Integrated imaging instrument for self-calibrated fluorescence protein microarrays

Protein microarrays, or multiplexed and high-throughput assays, monitor multiple protein binding events to facilitate the understanding of disease progression and cell physiology. Fluorescence imaging is a popular method to detect proteins captured by immobilized probes with high sensitivity and specificity. Reliability of fluorescence assays depends on achieving minimal inter- and intra-assay probe immobilization variation, an ongoing challenge for protein microarrays. Therefore, it is desirable to establish a label-free method to quantify the probe density prior to target incubation to calibrate the fluorescence readout. Previously, a silicon oxide on silicon chip design was introduced to enhance the fluorescence signal and enable interferometric imaging to self-calibrate the signal with the immobilized probe density. In this paper, an integrated interferometric reflectance imaging sensor and wide-field fluorescence instrument is introduced for sensitive and calibrated microarray measurements. This platform is able to analyze a 2.5 mm × 3.4 mm area, or 200 spots (100 μm diameter with 200 μm pitch), in a single field-of-view.

Dependence of the Second-order G'-band Profile on the Electronic Structure of Single-wal Nanotubes

We analyze the dependence of the second-order G'-band profile in terms of their (n,m) indices by measuring the resonance Raman spectra of several semiconducting and metalic isolated single wal carbon nanotubes. We show that this profile is very sensitive to the electronic structure, thus making it possible to get structural (n,m) information and to probe the splitting of the van Hove singularities in the electronic density of states due to the trigona warping effect.

Raman Analysis of Carbon Nanotube Bundles for Bio-electronic Applications

Three different types of carbon nanotubes being considered for bio-recognition experiments were studied using resonance Raman spectroscopy. Raman spectroscopy, taken using several laser excitation energies, has been shown to provide an effective characterization tool for these carbon nanotubes. The technique yields structural information that both complements and corroborates structural information obtained using electron microscopy techniques, such as TEM, SEM, and AFM.

Multiplexed, rapid point of care platform to quantify allergen-specific IgE

Variation of probe immobilization on microarrays hinders the ability to make high quality, assertive and statistically relevant conclusions needed in the healthcare setting. To address this problem, we have developed a calibrated, compact, inexpensive, multiplexed, dual modality point-of-care detection platform that calibrates and correlates surface probe density measured label-free to captured labeled secondary antibody, is independent of chip-to-chip variability, and improves upon existing diagnostic technology. We have identified four major technological advantages of our proposed platform: the capability to perform single spot analysis based on the fluorophore used for detection, a 10-fold gain in fluorescence signal due to optimized substrate, a calibrated, quantitative method that uses the combined fluorescent and label-free modalities to accurately measure the density of probe and bound target for a variety of systems, and a compact measurement platform offering reliable and rapid results at the doctor's office. Already, we have formulated over a 90% linear correlation between the amount of probe bound to surface and the resulting fluorescence of captured target for IgG, β-lactoglobulin, Ara h 1 peanut allergen, and Phl 5a Timothy grass allergen.

High-throughput detection and sizing of individual low-index nanoparticles and viruses for pathogen identification

Rapid, chip-scale, and cost-effective single particle detection of biological agents is of great importance to human health and national security. We report real-time, high-throughput detection and sizing of individual, low-index polystyrene nanoparticles and H1N1 virus. Our widefield, common path interferometer detects nanoparticles and viruses over a very large sensing area, orders of magnitude larger than competing techniques. We demonstrate nanoparticle detection and sizing down to 70 nm in diameter. We clearly size discriminate nanoparticles with diameters of 70, 100, 150, and 200 nm. We also demonstrate detection and size characterization of hundreds of individual H1N1 viruses in a single experiment.

LED-based interferometric reflectance imaging sensor for quantitative dynamic monitoring of biomolecular interactions

Label-free optical biosensors have been established as proven tools for monitoring specific biomolecular interactions. However, compact and robust embodiments of such instruments have yet to be introduced in order to provide sensitive, quantitative, and high-throughput biosensing for low-cost research and clinical applications. Here we present the Interferometric Reflectance Imaging Sensor (IRIS) using an inexpensive and durable multi-color LED illumination source to monitor protein-protein and DNA-DNA interactions. We demonstrate the capability of this system to dynamically monitor antigen-antibody interactions with a noise floor of 5.2 pg/mm(2) and DNA single mismatch detection under denaturing conditions in an array format. Our experiments show that this platform has comparable sensitivity to high-end label-free biosensors at a much lower cost with the capability to be translated to field-deployable applications.