation signal using 1.7 years of COSINE-100 data with a total exposure of 97.7 kg yr. The COSINE-100 experiment, consisting of 106 kg of NaI(Tl) target material, is designed to carry out a model-independent test of DAMA/LIBRA's claim of WIMP discovery by searching for the same annual modulation signal using the same NaI(Tl) target. The crystal data show a 2.7  cpd/kg/keV background rate on average in the 2-6 keV energy region of interest. Using a χ-squared minimization method we observe best fit values for modulation amplitude and phase of 0.0092±0.0067  cpd/kg/keV and 127.2±45.9  d, respectively.

First Direct Search for Inelastic Boosted Dark Matter with COSINE-100

A search for inelastic boosted dark matter (IBDM) using the COSINE-100 detector with 59.5 days of data is presented. This relativistic dark matter is theorized to interact with the target material through inelastic scattering with electrons, creating a heavier state that subsequently produces standard model particles, such as an electron-positron pair. In this study, we search for this electron-positron pair in coincidence with the initially scattered electron as a signature for an IBDM interaction. No excess over the predicted background event rate is observed. Therefore, we present limits on IBDM interactions under various hypotheses, one of which allows us to explore an area of the dark photon parameter space that has not yet been covered by other experiments. This is the first experimental search for IBDM using a terrestrial detector.

Background model for the NaI(Tl) crystals in COSINE-100

The COSINE-100 dark matter search experiment is an array of NaI(Tl) crystal detectors located in the Yangyang Underground Laboratory (Y2L). To understand measured backgrounds in the NaI(Tl) crystals we have performed Monte Carlo simulations using the Geant4 toolkit and developed background models for each crystal that consider contributions from both internal and external sources, including cosmogenic nuclides. The background models are based on comparisons of measurement data with Monte Carlo simulations that are guided by a campaign of material assays and are used to evaluate backgrounds and identify their sources. The average background level for the six crystals (70 kg total mass) that are studied is 3.5 counts/day/keV/kg in the (2-6) keV energy interval. The dominant contributors in this energy region are found to be 210 Pb and 3 H.

High-speed impact test using an inertial mass and an optical interferometer

A high-speed impact testing method for evaluating mechanical properties of materials is proposed using an inertial mass and a dual beat-frequencies laser Doppler interferometer (DB-LDI). In this method, an inertial mass levitated using an aerostatic linear bearing is made to collide with the material being tested at a high initial velocity. During the collision, the velocity of the mass, which is even higher than the critical velocity (±0.56 m/s) defined by the frequency difference of the Zeeman laser, is accurately measured using the DB-LDI. The position, acceleration, and impact force of the mass are calculated from the measured velocity. Using the proposed method, the mechanical properties of a visco-elastic material under a high-speed impact loading condition can be accurately evaluated.